Balance work for construction of Multi Sports Hall at Kargil

Amount

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil

Supply & filling of 2nd class sand under floors incl. spreading, levelling, wafering and conslidation and carriage complete job/

Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete. 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.

M-20 Grade. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

M-15 Grade. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Demolishing Cement concrete work manually/by mechanical means including disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.

RCC Columns

Plain Concrete work/ Blocks

Centering and shuttering including strutting, propping etc. and removal of form work for:

Foundations, footings, bases for columns

RCC Columns

Lintel Beams/ Roof beams

RCC Slab

Extra for additional height in centering, shuttering wherever required with adequate bracing, proping etc. incl. cost of de-shuttering and de-centering at all levels, over a height of 3.50M for every additional height of 1 meter or part thereof (Plan area to be measured)

12mm Cement plaster on cement concrete block masonry/ conc. surfaces incl. scaffolding charges complete for 1:6 mix (incl. water charges for mixing incl. curing)

12 mm thick plain cement mortar bands in cement mortar 1 : 4 (1 cement : 4 fine sand) Raised Sand

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

52mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 liter per 50kg of cement or as per manufacturer’s specifications, including cost of cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete. 50 mm thick with 20mm nominal size stone aggregate.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class deodar wood.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood (35mm thick)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class Kail wood (35mm thick)

Extra panelling for panelled or panelled and glazed shutters, 25mm to 40mm thick.

Providing and fixing of 4 mm thick glass panes in windows incl. cost of wooden beading & nails complete job.

Providing and fixing strips in joints of terrazzo/ cement concrete floors. Glass strips 40 mm wide and 4 mm thick

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm

Providing & fixing of Anti-skid/ non-slippery floor ceramic tiles in cement sand mortar (1:4) mix incl. jointing/ grouting with white cement and matching shade complete job.

Providing & fixing of Kail Wooden shingzak over openings i.e. Windows/ Arches etcl. Incl. cost of priming and painting complete as per instructions of engineer-in-charge.

Providing & fixing 4mm thic,k Aluminum composite panel (A.C.P) incl, cost of Aluminum frame of tubes, filling of joints with silicon of required shade and scaffolding charges complete job upto 40'-0" height (exterior)

Providing & fixing of hardware fittings of standard make incl. cost of necessary screws complete job as per instructions of engineer-in-charge.

Hinges 4"

Hinges 3"

T. Bolts 4"

T. Bolts 6"

L. Drop 10"

Handle 4"

Handle 6"

Handle 8"

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Somany, Johnson, Kajaria or equivalent make)

Providing and laying Ceramic floor tiles 300x300 mm of approved quality conforming to IS: 13755 of approved colour & shade, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete job. Toilet Block/ Wash Room/ Change Room (Somany, Johnson, Kajaria or equivalent make)

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 14 gauge)

Providing G.I. concealed pipes (C-Grade) of approved make (Prakash Surya)/ Jindal or equivalent with G.I. fittings clamps, cutting, chases and making good the wall.

15mm dia nominal bore

20mm dia nominal bore

25mm dia nominal bore

Providing and fixing of G.I. pipes of standard quality and make incl. jointing, testing complete. (Prakash Surya, Jindal or equivalnt)

25mm dia

20mm dia

15mm dia

Providing and fixing of following PVC Pipes and fittings of standard quality and make (B-type) incl. jointing, testing complete. (Finolex, Supreme or equivalent)

100mm dia

75mm dia

50mm dia

Door junctions

Door bend (75mm dia)

Floor trap (100mm)

Coller 100mm dia with rubber washer

Coller 75mm dia with rubber washer

Cowl 75 mm dia

Providing and fixing of Ball-Valve of approved quality.

25mm dia

20mm dia

Providing & fixing water closet squatting pan (W.C) Indian type Orissa Pattern White vitreous china with 100mm PVC B-Type along with “S” or “P” trap including 10 Ltr. capacity low level flushing cictern of approved make with flush pipe manually controlled devide (handle cutting & making good the walls and floors wherever required. 580 x 440mm with integral type of rest)

Providing & fixing White vitreous china pedestal type water closet of approved quality (European type WC Pan) of approved make (Hindware or equivalent) with seat and lid, 10 Ltr. capacity low level white PVC flushing cistern incl. flushing pipe with manually controlled devide (handle lever) with all fittings and fixures complete incl. cutting & making good the walls and floors wherever required. (W.C Pan ISI Marked White solid plastic seat and cover)

Providing & fixing White vitreous china flat back of wall corner type lipped front urinal basin of 430 x 200 x 350mm and 340x410x265mm size respectively with automatic flushing cistern with CI/ MS brackets standard size GI clamps complete incl. painting of fittings and brackets, cutting & making good the walls and floors wherever required. (one urinal basin wiht 5 Ltr. PVC white automatic flushing cistern of approved quality (Hindware or Cera or equivalent)

Providing & fixing White vitreous china Wash Basin Size 630 X 450mm With Pedestal Of Approved Make CP Brass Basin Mixer (Parko or Jaquar or Equivlant) make incl. painting of fittings and brackets, cutting & making good the walls and floors wherever required. (Wash Basin + Basin Mixer) complete.

Providing & fixing White vitreous Counter basin 450 x 450mm of approved make with CP Brass waste 32mm dia and waste pipe to be fixed on the granite counter (excl. c/o granite which shall be paid seperately)

Providing & fixing of CP Brass fittings of standard quality and make Parko, Jaquar or equivalent.

15mm Bib Cock with base cup (short nose)

Angle Valve

Basin Mixer

Shower Rose

Health faucet with holder

Soap dish

Floor grating (100mm)

Toilet paper Holder

Towel rod reqd. size 600mm wide

PVC connection of reqd. length of standard make.

PVC waste pipe 32mm dia of standard make.

Stainless sink standard size

Providing & fixing of looking mirror of superior glass (of approved quality) rectangular size (450 x 350mm) with plasted frame with required framing and cost of screw complete.

Providing & fixing 600 x 150 x 6mm glass shelf with edges round supported on anodized angle frame with CP brass brackets and guard rail and incl. cost of screws/ nuts & bolts complete job

Dry random rubble masonry with hard stone in foundation and plinth: With bond stone incl. cost of carriage.

Providing & fixing of water storage tank with PVC lid having locking arrangements (triple layer of approved quality) incl. making inlet/ outlet and over flow connections and fittings complete

Construction of brick-masonry/ concrete chamber (450 x 450mm) inside depth upto 450mm, RCC top slab in (1:2:4) mix foundation concrete in (1:4:8) mix inside plaster 12mm thick in 1:4 mix with finishing coat of neat cement and making channels complete incl. cost of manhole frame and cover of required size of standard quality and carriage of all materials involved complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (Medium class)

Providing & fixing of pre-coated colour CGI roofing (high-rib) fized with self drilled screws/ J or L Hooks/ washers (0.50mm thick)

Providing & fixing of cappings to ridges/ hips with 0.50mm thick incl. cost of self drilled screws/ J or L Hooks washers complete job.

Providing & fixing of 16mm dia holding down nuts & washers incl. embeded in cement concrete complete job (truss bolts)

ELECTRICAL WORKS:

Wiring for light point/Fan Point/Exhaust Fan Point/Call Bell Point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface Recessed medium class PVC Conduit with modular switch, modular base/cover plate suitable GI Box and earthling the point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for light plugs with 2x2.5 sqmm FRLS PVC Insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 1 No 2.5sqmm FRLS PVC insulated copper conductor single core cable for loop earthling as required.

Wiring for power plugs with 2x4qmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 1 No of 4sqmm FRLS PVC insulated copper conductor single core cable for loop earthling as required.

Wiring for circuits sub mains along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cables in surface recessed medium class PVC conduit as required

2x2.5 sqmm +1 No 2.5 sqmm PVC insulated copper conductor

2x6 sqmm +1 No 6sqmm PVC insulated copper conductor

2x10sqmm 1 No 6sqmm PVC insulated copper conductor.

Supplying and fixing of suitable size GI Box with modular plate and cover in front on surface are recess including providing and fixing of 3 pin 5/6 A modular socket outlet and 5/6 A modular switch connections as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface are in recess including providing and fixing 6 pin 5/6 A and 15/16 A modular socket outlet and 15/16 A modular switch connections etc as required.

Supplying and Fixing following way pre wired TP and N MCB distribution Board off steel sheet for 415 Volts on surface/Recess complete with loose wire box terminal conductors for all incoming and outgoing circuits duly pre wired with suitable size FRLS PVC Insulated copper conductor up to terminal Blocks tinned copper bus bar, neutral link, earth bar, din bar detachable gland plate, interconnections, powder painted including earthling etc as required (But without MCB/RCCB/Isolator)

Sheet Metal enclosed 6 way TPN DB complete with neutral link.

Sheet Metal enclosed 12 way SPN DB complete with neutral link.

Supply and Fixing of 6-32 AMP SP 240 Volt (C) series miniature circuit breaker (MCB) suitable for lightening and other loads in the existing MCB DB's complete with connections, testing and commissioning etc as per technical specifications.

Supply Installation Testing and Commissioning of following Double Pole MCB's with breaking capacity of 10 KA as per IEC 60947-2 and as per the satisfaction of Engineer In charge.

Supply, Installation Testing and Commissioning of Ceiling fans/Wall Fan 5 star rating complete with double ball bearing, motor bearing blades, down-rod canopies capacitor two module stepped type electronic fan regulator suitable for operation on 230V 50 HZ-1-phase A.C supply complete as required.

1200 mm sweep

Supply Installation Testing and Commissioning of 900 RPM 300 mm Exhaust Fan suitable for single Phase 230v 50Hz AC supply complete with motor louvers, shutters etc complete as required

Supply Installation Testing and Commissioning of cubical type L.T Panel Board suitable for 415 V 3 Phase 4wire 50 HZ AC supply system including incomers, outgoings, bus-bar, interlocking etc dust and vermin proof with lockable arrangement, powder coated Incomers MCCB 250 Amp 4 Pole with breaking capacity 36 KA 1No. Digital Multifunctional-meter 1 No. Indicating Lamps (RYB) 1No Current-Transformer (300/5A 10VA burden) class-1 1set Aluminum bus bar 300 Amp FP E-91 Electrolytic AL 1Sets 200 A Change over switch Panel Mount: 1 No. Out-Goings MCCB 63 Amp TPN with Breaking capacity 10 KA 2No's MCB 63 Amp DP with Breaking capacity 10 KA 8 No's Load Bearing Member to be made out of 165 WG CRCA sheet Partition to be made out of 165WG CRCA sheet Gland Plates to be made 16 SWGmm thick complete job.

Earthling with G.I Earth Plate 600 mmx600mmx6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangements and watering pipe of 2.7 meter long etc with charcoal/coke and salt as required.

Providing & Laying of 25mmx5mm G.I strip FPR earting in 40 mm dia pipe FRL earth Electrode including connections with brass nuts, bolts spring washers etc,excavation,refilling as required.

Supply and Installation of Integral LED 4 ft luminary with CRCA housing and PC Glossy cover. The luminaries should have a color consistency SDCM <5, CRI >80 and CCT of 6500K.The luminaries shall be compliant with IP 20 classification.Luminarie shall be compliant with IP 20 classfication.Luminarie shall be designed to emit atleast 4000 nominal lumens at a system efficacy of atleast 115 lumens/watt with a maximum wattage of 34 watts.The luminare shall be designed so as to ensure lumen deprication of upto 30% over 50K burning hours @ design ambient temp 45 deg C. The electrocnic driver used shall heve a power factor>0.95 and THD < 10% and suitable for an operating voltage range of 140-270 V AC. The LED driver should comply to IEC 61000-3-2,2009 for harmonics,IEC 61347-2-13<2006 in conjuction with IEC61347-1 ed.2.0,2007 for electrical safety,IEC62384 ed 1.1,2011 for performance and IEC 61547 ed 2.0,2009, CISPR-15 for EMI.Manufacturer shall have inhouse Lab approved by NABL or Ministry of Science of Govt, of India. LM79 & LM 80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters.

Supply Installation of Led Indoor (Surface/Recessed) Downlighter suitable for general lightining.Luminarie with CRCA body and poly carbonate cover with diffused optics.The luminarie should have CRI>80 and CCT of 3000K/4000K/6500K. The luminarie shall be compilant with IP20 classification.The fixture should have a minimum shstem efficacy of 100 lumens/watt and a minimum system lumen output of 1200 lumen and a maximum system wattage of 12 watts.The luminarie shall be designed so as to ensure a lumen deprication of upto 30% over 50K burning hours@ design ambieent temp 45 deg C. The electronic driver used shall have a power factor >0.95,THD<10%. The fixture should comply to IEC 61000-3-2,2009 for Harmonics,IEC61347-2-13<in conjuction with IEC61347-1 ed.2.0,2007 for electrical safety,IEC62384 ed 1.1,2011 for performance and IEC 61547 ed 2.0,2009,CISPR-15 for EMI.Manufacturer shall have inhouse Lab. approved by NABL or Ministry of Science of Govt of India. LM79 & LM80 reports need to be submitted from NABL/UL accredited lab to verify above paramete.

Supply Installation of Integral LED 2ft Luminaries with extruded aluminum housing with PC cover. The Luminaries should have a color consistency SDCM<5,CRI>80 and CCT of4000/65000K The luminaries shall be compliant with IP20 classification. The fixture should have a minimum system efficacy of 100 lumens/watt and a minimum system lumen output of 1200 lumen and a maximum system wattage of 12 watts. The luminaries shall be designed so as to ensure a lumen deprecation of up to 30% over 50K burning hours@ design ambient temp 45 deg C.The electronic driver used shall have a power factor>0.95,THD<10%.The fixture should comply with the parameters as per ISI 0322.The LED driver should comply to IEC IEC 61000-3-2,2009 for Harmonics, IEC 61347-2-13<2006 in connections with IEC 61347-1 ed.2.0,2007 for electrical safety ,IEC 62384ed 1.1.2011 for performance and IEC 61547 end 2.0,2009,CISPR-15 for EMI. Manufacture shall have in house lab. Approved by NABL or Ministry of science of Govt.LM79 and LM80 reports need to be submitted from a NABL/UL accredited Lab to verify above parameter.

Supply Installation of Integral high quality integrated LED flood Light with a minimum system Lumen of 23500LM and system wattage not exceeding 195W with a nominal efficency 120 Lumen/watt.CCT of 6500K with SDCM of <5 and CRI ;70.the hosing should be of non-corrosive high pressure die-cast almunium to with stand etreme environments with PF>0.95.Liftime of 50K hours @L70.The Ingress protection should be minimum IP66 with an IK rating of 09.The Luminaire should have a 10 KV/10KA SPD duly bolted in the luminaire. The SPD should be able to sustain a mimimum 15 hits of 10 KA ratingi-e Total of 45 hits across all the three modes as per IEEE 62.41.2.The luminaire should be capable of withstanding voltage stress of 440V for 8 Hrs,should have an auto shutdown@ 325V and have an auto recovery feature.The Drivers should be a potted driver not a printed circuit board without casing,mounted inside the luminaire.

Laying of one number PVC insulated and PVC sheathed/XLPE Power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required.

Abve 95sq.mm and upto 8f185 sqmm.

Supplying and making end terminal with brass compression gland and alminium lugs of following size of PVC insulated and PVC sheathed/XLPE aluminuim conductor cable of 1.1 KV grade as required.

3½x150sq.mm

Supplying of cables for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required.

3½x150sq.mm

Supplying and Fixing following size/modules.GI box alongwith modular base and cover plate for modular switches in recess etc as required.

1 of 2 Module (75mmx75mm)

3 Module (100mmx75mm)

4 Module (125mmx75mm)

6 Module (200mmx75mm)

Supplying and Fixing following modular base and cover plate on existing modular metal Boxes etc. as required

1 or 2 Module

3 Module

4 Module

5 Module

Supply and Laying of following dia PVC conduit B class 2mm thick alongwith accessories recess/surface including cutting of walls and making good the same

25mm dia

32mm dia

Supply and fixing of 50 Liter Geyser's

Supply Instalation Testing of 1 Horse power Motors

Note: The rates are inclusive of all carriage of materials complete with lifts and cost of water for mixing and Curing purposes.

M/S ALTAF CONSTRUCTION CO.