Repair/maint of Fans, Geysers, Submain Wiring, DB, Street Lights including misc allied work at MIRC under GE (S) Ahmednagar

Amount

Taking down, strip opening, cleaning all parts and packing of ceiling fan of any make and size and greasing ball bearing with specified quality grease and re-assembling the ceiling fan as a one unit, complete all as specified and as directed. Note : Replacement of spare parts, rewinding, painting, cable for connection etc to be measured and paid separately under relevant items of Sch 'A' mentioned here in after.

All as per serial item No 01 above but of exhaust fan any make and any size

Taking down, strip opening, cleaning all parts and packing of Table fan/Cabin fan/Air circulating fan/ wall mounting fan of any make and size and greasing ball bearing with specified quality grease and re-assembling the fan as a one unit and fixing in position and re-commissioning the same including making electric connection complete all as specified and as directed. Note : Replacement of spare parts, rewinding, painting, cable for connection etc to be measured and paid separately under relevant items of Sch 'A' mentioned here in after.

S & F stepped type electronic fan regulator, flush type on the existing phenolic laminated sheet etc. all as specified and as directed.

M & L in repairs, short circuit /over heated winding from stator of ceiling fan of any make, 1200 mm sweep with new winding of matching gauge and turns of super enamelled copper winding wire complete with leathered paper, glass sleeves, varnishing, baking etc all as specified and as directed.

All as per serial item No 05 but ceiling fan 1400mm sweeps.

All as per serial item No 05 but exhaust fan not exceeding 300mm Sweep.

All as per serial item No 05 but exhaust fan exceeding 300mm but not exceeding 450mm sweep

All as per serial item No 05 but Table fan/Air circulating fan/Cabin fan/Wall mounting fan, any make and any sweep.

S&F in repairs, ball bearing No 6201 suitable for ceiling fans all as specified and as directed.

S&F in repairs, ball bearing No 6202 suitable for ceiling fans all as specified and as directed.

S&F in repairs, canopy (top and bottom) of ceiling fans any make / size with canopy of matching colour all as specified and as directed..

S&F in repairs, rubber reel with nut, bolts, split pins etc of ceiling fan with rubber reel heavy duty for hanging fan all as specified and as directed..

S&F in repairs, down rod of 15mm bore medium grade GI pipe 0.45 metre long with clamps, bolts, nuts, split pins washers of suitable size of approved quality for ceiling fan all as per specified and as directed.

All as per serial item No 14 but 0.60 metre long.

All as per serial item No 14 but 1.5 metre long.

S&F in repairs, connector block of ceiling fan of suitable size of approved quality all as per specified and as directed..

S&F in repairs, capacitor of ceiling fans with capacitor having 2.5mfd, 240 Volts all as per specified and as directed..

All as per serial item No 18 but capacity 3.15mfd.

All as per serial item No 18 but capacity 4mfd.

M&L in repairs, cable/wire, 2 core of size 23/0.0076. for connection of fan all as per specified and as directed..

Taking down carefully water Geyser 25/50 ltrs capacity by unscrewiring nuts bolts, water inlet/outlet pipes from walls/foundation complete for repairs and refixing in position after carrying out under mentioned repair including making connectin to the water inlet, outlet pipe, electric connection and testing complete all as specified and as directed. Note : S&F in repairs of spare parts will be measured and paid separately.

Prepairing the old painted surfaces of 25 ltrs capacity geyser by scraping and rubing and painting with one thick coat of synthetic enamel white paint by spray gun complete including proper drying, writing MES No all as specified and as directed.

Prepairing the old painted surfaces of 50 ltrs capacity geyser by scraping and rubing and painting with one thick coat of synthetic enamel white paint by spray gun complete including proper drying, writing MES No all as specified and as directed.

M&L in repairs for cord flexible PVC insulated size 40/0.0076 three core copper conductor cable from geyser to 15 amp socket/ Metal clad complete all as specified and as directed.

S&F in repairs, base assembly of 25 ltrs capacity geyser with inlet and outlet pipe made out of copper base plate with gasket and proper size of nuts, bolts & washers etc all as specified and as directed.

All as per serial item No 26 but of capacity 50 ltrs

S&F in repairs, geyser element 1.5 KW, rubber gasket type, including rubber gasket all as specified and as directed.

S&F in repairs, geyser element 2 KW, rubber gasket type, including rubber gasket all as specified and as directed.

S&F in repairs, geyser safety valve (Pressure release valve) complete suitable for vertical type geyser all as specified and as directed.

S&F in repairs, 15mm bore size non return valve, made out of brass fixed in vertical position specified and as directed.

S&F in repairs, outer tank sheet cover, made out of MS sheet of suitable size for geyser of size 25 ltrs capacity vertical type complete all as specified and as directed.

S&F in repairs, outer tank sheet cover, made out of MS sheet of suitable size for geyser of size 50 ltrs capacity vertical type complete all as specified and as directed.

S&F in repairs, inner tank, made out of copper sheet of suitable size for geyser of capacity 25 ltrs (vertical type) all as specified and as directed.

S&F in repairs, inner tank, made out of copper sheet of suitable size for geyser of capacity 50 ltrs (vertical type) all as specified and as directed.

S&F in repairs, indicator lamp, 220 Volts, AC suitable for existing 25/50 ltrs capacity of geyser all as specified and as directed.

S&F in repairs, sheet metal enclosures with plug socket, single pole and neutral with two pin and earth plug, including one MCB of 20 Amps (SP) complete all as specified and as directed.

S&F in repairs, ISI marked PVC connection pipe 300mm long with brass end terminal all as specified and as directed.

S&F in repairs, thermostat switch, pointer type, suitable for 25/50 ltrs capacity geyser with adjustment knob complete all as specified and as directed.

Supply and proper filling glass wool in between inner and outer tank of geyser complete all as specified and as directed.

M&L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible FRLS copper conductor 1100Volts grade cables 10 Sqmm drawn through and including PVC heavy duty surface casing caping including 10 Sqmm 1100Volts grade PVC insulated unsheathed multi stranded flexible FRLS copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & as directed. NOTE: 1.Proper colour coding shall be adoptd for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black) 2.Two run of 10 sq.mm for one run for phase,one run for neutral with one run of 10 sqmm cable for earth and one run of PVC casing & caping shall be measured as one unit.

All as per serial item No 41 but two single core 6 Sqmm cables for phase & neutral, one single core 6 Sqmm cable as continuous earth wire.

All as per serial item No 41 but two single core 4 Sqmm cables for phase & neutral, one single core 4 Sqmm cable as continuous earth wire.

All as per serial item No 41 but two single core 2.5 Sqmm cables for phase & neutral, one single core 2.5 Sqmm cable as continuous earth wire.

S&F in repairs, factory made, powder coated sheet metal enclosure, TPN Vertical Distribution Boards with MCCB four pole, 25 KA, 100 Amp with fixed thermal and magnetic settings as incomer IP43 protection Double Door : Plain 4 way with suitable rated busbar and MCB SP 32 Amp-12 Nos as outgoings complete all as specified and as directed

S&F in repairs, sheet metal enclosure (Factory made) double door shutter type for distribution board (when MCBs are to be used), single pole and neutral, 240 volts, 8 way, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3,suitable for flush mounting and surface mounting,with 100 Amps rated copper busbar,with Neutral bar,Earthbar and cable lies for cable managment,fully shrouded, Neutral bars,prefittes masking sheet complete all as specified and as directed. Make: Havells,Cat No:DHDMSHODDW08 or equivalent make:Legrand/HPL/Indo Asian/ L&T

S&F in repairs, sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), tripple pole and neutral, 415 volts, 4 way, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3,suitable for flush mounting and surface mounting,with 100 Amps rated copper busbar,with Neutral bar,Earthbar and cable lies for cable managment,fully shrouded, Neutral bars,prefittes masking sheet complete all as specified and as directed. Make:Havells,Cat No:DHDMTH0DDW04 or equivalent make:Legrand/HPL/Indo Asian/ L&T

S&F in repairs, sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), single pole and neutral, 240 volts, 4 way protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3,suitable for flush mounting and surface mounting,with 100 Amps rated copper busbar,with Neutral bar,Earthbar and cable lies for cable managment,fully shrouded, Neutral bars,prefittes masking sheet complete all as specified and as directed.Make: Make:Havells,Cat No:DHDMSHODDW04 or equivalent make:Legrand/HPL/Indo Asian/ L&T

S&F in repairs, MCB SP, AC 240 V, 6 to 32 Amps 10 KA capacity ,'c' series, making connection with suitable size of copper lugs etc complete all as specified and as directed. Make:Havells cat no DHMGBSPF006-32 or equivalent make in legrand/HPL/Indo Asian/L&T

S&F in repairs, MCB SPN, AC 240 V, 6 to 40 Amps, 10 KA capacity ,'c' series, making connection with suitable size of copper lugs etc complete all as specified and as directed. Make:Havells cat no DHMGCSNF006-040 or equivalent make in legrand/HPL/Indo Asian/L&T

S&F in repairs, ISOLATOR, TPN, AC 415 V, 63 amps, 10 KA capacity , 'B' series, making connection with suitable size of copper lugs etc complete all as specified and as directed

M&L for repairs to DBs of different type complete with replacement of MCBs, welding works to doors, replacement of unserviceable hinges all drop bolt and replacement of burnt copper wires complete all as specified and as directed. Note: MCBs are measued and paid separetely.Note:all accessories like wires,bolts,nuts are inclusive in quoted Rates.

S&F in repairs, ultra slim square profile LED lighting fixture with extruded polycorbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitting 20 Watt with LED light source 6500k with uniform light output,with all accessories including its connection with 2 core seathed copper conductor cable of size 0.5 sqmm with complete with all as specified and as directed. Make:HAVELLS E-LITE LED PRIDE PLUS NEO Cat No LHEXACP7IN1J020 or equivalent makes in CG/ Philips /wipro/ Luker/ Halonix/Century LED.

S&F in repairs, ultra slim square profile LED lighting fixture with extruded polycorbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitting 10 Watt with LED light source 6500k with uniform light output,with all accessories including its connection with 2 core seathed copper conductor cable of size 0.5 sqmm with complete with all as specified and as directed. Make:HAVELLS E-LITE LED PRIDE PLUS NEO Cat No LHEXACP5IN1W010 or equivalent makes in CG/ Philips /wipro/ Luker/ Halonix/Century LED.

S&F Lumeno LED Bulb 10 Watt (Cool day light) having colour temp 6500 K and lumen output 900 suitable for B-22 type to fix on batten holder and wall light etc complete all as specified and as directed. Make :Havells cat No LHLDEUEEML8R010 or equivalent makes in CG/ Philips /wipro/ Luker/ Halonix/Century LED.

S&F in repairs, energy saver bulkhead, designed 6.5 W LED, 6000 K for modern homes available with premium quality diffuser for glarefree light and easy to install snapfit installer all as specified and as directed. Make :Havells cat No LHEXCGP7PN5W006 or equivalent makes in CG/ Philips /wipro/ Luker/ Halonix/Century LED.

S&F in repairs, 15 watt, post top lantern, new generation, energy saving, environmental friendly, long life aesthertically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source and IP-65 protection all as specified and as directed. Make : Havells Cat No RUBYMINIPT15WLED757PSYMTOPC or equivalent makes in CG/ Philips /wipro/ Luker/ Halonix/Century LED.

S&F in repairs, security light of building with single piece, new generation energy saving and environmental friendly long life LED 30W made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07 including one bracket made of Light grade GI Pipe 25 mm dia 1.5 mtr long fixed to wall/ pole with two clamps made out of mild steel flat iron 40 mm x 5 mm and connect to nearest electric supply by three core 1.5 sqmm aluminim cable all as specified and as directed. Make :Havells Cat No ENDURACITYLITEPLATSL30WLED757SASYBOPC or equivalent makes in CG/ Philips /wipro/ Luker/ Halonix/Century LED.

S&F in repairs, gate light, made up of high grade unbreakable polycarbonate material suitable for retrofit 1x7 W LED Lamp (B22 base) - Moon 150 all as specified and as directed. Make:Havells Cat no LHFXBON1TN5Q008 or equivalent makes in CG/ Philips /wipro/ Luker/ Halonix/Century LED..

S&F in repairs, gate light, made up of high grade unbreakable polycarbonate material suitable for retrofit 1x20 W LED Lamp (B22 base) - Moon (PRISMAT IC) all as specified and as directed. Make:Havells Cat no LHFXBON1TN6F035 or equivalent makes in CG/ Philips /wipro/ Luker/ Halonix/Century LED...

M&L in repairs/replacement for earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia , by means of nut bolts, check nuts and washer of the GI . Earth wire connected upto main earth point/DBs alongwith 15mm dia GI pipe, medium grade, including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4) cover with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion.

M&L for disconnecting and taking down unserviceable street light fittings/gate lights & garden lights of any type/rating from pole or wall, dismantling the same for necessary repair or replacment of unserviceable spares complete and refixing, connecting and testing the same all as specified and as directed. Notes:- (i) Spares/ accessories required for replacement shall be measured and paid sepratley as supply only under respective items of BoQ. However fixing in repairs shall be included in the quoted rate of this item. (ii) T&P required for repair/ mantenance such as ladder, vehicle like crane, manpower etc, shall be included in the quoted rate of this item.

Supply only of copper ballast suitable for 70 watt HPSV/MH lamp fitting all as specified and as directed.

Supply only of copper ballast suitable for 150 watt HPSV/MH lamp fitting all as specified and as directed.

Supply only of copper ballast suitable for 250 watt HPSV/MH lamp fitting all as specified and as directed.

Supply only single ended, clear, tubular lamp of 150 watt MH all as specified and as directed.

Supply only single ended, clear, tubular lamp of 250 watt MH all as specified and as directed.

Supply only Ignitor suitable for HPSV lamp fitting of rating 150/250 watt all as specified and as directed.

Supply only surge protection devices compatible with industrial & outdoor LED fixtures of 30 Watt as per existing make and model all as specified and as directed.

All as per serial item No 69 but for 50 Watt LED fitting

All as per serial item No 69 but for 60 Watt LED fitting

All as per serial item No 69 but for 90 Watt LED fitting

All as per serial item No 69 but for 120 Watt LED fitting

Supply only LED drivers compatible with industrial & outdoor LED fixtures/Sign boards of 30 Watt LED fitting as per existing make and model all as specified and as directed.

All as per serial item No 74 but for 50 Watt LED fitting

All as per serial item No 74 but for 60 Watt LED fitting

All as per serial item No 74 but for 90 Watt LED fitting

All as per serial item No 74 but for 100 Watt LED fitting

All as per serial item No 74 but for 120 Watt LED fitting

All as per serial item No 74 but for 160 Watt LED fitting

S&F GI pipe bracket, light grade, 40mm dia, 1.5m long, ISI marked, duly bent to shape with required angle including clamps, nuts, bolts, washers etc complete including dismantling of existing old bracket, all as specified and as directed.

S&F GI pipe bracket, light grade, 50mm dia, 1.5m long, ISI marked, duly bent to shape with required angle including clamps, nuts, bolts, washers etc complete including dismantling of existing old bracket, all as specified and as directed.

S&F in repairs, PVC insulated and over all PVC sheathed, stranded copper conductor wire 1.5 sqmm x 3 core ISI marked, connected from fitting to pole junction box complete all as specified and as directed.

M&L for disconnecting jumpers of street light fittings from OH LT line and remove carbon and replace the damaged jumpers, refixing, connecting and testing the same complete all as required at site as directed. Note: T&P required for repair/ mantenance such as ladder, vehicle like crane, manpower etc, shall be included in the quoted rate of this item.

M&L for 2.5 sq, mm 2 core,1100 volts grade, heavy duty cable, PVC insulated, aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections twin core cable flat stranded conductor including taking down old unserviceable cable all as specified and as directed.

All as per serial item No 85 but 4 sq. mm 2 core cable

All as per serial item No 85 but 10 sq. mm 2 core cable

S&F in repairs, junction box of size 255 mm x 205 mm x 112 mm with bus bar and MCB 6 Amp, SP and fixing on poles with MS clamps and connecting with existing cable. Junction box shall be insulated and made out of Polycarbonate, environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid & anti corrosive. The junction box shall be rated for Degree of Ingress Protection IP 66 in accordance with IEC 60529. For better safety the Polycarbonate enclocure shall be fire retardant & self-extinguishing complete all as specified and as directed.

M&L in repairs, unserviceable time switch accessories/ spares including reconnecting and testing complete all as specified and as directed. Note : - Spares/accessories required for repairs/replacement shall be measured and paid sepratley under respective items of BOQ as supply only, However fixing in repairs is included in this item.

Supply only time switch, digital type, single phase, 230 Volts, 50 Hz of rating 20 Amps, all as specified and as directed.

Supply only contactor, 2 pole, 25 Amps, main pole configuration 230 volts fixing with existing box by suitable size of copper cable with suitable size of lugs complete all as required at site and as directed.

Supply only contactor, 4 pole, 40 Amps, main pole configuration 415 volts fixing with existing box by suitable size of copper cable with suitable size of lugs complete all as required at site and as directed.

Supply only contactor, 4 pole, 63 Amps, main pole configuration 415 volts fixing with existing box by suitable size of copper cable with suitable size of lugs complete all as required at site and as directed.

Supply only MCB, TPN, 40 Amps, 10 KA, 50 Hz, 415 Volts all as specified and as directed.

Supply only MCB, TPN, 63 Amps, 10 KA, 50 Hz, 415 Volts all as specified and as directed.

M&L in repairs for lowering of high mast lantern carriage for disconnecting and taking down unserviceable high mast light fittings of any type/rating, dismantling the same for necessary repair or replacment of unserviceable spares and refixing, connecting, testing including raising high mast lantern carriage to its original position complete all as required at site and as directed. Notes:- (i) Spares/accessories required for repairs/replacement shall be measured and paid sepratley under respective items of BoQ. (ii) T&P required for repair/ mantenance such as ladder, vehicl, menpower etc, shall be included in the quoted rate of this item.

M&L for repairing of highmast for electrical operation of raising and lowering of lantern carriage with its supporting stand complete as required at site and as directed by Engr-in Charge including following work:- (a) Fixing, connecting and testing of existing stainless steel wire rope of 6mm dia (97/19 construction) with double drum winch (b) Repair / servicing of integral power tool, three phase, high powered, reversible with mechanical tripping facility. (c) Renewal of trailing cable, flexible Copper 5 core 2.5 Sqmm through shaft. (d) Repair of manual lowering hoisting chain link mechanism Notes:- (i) Spares/accessories required for replacement shall be measured and paid sepratley under respective items of BoQ. (ii) T&P required for repair/ mantenance such as ladder, vehicl, manpower, welding cutting arrangement etc, shall be included in the quoted rate of this item.

Dismantling, opening, rewinding and refixing 3.0 HP motor, three phase, 415 V, 50 Hz motors with super enamelled copper wire of existing gauge and existing class insulation including superior quality varnishing, heating / drying coils, making connections from coil to terminal box, spray painting with two coats of synthetic enamel paint, necessary mechinical works for shaft / bearing housing, renewal of DE and NDE bearings, transportation from installation to workshop & back, connecting, testing and commissioning at site for satisfactorily operation as required.

Supply only starter in replacement, suitable for 3.0 HP motor, three phase, 415 V , AC supply with forward/ reverse switch for High mast raising and lowering of lantern carriage with its supporting stand all as specified and as directed.

Supply only PVC insulated and over all PVC sheathed, stranded copper conductor wire 4.0 sqmm x 5 core ISI marked all as specified and as directed. .

M&L for repairing of highmast light panels complete with necessary welding works to doors, replacement of unserviceable including wiring, fixing of time Switch , contactor & MCB etc all as specified and as directed at site Notes:- (i) Spares/accessories required for replacement shall be measured and paid sepratley under respective items of BoQ. (ii) T&P required for repair/ mantenance such as ladder, vehicl, manpower, welding cutting arrangement etc, shall be included in the quoted rate of this item.

Taking down old unserviceable street light/flood light from street light poles of any type & fixing only street/flood light fittings of any capacity/type including connection from junction box/OH line to fittings and testing complete all as specified and as directed. Note- Street lights/flood lights will be issued under Sch'B' "FREE FOR FIXING only"

S&F in repairs, post top lantern light, decorative type, post top for 360 degree, indirect light, IP 65 protection, resistant to impact and corrosion, glare-free and better uniformity 15 watt LED 230 V 50 Hz including necessary fitting accessories complete all as specified and as directed. Make : Havells cat No. CORALMINIPT15WLED757PSYMTOPC or equivalent in Philips/ Wipro/Crompton/ Luker/ Halonix/ Century LED

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of cable or pits not exceeding 10 sqm area, and getting out in any type of soil all as specified and as directed.

Returning, filling in trenches including spreading levelling watering and well ramming in layer not exceeding 25 cm thick in soil all as specified and as directed.

Removing excavated soil to a distance n,exc 50 m and depositing where directed at a level n,exc.1.5 m above the starting point complete all as specified and as directed.

M & L for HDPE pipe (PE 100, SDR 21, 6Kgf/Sqcm PN06) 50 mm bore, for laying of LT cables etc complete with all accessories complete all as specified and as directed.

Supply and laying in repairs/replacement of LT under ground PVC insulated armoured aluminium conductor cable, 6 Sqmm 2 core, fixing to pole/in trenches/panel boards complete all as specified and as directed. Note : Excavation & earth work shall be meassured and paid for seperately.

All as per serial item No 109 but 10 sqmm 2 core cable.

All as per serial item No 109 but 10 sqmm 4 core cable.

All as per serial item No 109 but 16 sqmm 4 core cable.

Supply and errect in true vertical steel tubular swaged pole complete with MS Box plate 6 mm thick of size 300 x 300 mm finial taper plug, cap, bolt, nuts washers & screws as specified type 410-SP-31 (9 mtr long) Made out of ERW MS tubing confirming to IS-2713 Part II including drilling holes of required size for fixing cross arms etc painting with two coat of aluminium paint over a coat of red oxide primer including demolition of concrete foundation and taking out existing steel pole all as specified and as directed.

M&L for PCC 1:3:6, type C2, using 40 mm graded stone aggregates as in foundation of pole all as specified and as directed.

M&L for PCC 1:2:4, type C1, using 20mm graded stone aggregates as in coping including necessary form work and fair finishing exposed surface of concrete all as specified and as directed.

Labour only for trimming/cutting of tree branches touching HT/LT overhead lines wide growth around poles and making clear span of 2m all around OH line with pole and plants all as directed by Engineer-in-Charge. Note : (i) Written shut down shall be obtained from concerned JE/AGE (E/M) before taking the trimming work in hand by contractor. (ii) Span from one pole to next pole (30 to 50 RM) will be considered as a one Job (iii) Any damage caused due to negligence of workmen will be rectified without any extra payment (iv) T & P such as ladder, rope, cutter, Axes and other related material will be provided by the contractor.

Supply and laying light grade galvanised steel tube 40mm bore light grade for protection of cable complete all as directed by Engineer-in-Charge.

Labour for drilling hole under road for laying of underground cable through pipe of suitable size and making good complete all as specified and directed at site.

Supply, install, testing and commissioning factory made and tested (including CPRI type test certified) LT feeder pillar box (KIOSK) out door type, floor mounted, compartmantalised and IP-54 suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, all as specified and directed, having bus bar chamber with insulated copper bus bars installed on porcelain insulators. The panel shall be dust and vermin proof, made of 3.15mm CRCA MS sheet and with base frame of 40x40x6mm angle iron , powder coated, Front and rear opening type with aprons for cable entry with double door shutter and locking arrangement with and including following items. (Location- MAP PH I) NOTE: Cost of dismantling/ taking down old unserviceable LT feeder piller box and mild steel frame shall be included in the quotedd rate of this item. Incoming :- (a) MCCB 200 amps, 4 pole, 25 KA, 415 volts grade, with thermal magnetic - 01 No (b) Bus bar electrolytic grade copper and supported on Non-hygroscopic, non carbonising, corrosion resistance SMC insulators 300 Amp, 4 pole, mounted on insulators for incomming supply - 01 Set. (c) Volt meter and Amp meter 415 volts, 50 Hz AC supply -01 set. (d) Neon indicating lamps (R, Y & B) -01` Set. Outgoing :- (a) MCB TPN 63 amps, 4 pole, 10 KA , 415 volts, 50 Hz - 05 No. (b) MCB SPN 40 amps, 10 KA , 230 volts- 01 No.

BHAVIN INFRA

ASHWAMEDH ENGINEERS