EPAIR TO ROOF SUNKEN FLOORING RUSTED PIPE LINES AC GALVALUME SHEET AND CONNECTED WORKS IN N 4 NARENDRA GROUND AND RAMADEVI AT AFS CHAKERI KANPUR

Amount

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store yard complete all as specified and directed.

Demolition of cement concrte in ground floor and paving not exceeding 15cm thick (below or above ground level) complete all as specified and directed.

M & L for rendering 15 mm thick in CM (1:3) mixed with liquid water proofing compound (@ 200 ml per bag of cement) on fair faces of brick or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.(Note: Liquid water proofing compound shall be measured and paid separately under relevant item of Sch A given here in after).

M & L for two coats of master seal 550 to prevent leakage/ seepage through sunken floor over prepared surfaces, complete all as specified and directed.

M & L for PCC (1:5:10), type E2 using 40mm graded stone aggregate as in filling mass concrete complete all as specified and directed.

M & L for 25 mm thick PCC (1:2:4) type B-0, using 12.5 mm graded stone aggregate as in sub base for floor complete all as specified and directed.

M & L for 7 to 8 mm thick non skid ceramic coloured digital tiles (Square/ rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed in CM (1:6) complete all as specified and directed.

Ditto all as per item No 7.00 here-in-before but using as in skirting/dado but over and including 10 mm thick cement plaster in CM (1:3) complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid/ bedded and pointed in any mortar complete all as specified and directed.

M & L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window cills cooking platforms and like over and including 20 mm thick screed bed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, cutting and moulding edges complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and including cleaning for re-fixing or removal from site complete all as specified and directed.

Ditto all as per item No 11 here-in-before above but for 20 mm bore.

S & F 15 mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed.

Re-fixing of 15 mm bore steel water tubing and connections in new or old positions to wall and ceiling or laid in floors complete all as specified and directed.

S & F steel water tubing medium grade, galvanised with all fittings of 20 mm bore and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Re-fixing of 20 mm bore steel water tubing and connections in new or old positions to wall and ceiling or laid in floors complete all as specified and directed.

Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar in 1:3 ,cutting depth not exc 10 cm girth as directed.

S & F in repairs grating round of size 140 mm dia of PTMT complete all as specified and directed.

S & F PVC waste pipe 32 mm bore for WHB/sink of Make-Prayag Cat No 327 or equivalent in Cera/Essco, all as specified and directed.

S & F in repairs brass chromium plated towel rail of 450 mm long complete all as specified and directed.

S & F in repairs chromium plated soap dish complete all as specified and directed.

S & F in repair 32 mm dia low density polyethylene pipes with bends etc as required (LDPE) of pressure rating 6 kg/sqcm, fixed to wall, ceilings, in floors etc complete all as specified and directed.

S & F in repair 15 mm dia fancy type bib taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 105 gms) complete all as specified and directed.

S & F in repair 15 mm fancy type Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 120 gms) complete all as specified and directed.

S & F in repair 15 mm dia stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 90 gms) complete all as specified and directed.

S & F in repair 15 mm dia angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 90 gms) complete all as specified and directed.

S & F in repair Swivel shower of PTMT any colour for fixing with 15 mm pipe, (Minimum weight 40 grms), complete all as specified and as specified and directed.

S & F in repair Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour, (Minimum weight 40 grms), complete all as specified and directed.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S & F in repairs 15 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe. (Minimum weight 210 gms) complete all as specified and directed.

S & F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required re connecting and refixing in position of exceeding 250 & not exceeding 500 liters capacity complete all as directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exceeding 250 & not exceding 500 liters of capacity complete all as directed. Note :- Date of cleaning shall be written on tanks by using stencil letters with 10 cm high from synthetic enamel paint.

S & F in repairs PVC flushing cistern push button / handle type of 10 ltr capacity , coloured complete with all fitting fixed to with WC including PVC flush pipes ,brackets complete all as specified and directed.

S & F in repair vitreous china wash down water closet pedestal pan white excluding flushing cistern and flush pipes complete all as specified and as directed .

S & F in repair vitreous china squatting pan `Orissa ' pan pattern size 580 mmx440mm white `P' or `S' trap front back inlet ( excluding flushing cistern and flush pipes) complete all as specified and directed.

S & F in repair vitreous china wash hand basin white size 550mmx400 mm including bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified and directed.

M & L for 75 mm dia outlet cast iron floor trap with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed.

S & F 100 mm bore cast iron sanitary connection socket fixed to WC outlet etc complete all as specified and directed.

S & F in repair 75 mm dia cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches as in floors complete all as specified and directed.

Ditto all as per item No 41.00 here-in-before above but for 100 mm bore.

S & F 75 mm bore, cast iron bends of any radius.

S & F 100 mm bore, cast iron bends if any radius.

S & F in repair PVC internal kit for automatic syphonic action type low level flushing cistern of capacity 10 liters complete all as directed.

S & F in repair lid for PVC tank for 500/1000 liter capacity of tank with complete arrangements complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed.

S and F fiber glass reinforced plastic (FRP) door frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom for stability of the frame complete as specified and directed.

S and F 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified and directed.

S & F PVC hinges of 100 mm long complete all as specified and directed.

S & F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed.

S & F 150 mm long aluminum anodised bow handle fabricated type extruded section complete all as specified and directed.

Taking down/removing of existing water proofing treatment on roof surfaces and wall surfaces complete, including screed bed, mud phuska, PCC, etc racking out joints, hacking for key scrubbing down with water etc, and removing rubbish out of MD land complete all as specified and directed.

M & L for screed bed 15 mm thick (average) on concrete surfaces in CM(1:4) mixed with liquied water proofing compound @ 200 ml per Sqm and finishing the surface even and smooth without using extra cement including spreading / brushing neat cement slurry @ 3.00 Kg/ Sqm on old concrete surface all as specified and directed. Note:- Water proofing compound shall be measured and paid separately under relevant items given here-in-after of Sch 'A'.

M & L PCC (1:2:4) type B-0, using 12.5 mm graded stone aggregate (thickness as required at site) for padding concrete as on roof, mixed with water proofing compound @ 200 ml per sqm complete all as specified and directed. (Note:-Water proofing compound shall be measured and paid separately under relevant item of Sch 'A' given here-in-after.).

M & L for water proofing treatment on horizontal or vertical surfaces with provision of oil bound bitumen primer @ 0.50 Kg/ Sqm and providing 3 mm thick, APP modified water proofing membrane weighing not less than 3.50 Kg/Sqm reinforced with non-oven polyester fabric weighing not less than 160 gm /Sqm all as per detailed specifications, sealed with overlaps shall be with torch application and applying two coats of aluminium reflective paints complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and directed.

M & L for repair to chajja area not exceeding 2 sqm each including plaster in CM(1:3) or PCC(1:2:4) type B-0 using 12.5 mm stone aggregate on top including mixing with liquid WPC,benching/haunching,repair to broken plaster with dubbing coat complete all as specified and directed.

M & L for repair to chajja area exceeding 2 Sqm and not exceeding 4 sqm each including dismantling of upward facia,cutting of reinforcement , plaster in CM(1:3) or PCC(1:2:4) type B- 0 using 12.5 mm stone aggregate on top including mixing with liquid WPC as required, benching/haunching, repair to broken plaster with dubbing coat complete all as specified and directed.

M & L for repairing of damaged portion of mouth at terrace / roof surface of rain water pipe by cleaning and repairing to mouth of RWP by using CM (1:3) including with mix with liquid WPC & sealed with 85/25 hot blown grade bitumen complete to make joint of rain water pipe and roof surface fully leak proof complete all as specified and directed

M & L for cleaning of roofs by getting out growing vegetations / grass & brooming down with removing it out of MD land premises of including repairing to damaged surface of roof by using cement plaster in CM (1:3) mixed with liquid WPC @ 200 ml per sqm & sealed with 85/25 hot blown grade bitumen in patch not exceeding 2.0 Sqm each complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheets as in roof coverings complete all as specified and directed.

S & F 1.00 mm thick plain, galvanised mild steel sheeting, in steel gates, ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

M & L for 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc, fixed with L- type or J type hook bolts complete all as specified and directed.

Ditto all as per item No 65.00 here-in-before above but except sheeting.

M & L for 75 mm thick PCC (1:3:6) type C-2, using 20 mm graded stone aggregate as in plinth protection surface finishing even & smooth without using extra cement complete all as specified and directed.

M & L for brick work with fly ash old size bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) including dismantling of old brick work complete all as specified and directed.

Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubing down with water etc., all as directed.

M & L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:4) finished fair and even without using extra cement complete and applying two coats of cement based paint after preparation of surfaces complete all as specified and as directed.

M & L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:6) finished fair and even without using extra cement complete and applying two coat of distemper oil emulsion over a coat of primer over & including 1 mm thick wall care putty after preparation of surfaces complete all as specified and as directed.

M & L for rendering 10 mm thick after dubbing out average 10 mm thick on irregular face of ceiling in CM (1:4) finished even and fair without using extra cement, including chicken wire mesh fixed with nails or screws etc and applying three coats of white wash after preparation complete all as specified and directed.

S & F in repairs PVC (SWR) pipe, 110 mm dia, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Ditto all as per item No 73 here-in-before but for 75 mm dia.

S & F PVC (SWR) bends 110 mm dia complete all as specified and directed.

S & F in repairs rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), white colour, triple layer construction, ISI marked, hoisted & fixed in position as required complete all as specified and directed.

SAXENA BANDHU

M/S ASM ENTERPRISES

M/S SDS Construction Co.

M/S KUSHWAHA BROTHERS

Lalta Prasad vijay kumar Forwarding Agency