GE/863/EWS-T-51/2019-20

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.) of insulation boards/slabs/bankets, any thickness, including cover fillets complete all as specified and as directed by Engr-in-Charge.

Dismantling timber scantlings 40 sqcm and over in section in framed work complete all as specified and directed by Engr-in-Charge.

All as per item No 2 here-in-before but in fillets, rails, posts, ragters purlins etc under 40 sqcm in section in any position as in framed work.

Demolition Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as specified.

Demolition of cement concrete (reinforced) of any description and in any position no otherwise specially provided for.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Naintal or similar pattern roof coverings.

Dismantling wrought iron or mild steel work of any description not otherwise porvided for.

Dismantling of cast iron or reinforced concrete drain pipes of internal dia 100 mm, jointed in cement mortar and taking out of trenches, if required.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store.

Dismantling water tanks of capacity exc 500 & n exc 1000 litres and removing to store.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc.

Taking down chowkats or frames not exc 1.5 sq.m each but with shutters (without taking off shutters from the frames).

Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 sq.m each but with shutters (without taking off shutters from the frames).

S & F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 13 & n.exc 25 sq.cm complete all as specified and directed.

M & L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work as in ceiling complete all as specified and directed.

M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 3 & n.exc 6 sq.cm complete all as specified and directed.

M & L for 12mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work as in partition wall complete all as specified and directed.

M &L for pre-cast cement concrete type C1 1:3:6 using 20mm graded stone aggregate as in block masonry with solid blocks, exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster 1:4 using WPC 3% by weight of cement (WPC to be measured and paid separately) and finished even and smooth (without using extra cement).

M & L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement).

Supply only integral water proofing compound of approved brand/make.

M & L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering complete all as specified and directed.

M & L for preparing new plastered or previosly untreated walls surfaces andapplying two coats of cement base paint completeall specified and directed.

M and L 20-25mm thick Machine cut kota stone slab flooring laid over & including 20 mm thick screed bed in cement mortar 1:6 jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,rounding to exposed edges and polishing in granite finish complete all as specified and directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6.

M & L for glazed ceramic coloured tiles in vertical surface 300 x 200 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed bed in cement mortar 1:4.

M & L for chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry over and including15mm thick screed bed in cement mortar 1:6 as in floors with grey cement and pigment complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregate as in floor, including rough finished with out using extra cement.

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in base floor for laying chequered tiles.

M &L for 40 mm thick cement concrete type B-1, 1:2:4 using 20 mm graded stone aggregate finishing surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

S & F rolled mild steel in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe 410-W (Gde-E-250 quality-A) complete all as specified and directed.

S and F of 0.63 mm thick Galvanised, corrugated mild steel sheeting with two rugations side lap, using grade of zinc coating 275. inclusive of both side fixed with L-type or J-type orcranked hook bolts and washers as in roof covering etc comlete all as specified

Fixing only sheeting (any thichness ) with two corrugation side lap using grade of zinc coating 275. Inclusive of both side fixed with L-type or J-type orcranked hook bolts and washers as in roof covering etc comlete all as specified

M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer.

-Ditto- all as per item No 39 above but one coat of synthetic enamel paint on old steel surfaces of any description.

S & F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M &L for RCC 1:2:4 type B-1 (20 MM graded stone agg) as in beam cantilevers,bressummers, lintels etc complete all as specified and directed.

.M & L for Use and waste of formwork to chullah hoods chajja troughs and similar items including edges in rough finished surfaces of concrete complete all as specified and directed.

M & L for Use and waste of formwork to sides and sffits of floor or roof beam, beam haunchings,girders bressummers,lintels,bands contilevers,shelves including supports ,overhangs etc.also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

M & L 100 mm bore cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors.

-Ditto- all as per item No 45 above but fixed to walls.

S & F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured).

S&F 75mm PVC(SWR) floor trap,plain with grattings incl jointing with solvent cement complete all as specified and directed.

S & F 100mm bore cast iron cowls.

S & F 20mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors.

Fixing only 20mm bore tubes any grade to walls and ceilings or laying in floors.

S & F 15mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors.

S & F 1000 litres capacity rotational moulded polyethylene double layered water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified and directed.

S & F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S & F in repair 15mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S & F in repair 20mm bore ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed.

S & F 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc edges of framing plain, chamfered or rounded, fitted with cut and mitred beads of securing glass, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, provided with stiles and rails complete fitted to chowkats.

S&F flush shutters 30 mm thick solid core construction,with block board core and plywood face panels,commercial type on both sides.

S & F clamps, hold fast,hook washer & similar small articles conforming to Fe-290 Gde-E-165.

M & L for providing cement concrete type C1 1:3:6 using 20mm graded stone aggregate as in hold fast blocks.

S & F 100mm butt hinges, medium weight, cold rolled mild steel and fixed.

-Ditto- all as per item No 61 above but 75mm long.

S & F 300mm aluminium alloy, anodised, sliding door bolt hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

S & F 150mm extruded aluminium handles, fabricated type anodised.

S & F 125mm extruded aluminium handles, fabricated type anodised.

S & F 200mm aluminium, anodised, barrel tower bolts of extruded section and fixed.

S & F 150mm aluminium, anodised, barrel tower bolts of extruded section and fixed.

S & F mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate complete.

S & F aluminium (extruded section) body door closer hydraulically regulated designation 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed.

M & L sheet glass, 4mm thick ordinary quality and glazing with oil putty or beadings in square not exc 0.5 sqm in each pane.

M & L for preparation of wood and wood based materials, new or old surface of any description and girth not otherwise described and treated with two coats of creosote oil complete all as specified and directed.

M & L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of prink primer all as specified and directed.

-Ditto- all as per item No 72 above but one coat of synthetic enamel paint on old wooden surfaces of any description.

S & F in repairs vitreous china wash down water closet pan (pedestal pattern) white complete all as specified and directed .

S & F in repairs plastic water closet seat cover, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging deviced complete all as specified and directed .

S & F in repairs Pvc valveless, syphonic action type, 10 ltr flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, CP down pipe and connceting to the WC and making good to the floor with PCC complete all as specified and directed .

S & F toilet paper holder , vitreous china box type fixed to wall with chromium plated brass screws in repairs

S & F in repairs vitreous China wash basin, white, flat back, size 550 x 400 mm including a pair of bracket, 32mm dia CP waste screwed to iron pipe complete all as specified and directed.

S & F in repairs 15mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed.

S & F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S & F inrepair 15 mm bore bib taps chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe ir brass ferrule and fixedas specified and directed.

S & F in repairs stop valves, 15mm dia chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed..

S & F PVC connections 15mm size with PTMT nuts of lengh 600mm.

S&F tublar towel rail 20m dia of brass chromium plated 'D' type 60cm long between angles incl takig down the old all as directed.

S&F in repair 19mm dia curtain rods fancy type, mild steel chromium plated with fixing brackets, stops, rollers all as specified and as directed by Engr-in-charge.

Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith compete fittings such as switches ,ceiling rose, pendent holder, sketch fitting & regulator etc. including making good to the disturbed surfaces of wall, roof and floor etc. to match with the existing surfaces complete all as specified and directed by Engineer-in-Charge.

Taking down unserviceable submain wiring and service cable alongwith batten /PVC conduits etc. and making good disturbed surfaces of walls/floors and match the existing surface all as directed at site.

Taking down unserviceable main switches, DBs with MCB SP/Isolators by unscrewing form board complete all as specified and directed by Engineer-in-Charge

M&L for point wiring with using approved colour coding as per IS, FRLSH, 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision PCV Box on top for fixing switches sockets etc. all as specified for one light point/ fan /Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 90 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with cable 2.5sqmm including provision of 1.5 sqmm single core multistanded PCV insulated copper conductor as earth conducting conductor complete all as per specified and directed by Engineer-in-Charge.

All as per Srl item No 90 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the independent board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge.

All as per Srl item No 90 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the same board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge.

Supply and fixing of switch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge,

Supply and fixing of socket outlet 6 pin 5 & 15 Amp 2-in-one 230 Volt flush type complete all as specified and directed by Engineer -in-Charge.

Supply and fixing of socket outlet 6 pin 5 Amp 230 Volt flush type complete all as specified and directed by Engineer -in-Charge.

Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge,

M&L Ceiling rose, 3 terminal with ISI mark all as specified and directed by Engr-In-Charge.

Supply and fixing surface & wall mounted LED 20W tube light fitting batten 4 feet, mirrorlite slim type with extruded aluminium housing alongwith 20W LED lamp PC body with all accessories all as specified and directed by Engg-in-Charge. Make: Crompton Cat No. DMLN1LT8-16 and Tube lamp Cat Part LT8-20-865-2 or equivalent make as listed in Appx 'B'.

Material and labour for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings.

Supply and fixing LED lamp 9W retrofit type,output lumen 850 with 6500K CC7, all as specified and directed by Engg-in-Charge. Make:Havells Cat part No-LHLDEUEEML8R009 or equivalent make as listed in Appx 'B'.

Supply & Fixing bulk head light with LED type 10 watt , environment friendly,e nergy saving, surface mounted decorative oal bulk head edge lit LED luminare comprising of high brighteness LEDs complete all as specified. Make Havells Cat Part RUGBYNEONFT10WLED860SSYMTOPC or equivalent make as listed in Appx 'B'.

Supply,fixing, Testing water heater storage type with multifunctional safety valve, electric operated 230 V, Single Phase complete including one no of heating element, automatic, thermal cut out, fusible plug, anti vacum sys, built in presser release valve,thermostat, rust proof powder coated body, indicator lamps and all safety advices as per E-in-C's Branch technical instructions and of capacity 25 liters Gyser 5 star rating including taking down existing old U/S water heater & provn of grouting bolts in walls including piller cock , pvc connection ect and making good disturbed surfaces. Make : refer Appx 'B' attached.

S&F for exhaust AC, Single Phase 300mm sweep, with louvre including dismantling existing old u/s exhaust fan complete all as per specified and directed by Engineer-in-Charge.

Supply and fixing of sheet metal enclosure single door for DBs double door pole and neutral for 4 way 240 volt with 200 amp copper bus bar neutral & earth link complete all as specified and directed by Engineer-in-Charge

S&F MCB 40 Amp 10 KA C series all as specified

S&F MCB SP 6 Amp to 20 Amp, 10 KA.

S & F Sheet metal enclosure with three pin and earth, lug and socket, single pole 230 volt 10 Amps MCB's. complete all as specified.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 16 Sqmm complete

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below the ground level with top edge of the plate not less the 1.5 mtr below the normal ground level connected to the galvanised earth wire 4 mm dia by means of bolts, nuts and washers of galvanization of steel including PCC pit in PCC 1:2:4 type B-I pre cast RCC cover slab using reinforcement with weighting no less than 1.87 Kg/cm2 with suitable handle made of 12mm round bar including necessary excavation and earth wire in any type of soil 20 mm dia med grade galavanised steel tubing for watring with one end fixed to cast iron funnel and wire mesh 15 mm bore light grade galvanised steel tubing up to 5m length for drawing earth lead wire protection, common salt charcoal etc. all as shown in electrical plate no 3 connected to earthing testing point all as specfied or indicated including testing on completions.

Net Contract Sum will be after deducting Sch Of Creditof Rs. 39539.50

M/S SHIV NATH ENTERPRISES