PROVISION OF FALSE CEILING FOR 03 ROOMS IN CGOM BUILDING AT CGAE BHUBANESHWAR

Amount

M&L for Gl frame work for seamless ceiling of any pattern/design in two tier or special shape, ornamental design (Tray/Coffored/Cove type ceiling as approved design) comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre incluiding Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and Providing and Fixing 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish with screw as per manufacturers instructions complete all as specified and directed.

M&L for preparation of new ceiling surfaces, applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of oil bound Distemper, of approved manufacturer, of required shade and colour to match complete over one coat of alkali resistant priming paint complete all as specififed and directed.

M&L for preparation of old distempered surfaces of walls and applying one coat of oil bound distemper etc complete all as specified and directed.

Taking down copper/aluminium point wiring (light) complete, including light fitting and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M & L for point wiring with 1.5Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor , 1100 Volt FRLS graded single core cable for phase and neutral drawn through rigid pvc conduit med grade minimum 20mm size and its accessories complete concealed including provn of pressed steel terminal box of suitable size fabricated out of 2mm thick MS sheet top cover for fixing switches, SSC sheet top cover including one run of 1.5 sqmm copper conductor cable for earth continuty conductor, complete all as specified and directed. Note:- All the disturbed surfaces of wall / ceiling shall be made good to match the existing wall / ceiling finishes complete all as specified and directed. (a) One light point controlled by one 5/6 Amp one way switch.

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free warm colour light complete with drivers, holders,LED lampsuitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Taking down fan of any type, sealing cable end, dismantling blades and removing fan and blades and refixing again using extra down rod, Screw bolts, screw hook etc after fixing of Gypsum/ seamless false ceiling complete all as specified and directed.

Taking down carefully indoor AC units from the wall by disconnecting copper pipr, electrical connections and re fixing after complete of new ceiling including making hole on wall and using extra copper pipes, cables, cleaning and serviceing the AC units complete with changing of gas if any required for working complete all as specified and directed.

Supply and fixing LED profile light for ceiling of colour cool day light having 600 lumens per meter complete all as specified and directed.

Supply and fixing LED driver for profile light for ceiling of capacity up to 60 W, 5A and 12 V DC complete all as specified and directed.

SMART ENERGY SOLUTIONS (BID ID -3505459)

Likitha Enterprises (BID ID -3508846)