SPECIAL REPAIR AND PROVN OF TOILET AT BLDG NO. P 1 OF HQ CWE BATHINDA OFFICE COMPLEX AT BATHINDA MIL STN

Amount

Excavation in trenches, not exceeding 1.5 metres wide and not exceeding1.5 mtrs in depth for foundations etc and getting out in any type of soil.

Returning, filling in, including spreading, levelling, watering and well ramming of soil in layers not exceeding 25cm thick.

Removing excavated soil to a distance not exceeding 50 mrtres and depositing where directed at a level not exceeding 1.5 m above the starting point.

Spreading and levelling of soil in layers not exceeding 25 cm thick including well ramming and watering as required.

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified .

M & L for hard core of gauge not exc 63mm, deposited, spread, and levelled in layers not exc 15cm thick, watered and rammed to a true surface using broken bricks complete all as specified.

M&L for 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete (1:2:4) type B0 complete all as specified.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified in Preamble 8B.3.1 of SSR Part -II (2010) and all as shown on drawing of SSR Part-II (2010) complete all as specified.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement all as per instruction and drawing shown for item No 8080 of SSR Part II complete all as specified.

M&L for water proofing treatment over RCC slab by applying oil bound bituminous primer @ 0.30 kg/Sqm and applying a coat of blown bitumen of any penetration apply hot @ 1.70 Kg/ Sqm and providing, laying 3 mm thick APP modified water proofing memberane weighing not less than 3.50 kg/sqm, reinforced with non woven polyester reinforcement matt weighing not less than 160 gm/Sqm polyester core, having soften point not less than 150°C, longitudinal tensile strength not less than 650 N/ 5 cm, tearing strength of 180 N, torch application, side overlap 75 mm and end overlap 100 mm and tucked into the chases including ponding test including taking down existing roof treatment all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer in cement mortar (1:3) on roof surfaces parapet or vertical beam surface (horizental or vertical) finishing the surfaces even and fair complete all as specified.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces / stone masonry in cement mortar (1:6), finishing the surface even and smooth without using extra cement complete all as specified.

M&L for rendering 15 mm thick in cement mortar (1:4) on external wall surfaces of brick work or concrete surfaces even and fair without using extra cement mixed with liquid water proofing material as per manufacturer's instruction complete all as specified. (Liquid water proofing material shall be measured and paid for separately.)

Supply only liquid water proofing material as per manufacturer's instruction.

M&L for rendering 5 mm thick in cement mortar in (1:3) finishing the surfaces even and smooth on ceiling complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified.

M & L for vitrified ceramic tiles, 9 to 10 mm thick (square / rectangular), dark shade, polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles. (Screed bed shall be measured and paid for separately) including M&L for 15 mm thick Screed bed or bedding layer in CM (1:6) complete all as specified.

M & L for vitrified ceramic tiles, 9 to 10 mm thick (square / rectangular), light shade, polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles. (Screed bed shall be measured and paid for separately) including M&L for 15 mm thick Screed bed or bedding layer in CM (1:6) complete all as specified.

All as per item No 18 & 19 above but in vertical surfaces such as steps , riser , skirting, dado and pillars as directed at site including 10 mm thick rendering as backing coat in cement mortar (1:4) complete all as specified.

M & L for non skid coloured ceramic tiles of size minimum 400mm x 400mm, 7 to 8 mm thick (square/rectangular), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile with including 15 mm thick Screed bed or bedding layer in CM (1:6) complete all as specified.

S&F glazed ceramic coloured tiles 450 x 300 mm, 7 to 8 mm thick in verticle surfaces such as dado / skirting, set and jointed in neat cement slurry and pointed in white or coloured cement pigmented to the match the shade of tiles laid over and including 10 mm thick rendering in cement mortar (1:4) as backing coat and finish the surface rough to receive the tile.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar complete all as specified.

M&L for marble work (black marble) 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and roundening to the edge of stone slabs on edges including M&L for 15 mm thick Screed bed or bedding layer in CM (1:6).

M&L for granite (of any type) work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, dado/skirting and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including M&L for 15 mm thick Screed bed or bedding layer in CM (1:6) complete all as specified.

M & L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate in filling in chowkats/ door frame or bed block of hold fast and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete.

M&L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified.

M&L for machine pressed precast interlocking paver block with grey cement and no pigment, factory made, any shape and size, conforming to IS 15658-2006 of 60 mm thickness, made out of M-35 grade concrete laid over and including 25 mm thick layer of sand cushioning complete all as specified.

Dismantling of interlocking paver block in any description and refixing of the same to a distance not exc 300 mtr laid over and including 25 mm thick sand cushioning as directed by Engr-in-Charge.

Demolition of PCC in ground floors and pavings not exc 15cm thickness (below or above ground level).

Demolition of RCC of any description and in any position not otherwise specifically provided for, (reinforcement cut as required to facilitate demolition).

M&L for 75 mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finishing the surface even and smooth without using extra cement complete all as specified.

M & L for reinforced cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, deck slabs and in shelves and the like, finished exposed surface fair and even all as specified. (Reinforcement and form work shall be measured and paid separately)

M & L for reinforced cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate in beams, cantilevers, lintels and the like, finished exposed surface fair and even all as specified. (Reinforcement and form work shall be measured and paid separately)

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) for flat rough surfaces of concrete.

Use and waste of formwork to sides and soffits of roof beams, lintels, cantilevers and similar work (horizontal or sloping) for flat rough surfaces of concrete.

M & L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

All as per item No 37 above but 6 to 8 mm dia as in stirrups, spacers and binders .

M&L for preparation of newly plastered or unplastered surface and applying three coats of white wash on ceilings.

M&L for preparation of newly plastered or unplastered surface and applying three coats of white wash on walls.

M&L for one coat of white wash including preparation of old surfaces plaster of ceiling.

M & L for preparation of newly plastered surfaces of internal walls and applying the following:- (i) Applying wall care putty in two coats on wall surfaces & smoothening the surface with sand papers/ mechanized sanding etc (preparatory to paint as directed) complete all as specified. (ii) Two coats of 100% acrylic emulsion paint by using airless spray/ roller over and including a coat of acylic internal primer. Note :- Contractor may use manual tools for surface preparation with prior approval of Engg- in- charge in writing in case use of mechanical equipments are not possible.

Complete removal of existing treatment on wall (any number of layears) by scrapping with steel wire brushes or any other means, including filling depressions of scrapped surfaces and M & L for preparation of old plastered surfaces of internal walls and applying the following:- (i) Applying wall care putty in two coats on wall surfaces & smoothening the surface with sand papers/ mechanized sanding etc (preparatory to paint as directed) complete all as specified. (ii) Two coats of 100% acrylic emulsion paint by using airless spray/ roller over and including a coat of acylic internal primer. Note :- Contractor may use manual tools for surface preparation with prior approval of Engg- in- charge in writing in case use of mechanical equipments are not possible.

M & L for preparation of newly plastered surfaces of external walls and apply two coats of Cement base paint over a coat of alkali resistant primer over two coat of wall putty all as specified.

M & L for preparation of old plastered surfaces of external walls and apply two coats of Cement base paint over a coat of alkali resistant primer all as specified.

M & L for painting to new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces.

Demolition of brick work masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and pre cast concrete articles.

M & L for Brick work using old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6).

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each and removing from site including cutting holes for removal of hold fast complete.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each and removing from site including cutting holes for removal of hold fast complete.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each and re-fixing in the same opening including easing and adjusting including renewal of unserviceable screws etc complete.

S&F FRP door frame of size 90mm x 45 mm with inner core of treated and seasoned rubber wood and outer core of average 2mm thick FRP with gel coat finish and with average weight of 4 Kg per RM all as directed.

S&F FRP door shutter 30mm thick are to be made with 3mm FRP unsaturated polyester resin moulded to 3mm FRP laminate for forming hollow rails and styles suitably rebated and seasoned rubber wood are to be filled inside at required places for fixing of fitting cast monolithically with 5mm thick FRP laminate for panels with gel coat finish and with average weight of 8 Kg per Sqm all as per IS-14856-2000 complete all as specified.

S & F 125 mm extruded aluminium alloy handles, fabricated type, anodised.

S & F 150 mm extruded aluminium alloy handles, fabricated type, anodised.

S & F 200 mm long aluminium anodised, barrel tower bolts of extruded section.

S & F 150 mm long aluminium anodised, barrel tower bolts of extruded section.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type), and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, length of bolt 250mm.

S & F butt hinges, stainless steel heavy duty 125 mm long complete all as specified.

S & F MS framed work such as grills, gratings, guard bars etc., with end of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290 Gde E-165 including dismentling old MS frame work complete all as specified.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour as approved, having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified.

S & F MS framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc, not exceeding 10 Kg each brackets, conforming to Fe 290 Gde E-165.

S & F in repairs door closer hydraulically regulated, designation No 3, universal type, aluminium (extruded section) body, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.

S&F powder coated (minimum thickness of coating 50 micron ) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F aluminium alloy powder coated glazed door including shutter fixed to openable frame and channel as directed and as per IS specifications including handles, tower bolt, floor spring heavy duty, locking arrangement Godrej make rubber gasket and door stopper complete. (minimum thickness of power coating shall be 50 micron) with following sections of Jindal or equivalent make of Hindalco or Indal. (a) Door shutter top- Section No. 19505 of size 95.25 x 25.4 x 2mm weighing not less than 1.51 Kg per mtr (b) Door shutter bottom - Section No. 19517 of size 150 x 25.4 x 3.1mm weighing not less than 2.376 Kg per mtr (c) Door shutter vertical - Section No. 19550 of size 85 x 44.45x 1.56mm weighing not less than 1.139 Kg per mtr (d) Door shutter middle - Section No. 19564 of size 100 x 44.45 x 2mm weighing not less than 1.603 Kg per mtr (e) Glazing clips - Section No. 19352 weighing not less than 0.097 Kg per mtr Note :- Door frame will be measured and paid separatly under item No. 64 above.

S&F factory made powder coated aluminium window and ventilator shutters, side hung type without sash bars with including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21, 100mm long (2 nos.) suitable handle (1 no.) complete all as specified. (minimum thickness of power coating shall be 50 micron) with following sections of Jindal or equivalent make of Hindalco or Indal. (a) Mullion - Section No. 20941 of size 59 x 33 x 2.10 mm weighing not less than 0.851 Kg per mtr (b) Shutter with glass - Section No. 20509 of size 38.5x33 x 3 mm weighing not less than 0.663 Kg per mtr (c) Glazing clips - Section No. 19352 weighing not less than 0.097 Kg per mtr Note :- Door frame will be measured and paid separatly under item No. 64 above.

S & F sheet glass, 5 mm thick palin/tinted (colour) in square exceeding 0.5 Sqm in each pane.

S&F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580mm x 440mm, white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor and excluding flushing cistern, flush pipe and waste pipe complete all as specified.

S & F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC flushing pipe 32mm dia 900 mm long complete.

S & F PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC flushing pipe 32mm dia 900 mm long complete.

S&F in repairs, brass chromium plated tubular towel rail, 20 mm dia, D type, 600 mm long between flanges fixed with CP screws and wooden cleats.

S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 450 mm long between flanges fixed with CP screws and wooden cleats.

S&F in repairs soap dish, chromium plated decorative type, approximate size 160 x 160 x 90mm, fixed to plugs with chromium plated brass screws.

S&F soap dish, chromium plated decorative type, approximate size 160 x 160 x 90mm, fixed to plugs with chromium plated brass screws.

S & F in repairs, PVC connections 15 mm bore, 600 mm length, heavy duty, with PTMT nuts.

S & F PVC connections 15 mm bore, 450 mm length, heavy duty, with PTMT nuts.

S&F in repairs 100 mm dia cast iron floor trap with grating incluing jointing to waste pipe fixed in cement concrete (1:2:4) type B-1, complete all as specified.

S&F 100 mm dia cast iron floor trap with grating incluing jointing to waste pipe fixed in cement concrete (1:2:4) type B-1, complete all as specified.

S & F 100mm dia cast iron traps 'P' or 'S' as in repair.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal from site complete all as specified.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal from sitecomplete all as specified.

M & L for 15 mm bore GI pipe, medium grade, ISI marked, with all fittings and fixed complete to walls and ceilings or laid in floors complete.

M & L for 20 mm bore GI pipe, medium grade, ISI marked, with all fittings and fixed complete to walls and ceilings or laid in floors complete.

M & L for 25 mm bore GI pipe, medium grade, ISI marked, with all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down 25 mm bore existing steel tubing and connections complete.

M & L for 25 mm bore GI pipe, medium grade, ISI marked, with all fittings and fixed complete to walls and ceilings or laid in floors as in over flow pipe complete.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting exceeding 10cm but not exceeding 20cm girth in brick walls complete all as specified.

S&F as in repairs , 15 mm bore chromium plated, fancy type, quarter turn, bib taps cast copper alloy with crutch or butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F 15 mm bore chromium plated, fancy type, quarter turn, bib taps cast copper alloy with crutch or butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F as in repairs angular stop valves, cast copper alloy, fancy type, quarter turn, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe.

S&F stop valves, cast copper alloy, fancy type, quarter turn, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe.

S&F as in repairs, 15 mm bore chromium plated, fancy type, quarter turn Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified.

S&F 15 mm bore chromium plated, fancy type, quarter turn Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified.

S&F gun metal, globe or gate valves, heavy duty, with iron wheel head, screwed both ends for iron pipe of 20 mm bore dia complete all as specified.

M & L for 150 mm x 150mm salt glazed stoneware gully traps, square or round moulded, type 'P' complete all as specified.

S&F as in repairs ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule of 15 mm bore dia complete all as specified.

M & L for prelaminated particle board, 18/19 mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, ISI marked, fixed with screws to timber frame work complete fixed in any position with rails including fillets complete.

M&L for 18 / 19 mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both faces, fixed with screws to timber frame-work.

S & F as in repairs floor door stopper of aluminium alloy body, and tongue, ISI marked, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm.

S & F as in repairs grating doom 125mm dia with waste hole of PTMT (minimum weight 40 gm).

S&F as in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete.

S&F 1000 litres capacity Rotational moulded polyethylene in white colour, three layered, water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old water tank of any size and any type and removing from site etc all as directed.

All as per item No 103 above but capacity of tank 500 litres.

S & F in repairs vitreous china wash hand basin, white, of size 550mm x 400mm , excluding waste, chain and plug and porcelain stopper but including 32 mm dia waste coupling fancy type chromium plated, and PVC waste pipe of 32 mm dia and mild steel angle iron brackets and fixed all as directed complete .

S & F vitreous china wash hand basin, white, of size 450mm x 300mm , counter sunk in granite slab complete including waste, chain and plug and porcelain stopper. 32 mm dia waste coupling fancy type chromium plated, and PVC waste pipe of 32 mm dia and mild steel angle iron brackets and fixed all as directed complete .

S&F in repairs vitreous china urinal, half stall type, white with and including fixing plugs, bedding urinal against wall in CM (1:2) securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, S&F automatic flushing cistern with brackets and spreader, flush pipe, grating and union for discharge pipe complete. Jaquar Cat Part No. URS -WHT 13259 or equivelent as approved by GE.

S&F Hollow PVC wall lining consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as per specifications and drawings in SSR Part -II (2104) (PVC fillets and PVC strips shall be measured and paid separately).

S & F aluminium anodised snap grid frame work 605mm x 605mm for false ceiling comprising of main / cross tee / wall angle weighing not less than 0.36 Kg/RM to be fixed to ceiling with 6mm dia GI wire supporting hanger upto 1200mm length adjusting level fixed to roof slab at 600 mm c/c by means of 'J' bolt with necessary bolt , nuts and washers or expansion hold fasteners 12.5mm dia and 40 mm long as per manufaturer's instruction including M & L for 12 mm tapered edge gypsum board of size 600 x 600mm (conforming to IS-2095-1982) shall be screw fixed to ceiling section with 25 mm dry wall screws at 230 mm centre to centre , screw fixing shall be done mechanically either with screw driver or drilling machine with suitable attachment and finally the boards shall be jointed and finished so as to have a flush look including dismantling of old false ceiling of any type / any size complete all as specified.

M&L for double layer POP false ceiling of approved design all as specified and directed.

S&F 5 mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame all as per specifications and drawings in SSR Part -II (2010).

S&F in repairs vitreous china wash down water closet pan (EWC), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc and including flushing cistern and white coloured plastic seat cover and mild steel chromium plated or aluminised hinging device complete.

S&F vitreous china wash down water closet pan (EWC), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc and including flushing cistern and white coloured plastic seat cover and mild steel chromium plated or aluminised hinging device complete.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets and removing from site.

S&F PVC (SWR) 110mm bore pipes single socketed, ISI marked, in any length with rubber ring joints, fixed to walls including taking down old pipes and fittings.

S&F PVC (SWR) 110mm bore bends of any radius.

M&L brass letters or figures (Block Roman, Italic or Indian) n exc 50 mm width and 30 cm hight including dismantling old brass letters of any type all as specified and directed.

S&F in repairs curtain rod (conduit) stainless steel decorative type of dia not less than 25mm including fancy type finials and brackets fixed to walls with rawl plugs and steel screws complete.

M & L for salt glazed stoneware drain pipes, grade 'A', laid in trenches and jointed complete for 150mm internal dia of pipe complete all as specified.

M & L for concrete bed to 150 mm bore dia of drain pipes including packing under, and haunching against the sides of the pipes after they are laid and tested; in PCC (1:4:8) type D2 using 40mm graded stone aggregate complete all as specified.

Cutting into existing manholes, sump for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete (1:2:4) type B-1 smooth finished, and reforming benching as required for 100mm dia pipe complete all as specified and as directed.

M&L glazed ceramic coloured digital tiles of size 450 x 300 x 07 to 8 mm of vertical surfaces as in dado, skirting etc set and joined in neat cement slurry over and including 10 mm thick plaster 1:4 cm pointed with white/ coloured cement to match design and clolur approved by Engr-in-Charge complete all as specified.

S&F in repair sunmica lamination sheet of thickness 1mm to 1.5 mm, laid over on tables top and sides fixed with adhesive as per manufacturer instructions colour approved by Engr-in-Charge.

M&L for sign boards of acrylic sheet 3D view of (HQ CWE BATHINDA) fixed with frame work board of size 6 mtr x 0.60 mtr x 0.30 mtr each letter size 0.30 mtr x 0.050mtr x 0.050 mtr and arranged with LED lights, acrylic sheet colour approved by Engr-in-Charge.

Internal Electrification

Taking down carefully existing unserviceable copper / aluminum point wiring (light, fan, socket) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, light fittings etc including concealed conduit and sunken boxes and removing the retrieved materials from site including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and directed.

M & L for point wiring with multi stranded copper conductor FRLSH cable, 1100 volts grade PVC insulated and unsheathed of size 1.5 Sqmm single core in and including PVC concealed conduit not less than 20mm dia ( medium duty ISI marked) and conduit fittings with and including 3 mm thick bakelite laminated sheet top cover for one fan / light controlled by one switch including provision of 1.5 Sqmm PVC insulated & unsheathed with single core, multi stranded copper conductor FRLSH cable as earth wire to common earth & connecting to earth dolly all as specified and directed.

All as per item No 127 here in before but for socket outlet 5 pin, 6 Amp on same board complete all as specified.

All as per item No 127 here in before but for socket outlet 5 pin, 6 Amp on independent board but not below the switch board complete all as specified .

All as per item No 127 here in before but for one socket outlet 6 pin, 6/16 Amp multipurpose 2 in 1 on independent board with cable of 2.5 Sq mm, multi stranded copper conductor FRLSH cable including provision of 2.5 Sq mm PVC insulated solid copper conductor FRLSH cable continuos as earth wire connected to earth dolly, conductor etc.

All as per item No 127 above but for bell/ buzzer .

S & F Switch, flush type, single pole, one way, 5/6 Amp .

S & F Switch, flush type, single pole, one way, 15/ 16 Amp .

S & F socket, multipurpose, 2 in 1, 5 Pin, 6 Amp, flush type. (Note: Switch and socket shall be of same make.)

S & F socket outlet universal, multipurpose, 2 in 1, 3 Pin 6 Amp and 6 pin 16 Amp, flush type. (Note: Switch and socket shall be of same make.)

S&F, fan regulator electronic step type (1-5), socket type 230-240 Volt, AC supply, complete all as specified and directed.

S & F ceiling rose, 3 plate, surface bakelite type, Polycorbonate body, 6 Amps, 250 Volts AC, 65 x 50 mm, three terminal (ISI marked) complete all as specified.

S & F Lamp holder of PVC/Polycarbonate type with back plate suitable for batten fitting including 9 watt LED bulb complete all as specified.

M & L in replacement of earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground to depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel including GI protection pipe 15mm dia light grade upto the extent of 7.5 metre and connecting to earthing test point, main switch board including GI pipe 20 mm dia light grade for watering, MS funnel and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting including PCC earth pit with PCC 1:2:4 type B-1 using 20mm graded stone aggregate and RCC pit cover including necessary earthwork and excavation in any type of soil complete all as specified as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note :- (a) PCC chamber shall be constructed at least 1.5 m away from earth pit. Pipe for watering shall be provided in slanting manner. (b) 4mm dia GI wire and 15mm dia light grade GI protection pipe upto 7.5 metre shall deemed to be included in quoted rate.

M & L for sub main wiring with 2 single core cable PVC insulated unsheathed of copper multi strandard conductor FRLSH cable of size 4 sqmm, 1100 votls grade drawing through in and including PVC concealed conduit 20 mm dia medium duty including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 4 sqmm unsheathed multistranded FRLSH copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface etc including taking down old unserviceable wiring 6 Sqmm complete all as specified. Note:- Two runs of cable, one run of earth wire and one run of PVC conduit shall be measured as one unit.

S&F electric / electronic bell, ding dong type, 230 Volt, AC supply complete all as specified.

S&F recessed LED ceiling lite with wide light window for maximized glare free output suitable for 600x600mm and ceiling cutout 595x595mm modular grid/POP ceiling complete fitting with separate electronic driver and high brightness SMD LEDs 36 watt, 6000K including connecting electric connection, including taking down existing old fitting any type complete all as specified. Cat Part No. LDTLBK-36W-CDL of Crompton Greave or equivalent in Philips/ Wipro/ Bajaj/ Syska/GE/ Osram/Siemens.

S&F new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP 66 roadway luminair with high power LED of 25 watt toughened glass complete with GI bracket (01 No) MS clamps (02Nos) suitable for security light fitting fixing to wall/column & electrical connection to the light fitting providing 1.5 mtr long twin core round copper conductor cable of suitable size and testing compete all as specified.Cat Part No. SSK- SLF-CF -25W-WL of Syska or equivalent in Philips/ Wipro/ Bajaj/ GE/ Osram/Siemens.

S&F recessed ceiling mounted pressure die-cast aluminium luminair in powder coated white finish in square panel with optomized heat sink for efficient heat dissipation and separate replaceable electronic driver with LED 18 Watt , 6000 K including connecting electric connection, including taking down existing old fitting any type complete all as specified. Cat Part No. SLDRMN/LSDSMN-18W-CDL/NW/WW of Crompton Greave or equivalent in Philips/ Wipro/ Bajaj/ Syska/GE/ Osram/Siemens.

S&F surface mounted pressure die-cast aluminium luminair in powder coated white finish in square surface mounted LED flate panel with replaceable electronic driver with LED 18 Watt , 6000 K including connecting electric connection, including taking down existing old fitting any type complete all as specified.

S & F sheet metal enclosures single pole and neutral with two pin with earth plug and socket 20 Amp one module including one single pole MCB of 20 Amp rating including taking down old unserviceable complete all as specified.

Taking dwon fan, sealing cable ends, dismantling blades and removing fan and blades to store and refixing the same after completion of the repair work of the building and connecting up including provn of flexible copper cable from ceiling rose or connector to fan complete.

M&L for PVC conduit of size 25 mm (medium grade) fixing on wall/ ceiling surface/ concealed in wall including all fitting arrangement i.e. PVC clamp, rawl plug, screw etc, including making good disturbed surfaces of walls as per existing after that existing LAN wires and telephone wires any size disconnecting the existing connection and drawing through casing caping and re-connection with existing instruments as per original complete all as specified.

Taking down existing LED fitting/ decorative wall light/ ceiling light fitting from its position and refixing the same after completion of repair work of building and connecting up including provn of flexible copper cable from ceiling rose or connector of fittings complete all as specified.

M/s HANS BROTHERS

R B BUILDERS

M/s Nuway Constructors India Pvt. Ltd.

Aman Enterprises

M/s Balvinder Singh Engineer and Contractors