CONSTRUCTION OF FACEAL SLUDGE TREATMENT PLANT AT CLUSTER- MEHUNBARE TAL. CHALISGAON

30 KLD FSTP AT CLUSTER - MEHUNBARE Tal. CHALISGAON Item No.1:- Subwork:- Unloading Platform Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0.00 to 1.50 m

Item No.2:-Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting,etc.complete.(Bd-A-12/264) Soiling

Item No.3:-Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150

Item No.4:-Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. or Tor Reinforcement Raft In RCC M-300

Item No.5:-Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Steel

Item No.6:-Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction,etc.complete.(Bd-A-11/263)

Item No.7:-Structural Design 2% of RCC cost

Item No.1:-Subwork:- Screen Chamber Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0.00 to 1.50 m

Item No.2:-Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd A-2/259) Lift 0.00 to 1.50 m

Item No.3:-Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in Lift 0.00 to 1.50 m

Item No.4:-Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting,etc.complete.(Bd-A-12/264) Soiling

Item No.5:-Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150

Item No.6:-Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. or Tor Reinforcement Raft In RCC M-300

Item No.7:-Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements) RCC M-30 Vertical Wall

Item No.8:-Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction,etc.complete.(Bd-A-11/263) Filling

Item No.9:-Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Steel

Item No.10:-Providing and applying water proofing treatment using acrylic polymer modified cementbasedwater proofing coatingwith fibre glass meshmixing at the rate of powder to liquid(2:1) byweight covering 9 to 10 SquareMetre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete

Item No.11:-Structural Design 2% of RCC cost

Item No.1:-Subwork :- Sludge Storage Tank Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0.00 to 1.50 m

Item No.2:-Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (BdA-2/259) Lift 0.00 to 1.50 m

Item No.3:-Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in Lift 0.00 to 1.50 m

Item No.4:-Lift 1.50 to 3.00 m

Item No.5:-Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259) Lift 1.50 to 3.00 m

Item No.6:-Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting,etc.complete.(Bd-A-12/264) Soiling

Item No.7:-Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150

Item No.8:-Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. or Tor Reinforcement Raft In RCC M-300

Item No.9:-Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements) RCC M-30 Vertical Wall

Item No.10:-Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements) RCC M-30 Slab

Item No.11:-Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Steel

Item No.12:-Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-11/263) Filling

Item No.13:-Providing and fixing in position steel concrete (S.F.R.C.) frame and fibre covers reinforced of approved make including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer-in-charge (20 tonnes capacity). d) 90 x 60 cm size SFRC Cover

Item No.14:-Providing and applying water proofing treatment using acrylic polymer modified cementbasedwater proofing coatingwith fibre glass meshmixing at the rate of powder to liquid(2:1) byweight covering 9 to 10 SquareMetre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete

Item No.15:-Structural Design Charges = 2 % of Cost of RCC work Item No.3,4,5&7

Item No.1:-Subwork :- Multi Disc Screw Press Platform Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0.00 to 1.50 m

Item No.2:-Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd A-2/259) Lift 0.00 to 1.50 m

Item No.3:-Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264) Soiling

Item No.4:-Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150

Item No.5:-Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. or Tor Reinforcement Raft In RCC M-300

Item No.6:-Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements) RCC M-30 Vertical Wall

Item No.7:-Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements) RCC M-30 Slab

Item No.8:-Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete.(including cost of binding wire) Steel

Item No.9:-Providing stuctural steel work in single stanchions composed of RSJ, channel, etc, with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, etc. as per detailed design and drawing or as directed by Engineer-in-charge including cutting, fabrication, hoisting, erecting, fixing in position, making riveted/bolted / welded connections and one coats of anticorrosive paint and over it two coats of oil painting, etc. complete. Structural Steel

Item No.10:-Providing stuctural steel work in single stanchions composed of RSJ, channel, etc, with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, etc. as per detailed design and drawing or as directed by Engineer-in-charge including cutting, fabrication, hoisting, erecting, fixing in position, making riveted/bolted / welded connections and one coats of anticorrosive paint and over it two coats of oil painting, etc. complete. Structural Steel

Item No.11:-Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and GI Sheet

Item No.12:-Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-11/263) Filling

Item No.13:-Structural Design 2% of RCC cost

Item No.1:-Subwork:- Liquid Storage Tank Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0.00 to 1.50 m

Item No.2:-Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd A-2/259) Lift 0.00 to 1.50 m

Item No.3:-Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in Lift 0.00 to 1.50 m

Item No.4:-Lift 1.50 to 3.00 m

Item No.5:-Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259) Lift 1.50 to 3.00 m

Item No.6:-Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264) Soiling

Item No.7:-Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150

Item No.8:-Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. or Tor Reinforcement Raft In RCC M-300

Item No.9:-Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements) RCC M-30 Vertical Wall

Item No.10:-Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements) RCC M-30 Slab

Item No.11:-Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Steel

Item No.12:-Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-11/263) Filling

Item No.13:-Providing and fixing in position steel concrete (S.F.R.C.) frame and fibre covers reinforced of approved make including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer-in-charge (20 tonnes capacity). d) 90 x 60 cm size SFRC Cover

Item No.14:-Providing and applying water proofing treatment using acrylic polymer modified cementbasedwater proofing coatingwith fibre glass meshmixing at the rate of powder to liquid(2:1) byweight covering 9 to 10 SquareMetre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete

Item No.15:-Structural Design Charges = 2 % of Cost of RCC work Item No.3,4,5&7

Item No.1:-Subwork :- Zinc Alluminium Tank Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0.00 to 1.50 m

Item No.2:-Soiling Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete.(Bd-A-12/264) Soiling

Item No.3:-Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150

Item No.4:-Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. or Tor Reinforcement Raft In RCC M-300

Item No.5:-Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Steel

Item No.6:-Providing stuctural steel work in single stanchions composed of RSJ, channel, etc, with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, etc. as per detailed design and drawing or as directed by Engineer-in-charge including cutting, fabrication, hoisting, erecting, fixing in position, making riveted/bolted / welded connections and one coats of anticorrosive paint and over it two coats of oil painting, etc. complete. Structural Steel

Item No.7:-Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and GI Sheet

Item No.8:-Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-11/263) Filling

Item No.9:-Supply and installation of prefabricated ground water storage bolted tanks, acomplete package in knock down, ready to assemble construction consisting of outer wall surface made out of special grade hot dip aluminum Zincalloy, metalic factory coated steel confirming toIS-15961 2012, minimum thickness of 0.6 mm. The inner surface should be provided withliners of minimum 0.6 mm thickness of reinforce polyethylene or polye propelene or metallocene material suitable for drinking water purpose. etc. complete. 35914 Litre (Zinc Tank)

Item No.10:-Structural Design Charges = 2 % of Cost of RCC work Item No.3,4,5&7

Item No.1:-Subwork:- Filter Teed Tank Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0.00 to 1.50 m

Item No.2:-Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd A-2/259) Lift 0.00 to 1.50 m

Item No.3:-Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in Lift 0.00 to 1.50 m

Item No.4:-Lift 1.50 to 3.00 m

Item No.5:-Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259) Lift 1.50 to 3.00 m

Item No.6:-Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264) Soiling

Item No.7:-Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150

Item No.8:-Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. or Tor Reinforcement Raft In RCC M-300

Item No.9:-Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements) RCC M-30 Vertical Wall

Item No.10:-Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements) RCC M-30 Slab

Item No.11:-Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Steel

Item No.12:-Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete.(Bd-A-11/263) Filling

Item No.13:-Providing and fixing in position steel concrete (S.F.R.C.) frame and fibre covers reinforced of approved make including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer-in-charge (20 tonnes capacity). d) 90 x 60 cm size SFRC Cover

Item No.14:-Providing and applying water proofing treatment using acrylic polymer modified cementbasedwater proofing coatingwith fibre glass meshmixing at the rate of powder to liquid(2:1) byweight covering 9 to 10 SquareMetre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete

Item No.15:-Structural Design Charges = 2 % of Cost of RCC work Item No.3,4,5&7

Item No.1:-Subwork:- Treated Water Tank Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0.00 to 1.50 m

Item No.2:-Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd A-2/259) Lift 0.00 to 1.50 m

Item No.3:-Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in Lift 0.00 to 1.50 m

Item No.4:-Lift 1.50 to 3.00 m

Item No.5:-Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259) Lift 1.50 to 3.00 m

Item No.6:-Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting,etc.complete.(Bd-A-12/264) Soiling

Item No.7:-Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150

Item No.8:-Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. or Tor Reinforcement Raft In RCC M-300

Item No.9:-Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements) RCC M-30 Vertical Wall

Item No.10:-Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements) RCC M-30 Slab

Item No.11:-Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Steel

Item No.12:-Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction,etc.complete.(Bd-A-11/263) Filling

Item No.13:-Providing and fixing in position steel concrete (S.F.R.C.) frame and fibre covers reinforced of approved make including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer-in-charge (20 tonnes capacity). d) 90 x 60 cm size SFRC Cover

Item No.14:-Providing and applying water proofing treatment using acrylic polymer modified cementbasedwater proofing coatingwith fibre glass meshmixing at the rate of powder to liquid(2:1) byweight covering 9 to 10 SquareMetre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete

Item No.15:-Structural Design Charges = 2 % of Cost of RCC work Item No.3,4,5&7

Item No.1:-Subwork:- Sludge Drying Bed Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0.00 to 1.50 m

Item No.2:-Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd A-2/259) Lift 0.00 to 1.50 m

Item No.3:-Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete.(Bd-A-12/264) Soiling

Item No.4:-Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150

Item No.5:-Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. or Tor Reinforcement Raft In RCC M-300

Item No.6:-Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Steel

Item No.7:-Providing second classBurnt Brickmasonrywith conventional / I.S. type bricks in cement mortar 1:4 including scaffolding, racking out joints and watering etc. in pillar of rectangular shapes as shown in the drawings or as directed complete.Brick wall

Item No.8:-Providing internal cement plaster 12mmthick in single coat in cement mortar 1:4 with out neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Internal Plastering

Item No.9:-Providings and faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using water proofing compound at 1 Kilogram percement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. External Plastering

Item No.10:-Providing and applyingwhite-wash in two coats onold / newplastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface bybrushing and brooming down etc. complete. White Wash

Item No.11:-Providing and applying colour- wash of approved colour and shade in one coat to new surface including scaffolding, brushing and brooming down (excluding base coats of white wash) etc. complete Colour Wash

Item No.12:-Providing stuctural steel work in single stanchions composed of RSJ, channel, etc, with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, etc. as per detailed design and drawing or as directed by Engineer-in-charge including cutting, fabrication, hoisting, erecting, fixing in position, making riveted/bolted / welded connections and one coats of anticorrosive paint and over it two coats of oil painting, etc. complete. Structural Steel

Item No.13:-Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofingwithoutwindtiles including fastening with galvanised iron screws and bolts, lead and GI Sheet

Item No.14:-Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete.(Bd-A-11/263) Filling

Item No.15:-Structural Design 2% of RCC cost

Item No.1:-Subwork :- Compound Wall Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0.00 to 1.50 m

Item No.2:-Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd A-2/259) Lift 0.00 to 1.50 m

Item No.3:-Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150

Item No.4:-Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. or Tor Reinforcement Raft In RCC M-300

Item No.5:-Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements) RCC M-30 Beam

Item No.6:-Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements) RCC M-30 Column

Item No.7:-Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements) RCC M-30 Lintel & Coping

Item No.8:-Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Steel

Item No.9:-Providing second class Burnt Brick masonry with conventional / I.S. typebricks in cement mortar 1:4 including scaffolding, racking out joints and watering etc. in pillar of rectangular shapes as shown in the drawings or as directed complete Brickwall

Item No.10:-Providing sand faced plaster externally in cement motar using approved screened sand, in all positions including base coat of 15 mm. thick in cement mortar 1:4 using waterproofing compound at 1 Kg. per cement bag, curing the same for not less than 2 days and keeping the surface of the base coat rough to recive the sand faced tretment 6 to 8 mm. thick in cement mortar 1:4 finishing the surface by taking out grains and curing for foureen days scaffolding etc. complete. Plaster - External

Item No.11:-Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. chainlink fencing

Item No.12:-Providing and fixing mild steel grill work for windows/ ventilators of 20 Kg/Sqm. as per drawings including necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting, etc. complete. (Bd-U-1/537) Enterance Gate

Item No.13:-Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction,etc.complete.(Bd-A-11/263) Filling

Item No.14:-Structural Design 2% of RCC cost

Item No.1:-Subwork :- Control Panel Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift of 0 to 1.5 M

Item No.2:-Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-11/263) Lift of 0 to 1.5 M

Item No.3:-Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150

Item No.4:-Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rateof 5 litresof emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper

Item No.5:-Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. or Tor Reinforcement RCC Footing M-200

Item No.6:-Providing and casting in situ C. C. of trap / granite / quartzite/ gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C. M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever nesessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) RCC beam & lintel M-200

Item No.7:-Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted ) RCC Column M-200

Item No.8:-Providing and casting in situ C. C. of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and desingns or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted .) Slab M-200

Item No.9:-Providing and casting in situ C. C. of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use fo L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted .) Excluding M S or Tor reinforcement. Chajja M-200

Item No.10:-Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete.(including cost of binding wire) Tor Steel

Item No.11:-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of innerwalls/ in plinth external walls including bailing out water manually, striking joint sonun exposed faces,raking out joints on exposed faces and watering etc. Complete.

Item No.12:-Providing second class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar of following proportion superstructure including striking out & racking out joint watering and scafolding etc complete.

Item No.13:-Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete

Item No.14:-Providing sand faced plaster externally in cement motar using approved screened sand, in all positions including base coat of 15 mm. thick in cement mortar 1:4 using waterproofing compound at 1 Kg. per cement bag, curing the same for not less than 2 days and keeping the surface of the base coat rough to recive the sand faced tretment 6 to 8 mm. thick in cement mortar 1:4 finishing the surface by taking out grains and curing for foureen days scaffolding etc. complete.

Item No.15:-Providing and applyingwhite-wash in two coats onold / newplastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface bybrushing and brooming down etc. complete.

Item No.16:-Providing and applying colour-wash of approved colour and shade in one coat to new surface including scaffolding, brushing and brooming down (excluding base coats of white wash) etc.complete.

Item No.17:-Providing and laying matt finish ceramic tiles of having size 30cmx30cm confirming to I.S. 15622/2006 (group DII-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.

Item No.18:-Bamboo wood paneling or paneling and glazing in paneled and glazed shutters for doors of 25 to 40mm thick. Providing & fixing in position Phenol bonded Bamboowood paneling of 10mmthick, in 25 to 40mm thick paneled or paneled and glazed shutters for doors,windows,clere storey windows in approved colous, texture & finishi. The bamboo wood planks shall have minimum density of 1000 Kilogram/cum & minimum Hardness 1000 Kilogramf. The panels shall have profiled in terlocking system locked in place with bamboop ins, all complete as per direction of theEntgineer inchargeand (Area of opening for panel inserts excluding portion inside grooves or rebates)

Item No.19:- Providing and fixing steel windowof various sizes as per detailed drawingwit houthot dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars 12 mm square at 10 cm c/c.)

Item No.20:-Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 Kilogram/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick 95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the

Item No.21:-Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

Item No.22:-Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters

Item No.23:-Providing and fixing Orissa type white glazed earthen ware water closet pan of size 260mm x 440mm x 580mm with approved make Slim wall hung cistern with installation kit including S or P trap with cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc.complete.

Item No.24:-Providing and fixing white glazed earthenware Wash Hand Basin of 63cm x 45cm sizeincluding Bib cock stop tap brass heavy15mm, brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap upto the outside face of the wall.

Item No.25:-Supplying & erecting decorative pre-wired box type fitting/batten suitable for 4 feet, T8 LED tube light (excluding tube light).

Item No.26:-Supplying and erecting regular/ standard model ceiling fan of 1400 mm. Sweep complete erected in position as per specification no. FG-FN/CF

Item No.27:-Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Item No.28:-Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no EA-EP

Item No.29:-Providing and fixing on walls / ceiling / floors, 25 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.01 Kilogram /meter with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete

Item No.30:-Providing and fixing on walls / ceiling / floors, 40 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 4.49 Kilogram/meter with necessary fittings and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessaryand conveyingand stacking the same in PWD chowky or as directed etc.

Item No.31:-Structural Design 2% of RCC cost

Item No.4:-Subwork :- Filter Media For SDB Stone Aggregate 10mm

Item No.5:-Stone Aggregate 20mm

Item No.6:-Stone Aggregate 40mm

Item No.7:-Transportation as per STATEMENT VI Including loading, unloading and stacking Aggregate 40 mm & above (25 Km)

Item No.1:-Subwork :- Allied Work Supplying and erecting LED street light fitting suitable above Each 26W to 30W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG- ODF/FLS2

Item No.2:-Supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm dia with 4.5x3.65x3.25 mm thickness (4.5+1.75+1.75 m) length respectively and total 8.0 m long with pole cap, base plate in provided foundation. (weight 101 kg) as per specification no. OH-PL/STP

Item No.4:-Providing and fixing in position M.S. ladder 0.50 M wide consisting of 75 x 10 mm M.S. flats as stringers and 16 mm dia M.S. bars in double rows as steps placed at 25 cm c/c including cost of material and labour involved welding,anchoring and applying 3 coats of anticorrosive paint, etc. complete asdirected by Engineer-in-charge

Item No.5:-Painting letters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. complete

Item No.6:-Material Testing such as Cement, Sand, Aggregate, steel, brick, paving block etc.

Item No.7:-Topographic Survey of land available at site for construction of FSTP As per Quatation

Item No.8:-Carryout Ficals Sample test As per Quatation

Item No.9:-Providing detailed geological reports of proposed site by maintaining geotechnical investigation of structure stratification collecting soil, rock and ground water samples for laboratory tests to arrive the foundation design parameters. Rock properties such as type of rock, jointing fractures,etc.complete with suggestion about the site foundation and remedies.

Item No.10:-Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance asdirected by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A-9/261) (4 dyas x 4 hr x 7.5 hp pump)

Item No.11:-Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80MM thick in M-40 grade of approved size and shape for City streets, small /medium market roads,low volume roads, utility cuts on arterial roads etc. as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of VSI crushed sand of 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete.

Item No.12:-Technology Provider Charges, Provide has to be submit process calculation with Hydraulic design and Drawings as per the Availability of land and FSTP capacity As per Market rate

Item No.1:-Subwork :- Garden Estimate Site Cleaning and Preparation

Item No.2:-Making for Tree Pits

Item No.3:-Digging Pits (1 m3 for big trees)

Item No.4:-Soil Mising (topsoil + Compost)

Item No.5:-Soil Mising (topsoil + Compost)

Item No.6:-Planting Labour Charges

Item No.7:-Initial Watering Setup (Basic tools, pipe

Item No.8:-Maintenance (watering + weeding, 3 months)

Item No.9:-Tree Gaurds (Big trees)

Item No.10:-Drip Irrigation (basic)

Item No.1:-Subwork :- E&M Work Manual Screen- size 1 m length x 0.5 m width of SS 304 MOC and Manual hand rake for cleaning screen of SS handle 1 m in length and cleaning area of 6 Nos. 10 mm SS rod of total length 200 mm straight and 50 mm of 90 degree bend. As per Quotation

Item No.2:-Sewage Pump Sewage Pumps-Supplying Non clog Submersible Pump suitable for sewage/ Liquid waste application with standard MOC and given duty points as below Head upto 10 Mtrs MDSP Pump (1W +1S)

Item No.3:-ZA Tank Feed Pump (1W +1S)

Item No.4:-Filter Feed Pump (1W +1S)

Item No.5:-Treated Water Pump (1W +0S)

Item No.6:-Multi Disc Screw Press 1.25 Cu.m/Hr inlet Flow including automatic dosing system with Automatic poly dosing system As per Quotation

Item No.7:-Transportation & Erection charges = 15% cost of Multi Disc Screw Press Machinery

Item No.8:-Designing,Supplying, Installing, commissioning & testing of Power Analyser interfacing to PLC Panel with modbus communicatuionport, as per IEC 62053 and in the prescribed format including mounting arrangement. Power Analyser

Item No.9:-Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil and over load element with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser. > 7.5 HP & Up to 12.5 HP

Item No.10:-Supply, install and commission Electromagnetic Flow Meter (EMF) for size 63 mm 2.50 inch Flowmeter As per Quotation

Item No.11:-Designing, Supplying, Installing, commissioning & testing of Ultrasonic level transmitter CE marked with following technical parameters Interfacing with PLC panel including mounting arrangement

Item No.12:-3 core PVC insulated, PVC sheathed copper conductor flat submersible cable Supplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed. 3 core 16 sq mm

Item No.13:-Aluminium conductor 4 Core, XLPE / PVC insulated & armoured cable Supplying and erecting, XLPE/ PVC insulated, armouredcable 1100V grade with ISI mark Four core,solid/stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sqmm, complete erected on wall /on pole with 25 X 3 mm M.S. clamps or in provided trench in an approved manner. 4 Core 6 sq mm

Item No.14:-Copper conductor PVC insulated, Un-armoured control cable Supplying and erecting Un-armoured control cablewith ISI mark stranded / solid copper conductor 1.1 kV grade completeerectedonwall /panel or in provided trench in an approved manner. 4 core 2.5 sq mm

Item No.15:-Supplying, installing, testing and commissioning of 15 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 45 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card/chip for 5 years including net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG

Item No.16:-Pressure Sand Filter and Activated Carbon Filter of FRP / MSEP vessel with suitable thickness to withstand a water pressure including MPV or 5 Valve system and PVC / UPVC / MSEP interconnecting and underdrain piping including fittings, with standard filter media layer. Suitable openings to be provided to ease addition and removal the media. Dia 18 Inch x 65 Inch minimum height As per Quotation

Item No.17:-NaOCl Chlorinator Pump Diaphragm Type / peristaltic type / Solenoid / Max Flow Rate Upto 10LPH Power Source Electric - Phase Single Material PP / PTFE(Teflon) / Voltage 230 Volt / Frequency 50Hz / Mixing Tank of 50 Ltrs capacity- 1 No / Dosing Pump - 2 Nos As per Quotation

Item No.18:-Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipessuitable for potable water with solvent cementjoints including cost of couplers, as per ISspecification no. 4985 / 1988 excluding GSTlevied by GOI and GOM in all respect, includingtransportation, freight charges, inspectioncharges, loading, unloading, conveyance to thedepartmental stores and stacking the same inclosed shed duly protected from sun rays andrains including cost of jointing material i.e.solvent cement, etc. complete (selffit type to bejointed with cement solvent). Working Pressure 8 Kg/cm2 63 mm

Item No.19:-75 mm

Item No.20:-90 mm

Item No.21:-Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOt & GOM in all respect etc. complete 80 mm Dia

Item No.22:-Providing and supplying ISl mark CI D/F reflux valves (non-return valves ) of following dia including all taxes (Central and Local), railway freight, inspection charges unloding from railway wagon, loading into truck, transportation upto departmental stroes/ site, unloading, stacking etc. complete. Reflux valves as per I.S.5312 Part I (1984) 80 mm Dia

Item No.23:-Lowering, laying, jointing in position following CI/DF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete ( Rates for all class of valves ) 80 mm Dia

Item No.24:-Giving satisfactory hydraulic testing of following C.I. D/F Reflex valves, Butterfly valves and Sluice valves. 80 mm Dia

Item No.25:-Bio Media Supplying of Specially designed Filter media including HDPE bags, Lightweight coco husk size (2-16 mm) and Bio media including mixture of Vermicomposting, cocopeat with special worms per designed quantity As per Quotation

Item No.1:-Subwork :- Road Construction Excavation for roadway in earth, soil of all sorts, sand, gravelor soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.

Item No.2:-Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20 cm. to 30cm. thickness breaking clods,dressing to there quired lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97%of standard proctor density etc. complete ( Material obtained from Other sources)

Item No.3:-Providing, laying, spreading and compacting stone aggregates of specificsizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate,watering and compacting with Vibratory roller. to the required density. By Mechanical Means-Grading I (Using Screening Type A (13.2) mm Aggregate) WBM

Item No.4:-Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate (naturals and/ VSI grade finely washed crushed sand) conforming to IS383, using fineand coarse aggregates combined gradation as perTable 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant /non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver, compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound/ by providing cement vata in cement Mortar 1:8 @ 0.6mX0.6 m centre to centre, admeasuring 80mm at bottom and 40 mm at top with depth of 75mm and maintaining the same through out curing period by any other method approved by Engineer-in-charge. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batch mix plant (Pan mixer) etc. complete.

Item No.5:-Picking the road surface including sectioning etc. complete (WBM surface.)

Item No.:-Operation & Maintenance Charge for 1 Year

Item No.:-MSEB Charges

Please Enable Macros to View BoQ information