PROVN OF MS LADDERS IN BLDG NO P-98 and P-99 AND SPL REPAIR PARTLY TO BLDG NO P-23 (KOTE) AND PROVN OF WASHING POINT NEXT OH WATER TANK AT SEWAR FORT BHARATPUR

Amount

M&L for 15 mm thick rendering surface fair face of brick-work or stone masonary surface with cement mortar 1:4 finished even & fair complete all as specified and directed.

All as above item no 1 but on other than fair faces of brick work or concrete surface with cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed

M&L for excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth, for foundation, etc, or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan and n.exc. 1.5 m in depth and getting out in Soft/Loose soil complete all as specified and directed

M&L for plain cement concrete type D2 1:4:8 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed

M&L for removing excavated materials to a distance n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point in soils complete all as specified and directed

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm in soft/ loose soil complete all as specified and directed

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoin jambs pillars etc complete all as specified and directed

M&L Brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed

All as per item No 7 above but except bricks

All as per item No 7 above but in CM 1:4

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil complete all as specified and directed

Cutting holes exc 150 sqcm but n.exc 400 sq cm into or through brick walls, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed

M&L for rolled mild steel framed work such as grill grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors , laddres, door gate frame, framed baliusters, walk ways, railing , frame work of water tank and similar work conforming to Fe-290, Gde-E-165 complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L Cement concrete 1:3:6 Type C-2 ( using 40 mm graded crushed stone aggregates ) in foundations filling and mass concrete complete all as specified and directed.

M&L for surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed

M&L for broken stone or boulders in hardcore of gauge exc 63 mm but n.exc 100 mm deposited spread and levelled in layers n. exc 15 cm thick watered and rolled/rammed to a true surface complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8 type D-2 using 40mm graded aggregate complete all as specified and directed.

M & L for Endura Designer as in sub base Collection Series of Jhonson Tiles or ,Kajaria or somani tile of size 400x400x10 mm having with water absorption less than 0.5% and conforming to IS: 15622 in all colours and shades in for outdoor floors , laid on 15mm thick base of cement mortar 1:4 in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc Including all arrangments like scaffolding complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of Priming plastered and other surfaces with alkali resistant priming paint primer with hand roller complete all as specified and directed

M & L for Preparation of new plastered surface of wall including cornices, pilasters etc by brooming down and applying two coats of distemper oil emulsion white or tinted over & including a coat of alkali resistant priming paint wall primer with hand roller over 3mm thick wall care putty complete all as specified and directed.

M&L for Preparation of old decorative concrete, plastered/ un-plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surface and applying one coat of cement based paint using hand roller of approved colour complete all as specified and directed.

All as per Srl item No 21 here in above but applying one coat of distemper oil emulsion using hand roller white or tinted on Wall including preparation of surface complete all as specified and directed.

M & L Preparation of old decorated plastered or undecorated plastered surface of ceiling including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash on ceiling complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiling to store and rubbish off the premisses complete all as specified and directed.

Providing and laying dual charghed vitrified floor tiles 600 x 600 x 9 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete all as specified and directed

Demolition of PCC in ground floors and pavings not exc 15cm thickness ( below or above ground level ) complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed 20 mm thick in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary ,rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed 15 mm thick in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding ,rubbing and polishing complete all as specified and directed.

Dismantling stone slabs in roofs, suspended floors, chajjas, landings, etc., any thickness, jointed in any mortar complete all as specified and directed.

M&L for fixing of sunroof stone (of approved quality) of thickness 75 mm, wherever required as per approved design, including cost of inserting/fixing of stone up to 9m height complete all as specified and directed.

M&L for sand stone slabs 4.0cm thick in sun shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n. exc. 3 m in length, punched dressed on face and along exposed edges, self faced on other side and set in lime mortar 1:2 or cement mortar 1:4 complete all as specified and directed.

Taking down chowkats or frames n. exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutter of any description area exc 1 sqm and n. exc 2 Sqm each complete all as specified and directed.

Taking down chowkats or frames exc. 1.5 sqm but not exc. 4 sqm each without taking off shutters from frames complete all as specified and directed.

Taking down shutter & Resecuring or easing & adjusting shutters of any description exc 1 sqm and n. exc. 2 Sqm each. & refixing in Same opening complete all as specified and directed.

Factory made steel window with side hung shutteers including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat of zinc chrome primer complete all as specified and directed.

All as per item No 38 above but without glazing bars.

S&F 35 mm thick 2nd class hardwood( hollock ) factory made plain framed, panelled shutters (any No. of panels) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces size of members as per IS 1003 PtI complete all as specified and directed.

S&F 35 mm thick 2nd class hardwood ( hollock ) factory made glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc.( without sash bars ), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc., sizes of members of shutters as specified in SSR Part I complete all as specified and directed.

S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 including necessary welding etc. and fixed in position complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete all as specified and directed.

S &FMild steel pressed steel bow handle oval type stove enameled black of size 150 mm (ISI marked) complete all as specified and directed.

S&F MS sliding door bolt, plate type, 300mm long, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, 4 on bolt plate and 2 on staple plate and fixed complete all as specified and directed.

S&F 150 mm long mild steel barrel tower bolts stove enameled black with bright bolt (ISI marked) complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Hacking out old broken glass any thickness, size, quality or description from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.

M&L for Sheet glass ordinary quality 3 mm thick and glazing with oil putty in square n. exc 0.50 sqm in each pane complete all as specified and directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completeFe 410 -W (Gde- E- 250) quality-B complete all as specified and directed.

S&F 1.0 mm thick mild steel plain, black sheet in wall clading, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with rivets or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for preparing surfaces of any description over 10 cm girth or width, not otherwise described and applying one coat of synthetic enamel paint on old treated surfaces of steel or iron complete all as specified and directed.

M&L for preparation of new or old untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for one coats of synthetic enamel paint on old treated surfaces of wood of any description, not otherwise described, over 10 cm width or girth including preparation of surfaces complete all as specified and directed.

Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any typecomplete all as specified and directed (also including the rate for disposal of building rubish/malba of dismantled or waste material collected after demolition of existing treatment & dumping for lead exceeding 500m but n exc upto 1km for all lifts) complete all as specified and directed.

M&L for pcc1:2:4 type B1 (using 20mm graded stone aggregate) in roof covering , benching , etc 40 mm thick finished even and smooth with out using extra cement complete all as specified and directed.

M&L for screed bed or bedding layer of cement mortar 1:4, 15 mm thick for floor finished without using extra cement mixtd with water proofing compound complete all as specified and directed. Note :- WPC shall be supplied & paid seprately.

Supply only water proofing compound ISI marked complete all as specified and directed.

S&F APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5 Kg/sqm , reinforced with polyster non-woven fabric (weighing not less than 150 gm/sqm and upper side of membrane thermally insulated with white mineral gravel finish, informaly embadded during manufacturing process shall only be used. It shall be laid by torch application,side overlaps shall be 75mm and the ends shall be 100mm and all over laps shall be sealed by torch application including applying a coat of cold applied bitumen primer conforming IS:[email protected]/sqm & applied a Hot blown coat of bitumen layer spread over primer @ 2.0 Kg/Sqm complete all as specified and directed.

S&Fin repair of PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, ISI marked of 75mm bore complete all as specified and directed.

M&L for PCC (1:2:4) type B-1, 20mm graded stone aggregate 40 mm thick as in surface layer of floors, finished,even & fair complete all as specified and directed.

M&L for welding in repairs n. exc. 2.5 cm in length and N. exc 6 mm thickness of metal to be welded complete all as specified and directed.

M&L for welding in repairs exc. 2.5 cm but n. exc. 5 cm in length and N. exc 6 mm thickness of metal to be welded complete all as specified and directed.

M&L for running welding in repairs N. exc. 6mm thickness of metal to be welded complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, bell,socket or power) complete fittings such as switches, ceiling roses, pendents, holders,regulators, sockets etc and making good disturbed surfaces of wall, floor & ceiling etc.complete all as specified and directed.

Dismantling of old U/S rusted main switch/DB of any size capacity and make complete all as specified and directed.

M&L point wiring complete with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in rigid PVC conduit pipe size not less than 20mm dia with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the concealed surface of wall/ceiling by means of PVCsleevel/dash fastners with cadmium plated screws including suitable size SS / MS shunken/metal flush box for mounting of flush type/modular fittings like switches, sockets, fan regulator etc including 1.5 Sqmm PVC insulated but unsheathed copper earth continuity conductor (in green color) to common earth and connedcted to earth dolly complete all as specified for the following :- (a) One light point controlled by one way switch.

(b) One ceiling fan/wall fan/exhaust fan point controlled by one way switch.

(c) One 3 pin 6 Amp socket point outlet on the same board with other switches

(d) One 3 pin 6 Amp socket point outlet on the independent board

All as per item No 68 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps switch socket outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly complete all as specified and directed.

S&F ceiling rose surface bakelite 50 x 40 mm three terminal ISI marked including suitable size of PVC board complete all as specified and directed.

S & F Lamp holder, PVC/polycarbonate type with cord grip cap suitable for pendant fitings complete all as specified and directed.

S & F stepped type electronic fan regulator flush type 230 volt, 100 watt on the existing phenolic laminated sheet etc. complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 Amps multi purpose flush type 230 volt complete all as specified and directed.

S&F switch piano flush button single pole one way 6 Amps 230 volt grade complete all as specified and directed.

S&F switch socket combination 2 in 1, 5 A flush type complete all as specified and directed.

S&F switch socket combination 3 pin 16A, flush type complete all as specified and directed.

M&L submain wiring complete with 2X 6 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor and one run of 6 Sqmm copper cable for earth continuity conductor and including rigid PVC conduit with all PVC accessories fixed on concealed surface complete all as specified and directed.

M&L submain wiring complete with 2X 4 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor and one run of 4 Sqmm copper cable for earth continuity conductor and including rigid PVC conduit with all PVC accessories fixed on concealed surface complete all as specified and directed.

Distribution board factory made and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 240 volt of the following DBs in etc :-. (a) 4 way TPN with 200 amps rated busbar 415 volts (double door type).

(b) 8 way SPN with 200 amps rated busbar 240 volts (double door type).

S&F MCCB/MCB 415/240 volts fixed in DB's of the undermentioned type and rating. Note: Make of MCCB/MCB should be same of DB. (a) MCB TPN 63 Amps 415 volt, Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828)

(b) MCB SP 6-32 Amps, 240 volts,Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828)

(c) MCB SPN 40 Amps, 240 volt,Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828)

Taking out existing LED tube light and fixing after repair work complete necessary fixing arrangements on wall complete all as specified and directed.

Supply and fixing LED 20 watt LED tubelight fitting retro fit type with replacable rod complete with all accessories including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified and directed.

Taking out LED bldg security light incl GI bracket and fixing after repair work including nuts bolts & washers complete necessary fixing arrangements on wall/ pole complete all as specified and directed.

M&L bracket light fitting wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LED lamp B22 base complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply, laying and testing incl necessary excavation work for cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, size 25sqmm x 4core electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor complete all as specified and directed.

M&L GI pipe medium grade 20mm grade for hanging of ceiling fan from high rise roof complete all as specified and directed.

M&L GI pipe medium grade 50mm grade for hanging of ceiling fan fixed in wall to wall at roof level height complete all as specified and directed.

Taking out exhaust/ceiling fan and fixing after repair work at existing/where required incl minor repair of greasing/oiling,capacitor replacement,paiting,service wire from fan to ceiling rose ,MES No writing on fan complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed.

S & F street light GI bracket of 0.6 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of FL 40 x 6mm including nuts bolts & washers complete necessary fixing arrangements on pole complete all as specified and directed.

S&F 35/36 watts LED street light fitings new generation energy saving, environmental friendly, long life, versatile pressure die cast aluminium IP66 with 10KV surge protection road way, luminaire with high power LED as light source with warranty option of 5 years and suitable drivers etc and connecting with 2.5 sq mm solid aluminium conductor PVC insulated twin core weather proof cable from fittings to over head lines or to the jucntion box and fixing to complete all as specified and directed.

M & L earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 15 mm bore from earth elelctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM sheet (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 2 Nos and with 8mm dia MS bar handle made to shape, GI pipe medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, complete all as specified in electrical plate No 3 of SSR Part I and connection to earth test point including testing on complete all as specified and directed. Note :- The cost of funnel pipe of 20 mm GI light grade and protection pipe of 15mm bore GI light grade to be included in quoted unit rate.

Supply, install, testing & commissioning High Pressure Cleaner working pressure 30/200 bar, flow 16 LPM, III phase 400/ 415 Voltage 50 HZ 1400 RPM of capacity 5.5/7.5 KW car and track cleaning with suitable size of foot valve including foundation for grouting of pump including MS protection cover for pump set with all accessories ( 1Gun+1 flat+1 rotary lance+15 mtrHD , QC ftg) as required for foundation complete all as specified and directed. Make : Kranzle, cat no- Bully 1000 TST or equivelents

suuply and fixing XLPE insulated amoured heavy duty electric cable with aluminium conductor 1100 volts grade cross area 10 sqmm 2 core complete all as specified and directed.

Supply and fixing of rotational moulded Polyethylene Water storage tank (Cylindrical verticla with closed top) hoisted and fixed in position 2000 ltr capacity complete all as specified and directed.

Material and labour submersible flat cable of 4 sqmm, 3 core copper conductor cable suitable for 03 HP pump motor complete connection fron starter panel to motor complete all as specified and directed.

S&F of DOL starter for 2/7.5 HP capacity, 415Volts, 50Hz, complete all as specified and directed.

S&F GI tubing medium grade ISI marked including all fittings laid in trenches / fixed on wall of size 25 mm bore complete all as specified and directed.

S&F GI tubing medium grade ISI marked including all fittings laid in trenches / fixed on wall of size 20 mm bore complete all as specified and directed.

Supply and fixing of Hose pipes of pressure rating 20kgf / cm complete all as specified and directed.

Supply, and fixing ball valves high pressure PTMT with epoxy coated Aliminium rod & highdensity plastic ball screwed for iron pipe and fixed 25mm -45 gms complete all as specified and directed.

M&L gun metal gate or globe valves with iron wheel head (ISI Marked), screwed both ends for iron pipe and fixed of size 20 mm bore complete all as specified and directed.

M&L of gun metal gate or globe valves with iron wheel head (ISI Marked), screwed both ends for iron pipe and fixed of size 25 mm bore complete all as specified and directed.

Rendering 10 mm thick in cement and sand mortar (1:4) on fair faces of brick work or concrete surface of wall, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for Soling 200 mm thick (spread thickness) in two layers of 100 mm spread thickness, each layer rolled and consolidated with broken stone Boulder or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and directed.

M&L for 150mm Thick compacted thickness WBM in two equal layers of 7.5cm thick each with Coarse agg of Grading 2(63-40mm) or of Grading 3 (50-20mm) Limestone, sand stone,Flint or Quartzite spread,rolled & Consolidated to gradient & camber required (lime stone ,flint or quartzite used) complete all as specified and directed.

M&L for PCC 1:1.5:3 type B-2 ( using 40 mm graded stone aggregate) 100 mm thick as in floors finished even and smooth using without using extra cement complete all as specified and directed.

Supply only Fine Agg sand for bedding/cushioning of interlocking paver blocks complete all as specified and directed.

M&L for 60mm thick M-35 factory made chamfered edge Cement Concrete paver blocks, of required strength, thickness & size/ shape, made by table vibratory method using PU mould/rubber molded, laid in required colour & pattern over 25mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. Note:- Sand cushion shall be supplied and paid separately.

Removing excavated material exc. 50m and n.exc 200m depositing where directed at a level n exc. 1.5 m above the starting complete all as specified.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for PCC in surface channals or drain 1:2:4 type -B1(using 20mm graded crushed stone aggregate) complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick on stone or other than fair faces of brick surfaces in CM 1:4 surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for providing precast cement concrete Type B1 1:2:4 (20 mm graded stone aggregate) set in CM 1:4 for manhole cover complete all as specified and directed.

S&F Mild steel bars TMT 10 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

All as item No 126 above but 6mm to 8mm dia complete all as specified

All as item No 126 above but 5mm dia and over upto and including 10mm dia in strirrups spacers and binders complete all as specified.

M & L for excavation over areas, n.exc 1.5m deep and getting out in soft/loose soil, complete all as specified.

Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 230 mm thick (Horizontal or slopping) rough finished flat surfaces, complete all as specified.

Use and waste form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof n. exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or slopping and similar work exc 10 cm but n. exc 23 cm wide rough finished surfaces of concrete, complete all as specified.

M & L for reinforced concrete M-25 (using 20 mm graded Stone aggregates) as in kerbs, chullah, hoods, stairways (Except spiral staircases) including steps (square or spandrel), string pieces, carriages, etc, complete, any section straight or winding but excluding landing for RCC water tank upto 1500 Ltr, complete all as specified.

M & L for RCC M-25 (design mix) (using 20 mm graded Stone aggregates) as in slabs supported on wall, beams and columns in floors, roofs landing, balconies, canopies, deck slabs and shelves and the like, complete all as specified and directed.

M & L for 80 mm thick PCC 1 : 2 : 4 type B-1 (using 20 mm graded stone aggregates) as in floor, finished even and fair, complete all as specified.

M&L Providing cement concrete in copings, kneelers, appex 1:2:4 type B-1( 20 mm graded stone aggregates)stones, bed plates complete all as specified and directed.

M/s Ranaji Construction Co