PROVN OF INTERLOCKING TILES, PATH, HARDSTANDING, STAINLESS STEEL BENCHES INSIDE PARK AT BHIM ROAD FAFA AND SPL REPAIR TO EXTERNAL PLASTERING, PAINTING IN BLDG NO. P-240 TO P-245 AT VAJRA COMPLEX IN THE AOR OF AGE BR-II UNDER GE (WEST) JALANDHAR CANTT

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in post holes (or similar holes) in soft/loose soil each n. exc. 0.5Cum, getting out, returning, filling in, and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to adistance n. exc. 50m and making good the disturbed surface complete all as specified and as directed.

Removing excavated material to a distance n exc 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Material and labour for hard core of broken stone or boulders gauge exceeding 63mm but not exceeding 100 mm deposited, spread and leveled in layers not exc.15 cms thick, each layer watered and rammed to a true surfaces complete all as specified and as directed.

Material and labour for cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base/foundation filling/mass concrete/sunken floor etc, complete all as specified and as directed.

Material and labour for 40-50mm thick sand filling under floors or in foundation including consolidation with plate vibrator before and after laying paver blocks etc complete all as specified and as directed.

Material and labour for 80 mm thick, machine pressed precast conctete (white) interlocking paver block M-40 grade, any shape and size, conforming to IS 15658-2006, with grey cement and no pigment, complete all as specified and as directed.

Material and labour for cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in sub base/foundation filling/mass concrete/sunken floor etc, complete all as specified and as directed.

Material and labour for cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in coping of tiles etc, complete all as specified and as directed.

Supply and fixing stainless steel benches (03 seater) as per sample approved by Engineer-in-charge complete all as specified and as directed.

Material and labour for 100mm thick cement concrete 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in floor surface finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 25mm thick cement concrete 1:2:4 type B-0, using 12.5mm graded crushed stone aggregate as in levelling course, surface finished rough to receive topping floor/tiles complete all as specified and directed.

Material and labour for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors laid over and including 20mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointing in white cement with pigment to match complete all as specified and directed.

Supply & fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws or fixed with ‘L’ & ‘J' hooks or cranked bolts complete all as specified.

Demolition of cement concrete (reinforced) of any description in ground floor and paving (below or above ground level) complete all as specified and as directed. Note : The rate shall include for scaffolding or any other arrangement required during this process upto triple storey height complete all as specified.

Material and labour for brick work with sub class 'B' bricks, straight or corvered on plan exc. 6.0m mean radius built in cement mortar 1:4 complete all as specified and as directed. Note : The rate shall include for scaffolding or any other arrangement required during this process upto triple storey height complete all as specified.

Material and labour for brick work with sub class 'B' bricks, straight or corvered on plan exc. 6.0m mean radius in any radius, in half brick thick wall laid flat built in cement mortar 1:4 complete all as specified and as directed. Note : The rate shall include for scaffolding or any other arrangement required during this process upto triple storey height complete all as specified.

Material and labour for mild steel high yield strength TMT bars 10mm dia and over cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Material and labour for mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Material and labour for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. Note : The rate shall include for scaffolding or any other arrangement required during this process upto triple storey height complete all as specified.

Material and labour for expanded metal, (weld mesh) weight not exceeding 4Kg per square metre cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members with nuts and bolts or fixed to RCC work or ceiling surface complete all as specified and directed.

Material and labour for repairing of RCC projections chajjas, roofs, facia etc at any height upto triple storey by necessary preparation, scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with welded mesh weighing 2 to 3 kg per sqm as per requirement and finishing the surfaces even and smooth with cement and sand mortar (1:3), 5mm thick, the thickness of projection to be repaired shall be 70mm to 80mm including necessary formwork and finishing the surfaces to match with the existing complete all as specified and directed by Engr-in-charge. Note : The rate quoted by the contractor shall be included for scaffolding, welded wire mesh etc.

Taking down cement plaster of any description on brick or concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed. Note : The rate shall include for scaffolding or any other arrangement required during this process upto triple storey height complete all as specified.

Material and labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all specified and as directed. Note : The rate shall include for scaffolding or any other arrangement required during this process upto triple storey height complete all as specified.

Material and labour for 5mm thick rendering in cement mortar 1:3 on fair faces of brick work or concrete ceiling surfaces finished even and smooth without using extra cement complete all specified and as directed. Note : The rate shall include for scaffolding or any other arrangement required during this process upto triple storey height complete all as specified.

Material and labour for preparing new plastered or unplastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

Complete removal of existing treatmentincluding scrapping down smook soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including preparation of old plastered or un plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

Complete removal of existing treatment from wall surfaces and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed. Note : The rate shall include for scaffolding or any other arrangement required during this process upto triple storey height complete all as specified.

Material and labour for preparation of old wood or wood based surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer including removal of existing finish complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description, not otherwise described not exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of read oxide primer complete all as specified and as directed.

Material and labour for preparation of old steel surfaces of any description, not otherwise described not exceeding 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed. Note : The rate shall include for scaffolding or any other arrangement required during this process upto triple storey height complete all as specified.

Taking up 75mm bore cast iron/PVC drain pipes (including fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed.

Taking up 100mm bore cast iron/PVC drain pipes (including fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls complete all as specifid and as directed.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls complete all as specifid and as directed.

Supply and fixing 75mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

Supply and fixing 110mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

Supply and fixing 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.

Supply and fixing 75 mm bore sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in floors or fixed to walls complete all as specifid and as directed.

Supply and fixing 100 mm bore sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in floors or fixed to walls complete all as specifid and as directed.

Supply and fixing 75mm bore sand cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

Supply and fixing 100mm bore sand cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

Supply and fixing 100mm bore cast iron cowl complete all as specified and as directed.

Supply and fixing 75mm bore sand cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and fixing 75mm bore sand cast iron branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and fixing 100mm bore sand cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and fixing 100mm bore sand cast iron branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

KARTIK BUILDERS

NATIONAL BUILDERS

HYLAND CONSTRUCTION COMPANY

G S TRADERS