REPAIR AND POLISHING TO TABLE DINING BED PLY TOP CHAIRS AND OTHER MISC WOODEN FURNITURE ITEMS AT AF JORHAT AND REPAIR TO WOODEN AND STEEL FURNITURE ITEMS INCLUDING VARNISHING AND PAINTING ETC AT ALGs MECHUKA TUTING AND VIJOYNAGAR UNDER GE AF JORHAT.

Amount

Removing/Taking out carefully following old unserviceable worn out/components parts of the TABLE DINING 04 PERS (FD/MAP-II/03) and replacement with new materials/ components of same size made to shape duly finished to receive polish complete all as specified, directed and shown on drawing.

Leg made out of 1st class Hard wood complete all as specified and directed.

Table top 1200 X 900 X 18 mm thick prelaminated particle board with around 4 mm thick 1st class hardwood complete all as specified and directed.

Side Rail (long) of 1st class Hard wood as per sepcification shown on drawing.

Side Rail (short) of 1st class Hard wood as per sepcification shown on drawing.

Removing/Taking out carefully following old unserviceable worn out /components parts of TABLE DINING 06 PERSONS (FD-273) and replacement with new materials / components, made to shape finished to receive polish all as specified, directed and shown on drawing.

Leg made out of 1st class Hard wood complete all as specified and directed.

Table Top 1500x900x18 mm thick prelaminated particle board with around 4 mm thick 1st class Hard Wood edging all as specified.

Side Rail (long) of 1st Class Hard Wood as per specification shown on drawing.

Side Rail (short) of 1st Class Hard Wood as per specification shown on drawing.

Removing / Taking out carefully following old unserviceable worn out/components parts of BED PLY TOP (FD-246) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing.

4 mm thick ply wood of head board teak face veneered (one side) all as specified shown on drawing.

4 mm thick ply wood of foot board teak face veneered (one side) all as specified shown on drawing.

Long Rail made out of 1st class Hard wood made to shape all as specified shown on drawing.

Short Rail made out of 1st class Hard wood made to shape all as specified shown on drawing.

Leg made out of 1st class Hard wood made to shape all as specified shown on drawing.

12 mm thick ply wood of size 1890 mm x 900 mm bed top BWR commercial all as specified shown on drawing.

Removing/Taking out carefully following old unserviceable worn out / components parts of TABLE 900 X 600 X 760 MM WITH DRAWER (FD-41 M) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing.

Table top 900 x 600 x18mm thick prelaminated particle board with around 4 mm thick 1st class hardwood edging.

Long Rail made out of 1st class Hard wood made to shape all as specified shown on drawing.

Short Rail made out of 1st class Hard wood made to shape all as specified shown on drawing.

Leg made out of 1st class Hard wood made to shape all as specified shown on drawing.

Stiffner 25 x 40 mm made out of 1st class Hard wood made to shape all as specified shown on drawing.

Drawer made out of 1st class Hard wood made to shape all as specified shown on drawing.

Removing / Taking out carefully following old unserviceable worn out / components parts of TABLE DINING 08 PERSONS (FD-273) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing.

Leg made out of 1st class Hard wood made to shape all as specified shown on drawing.

Table Top 1800x900x18 mm thick prelaminated particle board with around 4 mm thick 1st class Hard Wood edging complete all as specified and directed.

Side Rail (long) of 1st Class Hard Wood made to shape all as specified shown on drawing.

Side Rail (short) of 1st Class Hard Wood made to shape all as specified shown on drawing.

Removing / Taking out carefully following old unserviceable worn out components parts of CHAIR DINING (FD-279) and replacement with new materials / components, made to shape finished to receive polish all as specified, directed and shown on drawing.

Front Leg of 1st class Hard wood made to shape all as specified shown on drawing.

Rear Leg of 1st class Hard wood made to shape all as specified shown on drawing.

Stiffner of 1st class Hard wood made to shape all as specified shown on drawing.

Front/Side Rail with necessary holes for canning of 1st class Hard wood made to shape all as specified shown on drawing.

Removing / Taking out carefully following old unserviceable worn out components parts of CHAIR WRITING (FD-280) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing

Front Leg of 1st class Hard wood made to shape all as specified shown on drawing.

Rear Leg of 1st class Hard wood made to shape all as specified shown on drawing.

Stiffner of 1st class Hard wood made to shape all as specified shown on drawing.

Front/side Rail with necessary holes for canning of 1st class Hard wood made to shape all as specified shown on drawing.

Arm rest of 1st Class Hard wood made to shape all as specified shown on drawing.

Removing / Taking out carefully following old unserviceable worn out components parts of CHAIR EASY (FD-229) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing

Front Leg of 1st class Hard wood made to shape all as specified shown on drawing.

Rear Leg of 1st class Hard wood made to shape all as specified shown on drawing.

Front/Side Rail with necessary holes for canning of 1st class Hard wood made to shape all as specified shown on drawing.

Arm rest of 1st Class Hard wood made to shape all as specified shown on drawing.

Removing / Taking out carefully following old unserviceable worn out components parts of CHAIR WOODEN BOTTOM (FD-285) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing.

Front Leg of 1st class Hard wood made to shape all as specified shown on drawing.

Rear Leg of 1st class Hard wood made to shape all as specified shown on drawing.

Stiffner of 1st class Hard wood made to shape all as specified shown on drawing.

Front/side Rail with necessary holes for canning of 1st class Hard wood made to shape all as specified shown on drawing.

Seat 6 mm thick plywood commercial complete all as specified and directed.

SOFA SET 4/5 SEATER FD-281 Taking out old unserviceable foam with cover from sofa set 4/5 seater and replacement with new cushion in Sofa of size 560 x 534 x 100 mm, 40 mm density and covered with new tepastry cloth superior quality, approved by GE complete all as specified as shown in drawing.

Removing / Taking out carefully following old unserviceable worn out components parts of CHAIR DINING JCO's/OR's (FD/MAP-II/05) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing.

Removing the old PVC seat and S&F with new seat of chair dining MAP/ JCO,s/ OR,s as per existing shape and size all as specified and directed.

Front Leg of 1st class Hard wood made to shape all as specified shown on drawing.

Rear Leg of 1st class Hard wood made to shape all as specified shown on drawing.

Stiffner of 1st class Hard wood made to shape all as specified shown on drawing.

Front/Side Rail with necessary screws complete all as specified and directed.

Removing / Taking out carefully following old unserviceable worn out components parts of CHAIR DINING OFFRS (FD/MAP-II/04)and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing.

Removing wornout tapestry cloth and cushion from chair dining offrs and S&F cushion and tapestry cloth and as per existing shape and size all as specified and shown in drg.

Front Leg of 1st class Hard Wood made to shape all as specified shown on drawing.

Rear Leg of 1st class Hard wood made to shape all as specified shown on drawing.

Stiffner of 1st class Hard Wood made to shape all as specified shown on drawing.

Front/Side Rail of 1st class Hard Wood made to shape all as specified shown on drawing.

Removing / Taking out carefully following old unserviceable worn out components parts of TABLE CENTRE (FD 274) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing.

Table top 900 x 450 x 18 mm thick prelaminated particle board with around 4 mm thick 1st class hardwood edging complete all as specified and directed.

Leg of 1st class Hard Wood made to shape all as specified shown on drawing.

Side rail (long) of 1st class Hard Wood made to shape all as specified shown on drawing.

Side rail (short) of 1st class Hard Wood made to shape all as specified shown on drawing.

Removing / Taking out carefully following old unserviceable worn out / components parts of TABLE WRITING (FD-275) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing.

Leg made out of 1st Class Hard Wood made to shape all as specified shown on drawing.

Stiffner made out of 1st Class Hard Wood made to shape all as specified shown on drawing.

Door 18 mm thick plywood BWR grade with 1 mm thick laminated sheet fixed with adhesive and around 4 mm thick 1st class Hard Wood edging all as specified as per drawing.

Drawer of 1st class Hard Wood all as specified shown on drawing.

Table top 1145 x 600 x 18 mm thick prelaminated particle board with 4 mm thick around 1st Class HardWood edging all as specified.

Side rail (long )of 1st class Hard Wood made to shape all as specified shown on drawing.

Side rail (short) of 1st class Hard Wood made to shape all as specified shown on drawing.

Removing / Taking out carefully following old unserviceable worn out components parts of SIDE BOARD FD 26 (M) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing

Top shall be size of 1220 x 445 x 18 mm thick plywood with 1 mm thick laminated sheet fixed with adhesive and around 4 mm thick 1st class Hard Wood edging all as specified.

Door of size 585 x 835 x 18 mm thick plywood BWR grade with 1 mm thick laminated sheet fixed with adhesive and around 4 mm thick 1st class Hard Wood edging all as specified.

Side 18 mm thick plywood BWR grade with 1 mm thick laminated sheet fixed with adhesive and as specified.

Back 6 mm thick plywood BWR of Size 1220 x 625 mm complete all as specified and directed.

Drawer all as specified and shown on drawing.

Removing / Taking out carefully following old unserviceable worn out components parts of PEG TABLE (FD 277) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing

Table Top 450 X 300 x 18 mm thick prelaminated particle board with around 4 mm thick 1st class Hard Wood edging complete all as specified and shown on drawing.

Leg of 1st class Hard Wood made to shape all as specified shown on drawing.

Side rail (long) of 1st class Hard Wood made to shape all as specified shown on drawing.

Side rail (short) of 1st class Hard wood Hard Wood made to shape all as specified shown on drawing.

Removing / Taking out carefully following old unserviceable worn out / components parts of TEAPOY( FD 278) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing.

Table Top 600 X 450 x 18 mm thick prelaminated particle board with around 4 mm thick 1st class Hard Wood edging complete all as specified and shown on drawing.

Leg of 1st class Hard Wood made to shape all as specified shown on drawing.

Side rail (long) of 1st class Hard Wood made to shape all as specified shown on drawing.

Side rail (short) of 1st class Hard Wood made to shape all as specified shown on drawing.

Removing unsericeable cane from various types of chairs and re-canning (Godrej pattern) the same with new Plastic Cane 2mm wide Oval Type in white colour and border with 4 mm wide, complete all as specified/shown on drawing

Painting of name plate of size 15" x 12" with synthetic enamel paint, back ground in black paint and capital letter in white paint, font size 40mm height of letter as existing/suitable for name plate and as directed of GE (AF), OMQ and other offices under 10 Wing (AF)

S & F Fancy type steel knobs suitable for drawers of wooden furnitures complete all as specified and directed.

S & F Steel handles suitable for drawers of Table Bed Side (MAP)/Table dressing ladies (MAP) complete all as specified and directed.

POLISHING. Removing of all old faded out polish by polish remover/scrapper or by caustic soda or by any other means without damaging surfaces of furniture as listed below, making the surface smooth and free from dust and applying high gloss french polish till glossy/shine finish is obtained all as specified and directed.

Bed plywood Top (FD-246)

Side Board (FD 26M)

Chair Dining (FD 228, FD279)

Chair Easy (FD 17M, FD 229)

Chair Writing. Drg No FD-280)

Chair W/B without arm. Drg No FD-285)

Peg Table ( FD 236, FD 277)

Stool Dressing (FD-282)

Teapoy (FD 278)

Table Centre ( FD 235, FD 274)

Table writing (FD 275)

Chair Dining MAP (FD/MAP-II/05)

Table 900 x 600 x 760 mm with drawer (FD/283)

Chair Dining long Back (FD/MAP-II/04)

Table Bed Side (FD 276)

Table Dining 06 Pers (FD-273)

Table Dining 04 Pers (FD/E6/MAP-II/03)

Sofa Set 04 Seater (FD-281)

Sofa Set 05 Seater (FD-281)

Table Dining 08 Pers (FD-273)

Chair Dining long back (SPL)

Hat stand with mirror (FD-233)

ALMIRAH LARGE STEEL - (FD-1031)

S&F LEG of Almirah large steel made out of 1mm thick mild steel sheet as shown on drawing and apply two coats of synthetic enamel paint over a coat of red oxide primer with spray painting compressor, including removing of unserviceable leg complete all as shown in drawing and directed.

All as per item 23.01 above but shelves of almirah large steel.

All as per item 23.01 above but door of almirah large steel.

S&F Locking Device including locking rods for Almirah large steel including removing of un serviceable locking device complete all as shown in drawing and directed.

S&F Handle 150 mm long,chromium plated for Almirah large steel including removing of un serviceable Handle complete as shown in drawing and directed.

S&F Lock universal type 6 lever made out of mild steel ,powder coated for Almirah large steel including removing of un serviceable lock complete as shown in drawing and directed.

ALMIRAH MEDIUM STEEL - (FD-1032)

S&F LEG of Almirah Medium steel made out of 1mm thick mild steel sheet as shown on drawing and applying two coats of synthetic enamel paint over a coat of red oxide primer with spray painting compressor, including removing of unserviceable leg complete all as shown in drawing and directed.

All as item No 24.01 ,But Shelves for Almirah medium steel

All as item No 24.01 ,But door for Almirah medium steel

S&F Locking Device including locking rods for Almirah medium steel including removing of un serviceable locking device complete all as shown in drawing and directed.

S&F Handle 150 mm long,chromium plated for Almirah medium steel including removing of un serviceable Handle complete as shown in drawing and directed.

S&F Lock universal type 6 lever made out of mild steel ,powder coated for Almirah medium steel including removing of un serviceable lock complete as shown in drawing and directed.

TABLE CLERKS STEEL - (FD-1004)

S & F drawer of size 310 x 144 x 410mm made out of 1 mm thick mild steel sheet with all the necessery cutting, moulding, make hole welding etc., and applying two coat of synthetic enamel paint over a coat of red oxide primer with spray painting compressor including removing unserveceable drawer, complete as shown in the drawing.

S & F lock 3 way, 6 lever for table clerk steel including removing unserviceable drawer lock, complete all as specified in the drawing.

S & F PVC recess handle including fixing with self tapping screw, including removing unserviceable handle, complete all as specified in the drawing.

S & F hard rubber shoe 25mm X 25mm including removing unserviceable rubber shoe complete all as specified in the drawing.

S & F in repair Top of table clerks steel 18mm thick pre-laminated particle board with 4 mm thick 1st class Hard wood edging all around, complete all as specified,shown on drawing and directed.

CHAIR CB STEEL WITH ARM : (FD-75M)

S & F Seat of chair CB steel with arm of size 460x420x25mm made out of 1st class hard wood ,all as shown in the drawing, including weaving plastic cane of 2mm wide boarder with 3mm wide, half round type white godrej pattern, fitting seat on frame with self tapping screw neatly. All the wooden exposed parts shall be french polish up to glossy finish or painted with synthetic enamel black paint complete all as specified,shown on drawing and directed.

All as item No 26.01 above but back 460x370x25mm for chair CB steel with arm.

S & F handle for chair CB steel with arm made out of 1st class hardwood and applying black paint obtaining glossy finish complete all as specified,shown on drawing and directed.

CHAIR VARANDAH : (FD-259)

Removing of old unservicable plastic cane from seat and back of chair Verandah and recanning of seat and back with 4mm wide half round plastic cane of best quility Godrej pattern complete all as specified and shown in drawing and directed.

S&F Leg of chair verandah made out of 20mm dia mild steel pipe with all nesessary workman ship like cutting, bending making hole and welding including removing of unserviceable leg and apply two coat of synthetic enamel paint with spray compressor complete all as specified and shown in drawing.

S&F hard plastics shoe in repair complete all as specified and shown in drawing.

GI Charpoy : (FD-220)

S&F GI Charpoy Long Rail of GI Pipe 32mm Bore (dia) Medium Grade duly Threaded Both Ends upto the required Length and fitted to frame of Charpoy including taking out unserviceable long rail from 3-way elbow by unscrewing complete all as specified and shown in drawing.

Cutting long rail (retrieved from Item No. 28.01 here-in-before) to make short rail and threading both ends upto the required length including straightening where required and fixing including taking out unserviceable short rail by unscrewing from three way elbow complete all as specified and shown in drawing.

Cutting short rail (retrieved from Item No. 28.01 here-in-before) to make legs and threading one ends including straightening where required and fixing including providing 2 Nos mild steel flat iron 20 x 3 mm clamps and providing mild steel flat iron or washer to bottom of mild steel clamps, welded to leg and treated with one coats of black paint over a coat of red oxide zinc chrome primer including taking out unserviceable leg by unscrewing from three way elbow complete all as specified and shown in drawing.

S&F GI ELBOW 3-WAY, ISI Marked suitable for GI Pipe 32mm Bore (dia) of GI CHARPOY including Taking out unserviceable GI ELBOW from the Frame complete all as specified and shown in drawing.

(v) S&F GI CHECK NUT, ISI Marked suitable for GI Pipe 32mm Bore (dia) of GI CHARPOY including Taking out unserviceable GI Elbow from the Frame complete all as specified and shown in drawing.

S&F Mild Steel Flat 50mmX6mm thick to charpoy GI Pipe 900 mm long with nut and washer, complete all as specified/as shown on Drawing.

S&F in repair ply wood of size 2000 mm x 900 mm x 12 mm for charpoy GI Pipe with 8 numbers of screw 65 mm with Nut and Washer complete all as specified and as shown on Drawing and as directed,

M&L for removing bends setting right broken/detached welds etc.Of steel furniture ,rejointing by welding not exc.100mm in length /Girth (Thickness of metal weld not Exc. 6mm) including applying one coat of synthetic enamel paint over a coat of red oxide primer on effected repaired/welded portion to match with existing ,complete all as specified and as directed.

PAINTING OF STEEL FURNITURE:- M & L preparing external and internal surface of following steel furniture items including de-rusting/scratching, paste applying putty, sanding, etc. and applying spray painting with two coats of synthetic enamel paint (1st quality) using spray guns, over a coat of red oxide primer to match existing colour or as required colour complete all as specified,shown on drawing and as directed.

Almirah Large steel (FD-1031)

Almirah Medium steel (FD-1032)

Rack Six tier Steel (FD-1038)

Chair CB steel with Arm (FD-95M)

Chair Varandah (FD-1106)

Chair steel with arm cushion, seat and back (FD-121M) Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.

M/S DHAR AND DHAR

M/S SANTOSHI TRADERS

M/S N M TRADERS

NIHAR ENTERPRISE

Bidder Name

NIHAR ENTERPRISE

M/S N M TRADERS

M/S GOSWAMI BROTHERS

M/S DHAR AND DHAR

M/S SANTOSHI TRADERS