SPL REPAIRS TO BLOCK NO P-227 (QTR 01 TO 12) OR MD ACCN AT ALBERT EKKA ENCLAVE UNDER GE (SOUTH) UDHAMPUR

Amount

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified and as directed.

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Glazed coloured ceramic jointfree/rectified tiles of size 450x350mmx7-8mm thick in vertical surfaces like dado/skirting, etc., set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 10 mm thick rendering on fair faces of brick/concrete surfaces works in cement mortar 1:4 finished rough for receiving tiles, complete all as specified and as directed.

Non skid, coloured, ceramic jointfree/rectified tiles 300x300x7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and as directed.

Non skid, coloured tiles, ceramic jointfree/rectified tiles 600x600x10mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and as directed.

Description all as above but in vertical surfaces like skirting, etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering on fair faces of brick/concrete surfaces works in cement mortar 1:3, complete all as specified and as directed.

25 mm thick, Plain cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in sub base for laying floor finishes including finishing the surfaces even and rough without using extra cement, complete all as specified and as directed.

Machine cut kota stone slab flooring 20-25 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including Screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4, complete all as specified and as directed. Note:- Machine cut kota stone is to be laid on the stair in single piece.

Machine cut kota stone 20-25mm thick as in riser of steps, skirting, dado and pillar laid over cement screed base and jointed with white cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, over and including 15 mm thick rendering in cement mortar 1:4 as in backing coat for laying wall tiles, complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, removing all type of vegetation (like peeple tree etc) scrubbing down with water complete, all as specified and as directed.

20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting and mirror finish polishing over and including 20 mm thick screed bedding/ backing layer in CM 1:3, complete all as specified and as directed.

Rendering for single layer 15 mm thick on fair faces of brick /concrete on wall including facia chhajja etc.surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and as directed. Note : Water proofing compound to be measured and paid for separately as supply only.

10mm thick rendering on brick or concrete surfaces in cement mortar 1:6, finish surfaces even and smooth without using extra cement, complete all as specified and as directed.

5mm thick rendering on brick or concrete surfaces as in ceiling in cement mortar 1:3, and finish the surface even and smooth without using extra cement, complete all as specified and as directed.

Supply only integral water proofing compound, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt. ) , all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed.

Pressed steel frames for doors, made out of 1.25 mm thick MS sheet, with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete, of frame size 125 mm x 60 mm, including one shop coat of red oxide zinc chrome primer, including filling voids with PCC 1:3:6 type C-0 complete all as specified and as directed.

Description all as per item No 19 above but frame size 105 x 60mm.

Providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for, filling as in the pressed steel door frame/hold fast complete all as specified.

30mm thick flush shutters, solid core construction, with block board core and plywood face pannels and both face is covered with decorative face veneer with liping/frame to match, complete all as specified and directed.

35mm thick, factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete, all as specified and directed.

Powder coated (not less than 50 micron) anodised aluminium frame suitable for sliding/openable/fix, doors ,windows, ventilators , guard bar, grill and similar works with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed.

Powder coated anodised aluminium window and ventilator shutters, fixed/sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, grill, peg stay, 2 Nos hinge B-21, handle, screws etc., complete, all as specified and directed.

Powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified.

4 mm thick figured glass (frosted) ,pin head type and glazing with oil putty not exc 0.50 Sqm in each pane fixing to window/ventilator complete all as specified and as directed.

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples complete, all as specified and directed.

Rolled mild steel work of angle iron as in frames of doors , cooler stand, Cup Board, stair & Monkey Guard etc. conforming to grade Fe 410-O or (E-310-O) complete, all as specified and directed.

Hard drawn steel wire fabric cut to lengths, bent to shape required and tying welding to the angle frame etc. complete, all as specified and directed. (weight n. exc 4 Kg/ sqm)

18/19mm thick HDMR Board, termit proof, chemically well pressed, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, as in kitchen cabinet, cub boards, shelves etc including 6mm thick teak wood beading all around complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted , built in cement mortar 1:6, complete all as specified and as directed by Engr-in-Charge. Note PCC Bond Stone shall be paid separately under appropriate item and volume of bond stone shall be deducted.

Description all as per description of serial item No. 34.00 here in before but except stone.

Pre-cast plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregates) as in bond stones and in similar works set in cement mortar 1:6, including necessary form works, complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses of granite or trap stone etc. and hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 20 mm complete all as specified and as directed.

Flush pointing to Random Rubble stone uncoursed or brought upto courses Masonary in Cement Mortar 1:4 complete all as specified and as directed.

Brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed.

Description all as per item No. 39 above but except brick.

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortor 1:4 complete all as specified and as direceted.

Roughening surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 kg/Sqm including 15mm thick screeding in CM (1:3) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately). Applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and provide modified polymeric APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polyethylene film. Min wt of membrane will be 3.50 Kg/Sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitument 85/25 @ 1.2 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm, complete all as specified and as directed. Note :- Water proofing treatment will be done by manufacturer of APP membrane or through their authorised specialized agency/applicator which will further have to rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed otherwise.

Providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (not exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints through out the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Continuous (piano) hinges width of flaps 30 mm when opened, mild steel, bright finish or electrogalvanised complete all as specified and as directed.

150 mm aluminium handles, cast type anodised complete all as specified and directed. (ISI Mark)

Hasp and staple, 100 mm size safety type aluminium anodised with mild steel hinges pin, including bolt to hinge plate and fixed with screws, all as specified.

150mm long, aluminium anodised, barrel tower bolts (ISI Marked) of extruded section and fixed, complete all as specified and directed.

100mm aluminium handles, extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.(ISI Mark)

2nd class hard wood small fittings such as shaped door & window stops, cleat including all necessary labour, articles not exceeding 200 cubic centimetre each complete all as specified and as directed.

Mild steel cold rolled butt hinges medium weight 100 mm long fixed to steel /angle iron frame by welding, if required complete all as specified.

Mild steel, 300 mm, ordinary rat tail rod pattern door spring including roller and roller plate complete all as specified.

25 mm dia SS antique type curtain rods with bracket fixed to wall with suitable screws and onion type end brackets all as per approved design/colour/pattern fixed as directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube in opening as per specification & drawing, complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed.

Viterous china wash basin, white flat back size 550 x 400mm Pedestal type incl waste couping CP 32mm dia chain and plug and porcelan stopper and CI brackets of iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 and PVC waste pipe 32mm dia & CP grating with holes with pedestal of china ware fixed in repairs complete, all as specified and as directed.

Preparation of wooden or wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Preparation of steel and iron surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer, complete all as specified and as directed.

Preparation new/old surfaces plastered or unplastered and applying two coats of white wash on ceiling complete all as specified and as directed.

Applying two coats of oil bound distemper on wall including preparation on new/ old surface including applying 1mm thick layer of wall putty on wall to give uniform surface completed all as specified and directed. Note:-( Before applying of wall care putty , completed reomoving of treatment as directed and approved by engr-in-charge).

Preparation of newly plastered or unplastered surfaces of wall & applying two coats of cement base paint over a coat of chalk whitening, complete all as specified and as directed.

Vitreous China wash down water closet pan and seat cover (pedestal pattern), coloured (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, including connection to drain pipe (or out going pipe) and to flushing pipe, antisyphonage pipe, etc. including cast iron 'P' or 'S' trap for 100mm bore of pipe, fixed in repairs complete all as specified and as directed.

10 ltr capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with twin flush provision, fixed in repairs, complete all as specified and as directed.

Supply only flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern, complete all as specified and as directed.

MS grating 100mm dia fixed to floor trap, complete all as specified and as directed.

Fancy towel rail 600mm long,brass chromium plated, complete all as specified and as directed.

PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

Steel peg set colour coated of six as per sample in repairs complete all as specified and as directed.

Sinks made of stainless steel with draining board, made out of 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar including fixing cantilever brackets connecting union to pipe and 32mm dia GI pipe duly painted upto Nihani Trap or Floor trap complete as directed at site, overall size 915mmx460mm bowl size 410mm x 330mm x160mm, in repair complete all as specified and as directed.

Plate rack made of stainless steel, 600 x 750X0.55mm including fixing as per manufacturers instruction complete all as specified and as directed.

Plain cement concrete 1:5:10 type E-2 using 40mm graded crushed stone aggregates as insunken floor/ foundatiom, complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes, upto 100 mm internal dia jointed in cement mortar and taking out of trenches or fixed to wall, if required complete all as specified and as directed.

110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, in repair complete all as specified and as directed.

75mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, in repair complete all as specified and as directed.

PVC (SWR) bend any radius, for 110 mm bore pipe, fixed with joint sealant, fixed in repairs, complete all as specified and as directed.

PVC (SWR) bend any radius, for 75 mm bore pipe, fixed with joint sealant, fixed in repairs, complete all as specified and as directed.

PVC SWR branch piece , single (single Y) equal or unequal 110 mm size fixed with joint sealent etc complete all specified and as directed.

PVC SWR branch piece , single (single Y) equal or unequal 75 mm size fixed with joint sealent etc complete all specified and as directed.

100mm bore PVC (SWR) junction Y or T single,(single) equal or unequal with access door etc complete all as specified and as directed. (ISI Marked)

75mm bore PVC (SWR) junction Y or T single,(single) equal or unequal with access door etc complete all as specified and as directed. (ISI Marked)

110mm bore pipe PVC (SWR) reducers complete all as specified and as directed. (ISI Marked)

110mm bore pipe PVC (SWR) 'P' trap complete all as specified and as directed. (ISI Marked)

75mm Cast iron floor traps with grating including jointing to waste pipe fixed cncrete type B1 (1:2:4). complete all as specified and as directed. (ISI Mark)

Reinforced cement concrete 1:2:4 (Nominal mix) type B-1, using 12.5mm graded crushed stone aggregates as in chajjas, slabs or similar works etc, complete all as specified and as directed.

Taking up or down steel tubing of 15 mm bore with connections for cleaning for refixing or removing to store yard/from site, complete all as specified and as directed.

Taking up or down steel tubing of 20 mm bore with connections for cleaning for refixing or removing to store yard/from site, complete all as specified and as directed.

15mm bore galvanised steel water tubing medium grade (ISI Marked) with and including all fittings and fixed complete to walls and or laid under floors etc complete all as specified.

20mm bore galvanised steel water tubing medium grade (ISI Marked) with and including all fittings and fixed complete to walls and or laid under floors etc complete all as specified.

Gun metal globe of gate valve with iron wheel head, screwed both ends of size 20mm fixing in repair.

Gun metal globe of gate valve with iron wheel head, screwed both ends of size 15mm fixing in repair.

Angle valves, cast copper alloy,screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair, for 15mm dia of pipe complete all as specified and as directed.

Bib taps , cast copper alloy, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule for bore of pipe 15 mm fixing in repair, complete all as specified and as directed.

Stop valves, fancy type chromium plated with long shank concealed type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore 15mm, fixed in repairs, complete all as specified and as directed

Brass Chromium plated over head shower rose of dia 125mm with swivel joint fixed to pipe or union of 15mm bore, fixed in repairs, complete all as specified and as directed.

Centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, fixed in repair complete all as specified and directed.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed.

Rotational moulded polyethylene water storage tank , two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 1000 litres each including all accessories (i.e GI nipples and Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of bore 20mm (Minimum weight 210 gram) etc), incl dismantling existing water tanks, complete all as specified and as directed.

Soap dish, any type, fixed to plugs with chromium plated brass screws fixed in repairs, complete all as specified and as directed.

15 mm dia wall mixer chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed in repairs, complete all as specifie and as directed.

4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level), complete all as specified and as directed.

Broken stone hardcore of gauge exceeding 63 mm but not exceeding 100mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed.

Plain cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foudation, filling and mass concrete all as specified.

Chequered cement concrete tiles 30cm x 30cm x 40mm thick, with mixture of white & grey cement in equal proportion & no pigment set, jointed and pointed in neat cement slurry in floors, and including 20 mm thick screed bedding/ backing layer in CM 1:6, complete all as specified and as directed.

Demolition and breaking up drain pipes, 150/200mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and as directed.

Brick work with old size sub class 'B' bricks, in one brick thick honey comb walling, built in cement mortar 1:6, complete all as specified and as directed.

Excavating over area, not exceeding 1.5 m depth; for foundation, etc. and getting out in any type of soil, complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for laying cables/pipes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth in and getting out in any type of soil, complete all as specified and as directed.

Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil,complete all as specified and as directed.

Removing excavated material exc. 250m and depositing where directed at a level n exc. 500 m above the starting point, complete all as specified and as directed.

Brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4, complete all as specified and as directed.

Plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in surface channels and drains including necessary form work, complete all as specified and as directed.

Pre-cast RCC cement concrete 1:2:4 type B-I (20mm graded) as in manhole cover slab and in similar works bedded and jointed in cement morter 1:4, complete all as specified and as directed.

Framed work of angle or other sections such as frames of manhole covers, hold fasts and similar work conforming to Fe-410-0 ,complete all as specified and as directed.

TMT mild steel bars, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and including binding with MS wire (annealed not less than 0.9mm dia), complete all as specified and as directed.

TMT mild steel bars, 5mm dia and over upto and incl 10mm dia , as in stirupps cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) , all as specified and as directed.

Providing cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0 complete all as specified.

Reinforced concrete pipes 200mm bore ,class NP2,laid and jointed complete with coller all as specified and as directed.

Concrete bed to drain pipes of 200mm bore, including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregates, complete all as specified and as directed. NOTE: Thickness of bed is 10 cm and width of bed is 30 cm plus external dia of pipe.

150mm bore salt-glazed stoneware drain pipes of grade 'A' laid in trenches and jointed, complete all as specified and as directed.

Concrete bed to drain pipes of 150mm bore, including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregates, complete all as specified and as directed by Engr-in-Charge. NOTE: Thickness of bed is 10 cm and width of bed is 30 cm plus external dia of pipe.

Reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

Plain cement concrete 1:4:8 type D-2 (using 20mm graded crushed stone aggregates) as in surface channels and drains beds, complete all as specified and as directed.

10mm thick rendering on brick or concrete surfaces in cement mortar 1:4, finish surfaces even and smooth without using extra cement, complete all as specified and as directed.

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc. complete all as specified and as directed.

Providing, cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in coping etc., complete all as specified and as directed.

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as light fittings, switches, ceiling roses, pendants, regulators, sockets etc. and making good disturbed surfaces of wall, ceiling, floors etc to match the existing, complete all as specified and as directed.

Taking down old unserviceable copper /aluminium,submain wiring any type/size from existing and making good disturbed surfaces of wall, ceiling, floors etc to match the existing, complete all as specified and as directed.

Taking down MCB DB SPN/TPN with all accessories carefully and making good disturbed surface of walls, complete all as specified and directed.

Point wiring with 1.5 Sqmm PVC insulated, unsheathed (FRLSH) cable with multi stranded copper conductor wiring in and including PVC concealed conduit (ISI marked) 20mm dia and over, wall thickness not less than 2.00 mm thick and all accessories for one light/fan/bell/Exhaust point controlled by one switch with 1.25mm thick pressed Modular sunken boxes & PVC/ Metal back plate (modular type) of required modules concealed on walls including inner and outer sheet for fixing of modular switches/socket/regulator etc along with PVC insulated and unsheathed FRLSH 1.5 Sqmm multistrand copper conductor earth wire connected to common earth dolly complete including cutting, chasing the surface and then making good the same in CM 1:3, complete all as specified & directed.

Description all as per item No 133 above but for one light point controlled by 2-two way switches.

Description all as per item No 133 above but 05 Amp socket outlet controlled by one switch on independent board.

Description all as per item No 133 above but 05 Amp socket outlet controlled by one switch on same board with other switch.

Description all asper item No 133 above but one 3/5 pin 15 Amp socket outlet on independent board with PVC insulated, unsheathed FRLSH cable 2.5 Sqmm copper multistrand conductor, along with PVC insulated and unsheathed FRLSH 2.5 Sqmm multistrand copper conductor earth wire connected to common earth dolly complete all as specified and as directed.

Description all asper item No 133 above but one 3/5 pin 15 Amp socket outlet on independent board with PVC insulated, unsheathed FRLSH cable 4 Sqmm copper multistrand conductor, along with PVC insulated and unsheathed FRLSH 2.5 Sqmm multistrand copper conductor earth wire connected to common earth dolly complete all as specified and as directed.

Modular Switch, single pole, 1 module, two way, 10 Amp, 230V, 50 Hz AC, with inner/outer cover required module complete all as specified and as directed.

Modular Switch, single pole,1 module, one way ,6 Amp , 230V, 50 Hz AC, with inner/outer cover required module complete all as specified and as directed.

Modular Switch, single pole,1 module, one way ,16 Amp , 230V, 50 Hz AC, with inner/outer cover required module complete all as specified and as directed.

Bell push Modular type, 1 module, 6 Amps 230 volts complete all as specified and as directed.

Modular socket, 06 Amp 3 pin flush type 230 Volts, 50 Hz AC, with inner/outer cover required module complete all as specified and as directed.

Modular Socket combined, 2 in 1- 6 pin , 6 & 16 Amp 230 Volts, 50 Hz AC, with inner/outer cover required module complete all as specified and as directed.

Stepped type fan regulator 120W, 230V 50 C/S, 2 module, Deluxe Modular type electronic, hum free suitable control speed of fan from 0 to 100 %, complete all as specified and as directed by Engr-in-Charge.

Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Block, complete all as specified and as directed.

Bell (ding dong type), AC electronic type, 230 volts, single pole, 50 Hz complete all as specified and as directed.

Sheet metal enclosures for distribution board when MCB to be used SPN 8 way with IP-43, IK-09 protection 240V with 200 Amps rated bus bar, double door type including taking down old making good the distubed surfaces to match with existing specifications, complete all as specified.

MCB SPN, 40 Amps, 'C' series 10 KA , 240 Volts including providing aluminuium thimbles for outgoing cable, fixed in repairs, complete all as specified.

MCB SP, 6 to 32 Amps, 'C' series 10 KA 240 Volts including providing aluminuium thimbles for outgoing cable, fixed in repairs, complete all as specified.

Sub main wiring with two runs of 6 Sqmm ( 2x6 sqmm ) 1100 volts grade single core FRLSH PVC insulated unsheathed multistranded copper conductor conforming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia ISI marked with all conduit accessories mounting on suface of walls /roofs / ceiling etc with one run of 6 Sqmm (1x6sqmm ) single core FRLSH PVC insulated unsheathed copper conductor cable as earth wire, fixed in repair, complete all as specified and directed. Note:- 2 runs of 6 Sqmm (2x6sqmm ) ,one run of 6 Sqmm (1x6 sqmm ) cable and one metre of conduit will be measured as one unit.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground, (Earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, connected to and including 4mm dia galvanized iron wire lead by means of bolts, nuts, check nuts and washers of galvanized standard iron or steel all as specified or indicated in electrical plate No 3 of MES Part-I, including testing on completion including the material and labour and taking out old unserviceable earthing of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Precast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (d) Funnel with watering pipe of GI 20 mm nominal bore medium grade and copper lugs etc all as specified.

Srl item No 152 Contd … (e) 15 mm nominal bore light grade GI protection pipe 7.5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal. (g) Testing of earthing. Note : On testing after completion of earthing, if the desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of the Engineer-in-Charge.

Taking down ceiling fans, cleaning its dust particles oiling, greasing, one coat synthetic enamel white spray painting with blade, reassemble the same along with all fittings and hanging the same back to its original position including connecting the wire to ceiling rose etc, complete after completing the wiring all as specified and as directed. Note:- The spare like condensor, ball bearing, cotter pin, nuts & bolts, connecting rods & hooks etc if founds defective/ damage deemed to be replaced and make the ceiling fans functional. No extra payments will be done on this account.

Angular lamp holder PVC polycarbonate type with cord grip cap suitable for light fittings complete all as specified and as directed.

LED bulb 15W, 230V, AC suitable for Angular lamp holder complete all as specified and as directed.

LED lights fitting 1x 20W, 230V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

LED lights fitting 1x 9W/1x 10W bulkhead luminaires, including LED light driver, holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

Refixing of LED light any type/ any wattage connected with 3 core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

LED building security light fitting, 35 watt, 230V AC outdoor type with high pressure diet cast aluminium hosing and heat resistant complete with driver, lamp, clamps, suitable bracket with impact corrosion resistant including thermal managment in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Street light Bracket complete made of GI pipe of suitable size, medium grade of suitable size, 1.2m long bent to shape as per site requirement alongwith MS flat iron clamps with nuts, bolts, washers including grouting the same with wall , complete all as per the direction of Engr-in-Charge.

Supply, laying and testing of XLPE insulated sheathed armored heavy duty LT 1100 Volts grade cable with aluminum conductors laid in trenches/pipe, fixed to poles, walls of size 16 sqmm 4 core including taking up/down old unserviceable cables. complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed.

Dry coarse sand as cushioning to under ground cable provided with layer of 8 cms deep before laying the cable and 15 cms deep after laying and stretching the cable, punned to 18 cm thick complete all as specified and as directed. NOTE Only punned thickness shall be measured for payment purpose.

Sub class ‘B’ old size well burnt bricks, laid flat in trenches as protection to cable, complete all as specified and as directed.

GI tubing light grade 40mm dia along the wall/in trenches/in duct/in culvert/road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles, complete all as specified and as directed.

Modular TV socket outlet single, with inner/outer cover required module including TV cable required length from roof complete all as specified and as directed.

Supply and fixing electric water heater, vertical storage type steel body with steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and as directed. Make:- Bajaj/Havells/Crompton/AO Smith.

Supply and fix Exhaust fan, plastic body AC single phase 230/240 V of size 250mm sweep with louver speed 900-950 RPM power input 50-55 W, Heavy duty, complete all as specified and as directed.

khajuria builders (BID ID -3389121)

d d builders (BID ID -3382484)