SPL REPAIR TO BUILDING NO T 6 (MDF QTRS) AND PROVN OF SAFETY GRILL AND CHAJJA AT BUILDING NO P 122 (JCOS MD ACCN) UNDER AGE B/R (W), COLABA UNDER GE (W) COLABA, MUMBAI

Amount

Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water and removing debris outside MD land (from ground floor to fourth storeys bldgs) including use of scaffoldings all as specified and directed.

Material and labour 15mm thick Ready Mix Plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces, (upto 05 storeys of bldgs) including use of scaffolding all as specified and directed. Note :- Liquid water proofing compound will be measured and paid seperately as supply only.

Demolition of brick work including all quoins, arches, pillars etc. but excluding ashlar facings built in cement mortar all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 metre mean radius built in CM 1:6 all as specified & as directed.

All as per item No 4 here in above but except bricks. (Serviceable bricks obtained from Item No- 3 above to be reused in the work.)

Supply only liquid water proofing compound.

M&L for removing plants including roots by dismantling of brickwork/PCC including necessary scaffolding of any type and in any position or location i.e roof, parapet walls near pipes etc and applying acid after removing roots for preventing the re-growth & making good of disturbed portion using PCC 1:2:4 type B0 & 10mm thick cement plaster in CM(1:3), size of disturbed portion not execeeding 150mm X150mm X 200mm all as specified and directed.

M&L for filling cracks by cutting 'V' groove cracks of internal or external plaster of walls, ceilings/Chajjas all along the crack upto 10 mm and remove the loose plaster/concrete by suitable tools, filling cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat and for external application must be coated with paint including necessary scafolding of any height all as specifed and direcetd. Make : Use of Dr Fixit Crack 'X' shrinkfree paste compound/ Smartcare Texture Crack Filler / Build Core Compound / Fosroc Compound, as approved by GE

M&L for cleaning all loose laitance on the wall and concrete substrate and applying one coat of epoxy bonding agent of SBR latex on exposed concrete surface to ensure bond between old concrete & new concrete by brush application including scafolding at any height as specified and directed. Make: Dr. Fixit epoxy bonding agent or Shalicrete URP of STP Ltd or Nerolac perma SBR latex

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises all as specified and directed.

M&L Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles all as specified and directed.

M&L rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles all as specified and directed.

M&L for digital coloured glazed ceramic tiles 300x450x7mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match the shades of the tiles laid over rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed. Note:- (Rate of Designer border in vertical surface will be deemed into quoted rates)

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles all as specified and directed. Make : Somany Pilkington / Orient bell / Kajaria.

.All as per item No 15 here in before but in vertical surfaces

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados, etc laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified & directed.

M&L for granite (of any colour) 18-20 mm thick machine cut, pre polished, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone as in kitchen platform, flooring , window cill, wall cladding including 15 mm thick screed bedding in cement mortar 1: 6 and all other similar works all as specified and directed.

M&L 20 mm thick machine cut cudappa stone slab in horizental/vertical jamb laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing including screed bedding 15 mm thick in CM 1:6 all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 40 mm dia bore all as specified and directed

Fixing only old 15 mm steel tubing including cleaning in positon walls, ceiling and floor all as specified and directed

Fixing only old 20 mm steel tubing and including cleaning in positon walls, ceiling and floor all as specified and directed

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed. Make: Jindal / Tata / Swastik

S&F GI tubing 20 mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed. Make: Jindal / Tata / Swastik

S&F GI tubing 40mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed. Make: Jindal / Tata / Swastik

Cutting chases, pinning in and making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n, exc.10cm girth all as specified and directed.

S&F in repair counter sunk wash basin oval shape 550x460mm fixed with waste coupling & waste pipe & accessories of size complete all as specified and directed. Make : Cat Part No 10095 of Hindware or equivalent in Cera / Parryware.

S&F in repair 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 202 or Equivalent of Jaquar

S&F 15 mm bore overhead shower of size 150x150mm single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 200 mm long (stainless steel) square shape with wall flange all as specified & directed. Make:- Cera Cat Part Not F7010506AB or Equivalent of Jaquar / Parko.

S&F in repair vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) all as specified and directed. Make : Cat Part No S3010104 of Cera or Equivalent in Hindware / Parryware.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed. Make : Cat Part No B1010106 of Cera or Equivalent in Hindware / Parryware.

S&F PVC connection 15mm size PTMT nuts of length 450 mm all as specified and directed.

M&L in repair CP Towel Rail 61 cm long all as specified and directed.

M&L in repair CP soap dish all as per cat part all as specified and directed.

S&F in repairs 15 mm bore angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed

S&F in repairs 15 mm bore concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed .

S&F in repairs 15 mm bore piller taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts all as specified and directed

M&L for PVC (SWR) multi floor trap with grating including jointing with solvent cement for diameter of 75 mm outlet all as specified and directed. Make: Prince/Supreme/Kisan/Reliance/Finolex.

S&F sinks made of stainless steel sink with draining board made out of 1 mm thick sheet for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe including 40mm waste fitting overall size 915x460mm with bowl size 410x 330x160 mm all as specified and as directed.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided all as specified and directed.

M&L PCC 1:4:8 type D2 ( using 40 mm graded crushed stone aggegate) in foundation filling and mass concrete all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) in roof, kerbs or mud stop rounded or chamfered edges all as specified and as directed.

M&L rendering 10 mm thick in CM (1:4) on fair faces of brickwork or concrete surfaces, with using liquid water proofing compound @ 200 ml per 50 kg bag of cement all as per manufracture's instructions, finished even and smooth without using extra cement all as specified and as directed. Note: WPC shall be measured and paid for seperately under relevant item.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each all as specified and directed.

S&F anodised aluminium section for doors windows, ventilator door partition including fabrication of frame shutters and fixed with necessary lugs, cleats rollers, handles, locking arrangement etc including all necessary accessories such as glazing clips, provn of AC opening and rubber beading for fixing glass beading for fixing glass panes in frame complete all as specified by Engr-in- charge. Note- (i) Glass panes will be measured and paid separetly. (ii) The quoted rate shall be inclusive of cost of rubber beading and glazing clip hinges, handle however it will not be weighted and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. Make Hindalco/indl/Jindal or equivalent

M&L 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exc 0.5 sqm in each pane frosted on one side all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples in all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described,over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary paint tint) (each coat) over a coat of pink primer including scafoldings of any hieght all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each all as specified and directed.

Taking down shutter of any description area exc 1.00 sqm but n exc 2.00 sqm each all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming styles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified.

S&F 2nd class hard wood plain, solid, straight chowkhat and frames, wrought framed, rebated on the solid rounded or chamfered, put together with glue pinned at joint all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in hold fast, bed plates and all other similar works all as specified and directed.

S&F mild steel work in hold fasts, wall ties, pintle hinges and all other similar small articles conforming to Fe-290 Gde-E-165 all as specified and directed.

S&F 35 mm thick 2nd hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides(feather edged), or of veneered particle board with commercial face venners fitted to chowkhats all as specified and directed.

S&F to chowkhats of 2nd Class hard wood Glazed and skelton shutter 30mm thick open rebated and prepared to receive glass, gauge etc with sash bars divided into square with plain chemfered or rounded mitred and rebated sash bars any member as in windows /ventilator styles and rails provided as per SSR part -I Section 8 clause 8.24 (b) all as specified and directed.

S&F 100 mm size butt hinges, heavy weight, cold rolled mild steel all as specified and directed.

S&F aluminium anodised 150 mm barrel tower bolts of extruded section all as specified and directed.

S&F mild steel 300 mm, ordinary rat tail rod pattern springs, including roler and roller plate all as specified and directed.

S&F 200 mm length aluminium anodised barrel tower bolt extruded section all as specified and directed.

S&F 300mm long aluminium alloy, anodised sliding door bolt with haps, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as specified and directed.

S&F 150 mm long aluminium handles, cast type, anodised all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint all as directed. Make : Asian - Apcolite or Berger- Luxol

S&F in repair 20 mm dia decorative fancy type SS curtain rods and all other connected works all as specified and directed.

S&F in repair 20 mm dia decorative fancy type SS curtain rod brackets all as specified and directed.

Demolition and breaking up drain pipe of any dia (Salt glazed stone ware, AC, PVC or reinforced concrete) set in cement mortar all as specified and directed

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls all as specified and directed. Note : The aboe item inculde upto any height of builidng and including necessary scafolding

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls all as specified and directed. Note : The aboe item inculde upto any height of builidng and including necessary scafolding

S&F 75mm dia PVC (SWR) bends with access doors any radius all as specified and directed.

All as per item No 75 here in before but with access door all as specified and directed.

S&F 110 mm dia PVC (SWR) bends without access doors of any radius all as specified and directed.

.All as per item No 77 here in before but with access door

S&F 75mm PVC (SWR) branch piece, single (single Y) equal or unequal all as specified and directed.

S&F 110mm dia PVC (SWR) vent cowl all as specified and directed.

Dismantling asbestos sheeting/fibre, of any type &, any gauge, thickness, roof coverings including scafoldings of any hieght all as specified and directed.

Dismantling of framed work timber in scantlings 40 sq. cm and over in section, in any position all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based trapezoidal/mangalore tile profile roofing sheets, chajjas, 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm &1072 mm respectively, profile height 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including scafoldings of any height of the bldg all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain sheet, chajjas, 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm &1072 mm respectively fixed with self tapping screws as directed by manufacturer on wooden/steel members including scafoldings of any height of the bldg all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

S&F for joist, channel, angle, or tee sections, or MS flats fixed independantly without connecting plates, etc Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work for galvalume / CGI chajjas all as specified and directed.

S&F structural steel work in tubular/square tube trusses including special shaped washer, gusset/bearing plate etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide all as specified and directed. Make:-Asian/ Berger

M&L for disconnecting existing tanks exc 1000 but n.exc 2000 ltr, setting aside ( or lowering if reqd) for repair cleaning etc and hoisting if reqd reconnecting and refixing in position all as specified and directed.

M&L for applying two coats of weather proof acrylic exterior paint (100% Acrylic) (up to four storeys bldgs) including use of scaffoldings all as specified and directed. Make : Apex Ultima or equivalent

S&F in repairs cast iron arrow, tee, bends and designs of varoius pattern as per requirement of site for gates, rails, braces, etc., complete, drilled for fixing of hooks and hinges or steel hanging door fittings also fastening, welding and fixing all as specified & directed.

M&L for preparation of newly/old plastered surfaces of walls and applying two coats Oil bound distimper over a coat of birla putty (average 2 mm thick) all as specified and directed. Make :- Asian paint (Emulsion Sparc), Berger (Rangoli) or equivalent makes.

M&L for preparation of newly plastered wall surfaces and applying a coat of wall care putty (Birla White Wall care or equivalent) 3mm thick average on plastered surfaces rubbing with sand paper, preparatory to distempering and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint all as specified and directed. Make : Asian - Tractor or Berger- Bison)

M&L for preparation of newly /old plastered celling/wall and applying three coat of white wash all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint at any height including use of scaffolding wherever required for external painting of wooden surfaces all as specified and directed.

Demolition of ceiling boards of any description, and any thickness including cover fillets and frame work all as specified and directed.

M&L for powder coated aluminium snap grid having size of 605mm x 605mm and sections incorporated in frame work shall conform to IS 733, IS 737 and IS 1285 and snap grid frame work shall be fixed to ceiling with supporting hanger 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers all as per manufacturer's instruction. The main & cross tees shall be jointed at junction/crossings with anodized aluminum angle bracket of size 19.05mm x 19.05mm x 1.45mm, weighing 0.14 Kg per RM, fixed with suitable mild steel, bolts nuts and washer all as per manufacturer's instruction, the snap grid shall be supported at ends all along the wall with anodized aluminum angle of size 38mm x 25mm x 2.18mm, weighing 0.358 Kg per running meter all as specified and directed.

S&F of 9mm thick PVC laminated gypsum ceiling tiles size of 600mm x 600mm, square edge, front side laminated PVC and back side aluminium foil all as specified and directed.

S&F aluminum tubular hallow section 50 x 25x1.5 mm not exceeding 900 mm c/c on exceeding columns/beam/ slab to hold cladding etc. and fixing Aluminium composite panel cladding plain metallic of approved colour/ shade to beam/ column/ slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour all as specified and directed.

S&F joist, channel, angle, or tee sections, or MS Flats fixed independantly without connecting plates, etc Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work for galvalume / CGI chajjas all as specified and directed.

M&L PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in coping , bed concrete and all other similar works including necessary formwork all as specified and as directed.

Ganesh Enterprises

GANGAJAL

ASHOK CONSTRUCTION

SAHU AND SAHU CO.

Unitech Enterprises

BOB ENTERPRISES

RAJU ENTERPRISES

Vandan Enterprises

Bidder Name

Unitech Enterprises

Frends Enterprises

ASHOK CONSTRUCTION

SAHU AND SAHU CO.

BOB ENTERPRISES

Vandan Enterprises

RAJU ENTERPRISES

Ganesh Enterprises

GANGAJAL