Electrical Works to Panankuppam Museum at Villupuram District

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 4 points / Coil) Higher End

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End

Supply and fixing of fancy glass shade and 7W / 9W LED bulb.

Supply and fixing of single box type 4' 18 W LED fitting complete with TW round blocks on wall or ceiling with 18 W LED tube light with Single side connection (Havells / equivalant) with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of Aesthetically desined ultra modern 24 W 1' x 1' High efficacy 1x1 recess LED flat panel with high brightness LED for glare-free homogenous illumination. Also for POP ceilings LED fitting (Havells/ Equivalent) on wall or ceiling, with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of Aesthetically desined ultra modern 15 W down Light (Havells / Equivalent) on wall or ceiling, with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of Aesthetically desined ultra modern 34 W 2' x 2' Recess Mounting luminaire with high brightness LED fitting (Havells / Equivalent) on wall or ceiling, with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of Aesthetically desined ultra modern 36 W 4x1' Recess Mounting luminaire with high brightness LED fitting (Havells / Equivalent) on wall or ceiling, with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of LED Indoor hanging light (Chandlier Light) lamp fitted on the ceiling with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting.

Supply and fixing of 1200mm (48”) AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the Fan MS box clamp (Crompton high speed make).

Supply and fixing of 1 no. 6A two module 3 pin socket, 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End

Supply and fixing of 3 nos. 6A two module 3 pin socket, 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End

Supply and fixing of 1 no.6/16A two module socket, 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 4 way single pole and neutral MCB sheet steel enclosure Distribution board with Metal Door and 1 No 100 Amps FP MCB as incoming in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB’s should be Legrand (MDS) / Hager(L&T).

Supply and fixing of 4 way single pole and neutral MCB sheet steel enclosure Distribution board with Metal Door and 1 No 63 Amps FP MCB as incoming in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB’s should be Legrand(MDS) / Hager(L&T).

Supply and fixing of 4 way single pole and neutral MCB sheet steel enclosure Distribution board with Metal Door and 1 No 32 Amps FP MCB as incoming in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB’s should be Legrand(MDS) / Hager(L&T).

Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour.

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion.

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire conection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire conection of 6 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire conection by 6 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire conection of 10 sq.mm copper wire and making good of the concealed position.

Supply and run of 4 of 16sqmm (101/0.45) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour.

Supply and laying of 4 x 16 sq.mm. PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and Laying of 3 1/2 x 150 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 4 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and clamping of 3-1/2 x 150 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 4 x 25 sq.mm. LTUG armoured cable with earth connection.

Supply and fixing of brass cable gland for 3-1/2 x 150 sq.mm. PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3-1/2 x 150 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and fixing of 3 Phase 200 A aerial fuse unit for 3 Nos 200 A fuse units (500V) on suitable MS sheet covered with 6mm thickhylem sheet on suitable angle iron work the tapping pole with necessary clamps.

Supply and fixing of 250A sub-panel (Power & Lighting) Design, Supply, erection, testing and commissioning of 250A floor mounted cubical panel board bus bar chamber dust and vermin proof and accommodating the following d sine with Thermal Magnetic Release MCCB’s units with the following items of work complete to satisfy the latest IE rules and CEIG guidelines. Supply and fixing of suitable bus bar chamber made up of 16SWG MS sheet steel(1.6mm) with 4 Nos. of 1” X ¼ ” tinned copper bus bar for 3 phases and neutral (25mm x 6mm) and 2Nos. of ear thing bus of size 1” X 1/8 tinned copper bus(25mm x 3mm) on suitable bus bar insulator (Epoxy insulator) with maximum creepage distance and supported on MS Base channel frame work of size 4”X 2”X ¼”–1Set Incoming 1)Supply and fixing of 1 No. 250A 4 pole 433V LT MCCB confirming to IS with Thermal Magnetic Release making capacity for easy maintenance as per CEIG, IE rules in force with inter connection and terminations as required in specification. Outgoing 1) S & F of 63 A 3Pole MCCB—8Nos 2) S & F of 100A 3PoleMCCB—2 Nos Inter connecting the all LT MCCB’s to bus bar with suitable insulated tinned copper flats and painting/PVC sleeve colour coding of phases and neutral indication. Double Earth connection of the MCCB’s to earth bus using suitable tinned copper flats by 2 runs of 1” X 1/8” Supply and fixing of LED lamp arrangements with toggle switches to the control to each phases and with rigid connection in suitable separate compartments within the cubicle by CEIG rules with , 2 sets of supply and fixing Electronic Multifunction Meter class 0.2S flush mounting L&T or equivalent make. Supply and fixing of danger board with Siemens grey powder coating with super Scribing the names of places to which supply is fed feeder sizes of cables

direction of cables etc. Erection of panel board complete with suitable foundation bolts and nuts including suitable M.S Channel, concreting, testing and commissioning (L&T,C&S,SIEMENS,ABB)

Supply erection, Testing and commissioning of 2 TR split type3 star rated AC units fitted with hermetically sealed Air compressor with R22 refrigerant air cooled condenser, fan etc. and 1 No indoor Hi wall mounted 2.0 TR capacity evaporator unit complete with cooling coil, blower motor and connected accessories, control etc chord wire connecting indoor and outdoor unit with drain pipe suitable for operation on 230V + 10% 50Hz sinle phase AC supply. (Make - Carrier/ OGeneral/ Daikin/ Toshiba)

Supply and erection of 5KVA automatic Voltage stabilizer suitable for 2TR Split type AC unit 230V, single phase, 50Hz AC supply with high/low cut off time delay with input voltage range 170V -270V and output range 200V-240V with 3min time delay relay with demonstration (Make like "Vguard")

Supply and laying of 5/8” and 3/8” copper pipe.

Supply and fixing of stand to fix place the outdoor of Split type AC units.

Supply and fixing of TNEB meter board suitable for 3 phase 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 200A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete.

Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp.

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection,

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.

Supply and fixing of 65mm dia GI pipe (Class 'B') 4 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting and construction of masonary pedestal with MS box of 30cm x 2cm x 10cm with angle iron frame work with door and lock and key arrangements with supply and fixing of 60 W LED street light fitting with bulb and with supply and fixing of 1No. 16A fuse unit (500V) and 5A SP switch inside the MS box with PVC unsheathed FRLS leads and painting of suitable colour.

Supply and Installation of 240 watts Mixing Amplifier Power handling capacity : 240 Watts Main Voltage : 230Vac ±10% 50/60Hz, S/N ratio>90dB.The amplifiers have 5 Mic inputs,100V output as well as 70V output for connecting to the loudspeakers with line matching transformers,8ohm and 4ohm outputs for connecting to the Low impedance speakers. Make:Bosch or Ahuja or equivalent

Supply and installation of 30 watts Speaker with effective frequency range (-10 dB)100 Hz to 18.5 kHz,Sound pressure level at rated /1 W (1 kHz,1m) 105 /90 dB (SPL). Make and Model: JBL/ Bosch/QSC/Ahuja

Supply and Fixing 15U Rack With Power Supply

Supply and installation of Mixing Consoles with 6 channel USB audio playback. Make and Model: Ahuja or equivalent

Supply and installation of DUAL CHANNEL UHF HAND WIRELESS MICROPHONE WITH RECEIVER. Make and Model: Ahuja or Equivalent

Supply of microphone which consists of long length goose neck microphone with ON / OFF switch, indicator, built in speaker. Make and Model: Ahuja-AGN 480 /equivalent.

Supply and run of 3 core of 2.5 sq.mm PVC insulated multi-stand copper microphone cable in suitable open PVC rigid pipe on wall.

Supply and run of 2 core 1.5 Sqmm Shielded copper speaker wire in suitable open PVC rigid pipe on wall .

Supply of XLR male and female connectors.

Supply and fixing of 5200 / 5000 LUMENS, LASER, WUXGA, Contrast ratio:1920X1200, 4K PROJECTOR

Supply and fixing of 8’ x 6’ Motorized Screen.

Supply and fixing of 3 Feet Ceiling Mount Kit.

Supply and fixing of 20 Metre HDMI Cable.

Supply and installation of 4 MP IP Indoor /Out door bullet/ WDR 3.6 mm fixed lens IR 60 m and other accessories make Hikvision/ eqivalent Model No. DS-2CD3T43GD-21)

Supply and installation of 32 channel Network video recorder with 8 sata camera recording in minimum of 720p resolution in full HD Hard disc support 4TB USB HDMI should be available with all accessories. (Make Hikvision/equivalent) Model No. DS-8632NI-K8

Supply and installation of 135W 24 port POE Gigabit switch which supports IEEE802 af/at poE standard (Make Hikvision/equivalent) Model No. DS-3E0318P-E/M

Supply and Installation of 4 TB built in Hard Disc Drive. (Each NVR for 2 Hard Disc) Make Western/equivalent

Supply and Installation fo 43 inches LED TV with following features (1) Clear Audio + (2)X-reality pro, (3) Motion flow XR 200. Make: SONY / Samsung / Equivalent.

Supply and Fixing of 6U rack (Wall Mounting) with power sockets and cable manager. Make: D-link / Equivalent.

Supply and Installation of 0.6 KVA UPS with suitable 12V, 7.2Ah, batteries with all accessories. Make: Intex / Equivalent.

Supply and Erection of 80 mm dia and 6-meter height heavy duty GI steel tubular pole for fixing 2MP PTZ IP Camera 360 Degree, 150m IR, IP66, Built in Heater with 6 feet depth concrete work with 16mm J-bolt fixing and necessary masonry work.

Supply and fixing of water drain pipe line. (1” PVC Pipe)

Supply and laying of Unarmoured Cat6 cable through Existing PVC rigid pipe in the wall/ceiling with necessary connection.

Supply and fixing of LED HELIOS Board Fixture (Bis) gate light fitting with E27 holder with 27 W LED lamp on gate with suitable necessary connection.

Supply and fixing of high brightness LED rope with rope driver kit and jointer.

Supply and laying of 2 core 1.5 sq.mm Cu. Cable in existing PVC pipe / truf on wall and ceiling. Make: Orbit / Equivalent.

Please Enable Macros to View BoQ information