Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹65.5 LAccepted-AOC 155 KARNAL NEW GRAIN MARKET KARNAL KARNAL HARYANA 132001 | KARNAL | HARYANA | 132001 | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹67.8 L+₹85,275 (1.27%)Rejected-Finance | L2 | Rejected-Finance Other than L1 bidder | |
| 3 | L3₹71.7 L+₹4.7 L (7.00%)Rejected-Finance C O GIVEN GOD NONGTDAU ARBUTHNOT ROAD NONGRIMMAW LAITUMKHRAH SHILLONG PIN 793011 | SHILLONG | EAST KHASI HILLS | MEGHALAYA | 793011 | L3 | Rejected-Finance Other than L1 bidder | |
| 4 | L4₹77.3 L+₹10.3 L (15.4%)Rejected-Finance | L4 | Rejected-Finance Other than L1 bidder | |
| 5 | L5₹87.4 L+₹20.4 L (30.4%)Rejected-Finance | L5 | Rejected-Finance Other than L1 bidder |
Tender Value
₹79 L
EMD Value
₹1.4 L
Closing Date
11 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Shillong
HQ CWE Shillong, SE Falls, Shillong - 793011
MAINTENANCE/REPAIR OF MISC B/R WORKS IN MD ACCN AND OTM AT CERTAIN LOCATIONS AT SHILLONG CANTT UNDER GE SHILLONG
2022_MES_561752_2
8613/SHL/E8
Open Tender
Civil Works
Item Rate
180 days
Shillong
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
GE Shillong
₹1.4 L
Yes
10 Feb 2023
21 Dec 2022
12 Jan 2023
21 Dec 2022
11 Jan 2023
28 Dec 2022
Amount
Dismantling of plain or corrugated steel sheeting any guage thickness including nainital or similar pattern roof covering complete all as specified and directed.
Dismantling of timber scantling 40 sqcm over in section in any position (unframed work) complete all as specified and directed.
Dismantling of timber scantling in fillet, rail, post, rafter, purlin etc under 40 sqcm in section unframed work ) complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi-corrugated etc.) sheets in roof covering) complete all as specified and directed.
Dismantling boarding any description fixed in any position with nails complete all as specified and directed.
Dismantling of wall/ceiling board (fibre, pulp, insulation etc.) or insulation board/ slab/ blanket, any thickness including cover fillet ) complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises) complete all as specified and directed.
Dismantling stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar etc.) complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness (below/above ground level) ) complete all as specified and directed.
Demolition of concrete of any description and in any position not otherwise specifically provided for.
Demolition of Brickwork or stone/boulder masonry or precast concrete block walling, built in cement mortar including all quoin, arche, pillar etc, but excluding ashlar facing, dressed stonework built in cement mortar complete all as specified and directed.
Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc ) complete all as specified and directed.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) not exceeding 1.5 Sqm each complete all as specified and directed.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.
Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each complete all as specified and directed.
Taking down shutter of any description exceeding 1.0 Sqm and not exceeding 2 Sqm each and refixing in same opening complete all as specified and directed.
Demolition and breaking up drain pipes 100 mm bore (salt glaged ware AC or reinforced concrete) set in cement mortar complete all as specified and directed.
Resecuring or easing & adjusting without taking down shutter of any description exceeding 1.0 Sqm and not exceeding 2 Sqm each complete all as specified and directed.
Resecuring or easing & adjusting without taking down shutter of any description not exceeding 1.0 Sqm each complete all as specified and directed.
Supply and fix CGI 0.63 mm thick galvanised, corrugated, mild steel sheeting with two corrugations side lap, fixed with coach screws and washers in roof, wall etc with grade of zinc coating 120 gms/Sqm fixed with 1-type or J-type bolt complete all as specified and directed.
Supply and fix PGI 0.63 mm thick mild steel sheeting in ridge hip valley gutter drip and straight flashing (length and girth as fixed) with grade of zinc coating 120 gms/Sqm complete all as specified and directed.
Material and labour pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering of tensile strength 550 MPA including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed.
Material and labour pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in roof covering of tensile strength 550 MPA including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed
Fixing only (except sheeting) pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet (any thickness) as in roof covering of tensile strength 550 MPA including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed
Material and labour for second class hard wood in scantling clean sawn timber fixed complete all as specified and directed.
Material and labour preparing surfaces of wood and wood based materials, new or old, of any and girth, not otherwise described and treated with two coats of Creosote complete all as specified and directed.
Material and labour plain fillet square rectangular or triangular in section bull-nosed, splayed, chamfered or rounded on one edge or face secured with nails or brads (second class hard wood) sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm complete all as specified and directed.
Supply and fix 40mm thick second class hard wood boarding in floor and skirting plained one side with butt joint and fixed with nails complete all as specified and directed.
Supply and fix 20mm thick second class hard wood boarding in eave board/fascia plained both sides with butt joint and fixed with nails complete all as specified and directed.
Material and labour for 6mm thick plywood, grade BWR type BB fixed to timber frame work with nail complete all as specified and as directed.
Material and labour for 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face on one side fixed with screws to timber frame work on wall all as specified and as directed.
Material and labour for preparation of old treated wooden surface of any description over 10 cm in width or girth with one coat of french polish including cleaning and preparing the surface including a coat of wood filler on new work with two or more coats complete all as specified and directed.
Material and labour for 18/19 mm thick pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination as in kitchen cabinet/cup-board completed all as specified and directed.
Supply and fix continuous (Piano) hinge, brass, width of flap 40 mm (when open) complete all as specified and directed.
Supply and fix magnet catches for cupboard shutter, brass body and striking plate with 8mm bore steel ball including letting in complete all as specified and directed.
Supply and fix extruded brass handle, 100 mm size, fabricated type, polished all as specified and directed.
Supply and fix anodised aluminium frame work for snap grid false ceiling comprising of Gl perimeter channel 0.55 mm thick with main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each, Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mm c/c using GI hanger of 6mm bore GI frame will be 60 x 60 cm to receive E-board ceiling complete all as specified and directed.
Material and labour for non asbestos fibre cement building board of 4mm thick fixed or laid/ inserted to timber/ GI/ Aluminium framework with screw fixed in ceiling flat or sloping complete all as specified and directed.
Material and labour for applying two coats of distemper oil emulsion on ceiling over and including a coat of chalk whitening including preparation of new or undecorated surface complete all as specified and directed.
Material and labour fillet plain or bull-nosed, splayed, chamfered, or rounded on one face or edge in section wrought secured with nails or brads (second class hard wood) sectional area exceeding 3 Sqcm but not exceeding 6 Sqcm all as specified and directed.
Material and labour for preparation of new or previously untreated wooden surface of any description not exceeding 10 cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.
Material and labour for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
Material and labour for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
Material and labour for non skid coloured joint free ceramic tiles, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
Material and labour for non skid, coloured, joint free ceramic tiles, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour over 10mm thick rendering in cement mortar 1:4 complete all as specified and directed
Material and labour for non skid coloured, joint free ceramic tiles, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
Material and labour for non skid, coloured, joint free ceramic tiles, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
Material and labour for non skid, coloured, joint free ceramic tiles, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour over 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Material and labour for glazed ceramic coloured tiles in vertical surface of size 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white of colour cement to match with the tile colour over 10mm thick backing coat in cement mortar 1:4 complete as specified and directed.
Material and labour for machine pressed pre polished chequered cement concrete tiles 20cm x 20cm x 25mm thick over 15mm thick screed bed in cement mortar 1:4 set & jointed in neat cement slurry with white cement and pigments as in floor complete all as specified and directed.
Material and labour for granite 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of other than white and black, complete all as specified and directed.
Material and labour machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.
Material and labour for sand filling under floor including watering and consolidation for laying of interlocking paver blocks complete all as specified and directed.
Material and labour for PCC (1:2:4) Type B-0, (12.5mm graded stone aggregate) 40mm thick as in floor finished even and fair using extra cement complete all as specified and directed.
Material and labour for PCC 1:2:4 type B1 (Using 20 mm graded stone aggregate) as in steps, parapets, railings upto 60cm in height, coping, bed plates etc, and similar works including weathering, slightly rounded or chamfered angles and throating including necessary from work all as specified and directed.
Material and labour for 100mm thick cement concrete using (40mm graded stone aggregate) type D-2 (1:4:8) complete all as specified and directed.
Material and labour for 75mm thick cement concrete using (40mm graded stone aggregate) type B-2 (1:2:4) complete all as specified and directed.
Material and labour for PCC 1:3:6 type C-2(using 20 mm graded stone aggregate) 75mm thick as in plinth protection finished even and fair without using extra cement layed in bays not exceeding 2.00m and joints filled with bitumen sand mastic with ratio (1:3 ) complete all as specified and directed.
Material and labour for 25 mm thick cement concrete 1:2:4, Type B-0 (12.5mm graded stone aggregate) as in floor for tiles complete all as specified and directed.
Material and labour for precast cement concrete block masonry with solid block exceeding 10 cm in width with PCC type C-1 (1:3:6) using 20mm graded stone aggregate and setting in cement mortar 1:6 complete all as specified and directed.
Material and labour for precast cement concrete block masonry with solid block 10 cm thick with PCC type C1 (1:3:6) using 20mm graded stone aggregate with plain or interlocking joints and setting in cement mortar 1:6 complete all as specified and directed.
Material and labour for rendering 15mm thick on fair faces of concrete surface of wall in cement mortar (1:4) finished even and fair without using extra cement all as specified and directed.
Material and labour for rendering 10mm thick on concrete surface of wall in cement mortar (1:4) and finished the surface fair & even without using extra cement, complete all as specified and as directed.
Supply only integral WPC (ISI Mark) complete.
Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of primer all as specified and directed.
Material and labour for preparation for newly plastered surfaces and applying two coats of distemper over a coat of primer complete all as specified and directed.
Material and labour for second class hard wood plain, solid, straight chowkat and frame, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified and directed.
Supply and fix 30mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Supply and fix 35 mm thick second class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed.
Supply and fix 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted without and mitred beads for securing glass or gauge etc all as specified in SSR Pt 1sec-8.24(a) and as directed.
Supply and fix 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted without and mitred beads for securing glass or gauge etc all as specified in SSR Pt 1sec-8.24(b) and as directed.
Material and labour for preparation of new or previously untreated surfaces of wood and wood based material of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.
Material and labour for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.
Supply and fix stainless steel wire cloth, 0.36 mm nominal dia of wire and average width aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rail. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
Supply and fix solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforcement with M.S square tube, supplying & fixing in opening as per specification and directed.
Supply and fix butt hinge, medium weight, cold rolled mild steel, size of hinge 100mm complete all as specified and directed.
Supply and fix butt hinge, medium weight, cold rolled mild steel, size of hinges 75mm complete all as specified and directed.
Supply and fix extruded aluminium, anodised, bow handle of size 150mm complete all as specified and directed.
Supply and fix extruded aluminium, anodised, bow handle of size 100mm complete all as specified and directed.
Supply and fix aluminium anodised barrel tower bolt and fixed of 200 mm length complete all as specified and directed
Supply and fix aluminium anodised barrel tower bolt and fixed of 100 mm length complete all as specified and directed.
Supply and fix aluminium alloy, anodised sliding door bolts(300mm long) with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
Supply and fix in repair vitreous china wash down water closet pedestal pattern EWC, white, including trap set, seat cover and connection to trap, flushing pipe, etc. complete including making good to floor fixing bolt all as specified and directed.
Supply and fix in repair plastic water closet seat cover, black/white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devices, complete all as specified and directed.
Supply and fix in repair vitreous china squatting pan, 'Orissa' pattern, size 580 X 440 mm white, with integral foot rests including provision of lime concrete bedding, fixing of flushing cistern all as specified and directed.
Supply and fix in repair PVC valveless, symphonic action type flushing cistern, low level, white, 10 Ltr capacity with inlet, ball valve, float and handle including brackets all as specified and directed.
Supply and fix in repair vitreous china WHB, white, flat back, size 550 x 400 mm including brackets, 32 mm waste coupling and 32 mm waste fittings all as specified and directed.
Taking up or down steel tubing and connections for 15 mm bore of pipes complete all as specified and directed.
Taking up or down steel tubing and connections for 20 mm bore of pipes complete all as specified and directed.
Supply and fix GI steel tubing medium grade 15mm bore with all fitting and fixed complete to wall and ceiling or laid under in floor complete all as specified and directed.
Supply and fix GI tubes, medium grade galvanised, 20mm bore with all fitting and fixed complete to wall and ceilings or laid in floor complete all as specified and directed.
Refixing old steel tubing and connections in new or old position to walls and ceilings or laid in floors, 15mm bore.
Refixing old steel tubing and connections in new or old position to walls and ceilings or laid in floors, 20mm bore.
Supply and fix in repair sinks made of stainless steel Imm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever barackets and connecting union to pipe overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed.
Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes incl bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915x460 mm bowl size 410mmx360mmx160 mm complete all as specified and directed.
Supply and fix in repair pillar taps cast copper alloy with capstan heads, chromium plated, fancy type, 15mm bore complete all as specified and directed.
Supply and fix in repair Bip tap, chromium plated, 15mm fancy type complete all as specified and directed.
Supply and fix in repair Concealed stop cock, fancy type, chromium plated, 15 mm bore complete all as specified and directed.
Supply and fix in repair Angular stop cock, fancy type, chromium plated, 15 mm bore complete all as specified and directed.
Supply and fix PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.
Supply and fix in repair 15mm bore brass CP WHB mixer for mixing hot and cold water screwed for iron pipe and fixed complete all as specified and directed.
Supply and fix in repair Tubular Towel rod, D type 60cm long brass Chromium plated all as specified and as directed
Supply and fix in stainless steel kitchen plate rack of size 31" X 30" X 10" made out of stainless steel sheet of 1.00 mm with all accessories including taking down old unserviceable rack complete all as specified and directed.
Supply and fix in replacement of rotational moulded polyepolyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 Ltrs incl taking down old unservicable tank of any capacity all as specified and directed.
Supply and fix in replacement of rotational moulded polyepolyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs including taking down old unserviceable tank of any capacity all as specified and directed.
Disconnecting existing tank, setting aside for cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipes etc and hoisting if required reconnecting and refixing in position of exceeding 500 ltrs & not exceeding 1000 ltrs complete all as specified and directed.
Disconnecting existing tanks, setting aside for cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc and hoisting if required reconnecting and refixing in position of exceeding 250 ltrs & not exceeding 500 Itrs complete all as specified and directed.
Supply and fix in repair float valve of size 20mm, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe all as specified and directed.
Supply and fix in repair tank nipple suitable for HDPE water tank of size 15mm dia bore complete all as specified and directed.
Supply and fix in repair tank nipple suitable for HDPE water tank of size 20mm dia bore complete all as specified and directed.
Supply and fix in repair Gun metal gate valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for following bore of pipe including taking down old existing unserviceable gate valve of 20 mm bore complete all as specified and directed.
Supply and fix PVC (SWR) bend, any radius, 110 mm bore complete all as specified and directed.
Supply and fix PVC (SWR) Pipe single socketed in any length with rubber ring joints, 110 mm bore fixed to walls complete all as specified and directed.
Material and labour for aluminium anodized frame Powder Coated (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including jointing clean for fixing etc complete all as specified and directed.
Supply and fix anodised aluminium window and ventilator shutters, Powder Coated (minimum thickness of powder coating 50 micron) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
Supply and fix anodised door shutters, Powder Coated (minimum thickness of powder coating 50 micron) aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.
Supply and fix anodised aluminium window and ventilator shutters, Powder Coated (minimum thickness of powder coating 50 micron) fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing. anodised aluminium snap beading, screws etc. complete all as specified complete as specified and directed.
Supply and fix Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading complete all as specified and directed.
Material and labour for 12mm thick prelaminated particle board, interior grade prelaminated both side with decorative choice laminations, fixed with screw etc complete all as specified and directed.
Supply and fix in repair aluminium extruded section door closer hydraulially regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm width and of weight of between 61 to 80 kg and fixed all as specified and directed.
Supply and fix in repair brass mortice lock; vertical type size 100mm 2 levers all as specified and directed.
Supply and fix in repair brass mortice lock; vertical type size 100mm 4 levers all as specified and directed.
Material and labour for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of midl steel heavy duty and fixed, fixed in repair, complete all as specified and directed.
Supply and fix in repair CP over head shower dia 100mm round shape single flow (ABS body chrome plated with gray face plate) with rubit cleaning system Cat part No: OHS-1989with CP shower arm dia 20 mm & 450 mm long round shape without bend for wall mounted showers with flange complete all as specified and directed.
Supply and fix in repair CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhead shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & ober head shower) complete all as specified and directed
Supply and fix in repair 15 mm bore CP health Faucet cock with Flexible pipe 1 m long complete all as specified and directed.
Supply and fix Soap dish holder complete all as specified and directed.
Supply and fix in repair Toilet roll holder with stainless steel complete all as specified and directed.
Supply and fix in repair Towel ring sqare shape stainless steel complete all as specified and directed
Supply and fix in repair corner glass shelf with bracket complete all as specified and directed
Supply and fix in repair Vitreous China EWC including seat cover closed pattern single piece size 755x365x655cm complete all as specified and directed.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .