SPECIAL REPAIR TO OTM BLDG NO RH-03 OF 2 NAGA (MASHKOH) AT JUTOGH CANTT UNDER GE JUTOGH

Amount

Demolition of brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and directed.

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and directed.

M&L for half brick work with sub class 'B' brick in CM 1:4, straight or curved on plan to any radius, complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with eater etc, of any height including necessary scaffolding and T&P required to complete the work complete all as specified and directed.

M&L for rendering 15 mm thick on fair surfaces of brickwork or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement at any height complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 surface finished fair and even mixed with water proofing compound @ 3% by weight of cement or as per manufacturers instruction, at any height complete all as specified and directed. Note: WPc shall be measured and paid separately.

Supply only water proofing compound complete all as specified and directed.

M&L for preparing of plastered or unplastered on new surface walls and applying two coats of weather proof paint on external surfaces including a coat of alkali resistant priming paint of any height including necessary scaffolding and T&P required complete all as specified and directed.

M&L for complete removal of old decorative existing treatment on old surface walls and applying two coats of weather proof paint on external surfaces including a coat of alkali resistant priming paint of any height (G Floor to 3rd Floor) including necessary scaffolding and T&P required complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint on wall surfaces complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying two coats of distemper oil emulsion on wall surfaces complete all as specified and directed.

Dismantling boarding, unframed work any description, fixed in any position with nails etc complete all as specified and directed.

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level, complete all as specified and directed.

M&L for moorum/red bajari filling in floors or pavings, laid in layers not exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for Hard core of gauge n exc 63mm thick of broken stone or boulder spread and levelled in layers n.exc 15cm thick, watering, ramming to true surface complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection, hard sanding and path finished concrete surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4, type B-1, using 20 mm graded crushed stone aggregate as in floor finished surfaces even and smooth without using extra cement,complete all as specified and directed.

Dismantling of floor hearth or wall tiling incl cement mortar bedding and removing the rubbish off the premises, complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 300x200x7/ 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over over 10mm thick backing coat in cement mortar 1:4 etc complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 18-20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing laid over and including 20mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 18-20mm thick in skirting/dados and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing fixed over and including 10mm thick rendering/ backing coat in cement mortar 1:4 complete all as specified and directed.

M & L for granite (of any type) 19-20 mm thick one side machine polished in steps, jambs, pillars, window cills and top of kitchen platform and counter top of wash basin etc set and jointed in neat cement slurry and pointed with coloured cement to match fixed over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) including laid over 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite fixed over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in , cooking platform, and other similar situations complete all as specified and directed.

Demolition of reinforced cement concrete as in cooking platform, lintels, chhajja, cover slab etc of any description and in any position not other wise specifically provided for complete all as specified and directed.

M&L for RCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including form work compete all as specified and directed.

M&L for PCC 1:2:4, type B-1, using 12.5 mm graded crushed stone aggregated as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throttling, as directing including necessary form work compete all as specified and directed.

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking , bending, hooking end and binding with and including mild steel wire not less than 0.9 mm dia and securing with clips complete all as specified and directed.

All as per Srl Item No 31.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets compete all as specified and directed.

M & L 4mm thick non asbestos fibre cement building boards (E board designer with PVC white coating) fixed or laid /inserted to timber/GI/Aluminium frame work with screws in ceiling flat or sloping compete all as specified and directed.

M&L for GI frame work of size 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre compete all as specified and directed.

S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long compete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern in roof covering, compete all as specified and directed.

Dismantling timber scantlings framed work in fillets, rails, posts rafters, purlins, etc under 40 sq cm in section in any position with nails etc compete all as specified and directed.

M&L for plain fillets of second class hard wood, square or rectangular in section, clean sawn, secured with nails or brads; sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm compete all as specified and directed.

M&L for 2nd class hard wood clean sawn boarding 25mm thick, planed one side, with butt joints in ceilings/roof at any height, in any situation except flooring & skirting compete all as specified and directed.

M&L for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws compete all as specified and directed.

M&L for pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall eaves board etc., fixed with self tapping screws compete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for truss/purlin/rafter compete all as specified and directed.

Dismantling timber scantling, framed/ unframed work of size 40 sq cm and over in section, in any position fixed with nails etc compete all as specified and directed.

M&L for M S Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-W (Gde-E-250) quality B, compete all as specified and directed.

M&L for 2nd class hard wood in scantlings, rafter, post and purline, clean sawn in framed work including and repair to replace old and decayed timber (including piecing, scarfing etc of old and new timber if required and removing defective portions to store etc compete all as specified and directed.

M&L for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; will ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 compete all as specified and directed.

Taking down eaves gutters and rain water pipe (any size or pattern) including all fitting, heads, shoes, bends, swan necks,etc including cleaning or refixing or removal to store etc compete all as specified and directed.

S&F 1.25mm thick Mild steel sheet eaves gutters, galvanised class-3, half round in 150mm dia with rounded edges compete all as specified and directed.

Taking down chowkhats or frames n exc. 1.5 sq. m each with shutter (without taking off shutters from the frames) and removing from site compete all as specified and directed.

Taking down chowkhats or frames exc. 1.5 sq. m but n.exc 4 sqm each with shutter (without taking off shutters from the frames) and removing from site compete all as specified and directed.

Taking down shutters of any description n exc 1 sq. m each including removing from site compete all as specified and directed.

Taking down shutters of any description exc 1 sq. m but n.exc 2 sqm each including removing form site compete all as specified and directed.

M&L for forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work new work built in CM 1:4, compete all as specified and directed.

S&F 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints compete all as specified and directed.

S&F 30 mm thick 2nd class hard wood glazed and skelton shutter for window, ventilator, etc. open rebated and prepared to receive glass gauze etc (divided into panels with shash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of numbers of shutter as specified in SSR Pt I Section 8, clause 8.20 (b) supplied and fitted to chowkat etc compete all as specified and directed.

S&F flush shutters, 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both side with lipping/frame to match compete all as specified and directed.

S&F 2nd class hardwood Glazed and skeleton shutter 35 mm thick, divided into square, with plain chamfered or round mitred and rebated sash bar, any numbers prepared to receive glass, gauge etc edges of framing plain or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chowkat etc compete all as specified and directed.

M&L for 20 mm dia mild steel coloured PVC coated fancy curtain rod fitted in MS coloured bracket complete all as specified and directed.

M&L for mild steel coloured brackets including PVC designer dom for curtain rod complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads compete all as specified and directed.

S&F sheet glass 3 mm thick ordinary quality and glazing with oil putty or wooded bead built in squares not exceeding 0.5 sq.m in each pane, compete all as specified and directed.

S&F sheet glass 3 mm thick Figured glass, pin head type and glazing with oil putty or wooden bead in squares n exc 0.5 sq. m in each, compete all as specified and directed.

S&F galvanised mild steel wire cloth in repair 0.63 mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks or galvanised wire staple including wooden beading complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x47mm made out of 5mm thick plain coloured PVC sheet reinforced with M.S. Square tube, compete all as specified and directed.

S&F Factory made panel PVC door shutter 30 mm thick (style) consisting of frame made out of M S tubes for top & bottom rails M S frame shall be covered with heat moulded plain colour PVC ‘c’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour pick sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail, Paneling of colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable pick sheet beading and jointed together with solvent cement compete all as specified and directed.

S&F Butt hinges 100 mm size medium weight cold rolled mild steel compete all as specified and directed.

S&F Butt hinges 75 mm size medium weight cold rolled mild steel compete all as specified and directed.

S&F aluminium handles, cast type, anodised 150 mm size compete all as specified and directed.

S&F aluminium handles, cast type, anodised 125 mm size compete all as specified and directed.

S&F 200 mm aluminium anodised barrel tower bolt of extruded section and fixed, compete all as specified and directed.

S&F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed, compete all as specified and directed.

S&F 300 mm aluminium anodized sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy, compete all as specified and directed.

S & F mild steel 300mm ordinary rat rail pattern springs including roller and roller plate compete all as specified and directed.

M&L for preparing new or previously untreated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing old painted surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint compete all as specified and directed.

M & L for providing PCC 1:3:6, type C-1, using 20mm graded crushed stone aggregate as in hold fast blocks, foundation, filling and mass concrete complete all as specified and directed.

S&F framed work such as grills, gratings, etc.,with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladder; framed baluster; walk ways; railing; framework of watertanks staging and similar work conforming to Fe-290. Gde-E-165 compete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm wide or girth incl preparation of surface etc., compete all as specified and directed.

Dismantling water tanks or capacity exceeding 500 ltrs and not exceeding 1000 ltrs, compete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical type with closed top) of 1000 litres capacity, ISI marked, triple layered, marked embosed, hoisted and fixed in position including connecting up pipes compete all as specified and directed.

S&F 20 mm bore ball valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or ferrule and fixed, compete all as specified and directed.

S & F Gun-metal, globe or gate valves 20 mm bore, with iron wheel head, screwed both ends for iron pipes, compete all as specified and directed.

Taking up or down steel tubing and connections 15 mm bore compete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore complete all as specified and directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth compete all as specified and directed.

S&F galvanised mild Steel water tubes,15 mm bore with all fittings, medium grade, fixed to walls and ceiling or laid in floors compete all as specified and directed.

S&F galvanised mild Steel water tubes, 20 mm bore with all fittings, medium grade, fixed to walls and ceiling or laid in floors compete all as specified and directed.

S&F in repair 15 mm bib taps fancy type cast copper alloy chromium plated with crutch with butter fly handle, screwed for iron pipe or brass ferrule, compete all as specified and directed.

S&F in repairs 15mm dia stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe compete all as specified and directed.

S & F in repair vitreous china wash basin flat back of size 550x400mm incl brackets, cutting for and pinning in ends or brackets, taps, waste, chain and plug and porcelain stopper fitting complete all as specified and directed .

S&F in repair brass CP fancy type 15mm bore pillar tap (Hot and cold mixture) for WHB compete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm long compete all as specified and directed.

S & F in repair brass chromium plated tubular towel rail ‘D’ type 60cm long between flange, compete all as specified and directed.

S&F in repair vitreous china wash water closet pan ( pedestal pattern) white fixed in floor including trap, connecting to drain ( or outgoing pipe ) and flush pipe, anti syphonage pipe, flush pipe to pedestal pan including all joints etc.compete all as specified and directed.

S&F in repair plastic water closet seat, white/ coloured, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device compete all as specified and directed.

S&F in repair 10 litres cap PVC low level valve less symphonic action type flushing cistern white/ coloured, with inlet, ball valve, float and handle including brackets and flushing pipe, compete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement compete all as specified and directed.

S & F in repair PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to wall 110 mm bore compete all as specified and directed.

S & F in repair 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors compete all as specified and directed.

S & F in repair PVC SWR Bends in any radius 110 mm bore with access door compete all as specified and directed.

S & F in repair PVC SWR Bends in any radius 75 mm bore with access door compete all as specified and directed.

S&F in repair PVC (SWR) Vent cowl 110 mm bore compete all as specified and directed.

S&F in repair 110mm dia PVC (SWR), junction single, (Single T) equal or unequal compete all as specified and directed.

S & F in repair brass CP wall mixer for mixing hot & cold water screwed down for iron pipe compete all as specified and directed.

S&F in repair chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union compete all as specified and directed.

S&F in repairs glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, compete all as specified and directed.

S & F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste couplingm waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm compete all as specified and directed.

Excavation in trenches not exc 1.50 M wide and n exc 1.50 m in depth for foundation and getting out in hard/dense soil complete all as specified and directed.

Excavating over areas, n exc1.5 m deep and getting out hard/dense soil complete all as specified and directed.

All as per Srl Item no 111.00 above but for each additional 1.5m or part or part thereof in depth beyond the first 1.5m

M & L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L PCC 1:2:4, type B-1, using 20 mm graded crushed stone aggregate as in coping to retaining walls/steps/parapet /base of railing post, hold fast block etc., including necessary formwork complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4, type B-1, using 20 mm graded crushed stone agg as in floor finished surfaces even and smooth without using extra cement,complete all as specified.

Returning filling in including speading, leveling ,watering and well ramming in layer complete all as specified and directed .

Removing of excavated Soil exc 50m but n. exc 250m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified.

M&L for precast cement concrete 1:1.5:3, type A-1, using 20 mm graded crushed stone aggregate, set in CM 1:6 in cover slab and similar work including necessary formwrok complete all as specified and directed. Notes : Reinforcement shall be measured masured and paid separately .

Demolition and breaking up 110 mm dia drain pipes (salt glazed ware, AC, reinforced Concrete and PVC pipe) set in cement mortar complete all as specified.

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M&L for concrete bed to drain pipes in PCC 1:4:8, type D-2, using 40 mm graded crushed stone aggregate, including packing under and completely surrounding the pipes after they are laid and tested, bore or pipe 110mm complete all as specified and directed.

Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for taking credit to be measured separetly including making good the disturbed portion/surface complete all as specified and directed.

M&L for Point wiring with colour coding multistranded copper conductor cable, PVC insulated(FRLS) and unsheathed size 1.5 sqmm with PVC Casing & Caping with fixing accessories, to be fixed, for one light/fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet/modular with all fittings (ISI Marked) incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 sqmm for earth wire conncected to common earth dolly complete all as specified and directed.

All as per item No 123.00 above but for one 3/5 pin socket 5 Amp on independent board.with 1.5 sqmm wire with 1.5sqmm earth wire complete all as specified and directed.

All as per item No 123.00 above but for one 3/5 pin socket 5 Amp on same board, with 1.5 sqmm wire with 1.5 sqmm earth wire complete all as specified and directed.

All as per item No 123.00 above but for 3 pins socket outlet 15 Amps independent with 4 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4 Sqmm complete all as specified and directed.

S&F switch piano flush type/Bell push/, 5 Amps, single pole one way complete all as specified and directed.

S&F multi socket 5 pins, 6 Amp, flush type piano (multi purpose) complete all as specified and directed.

S&F multi Socket 15 Amps flush type, 6 Pin, 230 Volts , AC complete all as specified and directed.

S&F switch 15/16 Amps flush type 230 Volts , AC complete all as specified and directed.

S&F ceiling rose, PVC / Polycarbonate isolated body ,surface backlite, 65x50mm, three terminals complete all as specified and directed.

S&F angle lamp holder PVC/Polycarbonate base / back suitable for LED lamp incl LED Bulb 9W B-22 Pin type complete all as specified and directed.

S & F LED tube light along with fixture, 20W(4 feet) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete and including taking down existing fittings complete all as specified and directed. Make : BAJAJ cat part no:BCLSB 20 WH/ Havells cat part no: LUMILINEBS20WLED865SPCWH/ CG cat part no : LCTL-18-CDL

S&F in repairs Skylite recess mounting,36W, LED 2'x2' luminaire integrated electronic driver, optics diffused, complete all as specified and directed. Make : BAJAJ cat part no:BCTBLR 36W LED/ Havells cat part no: PLUTONEO2X2PLR34WLED857S/ CG cat part no : LCTLRN-36-FO-CDL .

S&F LED building secuity light 25 watt, incl bracket as per suitable size and all connected accessories ( clamps, nut, bolt etc)complete and including taking down existing fittings complete all as specified and directed. Make : BAJAJ cat part no:BCLST 25W LED I V2/ Havells cat part no: ENDURAPEARLSL25WLED757SASYTOPCMP/ CG cat part no : LSTS-25-CDL.

M&L for submain wiring with 2X6.0 sqmm +1X4.0sqmm earth wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC casing-N-caping with all accessories including taking down complete all as specified and directed. Note: Two run of 6sqmm and 1 Run of 4sqmm wire and 1 Run of PVC casing-N-caping shall be measured as One RM

Supply, fixing and laying of 35 sqmm 3.5 core 1100V graded heavy duty cable XLPE insulated stranded AIuminium conductor served underground cable including taking out old cable complete all as specified and directed.

M & L GI tubing light grade 40 mm bore for protection of service connection laid in trenches/ walls etc and for protection of connection wire from junction box to light fittings, complete all as specified and directed. Note : Necessary clamps, nuts, bolts etc deemed to be included.

Supply, fixing or laying HDPE (DWC) tubing 50 mm dia (OD) of pressure rating 6Kgf/Cm2 fixing on poles, walls under floors, road crossing, laying in trenches, laying on surface etc as reqd at site and as per direction of Engr-in-Charge..Note: The rates of required accessories, bend, joints, nut bolts, clamps etc complete all as specified and directed.

S&F in repairs VTPN prewired distribution board TPN-DPX 125 MCCB including one No MCCB 125 Amps as incomer and suitable SPN/TP MCBs as outgoing double door type sheet metal enclosure 415V with 200 Amps rated standard busbar of suitable size plate and common neutral link without MCBs with blank plate suitable for 4 way complete all as specified and directed. Make: Legrand IP-54-IK-09 Cat No. 607770 or equivalent in Schneider/Havells Note : Rates of MCCB and MCB SPN/SP/TP shall deemed to be included in the quoted rates.

S & F in repairs single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways complete all as specified and directed.

S & F in repairs single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 8 ways complete all as specified and directed.

S&F MCB SPN 06 to 40 Amps 240V incl all termnials, fitting including taking down etc . complete all as specified and directed.

S&F RCBO for earth leakage , over load & short circuit protection 2 pole, 32 Amp rating, 300mA capacity suitable for 240 Volts including taking down complete all as specified and directed.

S&F MCB SP 06 to 40 Amps 240V incl all termnials, fitting including taking down etc. complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion complete all as specified and directed.

M/S Jaswant Kumar Aggarwal

PRITPAL SINGH

H.S. Enterprises

M/S Meera Builders