REPAIRS AND DAY TO DAY MAINTENANCE TILES, NAHANI TRAPS, SUNKEN FLOOR, MASONRY, PLASTERING, CRACK FILLINGS, SWR PIPES AND OTHER MISC B/R WORKS OF OTM/MD ACCN BLDGS AT MH/MD AREA OF AGE B/R-II UNDER GE GOLCONDA

Taking down cement or cement lime plaster on brick wall / stone walls/concrete surfaces, ceilings etc. including ranking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for Rendering, 15mm thick , in CM (1:4) mixed with water proofing compound as per manufacturer instruction on fair surfaces of brick or concrete walls, finished even and smooth without using extra cement all as specified and as directed. Note: WPC shall be measured and paid separately.

Supply only liquid water proofing compound of approved make complete all as specified and as directed.

M&L for 15mm thick plastering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 5 mm thick plastering in CM 1:3 finished even and smooth w/o using extra cement on brick or concrete surface of ceilings complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali-resistant primer and 1.5 mm thick wall care putty on plastered surfaces complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali-resistant primer and 1.5 mm thick wall care putty on plastered surfaces complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on wall surfaces complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new wall surfaces complete all as specified and as directed.

Complete removal of existing treatment to wall and apply two coats of Oil bound distemper over one coat of alkali-resistant primer and 1.5 mm thick wall care putty including preparation of surface complete all as specified and as directed.