REPAIRS TO ROOF, PPGL SHEETS, ROOF TREATMENT,FLOORING AND MISC B/R AND E/M RELATED WORKS IN AOP AREA INCLUDING HANGERS OF ARMY AVN SQN UNDER GE NASIK ROAD.

Amount

Demolition of concrete in ground floors and pavings n exc 15cm thickness (below or above ground level).

M&L for 100 mm thick sub-base with cement concrete type D-2, 1:4:8 (40mm graded aggregate).curing as per standard eng practices. Note:mixing of concrete by machine only.

M&L for 100 mm thick concrete flooring with cement concrete type B-2, 1:2:4 (40mm graded aggregate) over and including provision of pvc diviging strip for joints.complete all as per SSR Part-I.curing as per standard eng practices. Note:mixing of concrete by machine only.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;over and including provision of PCC 1:2:4 type B0 as in filleting/edging to the sides of paver path/hardstanding in size and shape as directed by engr-in-charge.

M&L for Chequered cement concrete tiles with grey cement and pigment 30cm x 30cm x 25mm thick, with rubber moulded glossy finished surface, laid in floors over and including 15mm thick cement mortar screed bed in cement mortar 1:6, set jointed and pointed in neat cement slurry in floors.over and including provision of PCC 1:2:4 as in filleting/edging to the sides of paver path/hardstanding as per standard engineering practice to the entire satisfaction of engr-in-charge.

M&L for Rough Shahabad stone 25 mm to 30 mm thick in flooring/plinth set and jointed in in neat cement slurry and pointed in CM 1:4 complete all as specified and directed over and including 15mm thick screed bed in cement mortar 1:6.over and including provision of PCC 1:2:4 as in filleting/edging to the sides as per standard engineering practice to the entire satisfaction of engr-in-charge.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar.

M&L for 18 to 20mm thick Granite of any type work (table rubbed and polished) in steps, jambs pillars, window cills cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture re of pigment to match with shade of granite 18 to 20mm thick all as specified and directed.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Dismantling of precast concrete articles and precast concrete block set or built in cement mortar.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 inlcluding raking out joints on both faces of wall and curing as per standard eng practices.curing as per standard eng practices.

Taking down completely cement or cement lime plaster, any description on brick or stone walls/ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc. Note: work to be executed at any height and situation.

M&L for Rendering 15 mm thick in cement mortar 1:4 on brick wall/concrete surfaces finished fair and even and curing as per standard engineering practice. Note: work to be executed at any height and situation. only sccaffolding or ladder to work for multistorey bldg.

M&L for 5 mm thick plaster in CM 1:3 as in ceiling complete all as specified and as directed by engr-in-charge.

M&L for rendering 10mm thick in CM 1:6 on brick wall/concrete surfaces finished fair and even and curing as per standard eng practice.

M&L for two coats of exterior emulsion paint on wall/ceiling surface including preparation of surfaces to the entire satisfaction of ground executives. Note:work to be executed at any height and situation. only sccaffolding or ladder to work for multistorey bldg.

M&L for two coats of cement base paint on brick wall/ceiling surfaces over two coats of primer including preparation of surfaces and curing as per standard eng practices. Note:work is to be executed at any height and situation.For multistorey bldgs only sccaffolding/ladder shall be used. work to be executed at any height.

M&L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats including preparation of surfaces of wall/ceiling.

M&L for applying two coats of interior primer over wall /ceiling surfaces as per manufacutrers instruction incl preparation of surfaces to the entire satisfaction of ground executives.

M&L for applying one coats of interior primer over wall /ceiling surfaces as per manufacutrers instruction incl preparation of surfaces to the entire satisfaction of ground executives.

M&L for applying two coats of exterior primer on wall/ceiling surfaces as per manufacuters instruction including preparation of surfaces to the entire satisfaction of ground executives. Note:For multistorey bldgs only sccaffolding/ladder shall be used. work to be executed at any height.

M&L for Providing, cement concrete type B1 1:2:4 (20 mm graded aggregate) in copings and the like including weathering, slightly rounded or chamfered angles and throating, as directed and finnshing the surfaces of concrete and curing as per standard eng practces.

Demolition of concrete in any description and in any position.

M&L for Providing cement concrete type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete over and including preparation of surfaces.curing as per standard eng practices.

M&L for Preparation of new or previously untreated steel or iron surfaces over 10 cm width or girth not otherwise described and two coats of synthetic enamel paint over a coat of al red oxide primer. Note:work is to be executed at any height and situation.

Dismantling wrought iron or mild any description such as steel gate, steel frame works, purlins, rafter, railings, balusters and window guard bars and directed by Engr-in-Charge. Note:work is to be executed at any height and situation.

S& F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 Grade St-240 complete all as specified and as directed. Note:work is to be executed at any height and situation.

Dismantling Plain or corrugated steel sheeting of any gauge,thickness,including Nainital or similar pattern roof coverings complete all as specified and as directed.

S&F Prepainted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/cladding to wall,fixed with self tapping screw complete all as specified and as directed. Gap between wall face and sheet if any shall be sealed using CM 1:3 with WPC.quoted rate deemed to be inclusive of the same. Note:Note: work is to be executed at any height and situation.

S&F Prepainted Galvalume aluminium zinc coating GI based Plain sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/cladding to wall,fixed with self tapping screw complete all as specified and as directed. Note: work is to be executed at any height and situation.

M&L for Repairing of broken edges of RCC chajjas, roof projections, fins, facia and similar works by dismantling of loose and damaged/ disintegrated portion of edges (cross sectional area not exceeding 150 sqcm) with cement mortar 1:4 or cement concrete 1:1½:3 type A0 and chicken wire mesh with nails (to hold fresh mortar/concrete) including necessary formwork etc. and scaffolding for work upto four storied buildings and finishing the surface by paint to the entire satisfaction of engr-in-charge and match the surface with existing work. Note: work to be executed for multistorey bldgs only. only sccaffolding and ladder shall be used.

Taking down carefully existing bituminous membrane/tarfelt treatment any description and cleaning and making good damaged surface of roof ,parapet,facia etc in cement mortar 1:3/PCC 1:2:4 as directed by engr-in-charge where ever require.quotated rate shall be deemed to be inclusive of complete removal of swollen plaster and concrete wherever directed by engr-in-charge and removing rubbish out of defence land. Note: work is to be executed at any height and situation.

Demolition of concrete (unreinforced) of any description and in any position not otherwise secifically provided for.

Providing cement concrete type B0 1:2:4(12.5mm graded aggregate) in roof kerbs or mud stops,ridge, rounded or chamfered on edges.

M&L for rendering 15 mm thick(minimum) in CM 1:4 with intergral waterproofing compound (200 ml per bag of cement used) on roof surfaces,parapets,facias etc .curing as per standard eng practices. Note: waterproofing compound shall be measured and paid separately.

Supplying only integral water proofing compound ISI marked complete all as specified and as directed.

M&L for Applying evenly a coat of hot blown bitumen 85/25 over roof surface,facia,parapet etc at the rate of 1.2 kg per sqm for fixing app membrane etc including cleaning surfaces.make same as for APP membrane.

M&L for Waterproofing on roof including flashing and junctions of parapet,kerb, wall etc.as under :- (a) Laying a layer of APP based polymeric membrane,3 mm thick(minimum),weighing not less than 3.60 kg/Sqm prefabricated fire layer waterproofing membrane reinforced with polyester non woven fabric(weighing not less than 160 gms/sqm) shall be applied over compatible primer at 0.40 litre/Sqm of density at 25 degree Centigrade 0.87-0.89 Kg /Litre and viscosity 70-160cps or cold sticker, application of APP modified membrance shall be by torch application. The overlaps shall be minimum 150mm on the transverse direction and 100 mm on the longitudinal direction. (b) APP membrance,Primer and bitumastic aluminium paint and bitumen shall be of same brand. (c) For vertical surfaces i.e. parapets,wall etc. app membrane shall be tucked into groove and sealed with silicon sealant i.e. "Dowsil 789 weatherproofing silicon sealant" using gun. (d) Bitumen and aluminium paint shall be paid separately.

M&L for applying two coats of solar reflective bitumastic aluminium paint at the rate 0.15kg/sqm per two coats over exposed app membrane surfaces(old/new) including preparation of surfaces to the entire satisfaction of ground executives. Note: Make same as for app membrane.

Disconnecting existing tanks exc 250 n exc 500, setting aside (or lowering if required) cleaning and removing all scale dirt,etc from the mouth of circulating pipes etc and hoisting if required,reconnecting and re-fixing in position. Note: work is to be executed at any height and situation.

Disconnecting existing tanks exc 500 n exc 1000, setting aside (or lowering if required) cleaning and removing all scale dirt,etc from the mouth of circulating pipes etc and hoisting if required,reconnecting and re-fixing in position. Note: work is to be executed at any height and situation.

Taking down AC rain water pipes(any size or pattern) including all fittings,head shoes,bends,swan neck etc. Note: work is to be executed at any height and situation.

S&F PVC (SWR) pipes110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls including fixing clamp etc. Note: work is to be executed at any height and situation.

Dismantaling wall & ceiling boards (Fibre, pulp, insualtion etc.) or insulation boards , slabs / blankets of any thickness including cover fillets

S&F wall panelling Vinyl finish,Bevel edge of size 1200 x 1200 x 25 mm thick with glass fiber core,in rectangular grid of size 1200mm(H) x 1200mm(W) fixed on wall using galvanised steel 'Strul Z-Bar' or 'Impale clip' fixed to the wall in grid pattern all as per manufacturer instruction. NRC is upto 1.0 and fire class 'A'. Note:Contractor quotated rate shall be deemed to be inclusive of all minor items of exectution to complete the work as per manufacturer instructions.No price adjustment shall be done during execution if any item of work is specifically required to complete the work even if it is not mentioned in the description of Item above.

S&F False Ceiling ceiling panel of size 1195 x 595 x 20 mm thick, texture finish concealed edge with glass fibre core fixed to T-grid ceiling frame work using galvanised steel 'Skelet Trelis' T 24 concell' system consisting of main tee MT 24 W 36 at 600 c/c and cross tee CT 24 W 12 at 1200 c/c,wall angle WA 24 W 30 around wall and spacer bar WA 24 W 30 at 600 c/c all as per manufacturer's instructions. Thickness of main/cross tee will be 0.3mm and that of wall angle/spacer 0.4mm. NRC is upto 0.90 and Fire class is I & P. Note:Contractor quotated rate shall be deemed to be inclusive of all minor items of exectution to complete the work as per manufacturer instructions.No price adjustment shall be done during execution if any item of work is specifically required to complete the work even if it is not mentioned in the description of Item above. Note:Contractor quotated rate shall be deemed to be inclusive of all minor items of exectution to complete the work as per manufacturer instructions.No price adjustment shall be done during execution if any item of work is specifically required to complete the work even if it is not mentioned in the description of Item above.

S&F for PVC water storage tank(capacity 500 L -2000L) cover (Lid) lock type. PVC tank cover shall be of make as approved by GE and shall be fitted to the entire satisfaction of engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debris out of MOD land and rubbish off the premises. Note:work to be executed at any height and situation.

M&L for 8-10 mm thick double charged vitrified tile as in flooring,laid in any shape/pattern over and including 15 mm thick screed in CM 1:6 as in floors. Note: size,shade of tile shall be as approved by GE based on manufacturing company catalogue. contractor quotated rate deems to be inclusive of tile of max size i.e. 60 cm x 60cm. Note:work to be executed at any height and situation.

M&L for 8-10 mm thick double charged vitrified tile as in skirting,laid in any shape/pattern over and including 10 mm thick backing coat in CM 1:4. Note: skirting shall be of same size and same make as for flooring. Note:work to be executed at any height and situation.

Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DB removing materials to store and making good to disturb surfaces of wall/floors etc as specified & directed.

M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for One light point / fan point controlled by one, one way swtich. Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

All as per ser item No. 54.00 here in before but One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per ser item No. 54.00 here in before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes.

All as per ser item No. 54.00 here in before but on independent board.

All as per ser item No. 54.00 here in before but one light point controlled by 2 way switches.

All as per ser item No. 54.00 here in before but one bell/buzzer point controlled by one push button on the same board with other switches or independent.

M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC casin and caping (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for One light point and one fan point controlled by one, one way swtich. Note:- Unit rate include for cutting chases for sinking for boxes and making good to wall ,floors etc.

All as per ser item No. 60.00 here in before but One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per ser item No. 60.00 here in before but on independent board.

All as per ser item No. 60.00 here in before but one light point controlled by 2 way switches.

All as per ser item No. 60.00 here in before butone bell/buzzer point controlled by one push button on the same board with other switches or independent.

All as per ser item No. 60.00 here in before but with 2.5 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including Fibre insulation boards, treated on one face only of adequate size for mounting purposes.

Supply and fixing in replacement of switch piano flush button 5 Amp single pole one way 230 volts white finish all as specified & directed.

Supply and fixing in replacement of socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.

Supply and fixing in replacement of switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.

Supply and fixing in replacement of switch socket combination multipurpose flush type 2 in 1 type (3 and 3 pin) 5/15 Amps, 230V, AC.

Supply and fix in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with inverter LED bulb 9 watt complete all as specified and directed

Supply and fix in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish.

Supply and fixing in replacement of bell push, flush type, 5 Amp single pole, 230 volts white finish all as specified & directed.

Supply and fixing in replacement of switch piano flush button 5 Amp single pole 2 way 230 volts white finish all as specified & directed.

M&L in replacement and connecting up fan regulator electronic on existing phenolic laminated sheet dimmer type 230 volts, 450 watts suitable for ceiling fan 1200/1400mm sweep.

S&F in replacement of LED 20W Batten with Motion Sensor (4 feet) Main Housing: PC, Front Cover: PC diffuser, LED: LM80 certified LED, Lumen Maintenance: 50000 hours @ L70, LED Driver: Constant current LED Driver, Internal Wiring: Insulated Cu wire, Hardwares: SS & MS Zinc plated and passivated, Ingress Protection: IP20, Operating Voltage Range: 140V~ 270V, Operating Temperature: -10ᵒC~ 50ᵒC, mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing in replacement of 30 Watt inverter LED street light fitting luminaire, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08. , including coneecting up with 2/3 core flexible coppper conductor cable , compete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of inverter LED luminaire 600 x 600mm, 36 watt, 220 volts AC recessed/ surface type fittings, epoxy powder coated CRCA sheet housing with electronic driver, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply and fix in replacement MCB TP 40 Amp, 415 Volts, 50 Hz with 10 KA.

Supply and Fixing in replacement of MCB DP/SPN 6-32 Amps, 230 Volts, 50 Hz with 10 KA .

Supply and Fixing in replacement of MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA.

Supply and fixing in replacement sheet metal enclosure (factory made), TPN Vertical Distribution Boards (MCCB Incomer) IP43 protection Double Door : Plain 4 way with 200 Amps rated busbar all as specified and directed.

Supply and fixing in replacement of buzzer, AC, 230 volts, single phase complete all as specified and directed.

Supply and fixing in replacement of bell, AC, 230 volts, single phase complete all as specified and directed.

Supply and fixing in replacement of bell multi music type AC, 230 volts, single phase complete all as specified and directed.

Supply and fixing in replacement of sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified.

M&L for preparation of surface of MS/Meter box all including inside and outside surface by scrapping applying two coats of Gray paint by Spray painting complete all as specified and directed by Engr in Charge.

Supply and fixing in replacement of submain wirng with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 10 Sqmm drawn through in and including PVC heavy duty surface casing caping including 10 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.

Supply and fixing in replacement of submain wirng with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including PVC heavy duty surface casing caping including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.

Supply and fixing in replacement of submain wirng with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 4 Sqmm drawn through in and including PVC heavy duty surface casing caping including 4 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.

Supply and fixing in replacement of submain wirng with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 2.5 Sqmm drawn through in and including PVC heavy duty surface casing caping including 2.5 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note : for Srl item No 78.00 to 81.00 herein before :- (i) Two runs of cables and one run of continuous earting cable drawn in casing and caping will be measured as one length of sub main. (ii) PVC casing caping and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc.

M&L for MS box of size 130x120x30 cm depth, dust proof with front opening hinged door both side, made out of 2mm thick MS sheet cubical type with powder coated painting for mounting of MCCB, DB's, electric meter etc inside the box fixed in wall by necessary cutting of wall of suitable size in concealled and making good the surface, by applying cement work, brick work and matching colour (Oil bond distemper) etc including dismantling of MS box with MCCB DB's and electric meters and refixing the same MCCB, DB's and electric meters in new box carefully including necessary electric connection by suitable size of copper conductor cable of suitable length and testing completed all as directed by Engr-in-Charge. Note : (a) Any plastering work involved while taking out old UNSV meter box and refixing the new meter box is deem to be included in this rate. (b) PVC flexible conduit required within the meter boxes is deemed to be included in this item rates.

Supply and fixing in replacement sheet metal enclosure (factory made), TPN Vertical Distribution Boards (MCCB Incomer) IP43 protection Double Door : Plain 8 way with 200 Amps rated busbar all as specified and directed.

Supply and fix in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 415 volts, 200 Amp rated bus bar with front openable cover suitable for TP & N 4 ways all as specified & directed.

Supply and fix in replacement distribution board sheet metal enlosure factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 2 ways all as specified & directed.

Supply and fix in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 4 ways all as specified & directed.

Supply and fix in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed.

Supply and fix in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 12 ways all as specified & directed.

Supply and fixing in replacement 4 Pole MCCB 125 Amp, 50 Hz, 415 V, with adjustable thermal & adjustable magnetic setting, breaking capacity 25 KA.

Supply and fix in replacement MCCB 63 Amp TP, 415 volts 16KA.

Supply and fix in replacement MCB FP 63 Amp, 415 Volts, 50 Hz with 10 KA .

M&L for replacement of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.

NOTE: - AMOUNT OF SCHEDULE OF CREDIT RS. 95,807.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

M/S SAMEER SUBHASH PATANI

Bidder Name

M/S SAMEER SUBHASH PATANI

Alpha Construction