SPECIAL REPAIR TO BLDG NO P-99/1 TO 99/6 AT II LINE OF B COY 5221 ASC BN (MT) AT NASIRABAD

Amount

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and directed.

Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to course built in cement or cement lime mortar complete all as specified and directed.

M&L for raised pointing in CM (1:4) to random or polygonal rubble, uncoursed or brought up to course complete all as specified and directed.

M&L for 50mm thick Cement concrete 1:3:6, type C-1 using 20mm graded aggregate as in floor/ plinth protection incl 6mm wide & 15mm deep groove finishes fair and even complete all as specified and directed.

M&L for hardcore of broken stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and including screed bed 15cm in CM (1:6) complete all as specified and directed.

M&L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) size 0.18sqm but not exceeding 0.38 sqm as in skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and including 10mm thick plaster CM (1:4) complete all as specified and directed.

M&L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm screed bed in CM (1:6) complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) as in bedding layer for laying & fixing floor as in levelling course complete all as specified and directed.

M&L for Glazed Coloured Ceramic tiles in vertical surface 7mm thick, area of each tiles exc 0.11sqm but not exceeding 0.18 sqm set and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick cement plaster in CM (1:4) complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete fixed over and including 15mm screed bed in CM (1:6) complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2 1:4:8 using 40mm graded aggregate , as in sub base. complete all as specified and directed.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for kota stone slab 20-25mm thick in riser or steps, cill single piece, skirting, dado and pillar laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete fixed over and including 10mm plaster in CM (1:4) complete all as specified and directed.

M&L for 20mm thick marble tiles in riser or steps, skirting, window cill in single piece, dado and pillar etc set and jointed in neat cement slurry mixed with pigment to match the shade of the slab over and including 10mm thick cement mortar 1:6, complete including necessary bull nosing of steps comlete all as specified and directed.

M&L for taking down cement or cement lime plaster of any description incl dado/ skirting of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of stone masonary surfaces, finished even and fair complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of stone masonary surfaces, finished even and fair complete all as specified and directed.

M&L for rendering in cement mortar (1:3) 5 mm thick as in ceiling surfaces finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for preparation of new plastered surfaces including primer preparatory to distempering and applying two coats of oil bound distemper on walls over 3.0mm thick white cement based wall care putty complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of white wash on wall complete all as specified and directed.

M&L for prepration of new plastered surface as in ceiling and applying two coat of white wash complete all as specified and directed.

M&L for applying two coats of cement base paint, white or tinted on new or old wall surface including preparation of surface complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and directed.

M&L for rolled mild steel work angle iron as in door frame (Chowkhats) including provn of 10mm dia deformed bar welded horizontally to bottom of frame conforming to Fe-290 ( Gde 165-E ) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.

S&F hold fast of flat iron conforming to Fe-290 (Gde-E-165) including preparing the surfaces & treated with two coats for coaltar & sanded with clean sharp sand complete all as specified & directed

S&F 35mm thick, 2nd class HW, plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F IInd Class HW 35mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkhats complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet as reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F Mild steel sliding door bolts 300mm, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F ISI Marked 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and directed.

S&F 125mm aluminium handles, cast type, anodised complete all as specified and directed.

S&F 100mm size stainless steel butt hinge complete all as specified and directed.

S&F single action spring hinge, 125mm size, mild steel with steel wire spring, stove enamelled black fixed to angle iron door frame by welding complete all as specified and directed.

S&F Iind Class Hard wood small fittings such as brackets of any type, latch and hinges blocks , shaped door and window stops and the like, incl all necessary labours; article n.exc 200cu.cm each complete all as specified and directed.

S&F MS butt hinge 50mm medium weight cold rolled incl necessary welding etc complete all as specified and directed.

Taking down old u/s wooden window and S&F Steel window/ ventilator glazed and gauged (combination) with side hung/ top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame complete incl necessary cooler arrangement in window & guard bars all as shown in drg No. CEBZ/TD/14/11 sh No 1/7 to 7/7 complete all as specified and directed.

S&F 3mm thick sheet glass plain/ pin headed, ordinary quality and glazing with oil putty in square nexc 0.50 Sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for rolled mild steel work angle iron, flat iron as in door frame with gusset plates complete, drilled for fixing of steel sheeting or other covering conforming to Fe-290 ( Gde 165-E ) complete all as specified and directed. Note: Weight shall be verified by the GE.

M&L for Mild steel, plain, 1.00 mm thick black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

S&F IInd class hardwood chowkhats and frames in cupboard plain fillets, square, rectangular or triangular in section (exc 13 sq.cm n. exc 25 sq.cm) clean sawn, with glue, pinned at joints and fixed with screw complete all as specified and directed.

M&L for 18/19mm thick prelaminated MDF board, exterior grade - prelaminated one sides with decorative choice laminations & other side with balancing white, fixed with screws, with & including teak wood lipping 19 x 6mm thick fixed with nails in shelves, partition and pelmet boxes, cupboard, shelves, almirah book cases, toilet boxes, racks, cup board shutter and similar works complete all as specified and directed.

S&F magnet door catcher 30mm size of approved quality and suitable for cupboard shutter and cabinet, complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flaps when open in 30mm complete all as specified and directed.

S&F 100mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 100 mm aluminium handles, cast type, anodised complete all as specified and directed.

M&L for preparation of newly surfaces and apply two coats of synthetic enamel paint over a coat of pink primer of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

M&L for prepration of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

M&L for 18 to 20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick Screed in CM (1:4) complete all as specified and directed.

M&L for 50mm thick sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4, complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete including waste pipe complete all as specified and directed.

S&F stainless steel kitchen plate rack made out of 0.63mm thick sheet of size 765x920x220 mm deep of approved pattern & make and wt not less than 7.0 Kg each complete all as specified and directed.

S&F 25mm dia, MS powder coated tubular curtain rail as fixed in repairs complete all as specified and directed.

S&F MS powder coated brackets for tubular curtain rail 25mm dia as fixed in repair complete all as specified and directed.

S&F framed work such as grills, gratings, cooler stand etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Taking down existing water proofing treatment of any description incl PCC padding, cement plaster any thickness from roof surfaces, cleaning of roof and prepairing it for further treatment incl make good necessary dubbing out wherever required and removing rubbish from site complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:4 mixed with water proofing compound @ 3% by weight of cement on fair faces of RCC/ Stone patti roof surfaces finished even & smooth without using extra cement complete all as specified and directed Note: WPC shall be measured and paid separately.

M&L for roof treatment with APP modified polymeric water proofing membrane, 2mm thick having centre core not less than 100 micron high molecular high density polyethylene film (HMHDPE) film protected from both sides with high polymeric asphaltic mix and 20 micron HMHDPE film weight not less than 3 Kg/ Sqm applied with bonding material using blown type bitumen conforming to IS-702 Grade 85/25 @ 1.20 Kg/ Sqm over bitumen primer conforming to IS- 3384 @ 0.40 Kg/ Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg/ Sqm over APP membrane with all overlaps complete all as specified and directed.

M&L for 40mm thick (average consolidated thickness) PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) laid in slope as in padding, finished even and smooth on existing slope including provision of 'V' shaped groove 6mm wide and 10mm deep at 0.60 metre interval or parts thereof, both ways on top of PCC padding and filled with mastic bitumen of (1:1) proportion complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Re-fixing old steel tubing and connection in new or old position (Wall, ceiling, floors etc) of 15mm bore complete all as specified and directed.

Supplying and laying GI tubing Dia 15mm medium weight incl fittings on walls / ceilings or laying in floors complete all as specified.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

Re-fixing old steel tubing and connection in new or old position (Wall, ceiling, floors etc) of 20mm bore complete all as specified and directed.

Supplying and laying GI tubing Dia 20mm medium weight incl fittings on walls / ceilings or laying in floors complete all as specified and directed.

Taking up or down 25 or 32mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Re-fixing old steel tubing and connection in new or old position (Wall, ceiling, floors etc) of 25 to 32mm bore

Supplying and laying GI tubing Dia 25mm medium weight incl fittings on walls/ ceilings or laying in floors complete all as specified.

S&F in repair 25mm bore gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified & directed.

S&F in repair 20mm bore gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified & directed.

Dismantling existing unserviceable RCC/ PVC water tank and S&F rotational moulded synthetic (HDPE) water storage tank 500 litre capacity hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed.

S&F in repair ISI Marked 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repair Vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PVC SWR P or S trap complete all as specified and directed.

S&F 10 ltrs capacity PVC Valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets flushing cistern and flushing pipe of suitable length including PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F vitreous China wash basin, white, flat back, size 550x400mm including PVC connections 15mm size with PTMT nuts of length 450mm and 40mm pvc waste pipe of suitable length, brackets,and cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F ISI marked 15mm Pillar cock fancy type, cast copper alloy, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long shanks , screwed for iron pipe and fixed complete all as specified and directed..

S&F Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F ISI marked 15mm bore stop valves/ angle cock concealed fancy type, cast copper alloy, chromium plated with long shank and cup screwed both ends for iron pipe or for unions and fixed complete all as specified.

S&F ISI marked 15mm bore stop valves/ angle cock fancy type, cast copper alloy, chromium plated with screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair ISI marked 15mm bore, fancy type bib tap of cast copper alloy long body with flange, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required (Internal dia of pipe in 100mm)complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with clamps complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends of any radius with access door, complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece, single T or single Y equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends of any radius with access door, complete all as specified and directed.

M&L for PVC (SWR) gully trap 125/110mm with grating, setting in PCC and jointing with solvent cement complete all as specified and directed.

M&L for 75mm bore PVC (SWR) floor trap/ Multi trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Demolition of Brick or Stone Masonary built in cement mortar etc complete complete all as specified and directed.

M&L for brickwork with subclass `B` fly ash bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brickwork with subclass `B` fly ash bricks, in straight or curved on plan to any radius in half brick thick, built in CM 1:4 complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels and drains incl formwork, complete all as specified and directed.

M&L for PCC 1:2:4 Type B1 (using 20 mm graded crushed stone aggregate) as in coping, edging rounded or chamfered type etc, complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces Cement plaster 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

Add or deduct for each 25mm girth or part over or under 30cm complete all as specified and directed.

Demolition, reinforced cement concrete roofs, floors (other than ground floors), beams, staircases, landing, parapets, chajjas, and similar suspended work cut as required to facilitate demolition complete all as specified.

M&L for RCC 1:2:4 Type B0 (using 12.5mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, parapets, lintels over 1.5m span etc, including formwork complete all as specified.

M&L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, holders, regulators, sockets etc., removing materials from site.

Disconnecting unserviceable sub main wiring of any size complete including conduit and accessories and removing from site.

Disconnecting and taking down unserviceable service connection of any size incl house service bracket and removing from site.

Taking down MCB DB's complete with MCB's/ Isolator etc, removing materials from site and making good disturbed surface of walls, floors etc.

M&L for point wiring with 1.5 Sqmm, PVC insulated, unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit 20 mm dia or higher complete with all PVC conduit accessories and sunk type anodised steel terminal box 1.2 mm thick with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories for:-

One light point/ bell point controlled by one, one way switch.

One ceiling fan point controlled by one, one way switch.

One three pin 5 Amp socket on same board with other switches.

One 3 pin 5 Amp socket on independent board.

Ditto all as per item No. 112.04 here-in-before but with 2.5 Sqmm, for one 5 pin 5/15 Amp socket on independent board including 2.5 Sqmm stranded copper conductor (FRLS) PVC insulated green in colour as continous earth conductor connected to common earth.

S&F sub main wiring with two runs of single core PVC insulated and unsheathed multistranded (FRLS) copper conductor cable of size 6.00 Sqmm LT, 1100 volts grade, drawn through and including 25 mm dia or higher PVC non metallic concealed conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 6 sqmm single core multistranded copper conductor cable green colour as earth continuity conductor.

S&F Switch piano, flush type, single pole, one way, 5 Amps, 240 volt, 50Hz, AC, complete all as specified and as directed by Engr-in-Charge. Make:- Havells/ SSK/CONA

S&F switch piano flush type 15 amps, single pole one way 240 volts complete all as speciied and directed by Engr-in-Charge. Make:- Havells/ SSK/CONA

S&F bell push piano flush type 5 Amp complete all as speciied and directed by Engr-in-Charge. Make:- Havells/ SSK/CONA

S&F Socket outlet 3 Pin 5/6 Amp flush type complete all as speciied and directed by engr-in-Charge. Make:- Havells/ SSK/CONA

S&F socket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type complete all as speciied and directed by Engr-in-Charge. Make:- Havells/ SSK/CONA

S&F ceiling fan regulator electronic flush , steped (four step) 230 Volts AC complete all as speciied and directed by Engr-in-Charge. Make:- Havells/ SSK/ CONA

S&F ceiling rose surface bakelite 3 terminals 63.5 x 17 mm complete all as speciied and directed by engr-in-Charge Make:- Havells/ SSK/ CONA

S&F door bell ding dong type electric 230 volts AC , single phase, complete all as specified and directed by Engr-in-Charge. Make:- Havells/ SSK/CONA

S&F lamp holder PVC/polycarbonate type with back plate complete all as speciied and directed by Engr-in-Charge. Make:- Havells/ SSK/CONA

S&F LED lamp 9/11 watt suitable for 230 volts , 50 Hzs complete all as specified and directed. Make: Havells/Bajaj/Wipro

S&F LED tube light fitting box type 1x 18 watt, 230V for single LED tube light including 1 x 18 W LED retrofit tube rod , 6500 K , bipin holders,LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as speciied and directed by Engr-in-Charge. Make: Bajaj Cat Part No BLRB 18W CWc for tube , BLRB - DB 118 for batten , Havells Cat part No PHOTONULTRA1213T8LLSSTL18WLED865SPC (for tube) REGALBATTENT8UPTO1X18WDSBSWH (for batten) or equivalent model of Wipro

S&F wall mounted decorative luminarie fitting with brass made bracket with 115 mm dia round base , brass arm length 57mm , provided with 78mmx 76mm breadth gallary , indiside 2 pin brass holder, frosted glass shade 170 mm length incl LED lamp 5 watt complete all as specified and directed. Make: Mepro Cat Part No. MBBS-802 or equivalent model of Havells/ Bajaj

S&F aesthetically designed linear LED mirror light fitting 10 Watt with white acrylic cover complete all as speciied and directed by Engr-in-Charge. Make- Bajaj/ Crompton/ Wipro

S&F LED bulk head luminaire 1x 10 W bulk, IP 65 protection complete with all accessories and including connecting up with three core copper conductor cable complete all as specified and directed by Engr-in-Charge. Make: Havells/Jaquar/Crompton

Disconnecting and taking down existing electric meter and refixing the same electric meter, connecting, testing and sealing properly and making good disturbed surface of walls etc.

Taking down existing ceiling fan , dismantling blades and refixing after cleaning incl conecting up with three core flexible cable from ceiling rose to fan .

S&F MCB distribution board TPN 4 way, 415 volts, double door, with 200 Amps rated bus bar, neutral bar with shrouds, earth bar, IP-43 , made out of sheet steel enclosure, recessed type, factory made powder coated suitable for housing MCBs as incomer and outgoing including blanking plate complete all as specified and directed by Engr-in-Charge. . Make: Legrand/Schneider/Seimens Note: MCB DB and MCB SP/SPN will be of same make.

S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door IP-43 DB's , made out of sheet steel enclosure, recessed type, factory made powder coated 8 way, 240 volts suitable for housing MCB's complete all as specified and directed. Make: Legrand/Schneider/Seimens Note: MCB DB and MCB SP/SPN will be of same make.

S&F MCB SP, 240 volt, 3 Amp to 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge. . Make: Legrand (DX-3), Schneider (Acti-09), Siemens (Betagard)

S&F MCB SPN, 240 volt, 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge by Engr-in-Charge. Make: Legrand (DX-3), Schneider (Acti-09), Siemens (Betagard)

S&F MCB TPN, 415 volt, 63 Amp capacity,10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge. Make: Legrand (DX-3), Schneider (Acti-09), Siemens (Betagard)

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15 mm bore and water pipe 20 mm bore GI med grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover with handle all as specified and shown in elect plate No 3 of SSR Part-I of 2009 incl dismantling of old unsv existing earthing .

Supply and laying XLPE insulated heavy duty armoured electric cable with stranded aluminium conductor 1100 Volt grade ,cross sectional area 16 Sq mm 4 core complete all as specified and directed by Engr-in-Charge. .

Excavation in trenches in any type of soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth and getting out complete all as specified and directed by Engr-in-Charge.

M&L for filling clean and dry sand cushioning for cable in trenches all as specified and directed by Engr-in-Charge. . Note: Punned thickness shall be measured & paid.

Returning, filling in , including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed by Engr-in-Charge.

Removal of surplus soil as obtained from excavation to a distance not exc. 50 Mtr and depositing where directed at a level not exc. 1.5 Mtr above the starting point complete all as specified and directed by Engr-in-Charge.

Supply and laying bricks old class ‘B’ as protect on to UG cable laid flat adjoining to each other width wise complete all as specified and directed by Engr-in-Charge.

S&F tubes light grade GI 40 mm dia with all fitting for cable protection under floor/ under road/ on wall/ on pole complete all as specified and directed by Engr-in-Charge.

Note for all items: All items shall be executed as specified and directed by Engr-in-charge.

Pioneer Enterprises

M/s Jai Jinendra Constructions

kirtiman traders

V K LAKWAL CONSTRUCTIONS

M/S Nexus Projects

M/S JAGDISH PRASAD AIRUN

M/s SUNIL ENTERPRISES

M/S Bansal Construction

MITTAL ENTERPRISES