PROVN OF 01 Nos VOCATIONAL LABS UNDER PM SHRI SCHEME AT KV No. 2 PATHANKOT UNDER GE(WEST)PATHANKOT

Amount

Sch 'A' Part-I B/R work:- Surface dressing n exc 15 cm deep in any type of soil complete all as specified and directed by Engr-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft & loose soil complete all as specified and directed by Engr-in-Charge.

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m to 03 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in depth and getting out soft & loose soil complete all as specified and directed by Engr-in-Charge.

M&L for Treating the bottom and sides of excavation, top surface of filled earth and soil under plinth protection @5 litres of emulsion per square metre of surface area with ANTI-TERMITE TREATMENT complete all as specified and directed by Engr-in-Charge.

M&L for Cement concrete Type D-2 1:4:8 (using 40 mm graded graded crushed stone aggregate) in foundations, filling and mass-concrete and sub base of floor complete all as specified. and directed by Engr-in-Charge.

Returning filling in including spreading, levelling, watering and well remming in layers not exceeding 25cm thick in hard/dense soil complete all as specified.

Removal to excavated material (Soil) to a distance not exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

M&L for RCC Design mix, M-25 ( using 20 mm graded crushed stone aggregate ) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr-in-Charge. (Note:-TMT bars will be masured and paid sepretly)

M&L for RCC Design mix, M-25 ( using 20 mm graded crushed stone aggregate ) as in Columns, pillars, piers, posts and struts complete all as specified and directed by Engr-in-Charge. (Note:-TMT bars will be masured and paid sepretly)

M&L for RCC Design mix, M-25 ( using 20 mm graded crushed stone aggregate ) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engr-in-Charge. (Note:-TMT bars will be masured and paid sepretly)

M&L for RCC Design mix, M-25 ( using 20 mm graded crushed stone aggregate ) as in chajja complete all as specified and directed by Engr-in-Charge. (Note:-TMT bars will be masured and paid sepretly)

M&L for RCC Design mix M-25, type B-1 (using 20mm graded crushed stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge.

Formwork to chullah hoods, chajjas, troughs and similar items in?cluding edges

Formwork to sides of pillars, posts, struts, piers, columns and stanchions

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed

S&F mild steel TMT bars 10 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge.

S&F mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge.

M&L for Fly ash brick work, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Fly ash brick work, straight or curved on plan to any radius in half brickthick walls built in cement mortar 1:4 complete all as specified and directed.

M&L for 40mm thick Damp proof course in cement concrete 1:2:4 type B-0 (using 12.5mm thick crushed stone aggregate) to horizontal or vertical surfaces including mixing with integral water proofing compound (as per manufacturer instruction) including necessary formwork complete all as specified and directed.

M&L for Rendering 15 mm thick on other than fair face of brick work or concrete/stone surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified.

M&L for Rendering 15 mm thick on fair face of brick work or concrete/stone surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified.

M&L for rendring 05mm thick in CM 1:3 on concrete surfaces/chajja/ceiling, etc finished even and smooth without using extra cement complete all as specified.

S&F factory made Pressed steel frame of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete and including back filling of hollow portion of frame, fixing of hold fast with plain cement concrete type B-0, 1:2:4 using 12.5 mm graded crushed stone aggregate. Pressed steel frames shall be painted with two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as spd and directed

S&F Factory made 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F steel window/Ventilator factory made box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills made out of 10 mm dia round bars glazing with 3 mm thick oridinary glass, guaging (wire mesh stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts ) and two coat synthetic enamel paint over and including a coat of red oxide primer all as per drg No CEPZ/ TD/032/13 sheet 1/2 complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with necessary cutting, drilling and welding. Steel section confirming to Fe-290(Gde E?165) complete all as specified and directed.

M&L for 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

M&L for 25mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F 75mm long butt hinges, heavy weight, cold rolled mild steel

S&F 50mm long butt hinges, heavy weight, cold rolled mild steel

S&F 200mm long aluminium anodised, barrel tower bolts of extruded section

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised

S&F 125mm size hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.

M&L for mild steel work (angle iron or flat iron) as in hold fasts, wall ties, clamps, ventilator pipe, rain water pipe,band, straps, hooks for hanging fans, manhole covers, MS rungs and similar small articles conforming to Fe-310-O or Fe-410-O all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying minimum 1.5mm thick wall care putty on the surfaces & making the surface absolutely smooth surface and applying two coat of distemper oil emulsion over and including one coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

M&L for preparation of newly steel and iron surface of any description width or girth exc 10 cm and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of newly wooden Surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for hardcore of Broken stone or boulders n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base Finishing surfaces of concrete to be even and rough complete all as specified and as directed.

M&L for Glazed coloured ceramic tiles in vertical surface 450X 350X 7-8mm thick such as skirting dado, etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shed of tile including laid over 10mm thick backing layer of cement mortar (1:4) complete all as specified and as directed

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20 mm thick screed bed in cement mortar ( 1:4) complete all as specified and directed by Engr-in-Charge.

M&L for machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match including rubbing and polishing complete including 10 mm thick backing layer in cement mortar ( 1:4) complete all as specified and directed by Engr-in-Charge.

M&L for 20mm thick granite (pure black) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 20mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.

M&L for Cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified.

M&L for preparation of newly concrete surfaces and surface shall be leveled with a layer of 15 mm thick screed bed in CM 1:4 including mixed with water proofing admixture as per manufacturer's instructions and applying roof treatment with APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) with thermal insulation with white mineral gravel finish on upper side of weight not less than 3.5 kg/sqm , laid by torch application method with overlap 100 mm on length side and 100 mm on the width side as per manufacturer's instructions over one coat of approved cold applied bituminous oil based primer (IS-3384) @0.30 litre/sqm complete all as specified and directed

S&F White vitreous china laboratory sink size 600x450x200mm with plugs, washers and wastes; including bedding in cement mortar on to dwarft wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and directed by Engr-in-Charge.

S&F Bottle trap of PTMT having minimum water seal of 25mm Bore dia of discharge pipe 32 mm(Minimum weight 32mm-260gms)

S&F Waste coupling of PTMT (half or full threaded) . Bore dia of discharge pipe 32 mm (Minimum weight 32mm?45gms)

S&F 32mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe

S&F 15mm dia bore GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor including testing complete all as specified and directed by Engr-in-Charge.

S&F 20mm dia bore GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor including testing complete all as specified and directed by Engr-in-Charge.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore complete all as specified and as directed by Engr-in-Charge.

S&F 15 mm bore CP Bib taps cast copper alloy fancy type with capstan heads (chromium plated),and with crutch or butterfly handle, screwed down , high pressure for iron pipe complete all as specified and directed by Engr-in-Charge.. Make:-Jaquar/Cera/Prayag

S&F brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F brass CP Soap Dish or Soap Holder Dish round/oval shaped for Bathroom with fixing arrangement complete all as specified and as directed.

S&F Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position with all fittings all as specified in SSR Part I including 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends of radius 110mm bore complete all as specified and directed by Engr-in-Charge.

M&L for PVC (SWR) floor trap 110 mm with grating, setting and jointing with solvent cement complete all as specified and as directed

M&L for 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) in surface channels and drains complete all as specified and directed by Engr-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified & directed. (Inner girth only measured)

M&L for precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates ) as in landings, cover slabs (for manholes/drain etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for 100mm thick PCC 1:3:6, type D-2 using 40mm graded crushed stone aggregate as in sub base Finishing surfaces of concrete to be even and rough complete all as specified and as directed.

M&L for 80mm thick M-40 Grade, coloured rubber moulded glossy finish Machine pressed precast concrete interlocking paver block confirming to IS 15658-2006 with grey cement and pigment including 25mm thick sand cushioning bed complete all as secified and directed. Note:-Shape, size and colour of interlocking paver block and laying pattern shall be approved by GE.

M&L for providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates ) as in coping, bed blocks, benching and like including necessary formwork complete all as specified and directed by Engr-in-Charge.

M&L for factory made pre-cast cement concrete solid block 1:2:4 type B-1 using 20mm graded crushed stone aggregate in KERB STONE of size 300mmx150mmx300mm and setting in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

Sch 'A' Part-II E/M work:- M&L for point wiring for one light/one fan controlled by one switch with 1.5 Sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with and including PVC rigid concealed conduit heavy duty suitable size with all accessories having thickness not less than 1.8 mm including anodise pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked for switches and sockets , including 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface complete all as specified and directed.

M&L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistrand copper conductor FRLS cable with in and including PVC concealed conduit heavy duty suitable size having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface to match with the existingsurface complete all as specified and directed.

S&F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.

S&F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.

S&F socket outlet 2 in 1, 5 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.

S&F ceiling rose PVC/polycarbonate, insulated body surface bakelite 65 x 50mm three terminals complete all as specified and directed.

S&F ceiling fan regulator electronic socket type 5 stage speed variation.

S&F wall mounted LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply, fixing and testing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), including down rod and required 3 core flexible copper conductor of 0.75 Sqmm complete all as specified and directed.

M&L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing Exhaust fan, havig steel body complete with louvers shutter,Single phase, 230 volts, 300 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor complete all as spd and directed by Engr-in-charge.

S&F vertical distribution board double door made out of sheet metal enclosure (CRCA sheet) dust and vermin proof TPN 4 way with 415 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, triple pole and neutral 415 volts, 3 phase 50Hz, mechnical strength as IK-09, with one MCCB 4 pole 415V 63 Amp , 25KA(adjustable thermal and adjustable magnetic release) as incoming and 12 x MCB's SP 40 Amps C series as outgoing of the same make as of distribution board flush to wall / fixed on surface and making good the disturbed surface as per existing complete all as specified and directed

S&F bldg security light fitting energy saving high efficiency LED street light fitting 35 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 25 mm dia bent to shape having length not less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage.

M&L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt packed around the earth plate and precast PCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion complete all as shown on electric plate No 05 of SSR -2009 Part I and connecting to existing earth test point complete all as specified and directed or including testing on completion.(Note: Excavation and earth work is deemed to be included in the rates quoted).

Supply, laying and testing LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 25 sq. mm 4 core complete all as specified

Excavation in trenches, not exceeding 1.5 m wide and not exc 1.5 m in depth for laying of pipes/cable etc and not exceeding 10 sqm on plan for manholes etc and getting out in any type of soil, complete all as specified. and directed by Engr-in-Charge.

Sand cushioning with fine sand to under ground cables in trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable as specified in clause 19.75 of SSR Part-I complete all as specified and as directed by Engr-in-Charge. Note:-Punned thickness will be measured and paid

M&L for brick covering with width equal to length of brick as mechnical protection to cable with well burnt sub class 'B' bricks laid as directed.

Returning filling in including spreading, levelling, watering and well remming in layers not exceeding 25cm thick in hard/dense soil complete all as specified.

Removal to excavated material (Soil) to a distance not exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

S&F ACSR conductor LT line of size as directed, straching properly on insulators and binding with 2mm aluminium binding wires, jumpers including fixing on insulators on each poles in span and tightening with permissible sag in between span etc complete all as specified and as directed by Engineer-in-charge.

S&F shackle type insulator, vitreous porcelain, white, brown, white or green insulator for working pressure 1100 volts grade of 100 height and 115mm dia including galvanized mild steel straps of 31mmx5mm size, 14mm dia insulator bolts, washers and nuts complete all as specified.

S&F stay assembly complete with accessories as shown in electrical plate No. 1 using stay rod 16mm dia x 1800mm long, stay now 14mm dia and stay plate 30cmx30cmx6mm including stay wire 8 SWG x 7 strands, loop type insulator with overall dimensions 90x140mm and clearance of hole 25.5mm, stay clamps and painting to exposed surfaces of mild steel work with 2 coat of aluminium paint over a coat of red oxide primer, quoted rate will be included with for necessary earth work and concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) complete all as specified and as directed by Engineer-in-charge.

M&L for GI tubing light grade 50mm bore for cable protection laid in tranches or in road crossing or fixed to wall/pole including all fittings complete all as specified and directed by Engr-in-Charge.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore complete all as specified and as directed by Engr-in-Charge.

M&L for cutting/drilling of 40/50mm GI pipe for connection of 20mm GI pipe including all required accessories and earth work if required complete all as specified and as directed by Engr-in-Charge.

S&F 20mm dia bore GI tubes medium grade with all fitting and laid in trenches, floor alongwith walls and ceiling including testing complete all as specified and directed by Engr-in-Charge.

V K Sharma and Sons

M/S Raghuvanshi Builders

M/S S KUMAR & CO

DABGOTRA BUILDERS