REPAIRS TO FLOORING, SANITARY FITTING, FOOTPATH, CUPBOARDS AND MISC ITEMS AT JCOs MD ACCN AND MES QTR AT WING-V AT ARTY CENTRE UNDER GE NASIK ROAD CAMP.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises complete all as specifed and directed

Dismantaling of stone slabs of any descripation or thickness in floors, aprons etc laid bedded & pointed in any mortar complete all as specifed and directed

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness(Below or above ground level) un-reinforced complete all as specified and directed.

M&L for screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed

S&F Hand cut cudappa stone slab 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete Note: screed bed layer measured seperately complete all as specifed and directed

M&L for granite (of any type)work (table rubbed and polished)20 mm thick in steps,jambs,pillars,cooking platforms and like in cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite

Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar work

M&L rough dressed shahabad stone slab 20 to 25 mm thick laid beded and jointed and pointed in CM (1:3) in floors complete all as specifed and directed Note : Cement mortar screed bed layer shall be measured & paid separately

M&Lfor vitrified ceramic tiles (any shade (light/dark) 10mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors, skirting etc set & jointed in neat cement slurry and painted in white or coloured cement to match.

M&L for coloured non skid ceramic tiles 7mm to 8mm thick area of each tile exc 0.06 sqm but not exceeding 0.11 sqm thick set and jointed in neat cement slurry nd pointed in coloured cement to match in floor etc complete all as specifed and directed Note : Cement mortar screed bed layer shall be measured & paid separately

M&L for non Skid ceramic tiles 7 to 8mm thick joint free coloured tiles area of each tile exc 0.18 sqm but not exc 0.36sqm in floors set and jointed in neat cement slurry complete all as specifed and directed

M&L for rendering 15mm thick in CM 1:4 as in backing coat plaster on surfaces of stone masonary surfaces complete all as specifed and directed

M&L for glazed ceramic tiles coloured size 300 x 200 x 7mm thick as on vertical surfaces, of walls as in skirting, dado etc set and jointed in neat cement slurry & pointed with coloured cement to match complete all as specified and directed

Taking up or down 25mm dia tubes galvanized iron and connections and removing/shifting from site incl cleaning for refixing where directed complete all as specifed and directed

All as per item No 14 above but 20 mm dia

All as per item No 14 above but 15 mm dia

Re-fixing only 25mm dia tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed of size complete all as specified and directed

All as per item No 18 above but 20 mm dia

All as per item No 18 above but 15 mm dia

S&F 25mm dia tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed :-

All as per item No 20 above but 20 mm dia

All as per item No 20 above but 15 mm dia

S&F in repair stainless steel sink made of stainless steel 1mm thick with out drainage board including plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing contilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size410mmx330mmx160mm complete all as specifed and directed

S&F in repair cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) B-1 dia of outlet 75mm complete all as specifed and directed

S&F in repairs bib taps standared of PTMT 15mm bore dia any colour high presure screwed for iron pipe of Make Prayag fixed and repairs (minimum weight 90 gms) complete all as specified and directed

S&F in repair brass chromium plated fancy type shower rose with swivel joint incl fixing to steel pipes or union all as specified and directed fixed in repairs complete all as specifed and directed

S&F in repair grating doom PTMT of 100mm dia complete all as specifed and directed

Taking down 100/75 mm dia PVC/CI soil, waste and vent pipes, in any length with or without ears etc in any position

S&F 110mm dia PVC (SWR) pipe single socketed 110mm bore any length with rubber ring joints fixed to wall complete all as specified & directed bore of pipe in mm complete all as specifed and directed

All as per item No 29 above but 75mm

S&F 75mm dia PVC(SWR) bends of any radius

All as per item No 31 above but 110 mm dia

S&F 75mm dia PVC(SWR) branch piece,single(single Y) equal or unequal

All as per item No 33 above but 110 mm dia

S&F 75mm dia PVC(SWR) junction single,(single T),equal or unequal

All as per item No 35 above but 110 mm dia

S&F 75 mm dia PVC(SWR) branch piece,Double (Double Y) equal or unequal

All as per item No 37 above but 110 mm dia

S&F of PVC(SWR) vent cowl of 110 mm bore

S & F Vitreous China wash down water closet pan (pedestal pattern), white (excludingfixing bolts, flushing cisternand flush pipe) fixing in repair complete all as specified and directed

S&F in repairs hand spray (Health faucet) 1 mtr PVC tube 15 mm bore with wall hook (CP) make : Jaguar or equal make fixed in repairs

S&F in repairs Vitreous china squatting pan ,'Orissa' pattern, size 580x440 mm white,with integral foot rests (excluding flushing cistern and flush pipe)

S&F in repairs PVC(SWR) 'P' trap of 125/110 mm bore

S&F in repairs PVC valveless,symphonic action type,flushing cistern ,low level white,with inlet,ball valve,float and handle including brackets of 10 ltrs

S&F in repairs PVC connections 15mm size with PTMT nuts of length 300mm.

S&F in repair stop valve, 15mm bore dia PTMT of any colour high pressure screwed for iron pipe and fixed (Minimum weight 90 gms) complete all as specified and directed

S&F of vitreous china wash basin,white,flat back,size 450x300mm excluding taps,waste,chain and plug and porcelin stopper but including brackets

S&F in repairs waste fittings incl waste pipe,brass,chromium plated of 32 mm dia for wash basins

S&F in repairs pillar taps of 15 mm bore chromium plated screwed down high pressure with long screwed shanks and fly nuts

S&F in repairs Low density polyethylene pipes of Bore 32 mm of pressure rating 6 kgf/cm2 fixed complete to walls ,ceilings or in floors

Taking down chowkat or frames with shutters (without taking off shutters from the frame not exc. 1.5 Sqm each &removing from site

All as per item No. 51 above but exc. 1.5 Sqm and n.exc. 4.00 Sqm each.

Taking down shutters of window any description n.exc. 1.00 Sqm each removal from site by contractor at his own expense complete all as specified & directed.

All as per item No.53 above but door shutter exc. 1.00 Sqm and n.exc. 2.00 Sqm each

S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, sup-plied and fixed to walls complete all as specified and directed.

S&F (IInd class hard wood) factory made Glazed and ske- leton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (divided in to square with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mi-tred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Sec-tion 8, cla-use 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

All all as above item No 56 but thickness of shutter 30mm complete as specified in SSR Part-I Section8, clause 8.24 (b) all as specified and directed.

S&F IInd class HW factory made 35mm thick plain framed panelled shutters (two panel) with lock rail, panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Part I) Kiln, Seasoned and chemically pressure treated complete all as specified and directed.

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F 100 mm Butt hinges,medium weight cold rolled mild steel all as specified & directed.

S&F MS barrel tower bolts stove enameled black with bright bolt – 150mm long fixed complete all as specified and directed.

S&F MS pressed handles oval type stove enameled black fixed – 125mm size complete all as specified and directed.

S&F MS sliding door bolt plate type, stove enameled black with bright bolt not less than 12mm dia with and incl. a minimum of 6 bolts and nuts,four on bolt plate and 2 on staple plate – 300 mm long complete all as specified and directed.

S&F mild steel steel butt hinges 75mm size medium weight complete all as specified and directed

S&F 100mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt complete including fixing in repair all as specified and directed.

S&F 100mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring of 140mm size fixed in floor complete all as specified and directed.

S & F Solid PVC frame of size 50mm x 95mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, with necessary arragement for fixing of glass for louvers type window/ventilator and additional PVC beading around the frame for fixing of wiremesh, S & F in opening all as specified and directed by Engr-in-Charge

Taking down PVC chowkat or frames with shutters (without taking off shutters from the frame) not exc. 2.0 Sqm each. Complete including removing from site by each contractor at his own expense all as specified & directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube S&F in opening as per specification and drawing

S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

S&F 100mm stainless steel butt hinges medium weight all as specified and directed

S&F aluminium alloy barrel tower bolt 150 mm long

S&F 150 mm aluminium alloy handels cast/plate type

S&F Aluminium alloy, anodised, sliding door bolt 250 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F Sheet glassordinary quility 3 mm thick nexc 0.5sqm each pane complete all as specifed and directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm complete all as specifed and directed

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings.

Dismantling wrought iron or mild steel work of any description not otherwise provided for including gas cutting, welding etc.

Supply and fixing steel work in tubular or rectangular hollow section in rafters, purlins etc. and connected works complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M & L for Preparation of new or previously untreated steel or iron surfaces of any description over 10cm width or girth and two coats of synthetic enamel paint over a coat of red oxide primer.

Dismantling wall and ceiling boards( Fibre, pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified & directed.

S&F interlocking aluminium power coated snap grid consists of main Tee runners of size 38mm x 25mm x 1.00 mm spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x1.00mm, 1200 long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Te 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked of the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 1.5mm . Aluminium alloy extruded section shall be aluminium anodized ( minimum 15 micron) and shall conform to IS 733, IS 1285 and IS 737, and providing and fixing with Hangers of 4mm dia GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long size of grid 600 x 600mm complete all as specified and S&F non asbestos cement building board 4mm thick of make E board classic of M/s Everest industries Ltd or equivalent make as approved, “in ceiling fixed with screw as per manufacturer instruction”

Dismantling wooden boarding, any description fixed in any position with nails.

S&F 18/19 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work as in cub bord shutter shelves, kitchen Cup board shutter / cabinets, showcase book, shelves etc including teak wood lipping patty, 6 mm thick fixed with nails in repairs completee all as specified and directed

S&F Hasp & staple aluminium anodised safty type of 100mm length

M&L for Hard core of gauge n.exc 63mm deposited spread levelled in layers n.exc 15cm thick watered and rammed to a true surface using broken stones boulder complete all as specified and directed.

M&L for cement concrete type E-2 1:5:10 (40 mm graded aggregate) under floors

M&L for M-30 precast coloured cement concrete interlocking paving tiles 60mm thick rubber moulded as in pavement laid on including 30mm thick stone dust cushion laid dry to the profile all as per manufactuerers insturctions complete all as specified and directed by the Engineer-in-Charge

Taking down carefully existing bitumen tarfelt incl. Screed and cleaning of surfaces of roof etc. With wire brush incl. Flashing and junctions of parapets/kerb walls etc. And removing of the rubbish to a distance exc. 500 metres but not exc. 1.5 km and deposting where directed.

M&L for rendering 15mm thick in cement mortar (1:4) or fair faces of concrete surfaces smooth finished (without using extra cement).

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.

Dismantaling water tanks and removing to store exc 500 but n. exc 1000 ltrs

Disconnecting existing tanks, exc 500 & n exc 1000 setting aside (or lowering if required), cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position.

S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position all as specified and directedin SSR Pt I

S & F ball valves, 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms).

Fixing only in repair ball valves any bore or size.

S&F Gun-metal, globe or gate valves, 20 mm bore with iron wheel head, screwed both ends for iron pipe and fixed

Fixing only gate valves 15-20 mm bore dia of pipe.

Demolition of concrete (unreinforced) of any description and in any position not otherwise specifically provided for.

Providing, cement concrete type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges.

Waterproofing on roof including flashing and junction of parapet, kerb, wall etc. As under (a) Applying bituminous primer on cleaned and dried surface @ 0.2 kg/sqm. (b) A coat of hot blown type bitumen of grade 85/25, applied hot @ 1.25 kg/sqm (c) Laying by thermo fusion ( torch applied) 3 mm thick APP based polymeric water proofing membrane weighing not less than 3.5kg/sqm and reinforcement with polyester non woven fabric ( not less than 150 gms/sqm) (d) Painting the exposed APP membrane surface with bituminous paint @ 0.15kg/sqm

NOTE :- AMOUNT OF SCHEDULE OF CREDIT RS. 40,875.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

UNITED ENTERPRISES

SHILPVED

M/S K. K. Construction

M/s. SHRI SAINATH ENTERPRISES

Alpha Construction

Vinod Enterprises

Vishal Constructions

Bidder Name

Vishal Constructions

M/S K. K. Construction

Alpha Construction

UNITED ENTERPRISES

M/S MK Nair

Vinod Enterprises

SHILPVED

M/s. SHRI SAINATH ENTERPRISES