ADDN/ALTN AT BLDG NO P-25/3, PROVN OF 02 X OPEN PLINTH , PROVN OF 01 X TOILET BLOCK, FLOORANDTILING WKS, CONSTR OF 01 X CENTRAL TOILET BLOCK , ADDN/ALTN TO FALSE CEILING, PROVN OF TOILET CUM BATHROOM INCL ELECT SUPPLY UNDER GE (N) BTD AT BTD MIL STN

Amount

SCHEDULE 'A' B/R Works

Excavation in post holes in soft/loose soil n. exc 0.50 cum each, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25 cm including removing of surplus spoil to a distance n exc 50 mtr and making good the disturbed surfaces all as specified and directed by Engineer-in-Charge.

Surface dressing not exceeding 15cm deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge.

Returning filling in, approved soft/loose soil, including spreading , levelling, watering and well ramming in layers, each layer not exceeding 25cm in soft/loose soil complete all as specified and as directed by Engineer-in-charge.

Removing surplus excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed by Engineer-in-charge.

Excavating over areas, n exc 1.5 m deep in soft/loose soil and getting out complete all as specified and as directed by Engineer-in- charge.

Excavating over areas, exc 1.5 m and n exc 3 m deep in soft/loose soil and getting out complete all as specified and as directed by Engineer-in- charge.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge.

Spreading and levelling in layers n exc. 25 cm thick well ramming including water as required complete all as specified and directed by Engineer-in-Charge.

Material and labour for PCC ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed by Engineer-in-charge.

Material and labour for Hardcore of gauge n exc. 63 mm of Broken stone or boulders , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfacecomplete all as specified and as directed by the Engineer-in-Charge.

Material and labour for PCC (1:2:4), type B-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete, sub base of sewage tank & similar work etc complete all as specified and as directed by Engineer-in-charge.

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge.

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge.

Supply and fixing Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed by EIngneer-in-Charge.

Material and Labour for mild steel work in tubular trusses, tubular/rectangular MS pipe such as vertical post, trusses, rafter, purlins etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed by Engineer-in-charge.

Material and Labour Brick work with sub class ‘B’ burnt clay bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in- charge.

Material and Labour for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces of walls and finishing the surface even & fair faces without using extra cement complete all as specified and as directed by Engineer-in- charge.

Material and labour for preparing newly plastered or concrete surface of wall by sand papering or by any other mean and after preparing the surfaces applying three coats of white wash complete all as specified & directed by Engineer-in- charge

Material and labour for preparing newly plastered or concrete surface of ceiling by sand papering or by any other mean and after preparing the surfaces applying two coats of white wash complete all as specified & directed by Engineer-in- charge

Material and Labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by Engineer-in-charge.

Material and Labour for 75 mm thick PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in plinth protection, surface finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in- charge.

Material and Labour for 50 mm thick PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in plinth protection, surface finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in- charge.

Material and Labour Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 100 mm thick PCC (1:2:4) type B-2 using 40 mm graded stone aggregate as in flooring, surface finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in- charge.

Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each and and removal from site complete all as specified and as directed by Engineer-in-charge.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etccomplete all as specified and as directed by Engineer-in-charge.

Material and Labour for rendering 15 mm thick in cement mortar (1:6) on other than fair face of brick work or concrete surfaces of walls and finishing the surface even & smooth without using extra cement complete all as specified and as directed by Engineer-in- charge.

Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing fair & even mixed with water proofing compound as per manufacturer's instructions but without using extra cement complete all as specified and as directed by Engineer-in-charge. Note :- WPC shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and as directed by Engineer-in-charge.

Material and labour for applying two coats of cement base paint on old plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface of wall with chalk whitining complete all as specified and as directed by Engineer-in-charge.

Supply and fixing aluminium anodised handles, 150 mm long, cast type complete all as specified and as directed by Engineer-in-charge.

Supply and Fixing 150 mm long aluminium anodised, barrel tower bolts extruded section complete all as specified and as directed by Engineer-in-charge.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of priming plastered and other surfaces with alkali resistant priming paint completely all as specified and as directed by Engineer-in-Charge.

Material and labour for Brick work with fly ash old size bricks, straight or curved on plan to any radius in half brick walls built in CM (1:4), etc; complete all as specified and as directed by Engineer-in-charge.

Material and labour for loose filling with broken brick aggregates of gauge 80 to 150 mm in sokage pits, soakage wells complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for 40 mm thick damp proof course in cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregate) to horizontal or vertical surfaces including necessary form work and including mixing of water proofing compound as per manufacturer's instructions complete all as specified and as directed by Engineer-in- charge. (Note :- WPC shall be measured & paid separately as Supply only)

Material and labour for rendering 5 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement including mixing of water proofing compound as per manufacturer's instructions complete all as specified and as directed by Engineer-in- charge. (Note :- WPC shall be measured & paid separately as Supply only)

Material and labour for rendering 5 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

Material and Labour for rendering 10 mm thick in cement mortar (1:3) on brick work or concrete surfaces as in ceiling in two layers other than fair faces finishing the surface even & smooth without using extra cement complete all as specified and as directed by Engineer-in- charge.

Material and labour for preparing newly plastered of ceiling wall by sand papering or by any other mean and after preparing the surfaces applying three coats of white wash complete all as specified & directed by Engineer-in- charge

Material and labour for 75 mm thick cement concrete (1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base of floor, under tiles etc. finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-charge.

Material and labour for Glazed ceramic coloured tiles of size 450 mm X 300 mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor, set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

Supply and fixed ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (polythene float) complete, screwed suitable for 20mm bore iron pipe complete all specified and as directed by Engineer-in-charge. Note :- The minimum weight of ball valve shall be as given in SSR or in relevant IS.

Supply and fixing gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight of gate valve shall be as given in SSR or in relevant IS.

Supply and fixing gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 25mm bore iron pipes complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight of gate valve shall be as given in SSR or in relevant IS.

Supply and fixing in repair chromium plated with long shank and cup ( concealed type) stop valve for 15 mm bore dia of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge.

Supply and fixing chromium plated with long shank and cup ( concealed type) stop valve for 15 mm bore dia of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge.

Supply and fixing stop valve/angle valve cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed both end for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.

Supply and fixing chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore dia of pipe complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relivent IS.

Supply and fixing in low density polythene (LDPE) pipe of pressure rating 6kg/sqcm, 32 mm bore for waste pipe of wash basin etc complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relivent IS.

Supply and fixing PVC connection 15 mm size with brass nuts on both ends and washers length 600 mm complete all as specified and as directed by Engineer-in-charge.

Supply and fixing PVC connection 15 mm size with brass nuts on both ends and washers length 450 mm complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in repair PVC connection 15 mm size with brass nuts on both ends and washers length 600 mm complete all as specified and as directed by Engineer-in-charge.

Supply & fixing vitreous China squatting pan 'Orissa' pattern white of size 580mmx440mm white with integral foot rests, excluding flushing cistern, flush pipe above floor but including PVC (SWR) 'P' trap 100/110mm bore and including setting the trap and pan in lime concrete (1 lime, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, including PVC flush pipe upto finished floor level, joints of flush pipe and trap make leakproof and testing upto entire satisfaction of Engineer-in-charge before filling concrete complete all as specified and as directed by Engineer-in- charge.

Supply and Fixing PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and as directed by Engineer-in- charge.

Supply & fixing in replacement vitreous china urinal, half stall type, white, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, 32 mm dia full threaded PTMT waste coupling and 32mm dia waste pipe and pointing around urinal back in cement mortar,complete all as specified & directed by Engineer-in-charge.

Supply and fixing vitreous china bowl type Urinal, flat back typeof size 465 mm x 355mm x 265mm, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and pointing around urinal back in cement, grating and union for discharge etc. complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed by Engineer-in-charge.

Supply and fixing 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by Engineer-in-charge.

Supply & fixing rotational moulded polyethylene water storage tank white colour of capacity 500 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection and complete all as specified and as directed by Engineer-in-charge.

Supply and fixing vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flushing pipe and flush pipe) complete all as specified and as directed by Engineer-in-charge.

Supply and fixing 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed by Engineer-in-charge.

Supply and fixing 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall with stack clamps and jointing with cement mortar complete all as specified and as directed by Engineer-in-charge.

Supply and Fixing PVC (SWR) Bend (ISI Marked) 110mm bore dia complete all as specified and as directed by Engineer-in- charge.

Supply and Fixing 100 mm bore dia HDPE pipes PN 10 (ISI Marked) for rain water pipes confirming to IS: 1984, pressure rating 205kg/Sq cm including clamp & imbeeded in PCC block including jointing of pipe complete all as specified and as directed by Engineer-in- charge.

Supply and Fixing 110 mm dia PVC (SWR) Pipe Bend and Y radius suitable rain pipes (ISI Marked) complete all as specified and as directed by Engineer-in- charge.

Supply and Fixing 110mm dia PVC (SWR) branch piece (ISI Marked) single equal or unequal complete all as specified and as directed by Engineer-in- charge.

Supply and Fixing 110mm dia PVC (SWR) vent cowl (ISI Marked) scomplete all as specified and as directed by Engineer-in- charge.

Supply and fixing Stack clamps for upto 100 mm dia pipe made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 75 mm dia cast iron soil waste & vent pipe drain pipes in any length with or without ears, with cement joints, fixed to wall complete all as specified and as directed by Engineer-in- charge.

Material and labour for Salt-glazed stoneware gully traps of size 150 mm x150mm, square or round mouthed, type 'S' including squre chromium plated 150 mm dia grating complete all as specified and directed by Engineer-in-Charge.

Material and labour for cast iron floor trap with chromium plated 75 mm dia grating including jointing to waste pipe with cement joints complete all as specified and directed by Engineer-in-Charge.

Material and labour for cast iron floor trap with chromium plated 100 mm dia grating including jointing to waste pipe with run lead joints complete all as specified and directed by Engineer-in-Charge.

Material and labour vitreous china (white) wash basin oval shape, size 550 x 400 mm, incl fixing of waste coupling and waste pipe complete all as specified and directed by Engineer-in-Charge.

Material and labour vitreous china (white) wash basin oval shape, size 450 x 300 mm, incl fixing of waste coupling and waste pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixed solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and as directed by Engineer-in-Charge.

Supply and fixed factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 100mm long mild steel butt hinges medium weight cold rolled complete all as specified & directed by Engineer-in-charge.

Supply and fixing Factory made steel ventilator with top hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including painting the exposed steel surfaces with one shop coat of Zinc-Chromate primer complete all as specified and as directed by Engineer-in-charge.

Supply and fixing 3.0mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each panecomplete all as specified and as directed by Engineer-in-charge.

Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 50 mm complete all as specified and as directed by Engineer-in-charge.

Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm complete all as specified and as directed by Engineer-in-charge.

Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed by Engineer-in-charge.

Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed by Engineer-in-charge.

Supply and fixing Salt-glazed stoneware drain pipes 150mm bore (internal) of grade 'A' laid in trenches and jointed etc. complete all as specified and as directed by Engineer-in-charge.

Material and labour for PCC (1:4:8) type D-2 using 40 mm graded stone aggregates as in concrete bed of (SGSW/RCC) drain pipes of 150 mm bore, laid to required slope including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-charge. Note :- (i) Thickness of concrete bed below the barrel of pipe shall be 10 cm. (ii) Width of concrete bed shall be outer diameter of drain pipes (not of sockets / collar) plus 30cm.

Material and labour for formwork to soffits of suspended slabs such as roof slab, floor slabs, landings and similar work not exc 200 mm thick (horizontal or sloping) for rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-charge.

Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-charge.

Material and Labour for formwork to (rough finished surface of concrete) edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 05cm but not exceeding 10cm wide complete all as specified and as directed by Engineer-in-charge.

Material and Labour RCC Nomial Mix 1:2:4 type B-1 using 20 mm graded stone aggregates in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-charge.

Material and Labour RCC Nomial Mix 1:2:4 type B-1 using 20 mm graded stone aggregates in beams, cantilever, bressumers, lintel over 1.5 m span complete all as specified and as directed by Engineer-in-charge.

Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia including making of rungs, handles etc complete all as specified and as directed by Engineer-in-charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)

All as per above item No. 95.00 here in before but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders etc. complete all as specified and as directed by Engineer-in-charge. .

Material and labour cutting into existing manholes/septic tank for connecting new drain upto 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round to 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished, and reforming benching as required complete all as specified & directed by Engineer-in-charge.

Supply and fixing chromium plated, soap dish holder of approximate size 160 x 160 x 90 mm fixed to wall with rubber plugs complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by Engineer-in- charge.

Material and labour for 100mm thick cement concrete (1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base of floor, under tiles etc. finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-charge.

Material and Labour for machine pressed precast interlocking paver block 60 mm thick with grey cement and no pigment, factory made, any shape and size, conforming to IS 15658-2006, made out of M-35 grade concrete laid over and including 25 mm thick layer of sand cushioning complete all as specified and as directed by Engineer-in- charge. Note: The rate of 25mm thick layer of sand cushioning is included in this item and nothing shall be paid extra on this account.

Material and Labour precast cement concrete type B-1 (1:2:4) using 20 mm graded stone aggregates as in kerb stone set in CM (1:4) including necessary moulds/ form work etc complete all as specified and as directed by Engineer-in- charge.

Material and Labour for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as directed conforming to Fe 410 W Gde E-250 quality 'B'complete all as specified and as directed by Engineer-in-charge.

Material & Labour for 100 mm bore cast iron soil waste and vent pipe (spun cast pipe ) in any length with or without ears, laid in trenches or in floor jointing with cement mortar complete all as specified and as directed by Engineer-in- charge.

Material & Labour for 100 mm bore cast iron soil waste and vent pipe (sand cast pipe ) in any length with or without ears, fixed to wall with stack clamps (interval of 1m) made out of FI 50x5mm and 16mm dia round iron stay including nut bolt and jointing with cement mortar complete all as specified and as directed by Engineer-in- charge.

Material & Labour for 75 mm bore cast iron soil waste and vent pipe (spun cast pipe ) in any length with or without ears, laid in trenches or in floor jointing with cement mortar complete all as specified and as directed by Engineer-in- charge.

Supply & fixing 75mm bore cast iron bends (any radius)/elbo, diminishing pieces or tapers (larger bore measured) with oval access door fixed with cement joints complete all as specified and as directed by Engineer-in- charge.

Supply and fixing 100mm bore cast iron cowl fixed with cement joint in cement mortar (1:2) complete all as specified and as directed by Engineer-in-charge.

Supply and fixing anodised aluminium snap grid frame work of size of grid 605mm x 605mm for false ceiling including necessary notching and prepared holes, the snap grid shall consist of anodised aluminium main tee of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/RM, cross and Intermediate tee of size 23.5mm x 26.4mm x 1.4mm weighing 0.191 Kg/RM. The main and cross tee shall be jointed at junction with steel screws or MS bolts, nuts and washers, the snap grid (main / cross tee sections) shall be supported at ends all along the wall with anodised aluminium angle of size 35mm x25mmx 2mm weighing 0.36 Kg/RM fixed to wall with suitable arrangement and duly suspended with 4mm GI wire hangers (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including providing 12mm thick gypsum board in grid fixed in false ceiling grid made of aluminium as per above specifications complete all as specified and as directed by Engineer-in-charge.

Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removal from site complete all as specified and as directed by Engineer-in-charge.

Demolition of RCC as in roof slabs (other than ground floors), beams, stair case, landing, chajjas, and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and as directed by Engineer-in- charge.

Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description complete all as specified and as directed by Engineer-in-charge.

Material and Labour for preparing newly plastered surfaces of walls by applying 3mm wall care putty on wall surfaces even and smooth and applying two coats of plastic emulsion paint over a coat of primer whitening complete all as specified and as directed by Engineer-in- charge.

Material and Labour for preparing newly plastered surfaces of ceiling by applying 3mm wall care putty on ceiling surfaces even and smooth and applying two coats of plastic emulsion paint over a coat of primer whitening complete all as specified and as directed by Engineer-in- charge.

Material and Labour for preparing newly plastered surfaces of walls by applying 3mm wall care putty on wall surfaces even and smooth and applying two coats of weather exterior emulsion paint over a coat of primer whitening complete all as specified and as directed by Engineer-in- charge.

Supply & fixing, factory made steel window confirming to IS 1038 with side hung shutters including projecting type hinges, with steel handle, steel peg stay, complete, dovetailed welded, with one shop coat of zinc chromate primer with glazing bars including fixing of lugs in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast and making good disturbed area of walls and cills to match the existing surfces by bricks / plastering works and painting work etc complete all as specified & as directed by Engineer-in- charge.

Supply and fixing 3mm thick sheet glass ordinary quality & glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified & directed by Engineer-in- charge.

Supply & fixed galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staples complete all as specified & directed by Engineer-in- charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and as directed by Engineer-in- charge.

Material and labour for vitrified ceramic coloured tiles (light shade) 10 mm thick square or rectangular area of each tile not exceeding 0.36 sqm, as in floor, set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

Material and labour for vitrified ceramic coloured tiles (light shade) 10mm thick square or rectangular area of each tile not exceeding 0.36 sqm, as in skirting, dado etc. set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

Material and labour 18-20mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, plateform/cooking plateform or as directed, including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement (1:2) using marble dust with admiture of pigment to match with shade of granite stone slab including cutting as required including cleaning and extra polishing if required complete all as specified and as directed by Engineer-in-Charge.

Material and labour for moulding the edges half round on exposed side (rounding to edges of stone slabs one edge) of granite/ marble as in kitchen shelf, cooking platform WHB counter, steps and other similar situations etc complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing stainless steel sink without drainage board made out of 1.00mm thick sheet , kitchen or laboratory with plugs, washers, waste pipe including bedding in cement mortar to dwarf wall or fixing cast iron cantilever brackets and connecting union to waste pipe, overall size 495x420mm with bowl size 410x330x160mm including taking down existing chinaware sink complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Prelaminatd particle board 19/20 mm thick, exterior grade,ISI marked as in cupboard shutter/shelves,prelaminated both side with deocrative choice lamination, fixed with screws to timber frame work complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 18/19 mm Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and as directed by Engineer-in-Charge.

Material and labour Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of 2nd class soft wood area exceeding 3 sqcm and not exc 6 sqcm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 30mm Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed by Engineer-in-Charge.

Supply and fixing brass Drawer pulls, 3 screw plate with fixed dished pull; 80 mm to 100mm long complete all as specified and directed by Engineer-in-Charge.

Material and Labour 19-20 mm thick PVC board ( for cubboard and kitchen cabinet) one side with decorative choice lamination & other side balancing white lamination, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing stainless steel Modular kitchen basket accessories cabinets multipurpose utensils drawer basket wired of different sizes complete all as specified and directed by Engineer-in-Charge.

Supply and fixed Vitereous china wash down water closet pan (pedestal pattern) single piece WC with UF soft close seat cover hinges fixing accessories set size 365x655x760mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixed in repair vitereous china wash down water closet pan (pedestal pattern) single piece WC with UF soft close seat cover hinges fixing accessories set size 365x655x760mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixed in repair Vitereous china wash basin wall hung with pedestal and coupling all fittings size 590x490x185 including cutting for pinning in ends of brackets or erecting complete all as specified and directed by Engineer-in-Charge.

Supply and fixed Vitereous china wash basin wall hung with pedestal and coupling all fittings size 590x490x185 including cutting for pinning in ends of brackets or erecting complete all as specified and directed by Engineer-in-Charge.

Supply and fixing brass Chromium plated tublar towel rail 20mm dia 600mm long complete all as specified and as directed by Engineer-in-charge.

Supply and fixing soap dish MS Chromium plated of with chromium plated brass screw complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in repair brass Chromium plated tublar towel rail 20mm dia 600mm long complete all as specified and as directed by Engineer-in-charge.

Supply and fixing cornor glass shelf with brackets complete all as specified and as directed by Engineer-in-charge.

Supply and fixing Chromium plated towel ring complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in repair Chromium plated towel ring complete all as specified and as directed by Engineer-in-charge.

Supply and fixing Chromium plated toilet paper holder complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in repair Chromium plated toilet paper holder complete all as specified and as directed by Engineer-in-charge.

Supply and fixing Chromium plated wall mixer 3-in-1 system with provision for both and over head shower complete with 115 mm long bend pipe connecting legs & wall flange (with out hand & over head shower) complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in repair Chromium plated wall mixer 3-in-1 system with provision for both and over head shower complete with 115 mm long bend pipe connecting legs & wall flange (with out hand & over head shower) complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in repair cast copper alloy Chromium plated fancy type angle cock of 15mm bore complete all as specified and as directed by Engineer-in-charge.

Supply and fixing cast copper alloy Chromium plated fancy type angle cock of 15mm bore complete all as specified and as directed by Engineer-in-charge.

Supply and fixing fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore dia of pipe complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in repair fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore dia of pipe complete all as specified and as directed by Engineer-in-charge.

Supply and fixing health faucet with 8mm dia 1.2 meter long flexible tube & wall hook with NRV (back flow preventer) complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in repair health faucet with 8mm dia 1.2 meter long flexible tube & wall hook with NRV (back flow preventer) complete all as specified and as directed by Engineer-in-charge.

Supply and fixing Chromium plated shower rose 200 x 200 mm with or without swivel joints, any size including fis=xed to steel pipe or union complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in repair Chromium plated shower rose 200 x 200 mm with or without swivel joints, any size including fis=xed to steel pipe or union complete all as specified and as directed by Engineer-in-charge.

Supply and fixing 15mm bore single lever sink mixer with swinging spout on upper side (wall mounted model) with connecting legs & wall flange complete all as specified and as directed by Engineer-in-charge.

Supply and fixing 15 mm bore wash basin mixer fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screw shanks screwed for iron pipe or union complete all as specified and as directed by Engineer-in-charge.

Material and Labour for preparing old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint on wooden surface complete all as specified and as directed by Engineer-in- charge.

Material and labour for Preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified & directed by Engineer-in- charge.

Material and Labour for preparing old painted plastered surfaces of walls/pillars/cornices by brooming down with using brrom/sand papering or by other means and the surfaces smooth by applying 2mm thick wall care putty to make the surface smooth by using sander machine upto entire satisfaction by Engineer-in-Charge and after preparing the surface applying two coats of plastic emulsion paint (finished smooth and glossy) as per approved tint/colour with using paint brush /roller brush complete all as specified and as directed by Engineer-in- charge.

Supply & fixing in repair powder coated aluminium frame for fixed type partition (standard two panel pattern) using aluminium section of size 83x44x2mm thick and 5mm thick amuminium composite panelling in all panel: inserted in and including standard anodised aluminium frame work with including necessary jointing cleats, rubber packing, anodised aluminium snap beading, fixed to floor and walls by means of cadmium plated steel screws complete all as specified and as directed by Engineer-in-Charge. Note :- Weight of aluminium section/aluminium channel shall be physically ascertained through a board of officers convened by Accepting officer and payment shall be made only after the actual weight at site.

Supply & fixing aluminium frame, made out of aluminium section / aluminium chanel, powder coated (minimum thickness of powder coating not less than 50 micron), for doors, windows, ventilators with one or more rebate including jointing cleat for fixing etc. complete all as specified and as directed by Engineer-in-Charge. Note :- Weight of aluminium section/aluminium channel shall be physically ascertained through a board of officers convened by Accepting officer and payment shall be made only after the actual weight at site.

Supply & fixing aluminium door shutter, made out of aluminium section weighing 0.55 Kg/mtr, powder coated (minimum thickness of powder coating not less than 50 micron) including aluminium hardware i.e. necessary joining cleats, glazing clips, rubber neoprene packing, suitable size of aluminium handles 2 Nos and aluminium hinges 04 Nos in each leaf (size of handle and hinge as directed), anodised aluminium snap beading, screws etc including fixing of glass, complete all as specified and directed by Engineer-in-Charge. Note :- (i) Aluminium chowkhat frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass and other filling material in panels shall be measured and paid separately under appropriate item of BOQ as supply only.

Supply & fixing aluminium window/ventilator shutter side hung type without sash bars, made out of aluminium section weighing 0.55 Kg/mtr, powder coated (minimum thickness of powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 No. for ventilator and 3 Nos for window each shutter) suitable handle (1 No.), including fixing of glass, complete all as specified and directed by Engineer-in-Charge. Note :- (i) Aluminium chowkhat frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass and other filling material in panels shall be measured and paid separately under appropriate item of BOQ as supply only.

Supply & fixing and cutting as per size requirement 4mm thick sheet glass ordinary quality in squares/retangular exceeding 0.5sqm in each pane and fixed in any type of doors / windows / ventilators/partition (openable/fixed type) with fixing material complete all as specified & directed by Engineer-in- charge.

Demolition Stone slabs/ marble slabsc and tiles of any description or thickness as in floors, cooking plateform steps, aprons etc Laid dry or bedded and pointed in any mortar complete all as specified and as directed by Engineer-in-Charge.

S & F 5.5mm thick tinted sheet glass ordinary quality/figured glass pin head in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed by Engineer-in-charge.

Supply and fixing Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed by Engineer-in-Charge.

EM SCHUDLE 'A'

Taking down carefully unserviceable copper / aluminum point wiring (light, fan, socket) complete including existing conduit pipes and removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, light fittings etc and removing the retrieved materials from site including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and directed by Engr-in- Charge.

Material and labour for concealed point wiring complete modular type with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through and including PVC rigid conduit 20mm dia( heavy duty) with all fittings and all accessories i.e pipe bend pipe hook, elbow, junction box, pressed steel powder coated sunken box of suitable for mounting modular switches and socket, fan regulator, for light/fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good distrubed surface of wall/ceiling/floors etc by using CM (1:3 ) to matching with existing surface complete all as specified and as directed by Engineer-in-charge.

All as per item No 170.00 here in before but for socket outlet 5 pin 5 Amp on same board complete all as specified and directed.

All as per item No 170.00 here in before but for socket outlet 5 pin 5 Amp on independent board but not below the switch board complete all as specified and directed.

All as per item No 170.00 here in before but for socket outlet 6 pin, 5/15 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth complete all as specified and directed.

Supply and fixing Modular 6 Amps Switch 250 volts AC one way ISI marked.

Supply and fixing Modular 6 Amps Socket 2/3 pin combined 2 module 250 volts AC ISI marked.

Supply and fixing Modular Switch 16 Amps 1 module 250 volts AC ISI marked.

Supply and fixing Modular Socket 16 Amps 2 in one 5 pin universal type 250 volts ISI marked.

S&F switch piano flush type, single pole, one way, 5/6 Amps ISI mark complete all as specified

S&F switch piano flush type, single pole, two way, 5/6 Amps ISI mark complete all as specified

S&F switch piano flush type, single pole, one way, 15/16 Amps ISI mark complete all as specified

S&F Socket outlet multipurpose , 2 in 1, 5 pin, 5/6 Amps, flush type complete all as specified

S&F Socket outlet multipurpose, 2 in 1, 5 pin, 15/16 Amps, flush type complete all as specified

Supply and fixing ceiling rose 3 plate flush type 6 Amp 250V AC topline series with polycarbonate 20 X 50 mm two to three terminal complete all as specified.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminateed sheet etc as required.

S&F Lamp holder PVC/polycarbonate type with back plate suitable for batten .

S&F Lamp holder PVC/polycarbonate type with back plate suitable for batten with LED bulb 9W.

M& L Self ballast LED retrofit Lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K Complete all as directed.

S & F wall mounted LED fitting 1 x 20 watt,6000k, 4 ft complete with retro LED tube and batten, environment friendly , energy efficient complete with all fittings connections all as specified and directed.

supply and fixing in replacement of LED lights fitting 1 x 20 W, 220V, AC decorative box type with driver, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose

M & L for LED Mirror light fitting of 9/10 watt, 6000 K , lineer & compact with decorative grey end caps,polycarbonate body and ribbed opal diffuser complete with lamp and all other accessories fitting arrangement including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector all as specified and directed.

S &F New generation energy saving & environmental friendly long life versatile pressure die -cast aluminium IP 66 roadway luminaire with high power LED of 25/35 watt with toughened glass complete with GI bracket (01 No ) MS clamps (023 Nos ) suitable for security light fitting fixing to wall/column & electrical connection to the light fitting providing 1.5 mtr long twin core round copper conductor cable of suitable size and testing complete all as specified and directed.

S & F new generation energy saving, wall mounted LED tube light fittings, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 20 watt LED duly fitted on PVC square block 6500K (4' ft long) with LED rod 20 watt, 230 volts 50Hz.

Supply and fixing of exhaust fan steel body 450 mm sweep (BEE, 5 star rated) with louvres, 230V, single phase AC supply, hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface as per existing surfaces, and connection to fan with suitable flexible twin core round copper wire complete all as specified and directed by Engineer-in-Charge. Make - Usha / Bajaj / Khaitan / Orient / Crompton / Polar Note :- (i) Srl Number of exhaust fan and 'GE North BTD' shall also be writing on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Exhaust fan installed/hanging at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account

Supply and fixing of exhaust fan steel body 300 mm sweep (BEE, 5 star rated) with louvres, 230V, single phase AC supply, hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface as per existing surfaces, and connection to fan with suitable flexible twin core round copper wire complete all as specified and directed by Engineer-in-Charge. Make - Usha / Bajaj / Khaitan / Orient / Crompton / Polar Note :- (i) Srl Number of exhaust fan and 'GE North BTD' shall also be writing on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Exhaust fan installed/hanging at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account

Supply and fixing in provision of BLDC (Brushless direct current motor) ceiling fan 5 star rated, complete with blades, down rods, and accessories, 230 Volts, 1400mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, including electrical connection providing twin core round copper conductor cable of suitable size, complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Srl Number of ceiling fan and 'GE North BTD' shall also be writing on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Ceiling fan installed/hanging at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account

Supply and fixing of storage type water heater (Geyser) electrical operated 230/240 Volts 25 ltr capacity, BEE 5 star rated complete with all safety equipment and accessories such as safety valve, thermostat, plug top, etc. required for proper functionality & including electric/earth connections complete all as specified and directed by Engineer-in-Charge. Note :- (i) Srl Number of Gyeser and 'GE North BTD' shall also be writing on Gyeser with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Gyeser installed at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account.

Supply and fixing (concealed in wall or as directed) single pole and neutral sheet metal enclosure (Geyser Box) with a two pin and earth plug and socket complete with one single pole MCB of capacity 25 Amps, 240 volts, AC supply complete all as specified and directed by Engineer-in-Charge.

M&L for fixing of 4 Nos rawl plug of suitable size (4"-6") nuts & bolts, grouting work in RCC/Brick wall, cemented works labour charges for cutting to exisiting GI pipe line of size 15 mm dia in position for insertion of tee or branch connection jointing complete with necessary GI fittngs, plumbing work including rawl plug all as per site requirement.

M & L tubing GI "MG" with all fittings laid in floor or trenches including taking out old UNSV pipe of size 15 mm dia complete all as specified and directed

S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed for 15 mm dia of pipe.

S&F PVC connection of size 15 mm dia with PTMT nuts of length 450 mm long (hot series braded, threaded and cold series) complete all as directed by Engr-in-Charge.

S&F Bib tape cast copper alloy with crutch or butterfly handle screwed down fancy type , screwed for iron pipe for brass ferrule of size 15 mm bore.

Labour for cutting to GI pipe of size 25/20 mm dia in position for addition/alteration or insertion of TEE for branch connection complete with cutting, threading and jointing/fixing including GI fitting as per site requirement

S&F MCB DB, SPN 8 way, IP-43, IK 09, double door type with acrylic door, for fixing MCB fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed.

S&F MCB in replacement DB, SPN 8 way, IP-43, IK 09, double door type with acrylic door, for fixing MCB fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed.

S&F MCB SPN 32/40 Amp , 240V 'B' curve complete all as specified and as directed.

S&F MCB SPN 63 Amp , 240V 'B' curve complete all as specified and as directed.

S&F MCB SP 6 to 40 Amp, 240V 'C' curve complete all as specified and as directed

M & L concealed sub main wiring with 2 runs of 6 sqmm main wire along with 1 run of 6 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

M & L concealed sub main wiring with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

Supply, laying and testing cable for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq mm 2 core.

Material and labour for connection from existing water supply line including Tee of any size pipe necessary fittings complete all as specified and as directed by Engineer-in-Charge.

Making holes for 300 mm dia exhaust fan of suitable shape & size into or through brick walls at groung/First floor including plastering for making good to the original surfaces of any description disturbed including painting /distemper matching with the existing colour. Note : Rates are deems to be including charges of any type of T&P, Insurance of staff deployed at site.

M&LSand filling in cushing bed of cable and consolidation complete as specified

Supply and laying comman burnt clay building sub class `B' bricks, laid over sand Cushioning laid at right angle along with cable, all as specified and as directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete power factor > 0.95, 100 lumen/watt, CCT min 5700K complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing building security light die cast aluminium IP 66 roadway luminaire with high power LED of 25 to 35 watt with toughened glass complete with suitable GI for security light fitting fixing to wall/ column & electrical connection to the light fitting providing 1.5 m long twin core round copper conductor cable of suitable size and testing complete all as specified and as directed by Engineer-in-charge.

Supply and fixing wall mounted LED 20 watt, batten decorative square profile type, approx 4 feet long, pre wired with in built driver complete fitting and all other accessories fitting arrangement including electric connection connecting with using flexible copper wire twin corw upto ceiling rose/ connector complete all as specified and as directed by Engineer-in-charge.

Supply and fixing Sleek Pressure die cast aluminium housing/body, heat resistant clear glass, LED lens for wide beam, energy saving, IP65/66 protection, not less than 5700K, better optics for uniform distribution street/security light/ Roadway luminaire with high power LED 25 watt complete fitting with driver, LED strip and all other accessories etc, suitable for 40/32mm OD entry for direct mounting on pipe bracket, fixing on building and including brackets made out of GI tubing light grade 40mm dia, 2 metre long bent to shape at 120 degree angle at half metre from bottom (as per sample), fixing with MS clamp (02 Nos) and nut bolts, including before fixing applying two coats of aluminium paint on bracket and clamp over a coat of red oxide primer, including making electric connection with using twin core copper cable of suitable size complete all as specified and as directed by Engineer-in-charge.

M&L earthing complete with galvanised steel plate electrode 600mm x 600mm x 6.3mm thick burried directly in ground (earth pit not less than 2.25 mtrs deep below normal ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts check nuts and GI washers earth plate surrounded by picked layer of coal dust and common salt 15cm thick all around bottom and top and watering pipe 20mm bore of GI pipe medium bore GI pipe light grade connected to funnel heavy wire mesh for watering purpose and 15mm bore GI pipe light grade for protection of galvanised earth wire from earth plate upto 7.5 metre and connecting to , main switch board including 10mm thick cast iron cover angle iron frame and PCC 1:2:4 type B-I for concrete pit, including necessary excavation and earth works etc , as shown in electrical plate No 5 of SSR Part - I of 1991 and testing on completion all as specified. Note : PCC chamber shall be constructed at least 1.5m away from earth pit pipe for watering shall be provided in slanting manner.

V K CONTRACTOR

M/s Kamal Constructions

M K Enterprises

FAQIR CHAND

M/s Kamal Builders

P K BANSAL CONTRACTOR

M/S SAI BUILDERS

M/s Manav Builders