Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.8 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹38.0 L+₹3.2 L (9.30%)Rejected-AOC 21 JHAMRI 151 JHAMRI JHAMRI ROHTAK HARYANA 124142 UDYAM HR 07 0030314 | JHAJJAR | HARYANA | 124142 | L2 | Rejected-AOC Rejected due to not being L1 |
Tender Value
Refer Docs
EMD Value
₹71,400
Closing Date
5 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH UDHAMPUR
GE NORTH UDHAMPUR
GE U(N) 62 2022 23 PROVISION OF 1 COMMON TOILET FACILITY IN BLDG NO P80 INCLUDING SOME REVENUE AND MINOR WORKS AT DIFFERENT LOCATIONS UNDER GE(N) UDHAMPUR
2022_MES_567205_1
GE/U(N)/62/2022-23
Open Tender
Civil Works
Item Rate
60 days
GE NORTH UDHAMPUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE NORTH UDHAMPUR
₹71,400
Yes
11 Jan 2023
3 Dec 2022
7 Jan 2023
3 Dec 2022
5 Jan 2023
17 Dec 2022
Amount
M&L for dismantling of floor hearth or wall tiling incl CM, bedding (but not backing) removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed by Engr in charge
M&L for demolition of cement concrete of any description and in any position not otherwise specifically provided for cement concrete complete all as specified and directed by Engr in charge
M&L for surface excavation not exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed by Engr in charge
M&L for excavation in trenches n.exc 1.5m wide & n.exc 1.5m in depth getting out in any type soil complete all as specified and directed by Engr in charge
M&L for excavation in post holes in any type of soil each nexc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers nexc 25mm thick complete all as specified and directed by Engr in charge
M&L for removing excavated surplus material (Soils) to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engr in charge
M&L for returning filling in including spreading leveling watering & well ramming in layer not exc 25cm thick. complete all as specified and directed by Engr in charge
M&L for earth filling under floors including watering and consolidation complete (earth shall be used from excavation free from vegetation, pebbelse/foreign materials complete all as specified and directed by Engr in charge
M&L for hard core of broken stone or boulders n. exc 63mm gauge, deposited speed and leveled in layers n. exc 15cm thick, watered and rammed to a true surface as in floors complete all as specified and directed by Engr in charge
M&L for providing Precast cement concrete 1:2:4 type B-1 Using 20 mm graded stone aggregate as in kerb Stones and in similar work bedded ad jointed in CM 1:6 incl necessary exc if necessary complete all as specified and directed by Engr in charge
M&L for plain Cement concrete 1:2:4 , type B-1 , (using 20mm graded crushed stone aggregate), in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates and similar works including weathering, slightly rouinded for chamfered angles and throating and necessary form work, complete all as specified and as directed by Engr-in -Charge.
M&L for cement concrete type B-2 (1:2:4) 40mm graded agg as in foundations and mass concrete/ surface channel complete all as specified and directed by Engr in charge .
M&L for plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundation filling in post holes complete all as specified and directed.
M&L for plain cement concrete 1:4:8 type D-2 (40MM aggregate) as in foundation and mass concrete complete all as directed & specified.
M&L for reinforced cement concrete M-25 type B1 Design mix (using 20mm graded crushed stone aggregate) as in foundations, rafts, footings, fillings, plinth beams etc or siilar works, complete all as per specified & directed by Engr-In-Charge.
M&L for reinforced cement concrete M-25 type B1 Design mix (using 20mm graded stone aggregate)as in columns, struts, piers or similar works, complete all as per specified & directed by Engr-In-Charge.
M&L for reinforced cement concrete M-25 type B1 Design mix (using 20mm graded stone aggregate) as in lintel, bems, cantilevers or similar works, complete all as per specified & directed by Engr-In-Charge.
M&L for reinforced cement concrete slab M25 type B1 Design mix (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams etc or similar works, complete all as per specified & directed by Engr-In-Charge.
M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius in cement mortar 1:4 for parapet walls/ railings/ manholes/ drains etc complete all as specified and directed by Engr in charge
M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius in half brick thick built in cement mortar 1:6 complete all as per specified & directed by Engr-In-Charge.
M&L brick work with CM (1:6) class 'B' bricks st or curved on plan exc 6m mean radius complete all as specified and directed by Engr in charge
M&L for formwork to soffits of suspended slabs such as roof slabs not exceeding 200m thick (Horizontal or sloping) finished fair and even surfaces of concrete complete all as per specified & directed by Engr-In-Charge.
M&L for formwork to soffits of suspended slabs such as in floors, etc n.exc 20cm wide fair and evn surfaces of concrete complete all as per specified & directed by Engr-In-Charge.
M&L for formwork to sides of concrete foundations, footings, bases of columns rafts beam sides finished fair and even surfaces of concrete complete all as per specified & directed by Engr-In-Charge.
M&L for formwork to sides of columns, pillars, posts finished rough surfaces of concrete complete all as per specified & directed by Engr-In-Charge.
M&L for form work to sides of beams, cantilever, roof beams finished rough surfaces of concrete complete all as per specified & directed by Engr-In-Charge.
M&L for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. complete all as specified and directed by Engr in charge
M&L for mild steel bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr in charge
S&F Joist, channel, angle, or tee sections, fixed independently(Fe- 290 (Gde E- 165)) without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed by Engr in charge.
S&F framed work as in roof trusses, main rafters, purlins where connected with cleat or other connecting plates complete all as specified and directed by Engr in charge
S&F plates sq cutor notched with out any attachment FE-410(Gde-250 quality A) complete all as specified and directed by Engr in charge
M&L for MS work tubular including special shaped washer etc complete using ERW or induction butt wedded tubes confirming to IS-1239 (Part-I-1990) complete all as specified and directed.
M&L for roof trusses (framed) trusses purlins cranes/ granttries, rails & fastering & heavy bracket cleats (including distanence pleus cuats etc) Fe-410 W (Gdr-E-250 quality-A) complete all as specified and directed.
M&L for rolled mild steel plates (plain & cheaqured ), square cut or notched (ordinary or counter sunk) forming holes etc of Gde Fe-410S. any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 MPA as in roof cavering fixed with hooks or screw complete all as specified and directed by Engr in charge
S&F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheeting 0.50mm thick of an colour having tensile strength of 550 MPA as in roof covering fixed with hooks or screw complete all as specified and directed by Engr in charge
M&L for plain cement concrete(1:4:8) Type D-2(using 40mm graded stone aggregate) as in floors or paving’s 75mm thick complete all as specified and directed by Engr in charge
M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and smooth with using extra cement complete all as specified.
M&L for 50mm thick plain cement concrete type C1 1:3:6 (using 20mm graded stone aggregates) as in plinth protection finished fair and even without extra using cement complete all as per specified & directed by Engr-In-Charge.
M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick set and jointed and pointed in neat cement slurry with gray cement pigment cement and pigments complete all as per specified and directed by Engr-in-Charge.
M&L for machine pressed precast interlocking paver blocks any shape and size with greg Cement and pigment confirming to IS 15658-2006 of 60mm thickness (M-35Grade complete all as specified and directed by Engr in charge
M&L for and cushioning bed (filling under floors) incl spreading leveling watering if required complete all as specified and directed by Engr in charge
M&L for any Coloured vitrifired ceramic tiles 10mm thick (square) polished , light shade, area of each tiles exc 0.18 sqm but n.exc 0.38Sq.m (min. size 600mm x 600mm) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl 15mm thick screed bed in CM (1:4) complete all as specified and as directed.
M&L for any Coloured vitrifired ceramic tiles 10mm thick (square) polished , light shade, area of each tiles exc 0.18 sqm but n.exc 0.38Sq.m as in skirting, etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl 10mm thick rendering in CM (1:4) complete all as specified and as directed.
M&L for coloured vitrified ceramic tiles 10mm thick (square) polished, light shade, area sqm of each tiles exc 0.18 sqm but n.exc 0.38sqm (min. size) 600mm x 600mm) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl 15mm thick screed bed in CM (1:4) complete all as specified and directed.
M&L for vitrified ceramic tiles any colour 10mm thick (Square or rectangular) polished, area of each tile not exceeding 1.00 Sqm in floor etc, Set and jointed in neat cement slurry and pointed in cloured cement to match, including skirting including bedding layers of CM 1:4 (10mm thick) all as per specified & directed by Engr-in-Charge.
M&L for non skid coloured glazed ceramic tiles area of each tile exc. .11 sqm but n.exc. .18 sqm 7mm to 8mm mm thick as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match ,including bedding layaers of CM 1:4 (10mm thick) complete all as specified and directed by Engr in charge
M&L for non skid ceramic tiles, coloured, joint less of size 400mmx400mmx7mm, first uality as in floors etc, set and jointed with neat cement slurry and pointeed in white cement with pigment to match the shade of tiles over and including 10mm thick screed bed in cement mortar 1:4 complete all as per specified & directed by Engr-In-Charge.
M&L for glazed ceramic coloured tiles 450mmx300mm x7mm thick, first quality as on skirting, dados , walls etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as per specified & directed by Engr-In-Charge.
M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in cement mortar 1:4and finished even and smooth mixed with water proofing compoundcomplete all as specified and directed by Engr in charge
M&L for 10mm thick rendering on fair faces of brick/ concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed by Engr in charge
M&L for rendering 5mm thick in cm 1:3 on ceiling finished even & smooth W/O using extra cement incl three coat of white wash on ceiling complete all as specified and directed by Engr in charge
M&L for extra for forming fair finished drain or channel upto 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified and as directed .
Supply only integral water proofing compound complete all as specified and directed by Engr in charge
M&L for preparation of any surfaces over 10cm in width or girth not otherwise described and applied to two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed by Engr in charge
M&L for two coats of oil bound distemper over a coat of primer over two coats of approved wall care putty over and including preparation of old plastered surfaces of wall complete all as specified and directed.
M&L for preparation of new or previously untreated steel or iron surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for two coat of cement base paint over newly plastered surfaces of wall including one coat of primer and preparing surfaces complete all as specified and directed by Engr in charge
M&L for two coats of oil bound distemper over a coat of primer over two coats of approved 1 to 2 mm wall care putty over and including preparation of new plastered surfaces of wall complete all as specified and directed.
M&L for two coat of cement base paint incl preparation of newly plastered surfaces of wall complete all as specified and directed by Engr in charge
S&F powder coated anodised aluminium frame for doors/windows, entilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed by Engr-in-Charge.
S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cheats, clips ruber neoprene packing, handles 2 Nos in each door, hinges, anodosed aluminum snap beading screws etc. complete all as specified.
S&F 5mm thick tinted sheet glass ordinary quality and glazing with oil putty or wooden beads in squares exceeding 0.50 Sqm in each pane complete all as specified by Engr-in-Charge.
S&F Aluminium extruded section hydraulically door closer regulated designation no-1 universal type suitable for door shutter upto 700mm in width & weight not more than 35 kg all as specified & directed by Engr-in-Charge.
M&L for mortice lock, vertical type, size 100mm 4 lever complete all as per specified and directed by Engr-in-Charge.
S&F aluminium power coated sliding window three track including glazed panel shutter of standard section as per Site requirement with 5.5mm thick tinted glass fixed with rubber lining angles cleat and locking arrangement including PVC ball bearing etc complete all as specified and directed.
S&F non asbestos fibre Cement board ceiling 4mm, thick in 600x600mm panel (Make-everest) designed ceiling conforming to IS-14862 type B category three incl snapgrid frame work, hold fast, suspenderscomplete all as specified and directed by Engr in charge
M&L for solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engr in charge
M&L for cutting into exising manholes for connecting new drains (internal dia of pipe n.exc 200 mm), making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate) smooth finished, and reforming benching complete all as specified and as directed.
M&L for reinforced concrete pipes, class NP2 of 150mm bore laid in trenches and jointed with collars incl demolition & breaking of old unserviceable pipes complete all as per specified & directed by Engr-In-Charge.
M&L for concrete bed to drain pipes incl packing under, and haunching against the sides of pipes after they are laid and tested cement concrete type D2 1:4:8 complete all as per specified & directed by Engr-In-Charge.
S&F vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including CP waster coupling complete all as specified and directed by Engr in charge
M&L for urinal spreader of PTMT any colour for fixing wih 15mm dia pipe (minimum weight 60gms) complete all as specified and directed by Engr in charge
S&F vitreous china wash down water closet pan `P` or `S` trap ( pedestal pattern ) white including fixing bolts,including connection to drain pipe ( or out going pipe) and to flushing pipe,antisyphonage pipe etc complete all as specified and directed by Engr in charge
S&F vitreous china squatting pan (orissa pattern) size 580 x 440mm, white, with 'P' or 'S' trap front or back (excluding flushing cistern & flush pipe fixed as in repair including making good the disturbed surfaces and to match with existing surface, complete all as per specified & directed by Engr-In-Charge.
S&F with PVC valve less syphonic action type flushing cistern low level white with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc, set with concrete and making good to floor incluing taking down existing complete all as per specified & directed by Engr-In-Charge.
M&L for grating square with slit, (suitable for 150mm bore pipes) of PTMT (minimum weight 100gm) of shade matching to tiles/ floors), fixed with white cement including matching shade pigment, IN REPAIR, complete all as per specified & directed by Engr-In-Charge.
S&F PVC connections 15mm size with PTMT nuts of lengths 600mm complete all as per specified & directed by Engr-In-Charge.
S&F sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12cm wide with chrominum plated bracket guard and railing 600mm long with aluminium alloy brackets and guard rail complete all as per specified & directed by Engr-In-Charge.
S&F PVC (SWR) pipes single socketed in length, with rubber rings 100 mm dia fixed in walls etc, complete all as per specified & directed by Engr-In-Charge.
S&F PVC (SWR) pipes single socketed in length, with rubber rings 75 mm dia laid in trenches etc, complete all as per specified & directed by Engr-In-Charge.
S&F PVC (SWR) pipes single socketed in length, with rubber rings 75 mm dia fixed in walls etc, complete all as per specified & directed by Engr-In-Charge.
S&F cast iron soil, waste and vent pipe 100mm dia bore (ISI Marked) sand cast pipes, in any length with or without ears, in cement joint, laid in trenches or fixed in walls etc, complete all as specified and directed.
S&F cast iron soil, waste and vent pipe 75mm dia bore (ISI Marked) sand cast pipes, in any length with or without ears, in cement joint, laid in trenches or fixed in walls etc, complete all as specified and directed.
S&F cast iron soil, waste and vent pipe 50mm dia bore (ISI Marked) sand cast pipes, in any length with or without ears, in cement joint, laid in trenches or fixed in walls etc, complete all as specified and directed.
S&F PVC (SWR) gully trap of size 150 x 110 mm, setting and jointing with solvent cement complete all as specified & directed.
M&L for 75mm PVC (SWR) floor trap, plain with grating incl jointing with solvent cement concrete complete and making good the disturbed surface to match the existing surface, complete all as per specified & directed by Engr-In-Charge.
S&F PVC bend suitable for 100mm bore pipe (any radius), diminishing pieces or trapers (larger bore measured) with oval acess door, fixed as in repairs complete all as per specified & directed by Engr-In-Charge.
S&F PVC tee suitable for 100mm bore pipe (any radius), diminishing pieces or trapers (larger bore measured) with oval acess door, fixed as in repairs complete all as per specified & directed by Engr-In-Charge.
S&F PVC bend suitable for 75mm bore pipe (any radius), diminishing pieces or trapers (larger bore measured) with oval acess door, fixed as in repairs complete all as per specified & directed by Engr-In-Charge.
S&F slod PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing.
M&L factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.
S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, annodised and fixed, type B1. 100mm long complete all as specified and directed by Engr in charge
S&F extruded aluminium alloy handles, fabrcated type anodised 125mm complete all as per specified & directed by Engr-In-Charge.
S&F aluminium anodised barrel tower bolts of extruded section and fixed 125mm complete all as specified and directed by Engr in charge
S&F in repairs vitreous china wash basin white flat back size 580mmx450mm incl waste chain and plug and procelain stopper but incl bracket CP waste coupling & waste pipe fixed in repair complete all as per specified & directed by Engr-In-Charge.
S&F aluminium hooks (single) 50mm to 60mm complete all as specified and directed by Engr in charge
S&F towel ring of PTMT fixed wiith and incl chromium plated brass screws and wooden/ plastic cleats (minimum weight 90gms) complete all as specified and directed by Engr in charge
S&F towel rail 600mm long of PTMT fixed with and incl chromium plated brass screws and wooden/ plastic cleats. (minimum weight 190gms) complete all as per specified & directed by Engr-In-Charge.
S&F pin headed type and glazing with oil putty or fixed iin aluminium beading, I square exc 0.5sqm in each pane 4.0mm thick complete all as per specified & directed by Engr-In-Charge.
S&F rotational muolded PVC water tanks of capacity 500ltrs cylindrical verticle with closed top hoisted and fixed in position all as specified in SSR part incl fixing of 20mm PTMT float valve medium grade complete all as specified and directed by Engr in charge
S&F chromium plated 15mm dia bib taps fancy type with handle screwed down to high presure screwed from iron pipe complete all as specified and directed by Engr in charge
S&F GI water tubes 20mm bore dia medium grade galvansied (ISI marked) with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed by Engr in charge
S&F GI water tubes 15mm bore dia medium grade galvansied (ISI marked) with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed by Engr in charge
S&F angle valve/ stop valve, fancy type, chromium plated, concealed with adjustable wall flange), cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore and fixed in repairs, complete all as per specified & directed by Engr-In-Charge.
S&F chromium plated shower rose fancy type 125mm dia, swivel type suitble for 15mm bore fitting complete all as specified and directed by Engr in charge
S&F ball brass valves 20mm , high pressure, with polyethene float & fly-nut complete, screwed for iron pipe or brass ferrule & fixed complete all as specified and directed by Engr in charge
S&F stop cock fancy type Cromium plate concealed for 15mm bore complete all as specified and directed by Engr in charge
S&F in repairs pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated, screwed doen high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and flu nuts screwed for iron pipe of bore 15mm complete all as per specified & directed by Engr-In-Charge.
M&L for point wiring with PVC insulated unsheathed, FRLS 1100 volts grade stranded copper conductor cable single core 1.5 Sqmm for one light / fan point controlled by one way switch, and wire to be drawn in and including concealed conduit of dia not less tham 25mm complete with all accessories including MS sheet metal 1.2 mm thick switch board of suitable size be fixed flush wall , with 3 mm thick ebonite sheet cover and necessary screws, cap washers etc. or to be fixed on wall respectively as directed by EIC and providing earth continuity wire using PVC insulated, un sheathed single core stranded copper conductor FRLS cable of size 1.5 Sqmm.(Cutting chases for counduits shall be measured and paid separately) (a) Light point /fan point controlled by one switchSP 5 amp s 240 V.
All as per item No. 111 above but for one 5 Amps socket outlet on independent board.
All as per item No. 111 above but wire size 2x2.5 Sqmm and and providing earth continuity wire using PVC insulated, unsheathed single core stranded copper conductor FRLS cable of size 2.5 Sqmm. to controlled the 3 pin 5 / 15 Amps socket outlet on independent board.
S&F Switch Piano, flush type, One way, single pole, 5 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.
S&F Switch Piano, flush type, One way, single pole, 15 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.
S&F Two in one, 3 Pin, 5 Amps, flush type socket outlet complete all as directed by Engineer- in - Charge.
S&F socket outlet, flush type, One way, single pole, 15 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.
S&F Ceiling rose, 3 terminal, PVC / polycarbonet, isolated body complete all as directed by Engineer - in - Charge.
S&F Slim linear LED lighting fixture 20 watt LED batten, with full base of extruded aluminium section acting as a heat sink with closed back, isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete including taking down old US tube light fitting 1x36W and taken in schedule of credit all as per the direction of Engr-in-Charge. Make -Make model of Havells or equilent to CG/ syska CAT No SSK -SQ2001
S&F in replacement Slim linear LED lighting fixture 4W watt LED batten, with full base of extruded aluminium section acting as a heat sink with closed back, isolated driver, complete making all connection from ceiling rose to fittings including testing complete all as per the direction of Engr-in-Charge. Make -Make of LED -SYSKA as per ordering code SSK-SQ0401-4W or equivalent model of Havells or CG
Material and Labour for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below Normal ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised earth lead wire 4.0mm dia by means of GI nuts, bolts and washers of galvanised iron or steel all as shown in electrical plate no.5 connecting to earth test point all as specified or indicated including testing on complition with following:- (a) Test point GI wire 4mm dia . (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover. (d) Angle iron frame made of 40x40x4 mm angle iron for 30x30 mm PCC pit for holding the pit cover. (e) Angle iron frame made of 40x40x4 mm angle iron for 30x30 mm PCC pit for holding the pit cover.
S&Fsheet metal enclosure double door single pole and neutral 240 Volts for DB's when MCBs to be used 8 way with 200 amp rated bus bar with IP-43 protection. complete all as directed by Engr-in-Charge.
S&F MCB SPN 40 Amps, 240 Volts, 'C' Curve complete all as directed by Engr-in-Charge.
S&F MCB SP, 6 to 32 Amps, 240 Volts, rupturing capacity 10 KA "C" Series .) complete all as directed by Engr-in-Charge.
S&F Heavy duty turbo force single phase Exhaust fans PVC VENTIL AIR DXZ WHITE of 150mm sweep complete including fixing exhuast fan with grouting of nut & bolts complete all as as specified and directed by Engr-in-charge.
S&F security (street) light fitting 25/30 watt, new generation energy saving & environmental friendly long life versatile pressure die cost aluminium IP 66 with acylic, powder coated, pressure die cast aluminium compact high power LED street light with heat resistant toughed glass, corrosion resistant, isolated driver, including provision of GI tubing bracket of suitable size and fixed on wall including clamps, nut, bolts and washer for fixing of security (street) light completet including taking down old US light fitting of any type /size and taken in schedule of creditall as per direction of Engr-in-Charge. Make:SYSKA Cat no SSK-ST-25W(S) or equivalent in Havells Cat No : ENDURACITYLITEPLATPLUSSL30WLED757SASYBOPC, Wipro CAT NO: D923065
KUMAR CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .