REPAIRS TO ROOF, SHAFT AND CHAJJA ALONG WITH CONNECTED ITEMS IN ZONE A AND ZONE B, FOOTPATH, KERB STONE AND SEWAGE PIPE LINE IN MD ACCN AT MIRAN SAHIB UNDER GE JAMMU

Amount

Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and labour for cutting and derooting of tree, shrubs on wall, ceiling, roof, adjacent to pipes, at corner etc upto three storey and rendering 15 mm thick in cement mortar (1:3) upto 5 Sqm and applying three coats of white wash or two coats of color wash over one coat of white wash to match the existing shade complete all as specified and directed.

Material and labour for cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in roof kerbs, benching, coping, padding, kneelers, chajjas, roof projections etc complete all as specified and directed.

Dismantling wall and ceiling boards (fibre pulp / insulation) any thickness including cover fillets including taking down all electric fittings fixed with ceiling and refixing the same in position after replacing the ceiling complete all as specified and as directed.

Supply and fixing in position suspended false ceiling system using E-Grid suspended ceiling grid system. The size of grid shall be 600 X 600mm with GI frame work, main runner 39 X 24mm, cross tee 29 X 24mm and wall angle 22.2 X 22.2mm using 4 mm thick high pressure stream cured non premiered classic / designer variant E-Board ISI Marked IS No : 14862-2000. Fibre cement 'E' board to be placed in the gird of 'E' grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the purlins of the roof with butterfly clips complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:3) on fair faces of brick / concrete surface, chajja, fascia, ceiling, roof projection, corner joints, cornices, wall in patches including necessary scaffolding upto three storey etc surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick / concrete surfaces mixing with water proofing compound as per manufacturer's instruction including necessary scaffolding upto three storey etc surfaces finished even and smooth without using extra cement complete all as specified and directed. Note: - Water proofing compound shall be measured and paid separately under respective item.

Supply only liquid water proofing compound complete all as specified and directed.

Material and labour washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement : ½ coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings.including taking down old plaster complete all as specified and directed.

Material and labour for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

Demolition of concrete in ground floor not exceeding 15 cm in thickness below or above ground level including floor finish such as tiles of any thickness and any description etc complete all as specified and as directed.

Material and labour for 75 mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in floor / plinth protection laid in suitable panels finished even and fair with 6mm joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85 / 25 or 80 / 100 grade and three parts of sand (all by weight) complete all as specified and as directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.50 Sqm but not exceeding 4 Sqm each and removing from site complete all as specified and as directed.

Taking down chowkhats or frames (without taking off shutters from the frame) not exceeding 1.50 Sqm each and removing from site complete all as specified and as directed.

Taking down shutters from the frame of any description exceeding 1 Sqm but not exceeding 2 Sqm each leaf and removing from site all as specified and as directed.

Supply and fixing pressed steel frames of size 105 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc complete and fixed all as specified and directed.

Supply and fixing pressed steel frames of size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc complete and fixed all as specified and directed.

Material and labour cement concrete (1:3:6) type C-0 (using 12.5 mm graded crushed stone aggregate) filling in pressed steel chowkhats bed block for holdfast and the like complete all as specified and directed.

Supply and fixing 35mm thick second class hard wood panelled shutter plain, framed with panels of timber flat on both sides supplied and fitted to chowkhats complete all as specified and directed.

Supply and fixing 35 mm thick second class hard wood glazed and skelton shutters sizes of members as specified in SSR (Part-I) clause 8.20 (a), open, rebated and prepared to receive glass or gauge (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass or gauge etc complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

Supply and fixing box type steel windows / Ventilator (factory made) outer frame made out of ERW tube 'P' section 65 X 45 X 25 mm and shutter of ERW tube 'P' section 50mm X 35mm X 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and shown on drawings No CEPZTD-324/07 Sh 1/3 to 3/3 complete all as specified and as directed. Notes: - The quoted rates shall also include: - (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. (ii) 4 no's of MS steel lugs made of 20 X 5 mm Iron flat 200 mm long. (iii) 10 mm Sq Bar grill / guard bar design as per drawing. (iv) PCC block for embedding lugs. (v) Two coats of synthetic enamel paint. (vi) Galvanized mild steel wire clothes power woven 0.46mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Supply and fixing in repairs galvanized mild steel wire clothes power woven 0.46mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Hacking out old broken glass panes (any thickness, size, quality or description) from wooden / steel frames, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in squares not exceeding 0.5 Sqm each pane complete all as specified and directed.

Description all as per Ser Item No 26.00 here-in-before but figured glass, pin head type complete all as specified and as directed.

Supply and fixing 300 mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding door bolt of extruded section complete all as specified and directed.

Supply and fixing aluminium anodised barrel tower bolts 150 mm size and fixed complete all as specified and directed.

Supply and fixing 150 mm aluminium handle fabricated type complete all as specified and directed.

Supply and fixing mild steel enamelled helical door spring 200 / 150 mm (ISI marked) size including roller and roller plate, fixed to wooden / steel frames by any means complete all as specified and directed.

Supply and fixing floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as specified and directed.

Supply and fixing 100mm butt hinges medium weight cold rolled and fixed mild steel hinges complete all as specified and as directed.

Material and labour for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Material and labour for preparing pre-primed steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Supply and fixing mild steel framed works such as grills, framed guard bars and cooler stand similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated etc.) sheets in roof covering including ridge complete all as specified and directed.

Dismantling of plain or corrugated, steel / reinforced fibre glass sheeting any gauge thickness as in roof covering complete all as specified and directed.

Material and labour for asbestos cement sheeting 6mm thick, corrugated or semi-corrugated sheets in roofs, wall etc fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.

Supply and fixing pre-painted galvalume aluminium zinc coated GI based corrugated steel sheeting 0.5 mm thick of any colour having tensile strength 550 Mpa as in roof covering fixed with self tapping screws including ridges complete all as specified and as directed.

Material and labour for asbestos cement two piece adjustable plain ridge 6 mm thickness to suit corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.

Taking down existing old roof treatment work and removing old tar felt, all loose dirt and cleaning the concrete / tiled surface with wire brush and applying neat cement slurry @ 1.5 Kg / Sqm complete all as specified and directed.

Material and labour 20mm thick cement plaster in cement mortar (1:4) over concrete surface finished even and smooth without using extra cement mixed with water proofing compound as per manufacturer's instructions complete all as specified and directed. Note: - Water proofing compound shall be measured and paid separately under respective item.

Supply and applying two coats of un-diluted thick coat of acrylic reinforcement liquid applied elastometric water proofing membrane with UV resistant properties and solar reflective properties over one coat of primer (3:1 water dilution) before applying second coat, insert smart care roof tape corner / joints and allow it to dry then apply further coat complete all as specified and directed. Note: - Every coat time gap should be of minimum 6 hours.

Supply and applying water proofing treatment provided with polymeric water proofing membrane 90 micron weighing not less than 3 Kg / Sqm on prepared surfaces vertical / horizontal laid over a coat of bitumen 85 / 25 @ 1.20 Kg / Sqm, over a coat of bitumen primer 0.50 Kg / Sqm, one coat of bitumen 85 / 25 @ 1.20 Kg / Sqm shall be provided over water proofing membrane as per manufacturer instructions complete all as specified and directed by Engineer-in-Charge.

Supply and fixing cement concrete 25 cm X 25 cm X 22 mm thick machine pressed tile set and jointed in cement slurry and pointed in grey cement mixed with cresote oil including 15 mm thick screed bed in bedding layer of cement mortar (1:4) over water proofing treatment complete all as specified and as directed.

Material and labour for preparation of newly plastered surface of any description and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

Material and labour for preparing new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over and including a coat of 1 mm thick wall care putty complete all as specified and directed.

Material and labour for preparation of new surfaces of ceiling and applying three coats of white washing to ceiling complete all as specified and as directed on ceiling surfaces.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over and including 20mm thick screed bed or bedding layer of mortar (1:4) for laying floor finishes including taking down old stone slabs complete all as specified and directed.

Material and labour for non skid premium quality ceramic coloured tiles (except white / cream) as in floors of size exceeding 0.11 Sqm and not exceeding 0.18 Sqm, 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed or bedding layer of mortar in cement mortar (1:4) for laying floor finishes complete all as specified and directed.

Description all as per Ser item No 52.00 here-in-before but in vertical surfaces with 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.

Material and labour for non skid premium quality ceramic coloured tiles (except white / cream) as in floors of size exceeding 0.06 Sqm and not exceeding 0.11 Sqm, 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15 mm thick screed bed or bedding layer of mortar in cement mortar (1:4) for laying floor finishes complete all as specified and directed.

Material and labour for coloured premium quality glazed ceramic tiles (except white / cream) glossy finish of size 300 x 450 x 7-8 mm thick in dado’s / skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar (1:4) finishing the surface even and rough complete all as specified and directed.

Taking up or down galvanised iron tubing 15mm bore including removal to store complete all as specified and directed.

Taking up or down galvanised iron tubing 20mm bore including removal to store complete all as specified and directed.

Supply and fixing 15 mm bore unplasticised PVC pipes of pressure rating 10 kgf / cm² fixed complete to walls, ceilings or in floors etc, any type of pipe complete all as specified and directed.

Supply and fixing 20 mm bore unplasticised PVC pipes of pressure rating 10 kgf / cm² fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

Supply and fixing in repair 15mm bore bib tap long body cast copper alloy chromium plated fancy type with capstan head handle, screwed down, screwed for brass ferrule and fixed complete all as specified and directed.

Supply and fixing in repairs 15mm bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fixing in repairs gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe all as specifed and as directed.

Supply and fixing in repairs gun metal, globe or gate valve with iron wheel head, 15 mm bore, screwed both ends for iron pipe all as specifed and as directed.

Supply and fixing in repairs 15mm bore angle cock, cast copper alloy chromium plated, fancy type high pressure with capstan head handle, screwed both ends for iron pipe or for unions all as specified and as directed.

Supply and fixing in repairs cast copper chromium plated concealed stop cock screwed down high pressure capstan head with chromium plated flange suitable for 15mm bore pipe marked with hot or cold in the head complete all as specified and directed.

Supply and fixing in repairs 15 mm bore pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

Supply and fixing in repairs shower rose brass chromium plated with swivel joints of size 75 mm dia cast copper alloy chromium plated, fancy type with chromium plated neck 9" long made to shape complete all as specified and directed.

Supply and fixing drapery curtain rod of metallic 25mm dia covered with PVC coating complete with mild steel bracket golden colour rings and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screws complete all as specified as directed.

Dismantling water tanks exceeding 500 and not exceeding 1000 litres complete all as specified and directed.

Supply and fixing 500 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position complete all as specified and as directed.

Supply and fixing in repair PVC lid for poly water storage tanks of capacity 500 litres including PVC hinges and PVC locking both complete all as specified and as directed.

Supply and fixing vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) fixed in repairs complete all as specified and as directed.

Supply and fixing in repairs vitreous chinaware water closet (Squatting pattern) long pan of size 580mm x 440mm Orissa pattern with integral white with ‘P’ or ‘S’ trap front or back inlet and a pair of foot rest complete including provision of cement concrete bedding complete all as specified and directed.

Supply and fixing in repairs PVC valveless syphonic action type low level flushing cistern 8 - 10 litres capacity with inlet, ball valve, float valve, push button type handle including telescopic flush pipe 32mm dia of stainless steel with long bend of 32mm dia complete all as specified and as directed.

Supply and fixing in repairs 15mm dia PVC connection with brass check nut of length 450mm complete all as specified and as directed.

Supply and fixing in repairs 15mm dia PVC connection with brass check nut of length 600 mm complete all as specified and as directed.

Supply and fixing in repairs 32 / 40 mm dia bore PVC flexible pipe for wash hand basin, kitchen sink and urinal complete all as specified and as directed.

Supply and fixing in repair vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including spreader complete all as specified and as directed.

Supply and fixing in repairs vitreous chinaware wash hand basin white, flat back of size 550 x 400 mm excluding tap but including brackets fixing to wall and two No's 10mm dia 100mm long nut and bolt over brackets and chromium plated waste coupling complete all as specified and as directed.

Supply and fixing towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden / Plastic cleats (minimum weight 190 grams) complete all as specified and as directed.

Supply and fixing 600mm long straight shelf of PTMT with and including chromium plated brass screws and wooden cleats (minimum weight 300 gram) complete all as specified and as directed.

Supply and fixing in repair 100 mm dia stainless steel grating with waste hole complete all as specified and as directed.

Supply and fixing in repair 100 mm dia stainless steel grating wihout waste holes complete all as specified and as directed.

Supply and fixing in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 20 mm dia (minimum weight - 210 grams) complete all as specified and as directed.

Dismantling of steel work of any type complete all as specified and as directed.

Supply and fixing rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins etc confirming to Fe 410W- Grade 'E' - 250 quality 'A' complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for cleaning of water storage tank of capacity exceeding 250 but not exceeding 500 litre completely by removing all scale, dirt / dust of any description with chlorine complete, all as directed at site including taking down and refixing of tank at the same place, any damage will be rectified by the contractor at his own risk and cost complete all as specified and directed.

Description all as per Ser item No 89.00 here-in-before but of 1000 litres capacity complete all as specified and as directed.

Taking down eaves, gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store complete all as specified and directed.

Supply and fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and directed.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and directed.

Supply and fixing PVC (SWR) bends 75mm dia complete all as specified and directed.

Supply and fixing PVC (SWR) bends 110mm dia complete all as specified and directed.

Dismantling stone slabs laid dry and tiles of any description or thickness in floors, aprons etc. and rubbish off the premises complete all as specified and as directed.

Material and labour for 100mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in floor, as in sub base complete all as specified and directed.

Material and labour for 100mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in floor, hardstanding and similar work laid in panels finished surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'B' complete all as specified and as directed.

Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size / shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Material and labour for 75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed.

Material and labour for screed bed or bedding layer of mortar 15mm thick for finishes in cement mortar (1:6) screed bed for laying floor finishes complete all as specified and directed.

Material and labour for precast factory made concrete designer chequered tiles any colour on top shape and size not less than 300 x 300 x 25mm thickness complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for providing cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in copings complete all as specified and directed.

Material and labour for providing precast cement concrete louvers and jallies (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate), 25mm thick (measured solid), including all mouldings set in cement mortar (1:4) complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Supply and fixing for framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging and sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing of Fe 290 Grade E-165 complete all as specified and as directed.

Supply and fixing 1mm thick mild steel plain black sheet for steel gates and similar work cut to size holes punched including round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up mitred angles etc as required complete all as specified and as directed.

Supply and fixing for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) Fe-290 (Grade E 165) forming holes, without any attachment fixed to iron gates complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over in reinforcement cut to length, bent to shape required including hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Material and labour for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirupps, spaces and binders cut to length, bent to shape, required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply and fixing for formwork to sides of concrete foundations, footings, bases of columns, of foundation and plinth beam and similar work vertical or to batter for flat rough finished surface of concrete complete all as specified and directed.

Supply and fixing for formwork to sides of pillars, posts, struts, piers, columns and stanchions etc for flat rough finished surface of concrete complete all as specified and directed.

Material and labour for reinforced cement concrete (nominal mix) (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Material and labour for reinforced cement concrete (nominal mix) (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

Material and labour for rendering 10 mm thick in cement mortar (1:4) as backing for receiving tiles complete all as specified and directed.

Material and labour 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Demolition / breaking of drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar and taking out off trenches and removing the debris from the site all as specified of 150mm dia pipe including demolition of cement concrete haunching etc complete all as specified and directed.

Material and labour concrete bed to 150 mm bore pipe (1:4:8) in type D-2 (using 40mm graded crushed stone aggregate) including haunching against the sides of pipe complete all as specified and directed.

Supply and fixing 150mm dia reinforced concrete pipes, class NP-2, laid and jointed complete with collars complete all as specified and directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - All plumbing works shall be laid or fixed as to be completely air tight or water tight as specified and Contractor will furnish its certificates towards air / water tight before completion of work under the Contract. NOTE NO 4: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

PAKAYA BUILDERS AND DEVELOPERS PVT LTD

M/S PARAMJEET SINGH

M/S Shesh Paul Gupta

Bidder Name

M/S Shesh Paul Gupta

M/S PARAMJEET SINGH

PAKAYA BUILDERS AND DEVELOPERS PVT LTD

M/S A TO Z ENGINEERS