REPAIR/MAINT OF WOODEN STEEL AND TP FURNITURE ITEMS INCLUDING PAINTING AND POLISHING AT AF STN BKT

Taking out existing old broken short rail from chairpoy GI 32 mm dia and providing in position 1 nos short rails made out of broken long rail obtained from taking down above item No 27(d) including threading on both ends complete fixing all as specified and shown on drg (Note : U/S check nuts to be replaced in above item and measured and paid as supply only under relevant items complete all as per specified and directed.

All as per item No 1 above but for rear leg (left or right).

All as per item No 1 above but for replacement of shoes with S & F new rubber / plastic shoe of superior quality with steel plated screws of suitable size complete.

our on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item including CP handle.

All as per item No 10 above as applicable but for replacement of shoes with S & F new rubber / plastic shoe of superior quality with steel plated screws of suitable size complete all as per specified and directed.

All as per item No 10 above as applicable but for Removal of u/s cane and supply and re-canning of chair dining with 2mm wide half round virgin premium white or approved colour plastic cane of approved make and quality except the border which shall be 3mm flat swide half round virgin premium white or approved colour plastic cane of approved make and quality and weaving must be in accordance to Godrej Pattern as shown on drawing FD-03(M)Sheet 1/1 complete all as per specified and directed.

LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF CHAIR DINING: All as per item no. 09 as applicable but for Chair Dining.

All as per item No 17 above as applicable but for replacement of shoes with S & F new rubber / plastic shoe of superior quality with steel plated screws of suitable size complete.

All as per item No 17 above as applicable but for Removal of u/s cane and supply and re-canning of chair easy with 2mm wide half round virgin premium white or approved colour plastic cane of approved make and quality except the border which shall be 3mm flat swide half round virgin premium white or approved colour plastic cane of approved make and quality and weaving must be in accordance to Godrej Pattern as shown on drawing FD-03(M)Sheet 1/1. All as specified and directed by engr-in-charge.

All as per item no. 56 above as applicable but for replacement of shoes with S & F new rubber / plastic shoe of superior quality with steel plated screws of suitable size complete.

All as per item no. 64 above as applicable but for S&F side stiffener made out of IInd class seasoned hard wood.

All as per item no. 81 above as applicable but for S&F supporting members of sofa set single or 3 seater made out of IInd class seasoned hard wood duly french polished of size and pattern all as shown on drg.

All as per item no. 81 above as applicable but for supply of new HR foam cushion Make-Sleepwell /Godrej /Kurlon / Duroflex or equivalent 100 mm thick 32 density duly 530mm W x 560 mm L x 100 mm Thick or as per drg covered duly approved and as directed by engr-in-charge .

All as per item no. 95 above as applicable but for Sides and partition with 12 mm thick BWR grade HDHMR Board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on both sides, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices.

All as per item no. 95 above as applicable but for Drawers including replacement of Knobs with chrome plated or brass knobs all as directed.

All as per item no. 95 above as applicable but for Looking mirror with new mirror of 5.5 mm thick make - Swastika/Modiguard / Atul free from destruction and other defects with complete teak wood frame enclosed with 6 mm thick plywood BWR type.

LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE DRESSING GENTS WITH MIRROR: All as per item no. 09 as applicable but for Table dressing gents with mirror.

REPAIR TO TABLE 900 X 600 X 760MM WITH/WITHOUT DRAWER :- Labour & Material for dismantling/ opening of joints / removal / repair of damaged/ broken parts or member of Table 900mm x 600mm x 760mm with drawer or without drawer as mentioned below where required and provision of replacement of the same member and fixing it, applying filler or putty in the minor cracks, and atleast two coats of polishing with French polish to the whole repaired table ( Qty of each polished item will be measured and paid separately) as per procedure mentioned in the particular specification after proper cleaning and preparation of the surface and proper dyeing to match with existing surface etc and also including shifting, transporting and stacking of furniture and equipment at the site and furniture store or yard alike by the contractors' own arrangement and cost. All as directed by Engr-in-charge. All as mentioned above as applicable for S&F Table top of size 900 mm x 600 mm made of 18 mm BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete all as per specified and directed.(FD-55/224/283/284)

All as per item no. 95 above as applicable but for Aluminum channel with standard aluminum channel having two 'U' shaped channels for sliding of plain glass of 5mm thick in qty as reqd for each table.

All as per item no. 95 above as applicable but for Plain sliding glass 5mm thick with new sliding glass in qty as reqd for each table all as shown in drg.

All as per item no. 104 above as applicable but for Back of table with 12mm thick ply wood commercial type BWR.

All as per item no. 104 above as applicable but for Side and partition with 12mm thick prelaminated HDHMR board BWR type teak veneered face on both side.

All as per item no. 104 above as applicable but for Bottom 12mm thick commercial BWR plywood all as specified and as directed.

All as per item no. 104 above as applicable but for drawers replaced with 6mm thick ply wood BWR type.

All as per item no. 104 above as applicable but for replacement of unserviceable looking mirror with new mirror of 5.5mm thick Make - Atul, Modiguard or Golden fish free from all defects with complete teak wood frame enclosed with 6mm thick ply wood BWR type.

LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE DRESSING LADIES WITH MIRROR: All as per item no. 09 as applicable but for Table dressing ladies with mirror.

REPAIR TO TABLE WRITING :-All as per items No 26 above but for Table writing. All as mentioned above as applicable for S & F top for table writing of 18 mm BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete all as per specified and directed. (FD-275)

All as per item no. 104 above as applicable but for Aluminum channel with standard aluminum channel having two 'U' shaped channels for sliding of plain glass of 5 mm thick in qty as reqd for each table.

All as per item no. 104 above as applicable but for Plain sliding glass 5mm thick with new sliding glass in qty as reqd for each table all as shown in drg.

LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF BOOK CASE WOODEN: All as per item no. 09 as applicable but for Book case wooden.

REPAIR TO TEAPOY :- All as per items No 26 above but for Teapoy. All as mentioned above as applicable for S & F top for teapoy made of 18 mm BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete. (FD-278)

All as per items No 113 above as applicable but for shelves for book case made of 19 mm thick BWR grade HDHMR of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.

All as per items No 113 above as applicable but for back for book case made of 06 mm thick BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.

All as per items No 117 above as applicable but for Removing of old unserviceable foot rest of bed & S&F of foot rest made as per existing size and shape or as per Drg IInd class hard wood incl polishing two or more coats of over a coat of wood filler after preparation of surface.

All as per items No 117 above as applicable but for Removing of old ply top and S&F new ply top of 12mm thick BWR grade plywood of make: Greenply/ Archidply/ Century Ply or equivalent as approved.

LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF BED PLYWOOD TOP: All as per item no. 09 as applicable but for Bed wooden plytop alongwith provision of metal L bend plate for supporting legs etc.

REPAIR TO TABLE PEG :- All as per items No 26 above but for Table Peg. All as mentioned above as applicable for S & F top for table peg made of 18 mm BWR grade HDHMR Board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete. (FD-277)

All as per items No 117 above as applicable but for Removal of old wooden stiffeners and S&F IInd class hard wood stiffeners of size 900 x 50 x 60mm suitable for bed all as shown in Drg incl polishing two or more coats of wood filler after preparation of surface etc.

All as per items No 117 above as applicable but for Taking out old unsv long rail of bed plywood and providing of new long rail of IInd class hard wood of existing shape and size all as specified and Drg incl polishing two or more coats over a coat of wood filler after preparation of surface etc.

All as per items No 123 above as applicable but for Top of table dining 8 seater of size 1800mm x 900mm or as per drg or existing table, made of 18mm thick BWR grade HDHMR Board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.

All as per items No 123 above but for Long rail of table dining 6 seater made of IInd class hard wood.

All as per items No 123 above as applicable but for Long rail of table dining 8 seater made of IInd class hard wood.

All as per items No 123 above as applicable but for Short rail of table dining 6 or 8 seater made of IInd class hard wood.

LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE DINING 6 OR 8 SEATER: All as per item no. 09 as applicable but for Table dining 6 or 8 seater.

REPAIR TO TABLE CENTRE WITH SUNMICA / GLASS TOP :- All as per items No 26 above but for Table centre with sunmica top or glass top. All as mentioned above as applicable but for S&F Top of Table Centre made out of 18 mm BWR grade HDHMR Board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete. (FD-274)

All as per items No 123 above as applicable but for legs of table dining 6 or 8 seater made of IInd class hard wood.

All as per items No 123 above as applicable but for replacement of rubber or plastic shoes steel plated, with SS Screws to the bottom of each legs.

Ditto all as per items No 131 above as applicable but for Short rail of side board made of IInd class hard wood of existing shape and size..

All as per items No 131 above as applicable but for Drawers of side board 18mm thick BWR grade HDHMR board with laminate as mentioned above.including replacement of CP Knobs, soft closing telescopic channel with fitment and fixation.

All as per items No 131 above as applicable but for Long rail of side board made of IInd class hard wood of existing shape and size.

All as per items No 131 above as applicable but for Back of side board made of 6mm thick ply wood commercial type BWR.

All as per items No 131 above as applicable but for Top of side board made of 18mm thick BWR grade HDHMR board with laminate as mentioned above.

All as per items No 131 above as applicable but for Sides of side board made of 18mm thick BWR grade HDHMR board with laminate as mentioned above..

LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF SIDE BOARD: All as per item no. 09 as applicable but for side board.

REPAIR TO SOFA SET 4 SEATER/5 SEATER :-Labour & Material for dismantling/ opening of joints / removal / repair of damaged/ broken parts or member of Sofa Set 3 seater or 1 seater or 2 seater as mentioned below where required and provision of replacement of the same member or material and fixing it including removing of unserviceable tapestry, string dori, cushions, foam or padding, etc, applying filler or putty in the minor cracks, and atleast two coats of polishing with French polish to the whole repaired sofa ( Qty of each polished item will be measured and paid separately) as per procedure mentioned in the particular specification after proper cleaning and preparation of the surface and proper dyeing to match with existing surface etc and also including shifting, transporting and stacking of furniture and equipment at the site and furniture store or yard alike by the contractors' own arrangement and cost. All as directed by Engr-in-charge. All as mentioned above as applicable but for S&F Arm of sofa set 3 seater or 1 seater or 2 seater made out of IInd class seasoned hard wood. (FD-281,FD-373)

All as per items No 131 above as applicable but for Leg of side board made of IInd class hard wood of existing shape and size.

All as per items No 131 above as applicable but for Partition of side board 18mm thick BWR grade HDHMR board with laminate as mentioned above.

REPAIR TO TABLE DRESSING GENTS WITH MIRROR :-All as per items No 26 above but for Table dressing gents with mirror. All as mentioned above as applicable but for Back side of the box of table with 12mm thick BWR grade plywood in one piece. (FD-230,379)

All as per items No 141 above as applicable but for replacement to unserviceable looking mirror with new mirror of 5.5mm thick Make - Atul, Modiguard or Golden fish free from all defects with complete teak wood edging enclosed all as directed.

All as per items No 141 above as applicable but for Back made of 18 mm thick Prelaminated HDHMR board BWR as per existing size / shape or as per drawing with teak wood edging all around.

All as per items No 144 above as applicable but for Keyboard Rack made of 18mm thick exterior grade prelaminated HDHMR Board as per existing item including SS/ Alumimium telescopic channel premium quality as required all as directed and specified.

All as per items No 144 above as applicable but for

Shelf / rack for CPU / other computer components as per existing size / shape or as per drawing made of 18mm thick exterior grade prelaminated HDHMR Board as per existing item

LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE COMPUTER: All as per item no. 09 as applicable but for Table computer.

REPAIR TO TABLE DRESSING LADIES WITH MIRROR:- All as per items No 26 above but for Table dressing ladies with mirror. All as mentioned above as applicable but for Top of the table dressing ladies with 18mm thick prelaminated HDHMR board BWR type teak veneered face on top and other side commercial. (FD-251,378)

All as per items No 144 above as applicable but for Rubber / Plastic premium quality Shoes fitted to the bottom of the frame / side / leg of the table.

All as per items No 144 above as applicable but for Side of table computer made of 18mm thick exterior grade prelaminated particle board / MDF Board / Block Board

All as per items No 143 above as applicable but for M&L for two coats of Painting with synthetic enamel paint of colour as directed after scraping and surface preparation and one coat of red oxide primer on metallic frame parts and two coats of Polishing after surface prepeartion with premium quality french polish on wooden parts.

All as per items No 151 above as applicable but for rear leg (left or right)

All as per items No 151 above as applicable but for Front/Rear/Side members of seat.

LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF CHAIR DINING CUSHIONED: All as per item no. 09 as applicable but for Chair dining cushioned.

REPAIR TO BOOK CASE SMALL WOODEN :- All as per items No 26 above but for book case wooden. All as mentioned above as applicable but for top, side and bottom members for book case made of 19 mm thick BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item. (FD-237/355)

REPAIR TO BED PLY WOOD TOP:- All as per items No 26 above but for bed plywood top. All as mentioned above as applicable but for Removing of old unserviceable back rest of bed and S&F new back rest as per existing size and shape of IInd class hard wood incl polishing (two or more coats) over a coat of wood filler after preparation of surfa

REPAIR TO TABLE DINING 6/8 PERSONS :- All as per items No 26 above but for Table dining 6 or 8 seater. All as mentioned above as applicable but for Top of table dining 6 seater of size 1500mm x 900mm or as per drg as per drg or existing table, made of 18mm thick BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item. (FD-273)

REPAIR TO SIDE BOARD :- All as per items No 26 above but for Side Board. All as mentioned above as applicable but for Doors Double leaf made of 18mm thick BWR grade HDHMR board as per existing item or as directed, make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item. including replacement of butt hinges, knobs and hasp & stapple complete. (FD-241,371 &372)

REPAIR TO HAT STAND WITH MIRROR:-All as per items No 26 above but for Side Board. All as mentioned above as applicable but for removing u/s brass or CP hooks in vintage design and supply & fixing Brass or CP hook in vintage design as per approved and specified design, shape, size and installing them on the repaired hat stand with mirror all as directed by engr-in-charge.(FD-23,206,230,233,362,361,1110)

REPAIR TO COMPUTER TABLE: All as per items No 26 above but for Table computer MAP / TP. All as mentioned above as applicable but for Top of 18mm thick exterior grade prelaminated HDHMR Board as per existing item with one side melamine face and balancing white on other side ISI marked with Ist class HW teak wood beading 4mm thick polishing with french polish (two or more coats) over a coat of wood filler / or PVC Edging duly fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete etc. all as directed and specified by engr-in-charge.(FD/E6/MAP03, TP)

REPAIR TO CHAIR DINING CUSHIONED :- All as per items No 01 above but for Chair dining cushioned. All as mentioned above as applicable but for S&F front leg (left or right ) made out with IInd class seasoned hard wood of size and shape as per existing chair or as per Drg all as directed by Engineer-in-Charge. (FD/MAP-11/ 04)

Material & Labour for preparation of old wooden surfaces and atleast two coats of polishing with French polish to the whole item as per procedure mentioned in the particular specification after proper cleaning and preparation of the surface and proper dyeing if required and directed alongwith anti termite and anti borer treatement to all the wooden parts of the item, etc complete. To be noted: Qty considered below also include qty of items which are polished with french polish which is to be measured and paid separately for item no 1 to 155. All as mentioned above for Bed with ply wood top(FD-21,213,246)

All as per item no 157 above but for Chair writing/CBA (FD--202,280)

All as per item no 157 above but for Chair Easy (FD-229,1108)

All as per item no 157 above but for Chair dining (FD-209,279,203)

All as per item no 157 above but for Sofa chair single seater (FD-281,373)

All as per item no 157 above but for Sofa set two seater (FD-281,373)

All as per item no 157 above but for Sofa set three seater (FD-281,373)

All as per item no 157 above but for Table 3'x2' with & without drawer (FD-284,283)

All as per item no 157 above but for Table writing (FD-249,275)

All as per item no 157 above but for Table dressing gents with mirror (FD-31,230,379)

All as per item no 157 above but for Table dressing ladies with mirror (FD-32,251,378)

All as per item no 157 above but for Table centre with Sunmica Top / Glass Top (FD-235,274,393)

All as per item no 157 above but for Table bed side (FD-210,248,276)

All as per items No 151 above as applicable but for Stiffners.

All as per items No 151 above as applicable but for replacement of rubber / plastic shoe of superior quality with steel plated screws of suitable size complete.

All as per items No 151 above as applicable but for Removing of existing U/S cushion from bottom seat of chair dining officers and S&F new HR foam cushion Make-Sleepwell/Godrej/ Kurlon, 75 mm thick 40 density duly covered with superior quality tapestry material ( Leatherette or velvet cloth as specified and approved) (Not less than Rs 300/Mtr) on top and cotton lining cloth on bottom of seat respectively including replacement of seat made of 12mm thick ply if required.

All as per items No 178 above as applicable but for replacement of unserviceable locks for Almirah Med / Small steel.

All as per items No 178 above as applicable but for removing of unserviceable legs and providing new legs made out of 20 guage / 1mm thick MS CRCA sheet similar to existing shape, design & size & welding properly to almirah steel large with shelves / 1/2 H x 1/2 S as directed as per drg duly painted with two coats of synthetic enamel paint Olive green/ Smoke Gray or same as of existing colour as of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed by engr-in-charge, over a coat of red oxide primer by means of spray painting. All as directed by engr-in-charge.

All as per items No 178 above as applicable but for almirah med steel.

All as per items No 178 above as applicable but for repairing and fixing of shelves by making good of dents and removal of scratches etc and fixing to the almirah body by providing new clamps in qty 4 or as required or by welding for each shelf as per existing design or directed to adjusting / fixing the shelves.

All as per items No 178 above as applicable but for removing of unserviceable shelves and providing and fixing the new shelves as per existing size and design made of 22 gauge MS CRCA sheet by riveting / clamps/ welding as per existing design and as directed by engr-in-charge.

All as per items No 178 above as applicable but for removing of unserviceable broken handles & providing new steel handle chromium plated similar to existing shape, size & design to almirah large/med steel with shelves / 1/2H x 1/2S & fix suitably as directed.

All as per items No 178 above as applicable but for removing of unserviceable 3 way locking mechanism / device alongwith rods & clamps for top and bottom locking of doors and providing new 3 way locking mechanism / device with rod of 10mm dia MS bar made to existing shape, size and design including cover for lock and clamping as required for almirah large steel complete all as specified and directed by engr-in-charge.

All as per items No 185 above as applicable but for almirah med steel.

All as per items No 178 above as applicable but for Spray painting to both external & internal surfaces of almirah large steel with shelves / 1/2H x 1/2S with one coat of red oxide primer and after it, two coats of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed (where extensive paintwork to surface is required).

LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF ALMIRAH STEEL: Labour & Material for comprehensive repair including petty repair and fitment/ Denting/ Straightening of body or part and alignment of Door etc ( where no replacement of damaged part is required) of Almirah Large / small/ med steel with shelves / 1/2 H x 1/2S or any part thereof as required including repair/ fixing of hinges with welding , etc all as specified and directed by engr-in-charge.

All as per item no 157 above but for Teapoy (FD-232,278,382)

All as per items No 187 above as applicable but for almirah med steel

All as per items No 178 above as applicable but for painting either by spray painting or by brush as required according to environment and conditions to external or internal surfaces or both as directed of almirah large steel with shelves / 1/2H x 1/2S ( This item is for items where surface of almirah does not require extensive paint work or needs light or petty touchup etc) with one coat of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed.

All as per items No 189 above as applicable but for almirah med steel

All as per items No 192 above as applicable but for removing of unserviceable legs and providing new legs made out of 1mm thick MS CRCA MS sheet similar to existing shape, design & size & welding properly to bed side locker steel as directed as per drg duly painted with two coats of synthetic enamel / hammertone paint in Olive green/ Smoke Gray or same as of existing colour as approved and directed by engr-in-charge, over a coat of red oxide primer by means of spray painting.

All as per items No 192 above as applicable but for Repairing of shelves by providing new clamps or by welding as per existing design or directed to adjusting / fixing the shelves.

All as per items No 290 above as applicable but for replacement of soft closing premium quality heavy duty telescopic channel SS of existing size and of best quality of make Ebco / Hettich or equivalent as approved by engr-in-charge.

All as per item no 157 above but for Table Peg (FD-236,277,384)

All as per items No 192 above as applicable but for Removing of unserviceable shelves and providing and fixing the shelves by riveting / clamps/ welding as per existing design and as directed by engr-in-charge

All as per items No 192 above as applicable but for Spray painting to both external & internal surfaces of bedside locker steel with one coat of red oxide primer and after it, two coats of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed (where extensive paintwork to surface is required).

All as per items No 192 above as applicable but for painting either by spray painting or by brush as required according to environment and conditions to external or internal surfaces or both as directed of bedside locker steel ( This item is for items where surface of almirah does not require extensive paint work or needs light or petty touchup etc) with one coat of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed.

All as per items No 199 above as applicable but for M&L for scrubbing, derusting and applying two coat of synthetic Black enamel paint (spray painting) incl preparation of surface all as directed by Engr - In - charge for Bed hard steel.

All as per items No 290 above as applicable but for replacement of side of table bed side made of 18mm thick BWR grade HDHMR Board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.

All as per item no 157 above but for Book case small (FD-45,355,957)

All as per items No 199 above as applicable but for Removing of unserviceable prelaminated PB / MDF / HDHMR 18 mm thick of head board of bed hard steel and supply and fixing 18mm thick prelaminated HDHMR Make:- Greenply/ Archid Ply/ Century Ply or equivalent all as per specified and as direction by Engr-in-charge.

All as per items No 196 above as applicable but for Removing of uns

erviceable prelaminated particle board 18 mm thick of foot board of bed hard steel and supply and fixing 18mm thick prelaminated HDHMR exterior grade of make Greenply/ Archid Ply/ Century Ply or equivalent as approved ISI Marked all as per specified and as direction by Engr-in-charge.

All as per items No 199 above as applicable but for S&F in repair rubber shoe black for 38mm Square pipe suitable for legs of Bed hard Steel.

All as per items No 205 above as applicable but for Taking out unserviceable locks and S&F new brass lever 4/6 lever lock of make: harrisson/ Link/ godrej/ hettich /Ebco or equivalent make duly approved by engr-in-charge with stainless steel keys in triplicate all as specified and directed.

All as per items No 290 above as applicable but for Replacement of rubber shoes with S & F new rubber shoe of superior quality of suitable size complete all as directed by Engr-in-Charge.

All as per item no 157 above but for Table dining 6 Pers (FD-273,371,1115)

All as per items No 205 above as applicable but for Opening of shelves and cleats and denting of de-shaped portion / welding as required and refixing in same position as directed by engr-in-charge

All as per items No 205 above as applicable but for Removing of unserviceable/broken glass and S&F new glass 3 mm thick of existing shape and size or as shown on drawing and directed by Engr-in-Charge. Make: Modiguard/Atul/Swastik or equivalent duly approved by engr-in-charge.

All as per items No 205 above as applicable but for Spray painting to both external & internal surfaces of Book case steel with one coat of red oxide primer and after it, two coats of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed (where extensive paintwork to surface is required).

All as per items No 205 above as applicable but for painting either by spray painting or by brush as required according to environment and conditions to external or internal surfaces or both as directed of Book case steel ( This item is for items where surface of almirah does not require extensive paint work or needs light or petty touchup etc) with one coat of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed.

All as per items No 212 above as applicable but for Chair leg wheel made of plastic ( first quality / not recycled) as approved by Engr-in-charge

All as per items No 212 above as applicable but for Side handle as per existing shape, size & design and as directed.

All as per items No 212 above as applicable but for replacement of unserviceable plywood chair seat with supply and fixing of moulded / formed plywood chair seat made of BWR type plywood.

All as per items No 212 above as applicable but for replacement of unserviceable plywood chair back with supply and fixing of moulded / formed plywood chair back L shaped made of BWR type plywood.

All as per items No 212 above as applicable but for Removal of U/S Foam seat bottom & back complete and S&F new Foam make Sleepwell / Kurlon / Godrej or equivalent as approved by Engr-in-charge including removing and fixing of PVC edging all around as per existing shape, size and design as required.

All as per items No 212 above as applicable but for Removal of U/S Cushion upholstery material and supply & fixing of superior tapestry upholstery material cloth in colour and pattern as approved for Seat back & bottom both (rate not less than Rs 250/Mtr) as approved by engr-in-charge as per existing shape, size & Design as directed including removing and fixing of PVC edging all around as per existing shape, size and design as required.

All as per item no 157 above but for Tabel dining 8 Pers (FD-273,376,1115)

All as per items No 212 above as applicable but for Removal of U/S Cushion upholstery material and supply & fixing of premium leatherette upholstery material in colour and pattern as approved for Seat back & bottom both (rate not less than Rs 350/Mtr) as approved by engr-in-charge as per existing shape, size & design as directed including removing and fixing of PVC edging all around as per existing shape, size and design as required.

All as per items No 212 above as applicable but premium quality Wheel Base made of plastic ( first quality / not recycled) with complete set

All as per items No 212 above as applicable but for Iron Base plate with complete set

LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF CHAIR REVOLVING: All as per items No 191 above as applicable but for Labour and material for comprehensive repair including petty repair and fitment (where no replacement of damaged part is required) of chair revolving.

All as per items No 223 above as applicable but for removal of U/S Foam seat back complete and S&F new Foam make Sleepwell / Kurlon / Godrej or equivalent as approved by Engr-in-charge.

All as per items No 223 above as applicable but for Removal of U/S Cushion upholstery material and supply & fixing of superior tapestry cloth in colour and pattern as approved for Seat back & bottom both (rate not less than Rs 250/Mtr) as approved by engr-in-charge as per existing shape, size & Design as directed including removing and fixing of PVC edging all around as per existing shape, size and design as required.

All as per items No 223 above as applicable but for Removal of U/S Cushion upholstery material and supply & fixing of superior tapestry cloth / premium leatherite cloth in colour and pattern as approved for Seat back & bottom both (rate not less than Rs 250/Mtr) as approved by engr-in-charge as per existing shape, size & Design as directed including removing and fixing of PVC edging all around as per existing shape, size and design as required.

All as per items No 223 above as applicable but for replacement of unserviceable plywood chair seat with supply and fixing of moulded / formed plywood chair seat made of BWR type plywood.

All as per item no 157 above but for Hat Stand Mirror Large /Small (FD-361,1115)

All as per item no 157 above but for Chair dining cushioned (FD/MAP-11/04)

All as per items No 223 above as applicable but for replacement of unserviceable plywood chair back with supply and fixing of moulded / formed plywood chair back L shaped made of BWR type plywood.

LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE BED SIDE MAP: All as per items No 272 above as applicable but for Table Bed Side MAP.

PART 'B' : MAINT OF STEEL FURNITURE REPAIR TO ALMIRAH STEEL LARGE/MED WITH SHELVES/ 1/2 H x 1/2S Labour & Material for repair / maint of almirah steel large/medium with shelves/ 1/2H x 1/2S by replacing / repair to the damaged, dented, broken or unserviceable part of the almirah as appended below complete all as specified and directed including supply of materials and labours including transporting , shifting , handling of furniture and equipment at the site and yard as required, by contractors' own arrangement as directed and specified by engr-in-charge. Removing of unserviceable locks and providing new locks of existing size and design such as 50 mm, Brass Lever 6 levers ISI marked Make: Harrisson Locks / Link Locks/ Godrej Locks/ Hettich / ebco or equivalent make duly approved by engr-in-charge with stainless steel keys in triplicate for Almirah large steel with shelves/ 1/2H x 1/2S and fixing including aligning and fitting them with existing 3 way locking system by riveting/ screw/ welding as required and directed by engr-in-charge. (FD-67(M), FD-243,FD-1031,1032,FD/E6/MAP/18)

All as per items No 223 above as applicable but for Supply and Fixing of rubber shoes of premium quality as per existing shape, size & design for the chair non revolving visitor as directed and specified by engr-in-charge.

All as per items No 223 above as applicable but for M&L for scrubbing and derusting, denting / repairing of de-shaped portion of frame and metal strips and applying one coat of primer and over it two coat of synthetic enamel paint of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed (by spray painting) of approved colour incl preparation of surface all as directed by engr-in-charge.

LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF CHAIR VISITOR: All as per items No 191 above as applicable but for Labour and material for comprehensive repair including petty repair and fitment ( where no replacement of damaged part is required) of chair visitor.

All as per items No 232 above as applicable but for S & F PVC rubber Shoe/Toe of best quality after removing the old un- serviceable shoes all as specified and directed.

All as per items No 236 above as applicable but for Painting of MS members of chair tubular steel with and without arms with two coat of synthetic enamel paint of olive green/ smoke gray or colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed by engr-in-charge after duly preparation of steel surface all as specified and directed.

All as per items No 236 above as applicable but for Taking out unserviceable seats from steel chair with & w/o Arms and S&F IInd class hard wood seat of existing size & shape and fixed with suitable bolts, nuts and washer including polishing, painting and recanning with polythene white cane half rou

nd of premium virgin quality as approved by engr-in-charge as per IS-5378 -1968 2mm wide and 0.3mm thick for seats & 4mm wide & 0.4mm thick for bordering including supply of cane and labour of canning complete all as directed by engr-in-charge.

All as per items No 236 above as applicable but for steel chair back.

REPAIR TO BEDSIDE LOCKER STEEL: Labour & Material for repair / maint of bedside locker steel by replacing / repair to the damaged, dented, broken or unserviceable part of the bedside locker steel as appended below complete all as specified and directed including supply of materials and labours including transporting , shifting , handling of furniture and equipment at the site and yard as required, by contractors' own arrangement as directed and specified by engr-in-charge. Removing of unserviceable Hasp & Staple and providing new Hasp & Steel of existing shape & size as approved by engr-in-charge and fixing by riveting/ screw as required and directed by engr-in-charge. (FD-127,257,1029)

Removing of unserviceable elbow of charpoy GI pipe and S & F three way GI elbow 32mm medium grade ISI marked complete all as specified and directed by Engr-in-charge.

Removing of unserviceable check nut of GI Charpoy and s&f new check nut 32mm bore 10mm thick suitable for charpoi GI pipe 32mm bore complete all as specified & directed.

All as per items No 232 above as applicable but for Removing and replacing unserviceable seat back & seat bottom PVC moulded by fitting with new PVC moulded seat back & seat bottom of chair verandah including two coat of Synthetic Enamel paint White /approved colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed to complete frame of chair after derusting and surface preparation including shaping / repairing the deshaped portion of the frame of chair all as specified and shown on Drg No -. FD/MAP-II/06, Make of the PVC Seat & Back - AMKO, Classic or Equivalent as approved by Engr-in-charge. ( Note :- Both Seat back & Seat bottom of the chair verandah shall be replaced to form 1 unit for the purpose of payment to the contractor.)

All as per item No 1 above but for Removal of u/s cane and supply and re-canning of chair writing/CBA with 2mm wide half round virgin premium white or approved colour plastic cane of approved make and quality except the border which shall be 3mm flat swide half round virgin premium white or approved colour plastic cane of approved make and quality and weaving must be in accordance to Godrej Pattern as shown on drawing FD-03(M)Sheet 1/1, all as specified and directed by engr-in-charge.

Taking out existing old broken legs from chairpoy GI 32mm dia and providing 01 Nos new legs in position made out of old broken long rail/ short rail obtained from taking down above item No 27 (d) & 27(e) and S & F 3mm thick and 40 mm dia MS plate welded at bottom of leg and two Nos MS clamp made out of 25x3mm size FI welded legs including threading on top and painting of clamp with two coat of synthetic enamel paint over a coat of oxide primer and complete all as specified and directed by engineer-in-Charge.

LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF CHAIR EASY: All as per item no. 09 as applicable but for Chair Easy complete all as per specified and directed.

LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF BEDSIDE LOCKER STEEL: All as per items No 191 above as applicable but for Bedside Locker steel.

Removing of U/S Flat Iron and providing and fixing of new flat iron strip of size 900x32x5mm by welding to the Long rail as shown in the drawing all as specified and directed by engr-in-charge.

Removing of unserviceable Plywood and supply and fixing 12mm thick ply wood commercial BWR plywood ISI marked Make: KitPly/ Century/ Archid Ply or equivalent as approved by engr-in-charge and fixing same with bolts nuts and washers, bolts of size 5x65mm 12 nos round countersunk head bolts complete all as directed including tightening of loose frame/fixing of loose charpoy GI pipe component to make the frame fit for fixing complete all including labour for handling, shifting of furniture and equipement on site as well as on yard by contractor's own arrangement as specified and as per direction by Engr-in-charge.

Removing of unserviceable Plywood and supply and fixing 12 mm thick ply wood commercial BWR HDHMR ISI marked Make: Geenply/ Archid Ply/ Century Ply or equivalent as approved by engr-in-charge and fixing same with bolts nuts and washers, bolts of size 5x35 mm 16 nos round countersunk head bolts complete all as directed including tightening of loose frame/fixing / repairing of charpoy GI pipe folding's component by riveting/ screwing / welding as required to make the frame fit for fixing complete all including labour for handling, shifting of furniture and equipement on site as well as on yard by contractor's own arrangement as specified and as per direction by Engr-in-charge.

M&L for scrubbing, derusting and applying two coat of synthetic Olive green / silver gray or approved colour enamel paint of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed by engr-in-charge (by spray painting) incl preparation of surface by derusting , scraping and straigtening bent part part of metal frame including handling, shifting of furniture and equipement on site as well as on yard by contractor's own arrangement all as directed by Engr - In - charge for charpoy folding IP Ply Top.

REPAIR TO BED HARD STEEL( MAP): Labour & Material for repair / maint of bed hard steel ( MAP) by replacing / repair to the damaged, dented, broken or unserviceable part of thebed hard steel ( MAP) as appended below complete all as specified and directed including supply of materials and labours including transporting , shifting , handling of furniture and equipment at the site and yard as required, by contractors' own arrangement as directed and specified by engr-in-charge. Removing of unserviceable plywood 12 mm thick and supply and fixing 12mm thick ply wood commercial BWR plywood ISI marked Make: Greenply/ Archid Ply/ Century Ply or equivalent as approved by engr-in-charge complete all as per specified and as direction by Engr-in-charge. (FD/E6/MAP/08(R))

LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF BED HARD STEEL( MAP): All as per items No 191 above as applicable but for Bed Hard Steel MAP.

All as per items No 236 above as applicable but for Taking out repairable seats from steel chair with & w/o Arms and fixing back the existing seat after recanning with polyethelyne white cane half round of premium virgin quality as approved by engr-in-charge as per IS-5378 -1968 2mm wide and 0.3mm thick for seats & 4mm wide & 0.4mm thick for bordering including supply of cane and labour of canning complete all as directed by engr-in-charge.

All as per items No 236 above as applicable but for steel chair back -do-

All as per items No 236 above as applicable but for Taking out US arms rest from steel chair with arms and supply and fixing chair arms rest with suitable bolts, nuts and washer

LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF BOOK CASE STEEL: All as per items No 191 above as applicable but for book case steel.

REPAIR TO BOOK CASE STEEL: Labour & Material for repair / maint of bedside locker steel by replacing / repair to the damaged, dented, broken or unserviceable part of the bedside locker steel as appended below complete all as specified and directed including supply of materials and labours including transporting , shifting , handling of

All as per items No 236 above as applicable but for S&F in repair hard rubber shoe black 20mm dia suitable for bottom of steel chair with suitable size of steel screw

All as per items No 236 above as applicable but for S&F in repair hard rubber cap black suitable for 20mm dia at top of steel chair complete.

All as per items No 257 above as applicable but replacement of legs made of 16 gauge MS CRCA rectangular section pipe 25mm x 65mm

All as per items No 257 above as applicable but replacement of short rails made of 16 gauge MS CRCA rectangular section pipe 25mm x 65mm

Ditto all as per items No 263 above as applicable but for removing of unserviceable handle of drawer as per existing shape and size and supply & fixing new handle of drawer as per existing shape and size with key in triplicate as specified in drg

Ditto all as per items No 263 above as applicable but for Spray painting to both inside & outside of whole body incl drawer & legs of Table office officer steel with two coat of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed by engr-in-charge including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed.

All as per items No 257 above as applicable but replacement of long rails made of 16 gauge MS CRCA rectangular section pipe 25mm x 65mm

All as per items No 263 above as applicable but for table office officers (1680mm x 870mm)

LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE OFFICE STEEL: Labour & Material for comprehensive repair including petty repair and fitment (where no replacement of damaged part is required) of Table office steel including supply of materials and labours including transporting , shifting , handling of furniture and equipment at the site and yard as required, by contractors' own arrangement as directed and specified by engr-in-charge.

furniture and equipment at the site and yard as required, by contractors' own arrangement as directed and specified by engr-in-charge. Taking out unserviceable handle and S&F of new chromium plated Steel handle of same size, size & design as existing as directed by Engr-in-Charge (FD-90,FD-1028)

All as per items No 263 above as applicable but for table office clerk steel (1200mmx900mm)

All as per items No 263 above as applicable but for gas welding to all broken joints / defects of table office officer/clerk metal structure.

All as per items No 263 above as applicable but for Repairing to the drawers of table office officers /clerk steel, making good dents, proper alignment for smooth function of drawers including for removing of unserviceable locks of drawer as per existing shape and size and supply & fixing new 6 brass lever locks as per existing shape and size with key in triplicate as specified in drg

All as per items No 269 above as applicable but for table office clerk steel

REPAIR TO CHAIR REVOLVING/ COMPUTER/EXECUTIVE GODREJ PATTERN : Dismantling and re-assembling with new components of the following unserviceable part/components of chair revolving steel alongwith providing of material and labour including fitment, repair, shifting and stacking of chairs at the site all as specified and directed by Engr-in-charge of the following :- Hydraulic system complete set as approved by Engr-in-charge (TP)

All as per items No 263 above as applicable but for S &F of rubber shoe with new rubber shoe of superior quality with suitable size complete all as directed by Engr-in-Charge.

All as per items No 273 above as applicable but for Gas welding to all broken joints of table Steel 900mm x900mm x760mm including Cutting of worn out/broken legs of table steel and replace with new square MS pipe 1.6mm thick and supporting members as per and fixing with gas welding complete

All as per items No 273 above as applicable but for S &F of rubber shoe with new rubber shoe of superior quality with suitable size complete all as directed by Engr-in-Charge.

All as per items No 273 above as applicable but for Spray painting to both inside & outside of whole body of Table steel 900 mm x 900 mm x 760 mm with two coat of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed by engr-in-charge including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed.

Ditto all as per items No 278 above as applicable but for Spray painting to both inside & outside of whole body of Table steel 900 mm x 600 mm x 760 mm with two coat of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed by engr-in-charge including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed.

LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE STEEL 900 MM x 900 MM x 760 MM: All as per items No 272 above as applicable but for Table steel 900 mm x 900 mm x 750 mm.

All as per items No 278 above as applicable but for Gas welding to all broken joints of table 900mm x600mm x760mm with drawer/ without drawer Steel including Cutting of worn out/broken legs of table steel and replace with new square MS pipe 1.6mm thick and supporting members as per and fixing with gas welding complete

REPAIR TO CHAIR NON REVOLVING CUSHIONED /VISITOR / CHAIR WRITING (MAP): Dismantling and re-assembling with new components of the following unserviceable part / components of chair visitor alongwith providing of material and labour including fitment, repair, shifting and stacking of chairs at the site all as specified and directed by engr-in-charge of the following :- Removal of U/S Foam seat bottom complete and S&F new Foam make Sleepwell / Kurlon / Godrej or equivalent as approved by Engr-in-charge. (TP, FD/E6/MAP/12)

All as per items No 278 above as applicable but for Repairs to the drawer of table steel making good dents, proper alignment for smooth function of drawer.

All as per items No 278 above as applicable but for removing of unserviceable locks of drawer as per existing shape and size and supply & fixing new 6 brass lever locks as per existing shape and size with key in triplicate as specified in drg

All as per items No 278 above as applicable but for removing of unserviceable handle of drawer as per existing shape and size and supply & fixing new handle of drawer as per existing shape and size with key in triplicate as specified in drg

REPAIR TO CHAIR VARANDAH CANNED / PVC SEAT & BACK (MAP) Dismantling and re-assembling with new components of the following unserviceable part/components of chair varandah steel alongwith providing of material and labour including fitment, repair, shifting and stacking of chairs at the site all as specified and directed by EIC of the following: Comprehensive repairs to broken mild steel components of chair varandah with gas welding, including replacing broken/ worn out legs with new 20mm dia MS pipe 1.6mm thick 75mm to100mm long for each chair. (FD-19,256,259,359,FD/MAP-II/06, FD/MAP)

All as per items No 278 above as applicable but for S &F in repair /replacement of rubber shoe of superior quality with suitable size complete all as directed and specified in drg.

LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE STEEL 900 MM x 600 MM x 760 MM: All as per items No 272 above as applicable but for Table steel 900 mm x 600 mm x 760 mm.

All as per items No 286 above as applicable but for Spray painting to both inside & outside of whole body of teapoy varandah with two coat of synthetic enamel / hammertone paint in white / black or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Gloss or equivalent as approved and directed by engr-in-charge including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed.

All as per items No 286 above as applicable but for Dismantling of unserviceable top of Teapoy Varandah and providing new top for top of Teapoy Varandah size 900mm x 450mm , made of 18mm thick BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.

LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TEAPOY VARANDAH: All as per items No 272 above as applicable but for Teapoy Varandah.

All as per items No 290 above as applicable but for Gas welding to broken joints of Table Bed side Steel Frame of 18mm square pipe.

All as per items No 290 above as applicable but for replacement of complete Table Bed side CRCA Steel Frame made of 18mm square pipe 18 gauge thickness .

All as per items No 290 above as applicable but for replacement of bottom drawers of table bed side made of 18mm thick BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item inccluding CP handles etc.

All as per items No 290 above as applicable but for replacement of top drawer of table bed side made of 18 mm thick BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and col

All as per items No 232 above as applicable but for Removing of all u/s canes of chair varandah and supply & recanning with premium plastic cane of size 4mm / 6mm half round best quality as per IS-5378-1968 including Two coat of Synthetic Enamel White / approved colour paint of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed to complete frame before canning after derusting and surface preparation including shaping / repairing the deshaped portion of the frame of chair all as specified and shown on Drg. after preparation of steel surfaces. (DRG: II/15)

Derusting, scraping, surface preparation of the metal frame of table centre brass / steel and polishing / buffing / painting as required as per existing drg or as directed by engr-in-charge.

REPAIRS TO CHAIR TUBULAR STEEL WITH OR WITHOUT ARMS: Dismantling and re-assembling with new components of the following unserviceable part / components of chair tubular steel CB alongwith providing of material and labour including fitment, repair, shifting and stacking of chairs at the site all as specified and directed by engr-in-charge of the following: Gas welding to broken members of chair tubular steel with & without arms complete all as per specified and directed. (FD-75(M))

CONVERSION OF GI CHARPOY NYLON NEWAR INTO CHARPOY GI PIPE PLY WOOD TOP AND REPAIR OF CHARPOY GI PIPE PLYTOP AND CHARPOY IP FOLDING HARD TOP Removing of unserviceable nylon newar and supply and fixing 12mm thick ply wood commercial BWR plywood ISI marked Make: Greenply/ Archid Ply/ Century Ply or equivalent as approved by engr-in-charge and fixing same with two nos of flat iron strip of size 900x32x5mm, bolts nuts and washers bolts of size 5x65mm 12 nos round countersunk head bolts after drilling the three holes of each long rail and drilling two hole on each short rail and two hole in flat iron complete all as directed including tightening of loose frame/fixing of loose charpoy GI pipe component to make the frame fit for fixing, alignment of charpoy to the level, chamfering of the edges as required and directed complete including labour for handling, shifting of furniture and equipement on site as well as on yard by contractor's own arrangement all as per specified and as direction by Engr-in-charge. (FD-220,FD-220(R),FD-388(R))

REPAIR TO CHARPOY MS BOX SECTION WITH PLY WOOD TOP :- Removing of unserviceable plywood 12 mm thick and supply and fixing 12mm thick ply wood commercial BWR plywood ISI marked Make: Greenply/ Archid Ply/ Century Ply or equivalent as approved by engr-in-charge complete all as per specified and as direction by Engr-in-charge. (FD-MAP-II/01)

REPAIR TO TABLE OFFICE (OFFICER / CLERK) STEEL: Labour & Material for repair / maint of table office (officer/clerk) steel by replacing / repair to the damaged, dented, broken or unserviceable part of the table office (officer/clerk) steel as appended below complete all as specified and directed including supply of materials and labours including transporting , shifting , handling of furniture and equipment at the site and yard as required, by contractors' own arrangement as directed and specified by engr-in-charge. Dismantling of unserviceable table top and providing new top for table office officer steel (1800mm x1200mm) made of 18mm thick BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item. (FD-84,1004,1003,1005,1006,1002)

REPAIR TO TABLE STEEL 900 X 900 X 760 MM :- All as per items No 263 above as applicable but for Dismantling of unserviceable table top and providing new top for table steel 900 mm x 900 mm x 760 mm made of 18mm thick BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item. (FD-1009)

REPAIR TO TABLE 900MM X 600MM X 760MM WITH DRAWER /WITHOUT DRAWER STEEL All as per items No 263 above as applicable but for Dismantling of unserviceable table top and providing new top for table steel 900 mm x 600 mm x 760 mm made of 18mm thick BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item. (FD-1007,1008)