Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.0 LAccepted-AOC | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹29.2 L+₹1.6 L (5.65%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest bidder | |
| 3 | L3₹29.4 L+₹1.7 L (6.28%)Rejected-Finance H NO 411 SECTOR 4 CHANNI HIMMAT JAMMU 180015 J K | JAMMU | JAMMU | J K | 180015 | L3 | Rejected-Finance Being other than lowest bidder | |
| 4 | L4₹29.6 L+₹1.9 L (6.89%)Rejected-Finance C 49 B RADHA GARDEN MEERUT 250001 UP | MEERUT | MEERUT | UTTAR PRADESH | 250001 | L4 | Rejected-Finance Being other than lowest bidder | |
| 5 | L5₹32.4 L+₹4.8 L (17.2%)Rejected-Finance | L5 | Rejected-Finance Being other than lowest bidder |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
2 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 865 EWS
GE 865 EWS, PIN-913 865 C/o 56 APO
REPAIR REPLACEMENT OF FLOORING PLASTERING ROOFING AND MISC BR WORKS TO BLDG OF SECTOR B UNDER AGE BR II OF GE 865 EWS
2022_MES_530267_1
865/EWS(NIT-52)/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE 865 EWS
As per tender documents and as per policy in vogue
9 documents required · 9 mandatory
₹500
GE 866 EWS
₹80,000
Yes
20 Jul 2022
11 Jun 2022
4 Jul 2022
11 Jun 2022
2 Jul 2022
25 Jun 2022
Amount
Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and Removing demolished material to a distance and depositing out site of MoD land Where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge.
M/L Cement concrete 1:3:6 type C1 using 20mm graded stone crushed aggregate in plinth protection, 75mm thick, finished even and smooth using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
M&L for 25mm thick PCC type B-0 using 12.50 mm graded crushed stone aggregate as in sub base for laying floor finishes complete all as specified and directed.
M & L Non-Skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in Cement Mortar 1:4 for laying floor finishes complete all as specified and directed. MAKE: KAJARIA/H&R JOHNSON/CERA/ NITCO/SOMANY
M&L for (450mmx350mmx 7mm thick ) coloured glazed ceramic tiles on vetical surfaces set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments.(Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) incl 10mm thck screed bed below tile for dado/skirting CM 1:4. complete all as specified and directed. MAKE: KAJARIA/H&R JOHNSON/CERA/ NITCO/SOMANY
M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in floors cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20 mm thick cement screed bed in CM 1:4, incl dismantling of stone slabs of any description complete all as specified and as directed.
M & L vitrified cearmic tiles 10 m thick (double charged ) square /rectangular polished area of each tiles exc 0.36 sqm but not exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colours of tiles including 15 mm thick screed bed and bedding layer in CM 1:4 for laying floor finishes complete all as specified and directed.all as specified and directed. MAKE : KAJARIA/H&R JOHNSON/CERA/ NITCO/SOMANY
M & L vitrified cearmic tiles 10 m thick (double charged ) square /rectangular polished area of each tiles exc 0.36 sqm but not exc 0.42 sqm on vertical doado/skirting cutting as required size etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colours of tiles including 10 mm thick rendering in CM 1:4 for laying floor finishes complete all as specified and directed.all as specified and directed. MAKE : KAJARIA/H&R JOHNSON/CERA/ NITCO/SOMANY
S&F 0.63 mm thick corrugated Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 including dismantling plain or corrugated steel sheeting any guage thickness including nanital or similar pattern complete all as specified and directed. Make : SAIL/TATA/JSW STEEL
Fixing only galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc., including dismantling plain or corrugated steel sheeting any guage thickness including nanital or similar pattern complete all as specified and directed.
S&F 0.8mm thick plain Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 indlucing dismantling palin or corrugated sheeting any gauge thickness including nanital or similar pattern complete all as specified and directed. Make : SAIL/TATA/JSW STEEL
Prepainted colored profiled/corrugated Galvalume/Zinc coated steel sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy mettalic coating 550 MPA yield stress as per AS-1397), as in roof covering/cladding to wall fixed with self tapping screws colour/exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling/self-tapping fastener (12-14 x 55 with EPDM seals) including dismantling plan or corrugated any description complete all as specified and directed by Engr-in-Charge Make : Tata Blue Scope Steel Ltd/JSW Steel Ltd/CRIL
Prepainted colored plained Galvalume/Zinc coated steel sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy mettalic coating 550 MPA yield stress as per AS-1397), as in roof covering/cladding to wall fixed with self tapping screws colour/exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling/self-tapping fastener (12-14 x 55 with EPDM seals) indlucing dismantling palin or corrugated sheeting any gauge thickness including nanital or similar pattern complete all as specified and directed by Engr-in-Charge. Make : Tata Blue Scope Steel Ltd/JSW Steel Ltd/CRIL
Strutural tubular steel truess as in purlin, rafter,stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. conforming to Fe 410-W (Gde-E- 250) quality-A,including dismantling structural steel work of any description in any position, complete all as specified and as directed by Engineer-in-Charge. Make and Procurement: All as specified in PS clause No 8 of tender documents.
Preparation of new or previously untreated steel or steel based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of red oxide or zinc chrome primer complete all as specified and directed by Engineer-in-Charge.
M&L for rendering 15mm thick rendering in cement mortar 1:6 on fair faces of brick walls or on concrete surfaces, finished even and smooth without using extra cement including taking down cement plaster of any description on brike or stone walls and disposed out of defence land in complete all as specified and as directed
M&L for 15mm thick rendering in CM (1:4) on other than fair faces of brick work or stone masonary work, including finishing the surfaces with even and smooth without using extra cement including taking down cement plaster of any description on brike or stone walls and disposed out of defence land complete all as specified and directed.
M&L for two coats cement base paint on newly plastered surfaces of wall including preparation of surfaces including curing before and after applying each coat complete all as specified and directed.
Preparation of newly plastered surfaces of walls and applying two coats of distempering with oil emulsion distemper white or any tinted on walls with a coat or more coat of wall care putty till the surface smooth includung a coat of primer complete all as specified and directed by Engr-in-charge.
HIMANSHU TRADERS
Mehar Enterprises
M/S Praveen Kumar and Sons
BETONG BUILDERS
M/S LEO TRADERS
SONAM ANGCHOK
M/S MUNEER HASSAN AKHON
Rampal Singh Contractor
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .