Restoration of Rain Damage to WSS Bhunad Bhalogi in GP Bhalogi in Tehsil Salooni Distt.Chamba H.P

Excavation in foundation, trenches etc. in all kinds of soil such as pick work, jumper work, blasting work in soft / hard rock, chiselling in soft / hard including wedging out of a rock where blasting is prohibited and stacking the excavated earth up to all lifts, stacking the excavated soil up to all lead clear from the edge of excavation and then returning the stacked soil in 15 centimeters layers when required in to plinths, sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as per direction and to the entire satisfation of Engineer- in- charge up to leads and lifts.

Providing and laying cement conrete 1 : 3 :6 . ( 1 cement : 3 sand and : 6 grade stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation and plinth upto all leads and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge.Providing and laying cement concrete 1 : 1½ : 3 mix. ( 1 cement : 1½ : sand : 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinfocement for reinforced concrete work in .

Foundation footings bases of columns and the like; and mass concreteas per direction and to the entire satisfaction of Engineer-in-Charge.

Walls any thickness but not less than 0.1m thickness including attached pillaster buttresses, plinth and string courses from top of foundation upto two level all floor level as per direction and to the entire satisfaction of Engineer-in-Charge.

P/L cement concrete work 1:2:4 ( 1Cement: 2 Sand :4 Graded Stone agregate 20 mm Nominal size ) and curing complete excluding he cost of form work and reinforcement work in suspended floor roofs landing and shelves and their support Balconies Beams griders bressumers and contilevers upto floor two level as per the direction and entire satisfaction of Enginee-in-charge.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden batten and ballies, in all heights of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in :- Vertical surfaces such as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

In flat surfaces with steel plates such as soffits of suspended floors, roofs, landing and the like floor etc upto all thickness in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Edge of slab brakers in floors and wall under 20 cm wide including all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Placing mild steel/tor steel (reinforcement for RCC work) including bending,binding and placing in position complete in all respect including all leads and lifts as per the direction and entire satisfaction of Engineer-in-Charge.(Labour Rateb Steel will be issued free of cost.)

Providing and fixing cast iron cover with frame of internal dimension 600x600 mm reactngular cast iron cover ( Light duty) single seal pattern the weight of cover to be not less then 23 Kg.