providing Glass partitions, Fixed glazings Additional Circuit House at Kancheepuram

Supplying and fixing of 10mm clear Toughened Glass Partition OZONE brand fixed connector Hinges, Towel bar Handle, Side Cover & magnetic profile, Water dispenser, support bar and holders, silicone, Installation with Necessary Hardware, Transport and Unloading all are included. All the materials should got approved by the Executive Engineer before use on works.

Supplying and fixing of UPVC Fixed window with 8mm clear Toughened Glass from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with Gl/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided. The corners and joints should be welded and cleaned. The glass it should not allow leakage of water even at most ranging storms. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Providing and fixing Acoustic Wall Panelling in channelled wood works perforated panels of width 192mm, thickness of 15mm and length of 2400mm or as per required by the Departmental Engineer made of a high density fibre board with minimum 725 kg./m3 density substrate with a laminated facing as per the approved shade and finish and a melamine balancing layer on the reverse side. The boards shall have a special peforation pattern where the visible surface has a Helmholtz fluted perforation of 3mm width and 21mm of visible panel each. The edges of the panels shall be tongue-and-grooved to receive special clips for installation. The back of the perforated panel shall have sound absorbing non woven acoustical fleese having NRC of 0.52. The panels shall be mounted on special aluminium splines using clips provided by Armstrong and approved by the Engineer-in-Charge.

Installation: Install aluminium box section (provided by others) of section 50mm x 25mm or as approved by the Engineer-in-Charge on the solid wall horizontally using screws and plugs at spacing of 600mm centre to centre. Screw the aluminium extruded keel for channelled wood works provided over the lowest and second aluminium section at an on centre distance of 600mm. Place the inside clip on the groove end of the panel along the aluminium keel and then place the tongue end of the next panel. Continue installing rows of panels by inserting the tongue into groove of the earlier inserted panel and progressively installing inside clips into the next keel till the actual height is achieved. Finish off the edges using wooden moulding of matching colour . Installation to be carried out by Trained Installation Team and installation should be carried out as per Recommended Procedure.

GST @ 18 %