Karnataka

AOC

Works

Roads

Improvements work from Huliyaru-Keralapura (SH-102) ROAD From Ch 24.200 to 25.200km in Doddametikurke village limits in Arasikere tq.

Public Works Department

PWD Division Office Hassan | HASSAN, Karnataka

Amount: ₹1.5 CrCloses: 7 Mar 2026Closed

Timeline

Published21 Feb 2026
Closed7 Mar 2026
Awarded—

Bids

1 Bid7 Mar 2026

#	Company	Amount	Status
1	G M B CONSTRUCTIONS ₹1.5 Craccepted-aoc	₹1.5 Cr	accepted-aoc

Tender Value

₹1.5 Cr

EMD Value

₹2.2 L

Closing Date

7 Mar 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Jayanna R

Office Number

Mobile Number

Work Description

Improvements work from Huliyaru-Keralapura (SH-102) ROAD From Ch 24.200 to 25.200km in Doddametikurke village limits in Arasikere tq.

Tender Information

Tender ID

PWD/2025-26/RD/WORK_INDENT33874

Reference Number

PWD/2025-26/RD/WORK_INDENT33874

Tender Type

Open

Product Category

Roads

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Hassan

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredKPWD Class-III and above Registration Certificate

RequiredContractors has to upload the EPF Registration

RequiredAnnual Turnover Certificate certificate issued by Approved Chartered Accountant with UDIN i.e., 2020-21,2021-22 , 2022-23, 2023-24, 2024-25 as per KW-4 Rs. 296.00Lakhs

RequiredWork done certificate as per KW-4 50 percent amount put to tender i.e., Rs. 74.00 Lakhs certificate should be issued not below the rank of Executive Engineer

RequiredLine of credit as per KW-4 Rs. 111.00 Lakhs

RequiredAssessed available tender capacity-AxNx1.5 -B should be greater than or equal to Rs. 148.00Lakhs

RequiredMinimum quantities of work 1. Earth work/Subgrade/Embankment-1848.00Cum, 2. GSB-157.00 Cum, 3. WMM-262.00 Cum, 4.Cement Concrete- 623.00Cum, 5. Asphalt-115.00Cum 6.Steel-32.20Tonnes

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. The Tender processing fee shall not be refundable.

The employer reserves the rights to reject one or all Tender without assigning any reasons and Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender and the employer will in no case be responsible and liable for these costs

The employer is not responsible for any delay in accessing E-Procurement Portal

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

As per Government order LD/300/LET/2006 Bangalore dated 1.01.2007 nad Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

Successful bidder has to furnish 0.1% of award contract amount as insurance during entering in to agreement.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval and all the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise tender will be rejected.

Materials required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work.

Contractors should be registered with KPWD Class III and above Registration

To qualify for award of this contract, each tenderer should give all details and documents as per KW-4 and Work should be carried out as per KW-4 STD attached with tender .

The period of completion of this work is 4 Months & the eligible contractor should maintain the work for ONE YEAR after the successful completion of the project.

Contractors has to upload the EPF Registration and Contractors has to submit their labour EPF details with every Running Bill. Contractor shall bound to comply the prevailing rules and regulations with regard to the EPF Contribution rules and any modifications thereof before and after execution of agreement

Estimate rates are excluding GST as per govt Circular No:FD 417 Exp-12/2024, Banglore Dtd:09.08.2024 and prevailing GST (18% of amount put to tender) amount is kept in form of Lumpsum in sanctioned estimate. Therefore amount put to tender and ECV amount are excluding GST. But the itemwise rates do not include GST. Hence GST will be paid separately for the Executed amount accordingly.

The GST shall not be paid in the extended period of contract for which the Contractor alone is responsible for delay as determined by the authority while granting the extension of time. The Government and the Contractor are abide to any increase or decrease in GST during agreement period

The successful Tenderer shall deliver to the Employer a Security deposit in the prescribed form in the favour of the Executive Engineer, PWD Division, Hassan, given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with the Conditions of Contract.

The FSD payable at the time of executing agreement, will be refunded only after successful completion of Defect Liability Period

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured according to ENVIRONMENTAL MANAGEMENT SYSTEM (EMS ISO 14001:2015) & QUALITY MANAGEMENT SYSTEM (QMS ISO 9001:2015) Policies, so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Formation levels and other data furnished are bare minimum, the contractor should make all efforts to validate and to get additional data if required at his own cost.

Contractor should take all precautions to ensure that no damage is caused to the existing public/ private properties which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project.

The Contractor should upload original scanned copy of Purchase invoice/RC Book/Sale Deed duly attested by Notary along with original purchase invoice/Ownership transfer in RC book/Hire or Lease Agreement duly attested by Notary along with original purchase invoice or RC book

Contractors are responsible for ensuring Safety and also whole & Sole responsibility for any injury or risk factors of workers

Bankers Certificate for the stipulated amount as per clause 3.3 (b) should be submitted in the format as prescribed in the bid document (Section-3 Clause 1.10) only. Otherwise tender is liable for rejection.

The Contractor has to establish Field laboratories and should furnish the documents for having required lab testing equipments.

The contractor shall maintain pothole free road during DLP ,if potholes found the contractor should attend the issue within 24 hours as per the instructions of the Executive Engineer

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

List of Financial Resources with Certificates

Past Experience

ITT Clause 3.2 To qualify for award of this contract, each Tenderer in his name should have in the last five years period i.e., 2020-21,2021-22, 2022-23, 2023-24, 2024-25 (b) Mandating Satisfactorily completion as prime contractor, for atleast one similar work to an extent of 50 percent of the cost of the work for all the works value not less than Rs. 74.00 Lakhs (Updated to 2025-26 Price Level)

Others -- Certificate issued from the competent authority not below the rank of Executive Engineer

ITT Clause 3.2 (c) Executed in any one year i.e., 2020-21,2021-22 , 2022-23, 2023-24, 2024-25 the following minimum quantities of work 1. Earth work/Subgrade/Embankment-1848.00Cum, 2. GSB-157.00 Cum, 3. WMM-262.00 Cum, 4.Cement Concrete- 623.00Cum, 5. Asphalt-115.00Cum 6.Steel-32.20Tonnes (usually 80percent of peak annual rate of construction)

Others -- Certificate issued from the competent authority not below the rank of Executive Engineer

Capabilities of Vendor

ITT Clause 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under : Assessed available tender capacity:(AxNx1.5 -B ) should be greater than or equal to Rs.148.00 lakhs where A-Maximum value of works executed in any one year during the last five years taking into account the completed as well as works in progress. (updated to 2025-26 price level) N-Number of years prescribed for completion of the works for which tenders are invited-4 Months. B-Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 4 Months. (Period of completion of the works for which tenders are invited)

Others -- Submit information as per Section 3 of Tender Document

Financial Status

ITT Clause 3.2 To qualify for award of this contract, each Tenderer in his name should have in the last five years period i.e., 2020-21, 2021-22, 2022-23, 2023-24, 2024-25 (a) Achieved in atleast two financial years a minimum financial turnover of Rs. 296.00 Lakhs (in all classes of civil engineering construction works only) (Updated to 2025-26 Price Level) (Usually not less than two times the estimated annual payments under this contract)

Others -- Balance Sheets, Profit & Loss Statements certified from an Registered Chartered Accountant with UDIN

ITT Clause 3.3 Each Tenderer should further demonstrate (b) Liquid assets and /or availability of credit facilities of not less than Rs. 111.00 Lakhs (credit lines / letter of credit/ certificates from Nationalized banks) for meeting the fund requirement etc (usually the equivalent of the estimated cash flow for three months in the peak construction period) (The fomat should be as per KW-4 Bid document Section-3 Para 1.10)

Others -- Certificate from Schedule Bank in the prescribed form as per KW-4

Others

Contractors has to upload the EPF Registration

Others -- Valid EPF Certificate

KPWD Class-III and above Registration Certificate

Others -- Valid KPWD Registration Certificate

Fee & Financial Details

Tender Fee Amount

₹3,700

EMD Fee Amount

₹2.2 L

Important Dates

Last Activity

7 Mar 2026

Published

21 Feb 2026

Bid Opening

9 Mar 2026

Download Ends

5 Mar 2026

Pre-Bid Meeting

4 Mar 2026

BOQ Preview

•

Improvements work from Huliyaru-Keralapura (SH-102) ROAD From Ch 24.200 to 25.200km in Doddametikurke village limits in Arasikere tq.

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Preparation and Surface Treatment of Formation. - Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, t...

•

Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared sur...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

•

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

•

Kerb Stones - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer i...

•

Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...

•

Providing and Fixing of Median Marker that are made of tough, high impact resistant, injection-molded, thermoplastic body with an isosceles trapezoidal structure of length, width...

•

Road Delineators - Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fit...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Roadway Utilities - Providing and laying Double wall Corrugated HDPE pipes for Electrical. Telecommunication & Signalling lines having flexibility & anti termite, anti corrosive, good abrasion, fatigu...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV ret...

•

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

•

Bituminous Concrete Grading II for traffic <20 MSA - Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, pre...

•

Dense Graded Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified gradi...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Improvements work from Huliyaru-Keralapura (SH-102) ROAD From Ch 24.200 to 25.200km in Doddametikurke village limits in Arasikere tq.(Electrical Work pole shifting)

•

RCC Pole - 9 Mtr Long, 145 Kg WL (V-6 ESCOM P.No 3/ 1/1.01) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all ot...

•

Labour For RCC Pole(V-6 ESCOM P.No 44/ 30/2.02) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incident...

•

Pre - Stressed Tubular Spun Pole 11 Mtr Long - 500 Kg WL (V-6 ESCOM P.No 3/7/1.07) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries an...

•

Labour for Spun Pole (V-6 ESCOM P.No 44/ 33/2.05) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incide...

•

PSCC Pole - 9 Mtr Long, 200 Kg WL (Dwg No. BESCOM/GM/QS&S/50 Dtd 24.11.2018) as per REC Standards (V-6 ESCOM P.No 3/ 6/1.06) ---- With all lead and lift including cost and conveyance of all materials,...

•

Labour (V-6 ESCOM P.No 44/ 30/2.02) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incidental charges e...

•

Spiral Earth Electrode (V-6 ESCOM P.No 26/2.16) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incident...

•

Labour for Spiral Earth (V-6 ESCOM P.No 44/36/2.08) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other inci...

•

11 kV, Horizontal Cross Arm (V-6 ESCOM P.No 3/12.2.02) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other i...

•

Labour for Horizontal Cross Arm (V-6 ESCOM P.No 45/52/5.04) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all ot...

•

11 kV, 45 kN Polymeric Insulator (V-6 ESCOM P.No 5/ 56/6.10) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all o...

•

11 kV, 5 KN Composite/Polymeric Pin Insulator (24 mm Dia FRP Rod) V-6 ESCOM P.No 5.52.6.06 ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machin...

•

LT 4 Pin Cross Arm GI (V-6 ESCOM P.No 4 I.No 16/2.06) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other in...

•

Labour for 4 Pin Cross Arm (V-6 ESCOM P.No 45 I.No 50/5.02) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all ot...

•

1.1 kV Polymeric Pin Insulator V-6 ESCOM P.No 5.51.6.05 ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other ...

•

No. 8 Strain Insulator (V-6 ESCOM P.No 5/53/6.07) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incide...

•

Guy Set Complete with No. 15 Strain Insulator ((CDS-1) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other i...

•

Labour for Guy Set (CDS-1) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incidental charges etc.,compl...

•

HT ST Support 50x8 mm Flat - GI (V-6 ESCOM P.No 4/22/2.12) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all oth...

•

GOS Set 200 Amps Single break (V-6 ESCOM P.No 11/166/24.01) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all ot...

•

Labour for GOS Set(V-6 ESCOM P.No 48/97/13.02) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incidenta...

•

H-Frame for mounting GOS (CDS-15) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incidental charges etc...

•

Labour for H-Frame (CDS-15) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incidental charges etc.,comp...

•

Rabbit ACSR (6/3.35 mm Al+1/3.35 mm St), Std Wt: 214 Kg/KM (V-6 ESCOM P.No 5, I.No59/7.02 ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machine...

•

Labour ACSR (V-6 ESCOM P.No 46, I.No 67/7.02) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incidental...

•

Weasel ACSR(6/2.59 mm Al + 1/2.59 mm St), Std Wt: 128 Kg/KM (V-6 ESCOM P.No 5, I.No 58/7.01) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all mach...

•

Labour ACSR (V-6 ESCOM P.No 46, I.No 66/7.01) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incidental...

•

Erection of 3 Phase, 11kV/433V, 25 kVA BEE 4/5 Star Rated Distribution Transformer Centre Using 9 Mtr RCC Pole DPTC(CDS-24) With out Transforme ---- With all lead and lift including cost and conveyanc...

•

Labour(CDS-24) (18669-1193=17476) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incidental charges etc...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required.25 x 6 mm GI strip( Elec SR Vol-6 P.No.59/12.58.3) ---- With all lead and lift including cost and conveyance of...

•

Releasing & Refixing of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth (V-6 ESCOM P.No 44/ 30/2.02)(1113*1.9) ---- With all lead and lift including cost and conveyance of all materials,la...

•

Releasing & Refixing of V-Shape/Horizontal cross arm for DC Line including Brace and Insulator fixing. (Without Single Top Support (V-6 ESCOM P.No 45/52/5.04) (160*0.9) ---- With all lead and lift inc...

•

Releasing & Refixing of 4 Pin cross arm with Insulator and Braces fixing (V-6 ESCOM P.No 45/50/5.02) (160*0.9) ---- With all lead and lift including cost and conveyance of all materials,labour, hire c...

•

Releasing and Restringing of Conductor (including pin binding, providing jumps, dead ending, etc.,) Rabbit (Escom Pg 46, I.No 67/7.02)(5233*1.9) ---- With all lead and lift including cost and conveyan...

•

Releasing and Restringing of Conductor (including pin binding, providing jumps, dead ending, etc.,) Weasel (Escom Pg 46, I.No 66/7.01)(3975*1.9) ---- With all lead and lift including cost and conveyan...

•

Releasing & Refixing of Double Pole Transformer Structure using 9 Mtr Long RCC (145 Kg WL)/PSCC (300 Kg WL) Pole including fixing of Structure Materials, Erection of Poles etc., complete for mounting ...

•

Releasing & Refixing of GOS Set(V-6 ESCOM P.No 48/97/13.02) (1104*1.9) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments...

•

Releasing & Refixing of Labour for H-Frame (CDS-15) (323*1.9) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all ...

•

Improvements work from Huliyaru-Keralapura (SH-102) ROAD From Ch 24.200 to 25.200km in Doddametikurke village limits in Arasikere tq.(Street light)

•

Supply of LED Streetlight with pressure die cast aluminium housing body with optimal heat sink for better thermal dissipation. Diffuser with Injection moulded & is made of polycarbonate material with ...

•

Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4" dia telescopic M. S. pipe, with 2" dia1.5m long M.S.Bracket and are welded with suitable angle, using 6mm thick M. S. sh...

•

Fabricating, supplying and erection of . ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, ...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 (ESCOM ...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5to25 Sqmm (ESCOM P.No 52/SL No 21.05) ---- With all ...

•

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works,as per drawing and technical specifications, incl...

•

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

•

Aluminium End Terminal (Lug) 16 Sqmm(Vol-6 P.No 27/1.1.2) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all othe...

•

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm (ESCOM P.No 15/249/ 35.01) ---- With all lead and lift including cost and conveyance of all materials,labour, hire ch...

•

Brass Cable Gland 32 mm (ESCOM P.No 28/508/63.02) ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incide...

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required. (Vol-6 P.No 60/25 x 6 mm GI strip) ---- With all lead and lift including cost and conveyance of all materials,...

•

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.(Vo...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' cure, indicator ON/OFF, energy cross-3 with Short circuit breaking cappacit...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (Vol-6 P.No 19/5.38) (Inclusive of GST ) ---- With all lead and lift includ...

•

Supplying . amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which ...

•

Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.60Amps (...

•

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers (Vol-6 P.No 21/5.48) ---- With all lead and lift including cost and conveyance of all m...

•

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. (Vol-6 P.No 19/5.35) ---- With all lead and lift including co...

•

Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low conductor resistance single core wire in open or conceanled system of wiring with specified I...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. (14/5.7.2)32Amps ---- With all lead and lift including cost and conveyance o...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Earth work in surface excavation for stripping, seating of bund, Road way by manual means for lowering & levelling the ground for all works other than foundation & depth in Ordinary rock and soft rock...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW 4-33874.docx

Tender Document • 1.36 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

G M B CONSTRUCTIONS

₹1.5 Craccepted-aoc