REPAIRS/REPLACEMENT OF STREET LIGHT/ SECURITY LIGHT AND CERTAIN MISC EM WORKS AT TECHNICAL AREA UNDER GE I RND RCI HYDERABAD

Amount

Supply, laying, jointing, testing and commissioning LT XLPE insulated, screened, PVC bedded, galvanised steel strip, armoured, heavy duty, electric cables of cross sectional area 3.5 Core 25 sqmm, 1100 volts grade with multistranded aluminium conductor laid in trenches/Passing through pipe/duct/road crossing or fixed on pole, walls with suitable size clamps made out of mild steel flat iron including jointing material such as lugs, brass cable glands etc including testing on completion and including taking out old unserviceable cable complete all as specified and directed. Make : RPG/KEI/Havells/Gloster/CCI Note : Excavation and Earth work, sand cushioning, GI Pipe and PCC cable covers will be measured and paid separately.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation, for laying of pipes/cables etc., and not exceeding 10Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each layer as in soil complete all as specified and as directed.

Removal of excavated soil to a distance not exceeding 50 mtrs and deposited where directed at a level not exceeding 1.5mtrs above the starting point all as directed.

M&L, Sand filling with clean, dry and sieved fine sand, unwashed including gently punning around cables, after the cables are laid in trenches for cable protection all as specified and directed. Note : Punned thickness only will be measured for payment.

Supply and lay in trenches reinforced pre-cast concrete cable covers, class LV, type-I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed.

Cutting the existing roads to a width of 45cm and 60cm in depth for laying GI pipe of 50mm bore including returning, filling in and top surface of road 15cm shall be made good with PCC 1:2:4 type B1 using 20mm graded stone aggregate, complete all as specified and directed.

Galvanised steel tube 50 mm dia, light grade with all fittings, complete, fixed to walls, pole or laid in trenches for cable protection including MS Clamps for fixing on wall / pole , etc, complete all as specified and directed

S&F 90W high efficient LED Street light fixture, single piece Aluminum Pressure Die Cast Housing( LM6 Alloy), Luminaire system efficacy >120lm/W, System Lumens 11500lm, high purity polycarbonate/glass diffuser, with silicon gaskets for IP66 (No Glue) protection, IK07, name of the company or logo must be embossed,in built electronic driver with phase to phase protection at 440V for 8 hours with high voltage cut off and auto recovery features, Metal fully potted and encapsulated driver to protect against moisture, with constant current, low/over voltage protection (Under Voltage protection : Should Survive Input Voltage Stress of 100V for 48 Hrs.) duly wired up to terminal block, surge protection 4 kV and optional 10kV within the driver compartment, IEC 60598 to be followed, driver efficiency >88%, power factor > 0.95, THD ≤10%,driver make must be as luminares LED used to be SMD LED,secondary optics is must for better light distribution,<5 MacAdam LED Type for better color matching & to avoid color shift with LED binning as per ANSI standard, ,LED must be mounted on quality MCPCB & avoid mutiple soldering and frequent failure of LED chip, LED Makes : Nichia/ Cree/ Osram/ Philips Lumiled, , colour rendering index CRI >70, temperature range 0 to 45 degree centigrade, CCT: 6500K, Lifetime of LED 50K hours @L70 B50 (As per TM21), photo biological safety report as per IEC 62471, Voltage range 120-270V AC including taking down existing street light fitting complete all as specified and directed. MAKE : Philips Model No. BRP409 LED115 CW SLA FG PSU GR V2 or techno commercially equivalent in Wipro or Crompton.

S&F 155W high efficient LED Flood light fixture, Aluminum Pressure Die Cast Housing(ADC12 alloy) alongwith mounting bracket for aiming, Luminaire system efficacy ≥120lm/W, System Lumens 18600lm, high purity polycarbonate/glass diffuser, with silicon gaskets for IP66 (No Glue) protection, IK07,name of the company or logo must be embossed,in built electronic driver with phase to phase protection at 440V for 8 hours with high voltage cut off and auto recovery features, Metal fully potted and encapsulated driver to protect against moisture with constant current, low/over voltage protection (under Voltage protection should survive Input Voltage Stress of 100V for 48 Hrs) duly wired up to terminal block, surge protection 4 kV and optional 10kV within the driver compartment, IEC 60598 to be followed, driver efficiency >88%, power factor > 0.95, THD ≤10%, colour rendering index CRI >70, temperature range 0 to 45 degree centigrade, CCT: 6500K, Luminaire and driver must be same make, LED used to be SMD LED,secondary optics is must for better light distribution,<5 MacAdam LED Type for better color matching and to avoid color shift, LED must be mounted on quality MCPCB to avoid mutiple soldering and frequent failure of LED chip, LED Makes : Nichia/ Cree/ Osram/ Philips Lumiled, Lifetime of LED 50K hours @L70 B50 (As per TM21), photo biological safety report as per IEC 62471, Voltage range 120-270V AC including taking down existing street light fitting complete all as specified and directed. MAKE : Philips Model No.BVP483 LED185 CW SWB PSU GR or Technocommercially equivalent in Wipro or Crompton.

S&F 100W high efficient LED Flood light fixture, Aluminum Pressure Die Cast Housing(ADC12 alloy) alongwith mounting bracket for aiming, Luminaire system efficacy ≥120lm/W, System Lumens 12000lm, high purity polycarbonate/glass diffuser, with silicon gaskets for IP66 (No Glue) protection, IK07,name of the company or logo must be embossed,in built electronic driver with phase to phase protection at 440V for 8 hours with high voltage cut off and auto recovery features, Metal fully potted and encapsulated driver to protect against moisture with constant current low/over voltage protection (under Voltage protection should survive Input Voltage Stress of 100V for 48 Hrs) duly wired up to terminal block, surge protection 4 kV and optional 10kV within the driver compartment, IEC 60598 to be followed, driver efficiency >88%, power factor > 0.95, THD ≤10%, colour rendering index CRI >70, tempereture range 0 to 45 degree centigrade, CCT: 6500K, Luminaire and driver must be same make, LED used to be SMD LED,secondary optics is must for better light distribution,<5 MacAdam LED Type for better color matching and to avoid color shift, LED must be mounted on quality MCPCB to avoid mutiple soldering and frequent failure of LED chip, LED Makes : Nichia/ Cree/ Osram/ Philips Lumiled, Lifetime of LED 50K hours @L70 B50 (As per TM21), photo biological safety report as per IEC 62471, Voltage range 120-270V AC including taking down existing street light fitting complete all as specified and directed. MAKE: Philips Model No. BVP192 LED110 CW HO NB FG GR PSU or Techno commercially equivalent in Wipro or Crompton.

S&F 60W high efficient LED Street light fixture, single piece Aluminum Pressure Die Cast Housing( LM6 Alloy) Luminaire system efficacy >110lm/W, System Lumens 6800lm, high purity polycarbonate/glass diffuser, with silicon gaskets for IP66 (No Glue) protection, IK07, name of the company or logo must be embossed,in built electronic driver with phase to phase protection at 440V for 8 hours with high voltage cut off and should have auto recovery features, Metal fully potted and encapsulated driver to protect against moisture with of constant current low/over voltage protection (Under Voltage protection should Survive Input Voltage Stress of 100V for 48 Hrs) duly wired up to terminal block, surge protection 4 kV and optional 10kV within the driver compartment, IEC 60598 to be followed, driver efficiency >88%, power factor > 0.95, THD ≤10%,driver make must be as luminares LED used to be SMD LED,secondary optics is must for better light distribution,<5 MacAdam LED Type for better color matching and to avoid color shift with LED binning as per ANSI standard, LED must be mounted on quality MCPCB & avoid mutiple soldering and frequent failure of LED chip, LED Makes : Nichia/ Cree/ Osram/ Philips Lumiled, , colour rendering index CRI >70, temp range 0 to 45 degree centigrade, CCT: 6500K, Lifetime of LED 50K hours @L70 B50 (As per TM21), photo biological safety report as per IEC 62471, Voltage range 120-270V AC including taking down existing street light fitting complete all as specified and directed. MAKE : Philips Model No.BRP062 LED 68 CW SLA S1 PSU or Techno commercially equivalent in wipro or Crompton

S&F 40W high efficient LED Street light fixture, single piece Aluminum Pressure Die Cast Housing( LM6 Alloy) Luminaire system efficacy ≥120lm/W, System Lumens 4800lm, high purity polycarbonate/glass diffuser, with silicon gaskets for IP66 (No Glue) protection, IK07, name of the company or logo must be embossed,in built electronic driver with phase to phase protection at 440V for 8 hours with high voltage cut off and auto recovery features, Metal fully potted and encapsulated driver to protect against moisture with constant current low/over voltage protection, (Under Voltage protection should Survive Input Voltage Stress of 100V for 48 Hrs) duly wired up to terminal block, surge protection in 4 kV and optional 10kV within the driver compartment, IEC 60598 to be followed, driver efficiency >88%, power factor > 0.95, THD ≤10%,driver make must be as luminares LED used to be SMD LED,secondary optics is must for better light distribution,<5 MacAdam LED Type for better color matching & to avoid color shift with LED binning as per ANSI standard,LED must be mounted on quality MCPCB & avoid mutiple soldering and frequent failure of LED chip, LED Makes : Nichia/ Cree/ Osram/ Philips Lumiled, , colour rendering index CRI >70, temperature range 0 to 45 degree centigrade, CCT: 6500K, Lifetime of LED 50K hours @L70 B50 (As per TM21), photo biological safety report as per IEC 62471, Voltage range 120-270V including taking down existing street light fitting complete all as specified and directed. MAKE : Philips Model no BRP062 P LED 48 CW SLC S1 PSU techno commercially equavalent in wipro or Crompton.

Note for Sl item No. 09 to 13 : Contractor has to submit genuinity of purchase from manufacturer, LM79 & LM80 certification . BIS R no. is mandatory for LED light fixtures/drivers. Fixture shall be fitted to bracket 20 to50mm dia mm as per site requirement . Quoted rate shall deemed to include cost of any accessories for propper fixing of LED fixture to bracket including hydraulic ladder or aerial acess platfrom mounted on vehicle for replacement of fitting.

S&F, bracket suitable for street light fitting made out of 40mm dia GI tube light grade 1.5m long bent to shape, fixed with necessary nuts bolts and clamps of FI size 32x6mm complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty PVC insulated aluminium conductor cable of size 4 core 4 sq mm served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed in service connections complete all as specifed and directed. Make: Havells/Plaza/Finolex/Gloster

M&L, Cleaning the steel tubular poles of 9/11 metres long of any description thoroughly with necessary cleaning agent including scrapping up of old corroded paint dirt/dust/rust carefully and applying two coats of aluminum paint over a coat of red oxide primer and writing of MES No on pole with emulsion black paint complete all as specified and directed.

M&L, Stickering of any type of street light pole with A1 graded radium strip of 100mm width three colour red, Yellow and green around the pole with 100mm gap in each strip at a distrance of 1.1 metre high from the ground level complete including white wash to the coping and marking of pole numbers with emulsion black paint complete all as directed by Engineer-in-Charge.

S&F, Electrically operated digital timer switch DIN type daily/weekly programmable every 1 minute, with backup of 6 years, 28 memory locations, current capacity 16A, weekly program, with 1 changeover (CO), total 28 programs for street light suitable to operate on 230Volts complete all as specified. Make: Indoasian, CAT No TDA43110 or equivalent in Legrand/Siemens/Schneider

S&F, ML 2, 3 pole contactor AC3 rating of 32Amps complete all as specified. Make: L&T, CAT No SS90701 or equivalent in Legrand / Siemens / ABB / Schneider

S&F, ML 4, 3 pole contactor AC3 rating of 70Amps complete all as specified. Make: L&T, CAT No SS90910 or equivalent in Legrand / Siemens

S&F, Street light control junction box of size 200 x 160 x 98mm made out of FRP sheet moulded and arrangement for incoming and outgoing 3 phase 4 wire system with R,Y,B & N studs and control for incoming and outgoing cables suitable to 4 core 25 Sqmm with MCB SP 10Amp 230 volts with neutral link including “D” clamps made up of FI 25 x 3mm, 2 Nos suitable to pole of any size including bolts nuts & washers etc., complete all as specified and directed. Make: Hensel, CAT No k 8250 or equivalent in Sintex as approved by GE Note: The unit rate quoted shall be deemed to include for incoming & outgoing cables glands & lugs of size up to 25Sqmm 4 core.

supply and fix in repairs LED driver suitable for 90W street light fittng all as directed by Eng-in-charge. Make : Philips/Wipro/Crompton

supply and fix in repairs LED driver suitable for 120W street light fittng all as directed by Eng-in-charge. Make : Philips/Wipro/Crompton

supply and fix in repairs LED driver suitable for 140W street light fittng all as directed by Eng-in-charge. Make : Philips/Wipro/Crompton

SRI SAI ENTERPRISES

CHITRA ENGINEERING CORPORATION

EXELLENT POWER CORPORATION

LITE SYSTEMS INDUS

SHRI GANESH ENTERPRISES

Shreshta Associates

UNITY ENGINEERING TRADERS

M/S GDR CONSTRUCTIONS