SPECIAL REPAIR TO BLDG NO. EW-6 FOR EST OF LASER AND DERMATOLOGY OPERATION THEATRE OF DEPARTMENT OF DERMATOLOGY, OF BASE HOSP UNDER GE (E/M) LUCKNOW.

Amount

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and getting out in soft/loose soil, complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete

Returning, filling in, including spreading, levelling, watering and well ramming in layers nexc. 25cm thick in soft/loose soil all as specified and directed.

Removing of surplus excavated soil to a distance n.exc 50 mtr and deposited where directed at a level n.exc 1.5 m above the starting point, complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

S&F in 0.50 mm Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting made to any shape or Semi-ciruclar any colour having tensile strength of 550 Mpa as in roof covering/ cladding complete with tapping screw complete all as specified and directed.

All as per item No 6 here-in -before but plain sheet on ridge/gutters

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Roof trusses (framed), trussed, purlins, post,pillers and fastenings (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-grade E-250

Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated fe410 gde E250

Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, fe410 gde E250

M&L MS nut and bolt n exc 12 mm dia and length n exc 5 cm long

M&L for preparing new steel steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for preparing old steel steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint all as specified.

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets incl frames.

Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre all as speciofied .

S & F Wire netting of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples Size of mess 12mm

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately)

M&L applying two coats of plastic emulsion paint interior quality any shade on new ceiling surface including priming and preparation of surface complete all as specified and directed by EIC.

Taking down chowkhats with shutters(without taking off) of any description not exc 1.5 Sqm each

Taking down chowkhats with shutters(without taking off) of any description exc 1.5 Sqm but nexc 4 Sqm each

S & F solid door frame of size 50mmx47mm made out of 5mm thick PVC sheet prelaminated on single side and plain on other side, reinforced with MS square tube including painting of edges to match with prelaminated sheet, fixed in opening as per specification & drawing

S & F for factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struk

S&F Anodised aluminium powder coating (min thickness 50 micron) frame for doors, windows, ventilators 2 mm th with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F aluminium sections ( conforming to IS) door Single/double leaf shutter/sliding shutter with 44.45mm wide fabricated with 1.5 mm thick section having vertical and top rail 83.50mm, bottom rail and middle rail 115mm and including necessary jointing cleats, screws, neosprene rubber beading, PVC packing, tinted glass panes 6 mm nominal thickness incl necessary fitting, channel, track etc complete all as specified and as directed.

S & F for powder coated aluminium extruded sections (conforming to IS) (minimum thickness of powder coating 50 micron) three track sliding window shutter comprising series-C (20mm) , duly fitted with neoprene beading, glazing clipss, locking devices, heat absorbing glass 4.8mm thickness (in 2 shutters) and with SS wire cloth of 0.46mm nominal dia of wire and average width of aperature 1.4mm (in one shutter) including nessary fitting complete all as specified and directed.

Anodised aluminium powder coating in thickness 50 micron) ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specifie

Dismentling of old Aluminium partion wall

S & F in rerpairs for powder coated aluminium extruded sections (conforming to IS) (minimum thickness of powder coating 50 micron) partition wall,with frame comprising series-C (20mm) , duly fitted with neoprene beading, glazing clipss, locking devices, heat absorbing glass 4.8mm thickness (in 2 shutters) complete all as specified and directed.

M&L for 4mm thick sheet glass ordinary quality and glazing fixed with wooden beads in squares not exc. 0.5 Sqm in each panel complete all specified and as directed by Engineer-in-Charge.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks or galvanized wire staples complete all as spd & directed

S & F aluminium anodized barrel tower bolt of extruded section, 150 mm long complete all as spd & directed

S&F for 100 mm size butt hinges extruded stainless steel

S&F aluminium handle 125 mm size,cast type, anodised complete all as spd & directed.

S & F (in repair) 25 mm dia fancy type drapery curtain rod made of stainless steel complete all as specified

S & F Powder coated brackets for fixing curtain rod of any dia and fixed complete all as specified

M&L for PCC Type B1 1:2:4 (using 20mm graded aggregates) as in kerb stone all as specified

M&L for 75 mm th PCC Type B1 1:2:4 (using 20mm graded aggregates) as in flooring rough finished concrete complete

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) & removing & rubbish off the premises all as specified and directed by EIC.

M&L for non skid ceramic tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4

M&L for glazed colour joint free ceramic tiles of size 350x250x7mm/ 450x350x7mm thick any tint, on vertical surfaces set and jointed in neat cement slurry and pointed in white / coloured cement to match over and including 10 mm thick rendering on wall in cement mortar 1:3all as specified and directed.

M&L for Dark shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) (double charged) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4 all as specified and directed.

Taking down cement plaster on brick wall, racking out joints hacking for key scrubbing down with water all as specified and directed.

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles all as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius in half brick built in cement mortar 1: 4

M&L for rendering 15 mm thick on brick work/ concrete surfaces in cement mortar 1:6 on fair faces finished fair & even

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work surface finished even and fair without using extra cement (Note : Integral WPC shall be measured and paid seprately )

M & L for 10 mm thick rendering on concrete surfaces such soffits of roof slab etc in CM 1:3 , finished fair & smooth w/o using extra cement.

Supply only integral WPC of approved quality

Preparation of newly plastered surfaces and applying two coat of plastic paint over one coat of oil base primer all as specified on walls surface.Incl a coat of 3mm wall care putty.

M&L for applying two coats of Exterior appx paint over 2mm avg thick wall care putty over newly plastered surfaces including preparation complete.

M & L for preparation of newly plastered surfaces of ceiling and applying three coat of white wash all as specified

M&L for complete removal existing treatment and applying two coats of Plastic paint white or tinted over a coat primer on wall sufaces.Incl a coat of Brila / JK wall care putty.

M&L for complete removal of existing treatment and applying two coat of Exterior appx paint over putty of avg thk 2mm incl preparation of surfaces on old wall surfaces complete all as specified and directed ( Make - Weather coat from Berger/Apex from Asian paints)

Demolition of cement concrete (un-reinforced) in ground floors and paving n. exc 15 cm thickness (below or above ground level)

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection/path and the like all as specified and directed.

M&L for Cement concrete type D2 1:4:8 (using 40mm graded stone aggreages) as in foundations, filling, sub base in floors and mass concrete all as specified and directed.

M&L plain cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills,steps; seismic and other similar band, shelve, copings, covings bed plates, and like including weathering slightly rounded or chamfered angles

M & L for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate)

Dismantling water tank of capacity exc 500 and n.exc 1000 litres

S&F Rotational moulded polyethylene coloured water storage tanks (cylinderical vertical with closed top) hosted and fixed in position (1000 Litres capacity) all as specified & directed by EIC.

S&F Ball brass valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 20 mm bore pipe

S & F in repair 20mm dia gun metal or gate valve with ironwheel head screwed both for iron pipe and fixed

Cutting Chases, pining in, making good to facing where where required and pointing in cement martor 1:3 to ends or edges of landing , steps cills, sunshades, sheleves, lentels etc cutting chases for concealed water tubing or concealed wiring etc making good, cutting exceeding 10 cm but nexc 20 cm girth in brick walls

Taking up or down steel tubing and connections 15 mm bore including cleaning for refixing or removal to store.

Taking up or down steel tubing and connections 20 mm bore including cleaning for refixing or removal to store.

S&F tubes 15 mm bore "medium grade" with all fittings & fixed complete to wall and ceilings or laid in floor all as specified and directed.(make :- TATA / JINDAL / QST)

S&F tubes 20 mm bore "medium grade" with all fittings & fixed complete to wall and ceilings or laid in floor all as specified and directed.(make :- TATA / JINDAL / QST)

S&F in repair bib taps for 15 mm bore pipe cast copper alloy chromium plate with capstan head,fency type screwed down, screwed for iron pipe and fixed

S & F 15 in repairs mm bore Basin mixer with swipespout deck mountain installation type CP with screwed for iron pipe (bore of pipe 15mm) on basin

S & F 15 in repairs mm bore Basin mixer with swipespout deck mountain installation type CP with screwed in counter top for iron pipe (bore of pipe 15mm) on counter top

S & F in repair virteous china wash down water closet pan (pedesatal pattern) white (excluding fixing bolts, flushing cistern and flush pipe

S & F in repair PVC valveless, syphonic action type 10 ltrs flushing cistern low level white with inlet, ball valve float and handle incl brackets complete all as specified & directed.

S&F PVC connection for 15 mm bore pipe (Length 450 mm approx)

S&F(in repairs) CP brass tubular towel rail 20 mm dia and 600 mm long including brackets all as directed by EIC

S&F angle valve /stop valve single way cast copper alloy, fancy type, chromium plated with cup (concealed type) (bore of pipe 15 mm) all as specified and directed.

S&F in repair vitreous china wash basin (WHB) , white , flat back , size 550mmx400mm including brackets, waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting

S&F in repasird for Oval shaped Vitreous Cliina wash basin, size 560x410 mm fixed on granit plateform incl complete fixing accesaoried and bottle trap with connnection complete

Supply only waste fittings, brass, chromium plated for glazed ware basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed (32 mm bore)

S & F for 32mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed

20mm thick Granite (of any type)work polished) in steps, jambs, pillers window-cills cooking plateform and like in in CM (1:4) pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing voer 15 mm th screed bed in CM 1: 4 complete all as specified

S&F in repairs Vitreous China Urinal, Half stall type, white with grating , union,connection pipe and discharge pipe complete all as specified

M&L for RCC 1:2:4 type B1 20mm graded stone agg) in cover slab & similar items.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S or Fe-410-0.

M&L PCC 1:3:6 type C2 using 40 mm graded stone agg as concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and teste

M&L reinforeced concrete pipe, 150 mm bore class NP 3 with one coller per length of pipe laid and jointed in trenches complete all as specified

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar 150 dia

Taking down pipes (any size) incl all fittings

S &F 110mm bore (SWR) pipe single socketed in any length with rubber ring joints,fixed to walls

All as per item No 92 here-in-before but dia of 75mm

S & F 110mm bore PVC(SWR) junction single (single Tee) equal or unequal with access door

All as per item No 94 here-in-before but dia of 75mm

S&F 110mm bore PVC (SWR) bend of any radius

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement

Demolation of reinforement cement concrete any type

Taking down carefullycopper/aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, sockets ceiling rose sketch light fittings etc, and making good the disturbed surface of walls and floors etc as directed.

M&L for Point wiring complete with 1.5 sqmm PVC (FRLS) insulated stranded copper conductor single core cable drawn through rigid non metalic PVC conduit and conduit accesseries fixed on concealed of walls/ceiling pressed modular metal flush box 1/2 module to 8 module concealed in wall duly painted with two coat of black bituminous paint over a coat of red oxide primer plasticalong with white cover plate with plate up to 8 module for housing modular switches, and sockets, 1.5 sqmm PVC insulated (green insulation copper conductor) earth continuity cable drawn with wiring and connected to common earth dolly all as specified for :- (Modular frame and plates will paid seperately) For following points:-

(a) One light/fan point controlled by one switch

(b) One socket outlet point 5 Amp on the same board

(c) One socket outlet point 5 Amp on an independent board

(d) All as item no 103 (c)herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15 Amp socket out let point on an independent board.

S&F modular switches 1 way 6A,1 module

S&F modular 6 A sockets-2/3 pin 2 module complete

S&F modular switches 1 way 16A,1 module

S&F modular 6/16 A sockets-2/3 pin 2 module complete

S & F ceiling rose surface bakelight two to three terminal complete as directed

S&F Modular white cover plate with frame 3 module

S&F Modular white cover plate with frame 6 module

S&F Modular white cover plate with frame 8 module

Supply & fix modular fan regulator 100 / 100 W, in 2 Module for ceiling fan and connecting as directed.

S&F modular enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amps

S&F in replacement of double door VTPN 4 way double door suitable for 4 pole MCCB 125A, 415 V as incoming & SP/TP MCB as outgoing 200 Amps rated Busbar, inter connection link, cable ties,earth bar etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete all as specified and directed by Engr-in-charge. ( Note: MCCB-01 No of 125A & MCB- 04 no of 32A and MCB - 08 no of 63 A to be measured and paid under this item )

S&F in repair distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 8 way with 200 Amps rated copper busbar, neutral bar, earth bar, IP 43 protection, single pole and neutral 250 Volts, fixed flush to wall complete all as specified and directed.

S&F in repair distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 4 way with 200 Amps rated copper busbar, neutral bar, earth bar, IP 43 protection, single pole and neutral 250 Volts, fixed flush to wall complete all as specified and directed.

S&F in replacement MCB single pole 6 to 32 Amp 240 volts 10 KA breaking capacity complete as directed.

Ditto as item No 118 herein before but 40 Amp, 240 volts, single pole & neutral complete as directed.

M&L for Sub main wiring with two single core PVC insulated cable with 4 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)

M&L for Sub main wiring with two single core PVC insulated cable with 10 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 10 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)

M&L for Sub main wiring with four single core PVC insulated cable with 10 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 10 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)

Supply and Fixing in replacement of wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.

Supply and fixing in replacement of wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.

Supply and fixing(in repairs) of Recess LED llight fittings of size 2X2 36 watt LED made of CRCA powder quoted finish with Fully Covered by PMMA Acrylic Lumio Diffuser, LED Used shall be SMD type and fixture including cutting and making false ceiling of any pattern/mtrl proper fixing of light in falce ceiling , electrical connection up to 15 feet height of various ward and dept all as specified and directed.

S&F in replacement of LED Building security light 35 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts.

S&F ceiling fan 1200mm sweep, BEE star rated, bldc motor, AC single phase, 230/240 volts white colour complete with fan motor, blade, down rod, canopy and provn of connection with three core flexible copper wire cable of size 1.50sqmm from ceiling rose to fan complete all as specified and directed.

Supply, installation testing and commissioning of storage type water heater 25 ltrs capacity , 5 Star rated , vertical mounting type complete made out of CRCA outer body, copper storage tank, heating element,thermostat,thermal cut out, glass wool etc. complete including making necessary electrical connections with suitable size copper multistranded cable all as directed by EIC.

Supply and fixing of heavy duty metal body exhaust fan single phase 230/240 volt of size 300 mm sweep including holes of suitable size ,grouting of nuts and bolt etc and making good to match the existing surface including louvers and making connetion with twisted copper flexible wire 23/0.076mm, including disconnecting and taking down old unserviceable exhaust fan and deposited in AGE E/M (W) store yard for BER action complete all as specified and directed.

supply and fix wall mounted fan 450 mm sweep (white) string controlled oscillating type with all accessories as per manufacturer norms fixed in position and connecting, complete as specified and directed by EIC

Supply and fixing in repair exhaust/fresh air fan 250 mm sweep (white) plastic body with louvers including provn of flexible three core cable from ceiling rose to terminal for making connection , fitting on wall including all necessary fixing accessories complate all as specified and as directed.

Disconnecting of ceiling fans / exhaust fan of any size from ceiling rose/connector for cleaning,servicing /oiling and greasing of fan by using appropriate grade of oil/grease and replacing defective parts such as bush bearing , split pin rubber bush, capacitor etc and rehanging the same after proper cleaning and making connection with ceiling fan/connector with flexible wire of size 23/0076 copper conductor multi stranded as directed by Engr-in-Charge.

M & L of Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of nut, bolts, check nut & washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade, watering pipe 20 mm dia GI light grade, GI wire mesh, GI funnel, alternate layer of char coal and salt, PCC chamber, recessed for and including RCC cover including all necessary excavation & earth work, earth 7.5 mtr wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 2009 complete all as specified and directed .

Supplying and laying or fixing in replacement, jointing and testing LT under ground electric power cable crossed linked polyethylene ( XLPE) insulated, galvanised steel strip or wire armoured, ISI-7098 Marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of size 50 sqmm cross sectional area, 3.5 core ,complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc. with and including MS Clamps, nuts , bolts, washers complete all as specified and directed. Note :- Excavation, earth work, sand cushioning, protection bricks/ tiles/ block and pipe shall be measured and paid separately under appropriate items.

Excavation in trenches not exc. 1.5 m wide and not exc 1.5 mtr deep in soft/loose soil for laying / taking up/ taking down of cables and getting out and levelling of bottom suface to required level all as specified and directed by Engineer- in- Charge.

Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . Note :- Punned thickness shall only be considered for payment

M&L laying well burnt old size bricks, sub class "B" bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified.

Boring of hole under road/pavement/hard standing or any other situation by manual means and suitable for passing of GI pipe 40 mm bore and making good both ends all specified and directed

S&F in replacement of GI Pipe (light grade) with necessary accessories/ fittings for cable protections/pole for crossing of culverts/nallah of 40 mm bore

Supply , install, commissioning and testing in replacement of commercial AIR CURTAIN unit for prevention of dust and conditioned air losses, three phase 440 V ,50 HZ, made out of MS/CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coats of synthetic enamel paint with MS-CRC 18 gauge square perforated suction grills aluminium alloy fans and single phase electric motor, nozzle etc complete with fittinfgs and accessories so as to produce 1-1.5 m/sec air velocity at floor level for door opening as specified

M/S S.B. Singh and Sons (BID ID -3278598)

M/s Vimal Traders (BID ID -3278797)

Sanjay Traders (BID ID -3277147)

M/s Vatsh Raj and co (BID ID -3278550)

ARORA BROTHERS (BID ID -3279035)

HI TECH COLONISERS PRIVATE LIMITED (BID ID -3279323)