AR and MO of JSV Rest House at Dhaneta in Tehsil-Nadaun Distt Hamirpur

Providing and fixing 4 mm thick Aluminium Composite Panel (ACP) sheets of approved make and colour for wall panelling over aluminium/MS frame, including providing and fixing necessary framing sections, cleats, screws, rivets, jointing/sealant, cutting and fitting to required sizes, complete in all respects as per design, site requirements and direction of Engineer-in-Charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete in all respect including carriage of material in all leads & lifts (16103000).

Painting two coats (e/c priming coat) new concrete/masonry/asbestos cement/plastere surfaces with redymixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt ,dust and other foreign matter sand papering as required with.

Finishing wall with weather proof exterior grade emulsion of approved design(apexultima) or its equivalent on undecorated wall surfaces ( two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt dust & other foreign matter etc. including sand paper smooth complete.

Prov. laying granite stone in flooring 20 mm (average) thickness base of cement mortor 1:3 (1cement :3 sand)laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete.20mm. Thick

Providing and fixing of Stainless Steel (SS) brackets for supporting the counter, including cutting, fabrication, welding, drilling, anchoring/fixing with necessary SS fasteners and all other allied works, complete in all respects.

Providing and fixing 8 mm thick cement board of approved make on existing truss framework, including cutting, fitting, jointing and securing with self-drilling screws/necessary fasteners, complete in all respects as per site requirements and direction of Engineer-in-Charge.

Providing and fixing 4 mm thick clear glass in truss framework, including cutting to required size, fitting, glazing with suitable putty/glazing compound and necessary clips/fasteners, complete in all respects as per site requirements and direction of Engineer-in-Charge.

Providing and fixing stair railing comprising 12 mm thick toughened glass panels, supported with stainless steel SS-304 brackets, clamps and necessary fittings, with wooden handrail of approved quality fixed over SS supports, including cutting, drilling, fixing, polishing and all necessary accessories, complete in all respects as per design, site requirements and direction of Engineer-in-Charge

Providing and fixing MS sheet duct for covering and concealing existing wall-mounted water supply pipe, fabricated from 18 gauge MS sheet (1.2 mm th ), including cutting, bending, fabrication, welding, fixing with necessary MS angles/flats, clamps, screws and fasteners, applying one coat of red oxide primer and two coats of approved synthetic enamel paint, complete in all respects as per site requirements and direction of Engineer-in-Charge.