PROVN OF ALUMINIUM PARTITION AND ALLIED WORK IRON GRILLS AT VARIOUS LOCATION INFRASTRUCTURE FOR MECHANICAL LAUNDRY AND ADDN ALTN TO BLDG NO P 50A AT 7 AFH KANPUR

Amount

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil completeall as specified and directed

Excavation in trenches n.exc 1.5m wide and n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n,.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed

M&L PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed.

M & L PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in DPC complete all as specified and directed.

M & L form work to sides of concrete flats of PCC/RCC bands as in footing, Colmn, Beam complete all as specified and directed

M & L mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns hooking ends and binding with and including mild steed wire, annealed not less than 0.90 mm dia or securing with clips complete all as specified and directed.

M & L mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders completeall as specified and directed.

M & L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) of rough finished surfaces complete all as specified and directed.

M & L RCC M-25 using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in sheves and the like all as specified and directed.

M & L RCC M-25 using 20 mm graded stone aggregate as in Foundation,incl raft, footing,fdn beams, plinth beam, bases for Colmun, etc basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L rendering 15 mm thick in cement (1:4) finished even and smooth without using extra cement on brick surface complete all as specified and directed.

M & L 10 mm thick cement plaster in CM 1:3 on ceiling surfaces finished even and smooth without extra cement on fair faces of brick or concrete surfaces complete all as specified and directed.

M&L preparing new plastered surfaces and applying two coats of Oil bound distemper over a coat of primer on Wall & Ceiling surfaces complete all as specified and directed.

M & L hard core of gauge n.exc 63 mm broken stone spread & levelled in layer n.exc 15 cm thick watered & rammed to a true surface complete all as specified and directed

M & L 100 mm thick Cement concrete type D- 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed.

M&L PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) 25mm thick as in floor finished fair and even for laying of leveled bed complete all as specified and directed

M & L coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and incl 15 mm thick screed bed or bedding layers in CM 1:6 complete all as specified and directed

M & L coloured Glazed ceramic tiles 300 x 450 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 10 mm thick rendring layers in CM 1:4.all as specified and as directed

M&L100 mm thick Cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) in footpath/ hard standing/pavings/plinth protections, finished even and smooth using extra cement incl spike rolling to making impression of expended metal, whilst the concrete is green complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25cm in soft/loose soil complete all as specified and directed.

Removal of excavated material n.exc 50m and deposited where directed at a level n.exc 1.5m above the starting point complete all as specified and directed

S & F factory made UPVC white colour sliding window three track area exceeding 2 sqm each made of extruded profiles with wall thickness of 2.3 mm (+- 0.2mm) window profile with hallow section with multi chamber. Frame 88 mm x 52 mm), sliding sash (42 mm x 67 mm ), sliding mesh sash (42 mm x 57 mm ) sliding interlock (one vertical length in each shutters) (45.5 mm x 28 mm ). Glazing bead (24.5 mm x 16 mm ) will be mitred cut and fushion welded at all corners, including railing of holes for fixing hardware and drainage of water etc making arrangement for fixing of Hardware, EPDM gasket 1.2 +-0.2 mm thick galvanised steel frame (30 mm x 18 mm) 02 Nos, sliding sash (30 mm x 18 mm) sliding mesh sash 26 mm x 10 mm) profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners. Hardware (Touch lock of zink alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apparture 1.40 mm and required accessories) Note :- The unit rate quoted by contractor exclues cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.

S & F 5.5 mm thick figured glass pin headed type and glazing with rubber bedding in square not exceeding 0.50 sqm in each pane complete all as specified and directed

M&L Mild steel TMT 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

M & L for Precast cement concrete 1:3:6, type C1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed.

M & L concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 9using 40 mm graded stone aggregate) of 100mm dia pipes complete all as specified and directed.

M & L Salt glazed stoneware drain pipes laid in trenches and jointed of 100mm dia pipes complete all as specified and directed.

S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F mortice lock brass 4 levers vertical type, size 100mm complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors, on walls complete all as specified and directed.

S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors, walls complete all as specified and directed.

S&F PVC (SWR) bends of any radius of 110mm dia completeall as specified and directed.

S&F PVC (SWR) bends of any radius of 75mm dia completeall as specified and directed.

S&F PVC (SWR) junction (single ‘T’) with / without access door for 110mm dia pipe complete all as specified and directed.

S&F PVC (SWR) junction (single ‘T’) with / without access door for 75mm dia pipe complete all as specified and directed.

Cutting into existing steel tubing for alterations or additions of 20mm dia bore of pipes complete all as specified and directed

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), inimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid or/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.all as specified and directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 600 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete, all as specified and directed.

M&L PCC (1:2:4) type B-2 nominal (using 40 mm graded stone aggregate) for fdn/ mass concrete complete all as specified and as directed .

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole completeall as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F mild steel work as in main and cross beam, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe – 410-O or Fe – 310-O complete all as specified and directed.

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. complete all as specified and directed

Excavation in post holes ( or similar holes) each not exc 0.5, cum getting out in hard/dense soil, returning , filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering and removing surplus soil to a distance not exc 50 metre and making good surface complete all as specified and directed

M&L for 100 mm PCC (1:4:8) type D2 (using 40 mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.

M & L for preparing of new surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed by Engr-in-Charge.

Providing & Fixing Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete. NOTE :- . vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size, with top and bottom rail of T-Iron 40x40x6mm, with 40mm dia steel pulleys, handles all as specified and directed.

M&L Aluminium partition made with aluminium anodised section 62.30 x 44.45 x 1.50 mm of Jindal,National,Hindlco fixed in wall including provision for receiving glass pane etc and fixing the same with aluminium anodised beading and rubber gasket including 5mm thick glass (black/tinted/plain) or PVC Sheet and all necessary fittings complete all as specified and directed.

M&L for aluminium Sliding doors, powder coated (of approved colour), with frame of section 100mm x 44mm x 1.50 mm thick and shutter with bottom rail of section 150mm x 44.5mm x 1.50 mm thick, middle rail of section 85mm x 44.5mm x 1.50 mm thick and top rail of section 80.4mm x 44.5mm x 1.50 mm thick and styles of section 80.4mm x 44.5mm x 1.50 mm thick with 5 mm thick glass (plain/ tinted/ with laminated film) or prelaminated board fixed in position with aluminium beading including necessary rubber gaskets and 2 Nos. aluminium push plate handle of aluminium section 150 mm wide and 1.50 mm thick including 150 mm aluminium tower bolt, brass mortice lock complete all as specified and directed

M&L for aluminium doors, powder coated (of approved colour), with frame of section 100mm x 44mm x 1.50 mm thick and shutter with bottom rail of section 150mm x 44.5mm x 1.50 mm thick, middle rail of section 85mm x 44.5mm x 1.50 mm thick and top rail of section 80.4mm x 44.5mm x 1.50 mm thick and styles of section 80.4mm x 44.5mm x 1.50 mm thick with 5 mm thick glass (plain/ tinted/ with laminated film) or prelaminated board fixed in position with aluminium beading including necessary rubber gaskets and 2 Nos. aluminium push plate handle of aluminium section 150 mm wide and 1.50 mm thick including 150 mm aluminium tower bolt, brass mortice lock complete all as specified and directed.

S&F in repair of GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed..

All as per item No 54 above but bore of pipe 20 mm complete all as specified and directed.

Cutting chases in brick walls for concealed water tubing and making good in CM 1:3 cutting n.exc 10 cm girth complete all as specified and directed.

Dismantling of cast iron soil pipes jointed in cement mortar up to and including 100 mm dia complete all as specified and directed.

S&F of cast iron soil waste and vent pipes, sand cast pipe 75 mm dia, in any length with or without ears with lead joints fixed in walls complete all as specified and directed.

All as per item No 58 above but 100 mm dia pipe complete all as specified and directed.

S&F in repairs CI bend(any radius) 75 mm dia , diminishing pieces or tapers with oval access door complete all as specified and directed..

All as per item NO 60 above but 100 mm dia complete all as specified and directed.

M & L for cast iron floor trap with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate, 75 mm dia outlet complete all as specified and directed.

S&F in Repairs Cast iron Nahni trap 75mm dia outlet with grating including jointing to waste pipe fixed in cement concrete type B-1 Type 1:2:4 diameter of out let pipe 100mm complete all as specified and directed.

S&F rotational moulded polythene water storage tank of capacity 750 ltrs (Cylindrical/vertical with closed top), white colour, triple layer construction, hoisted & fixed in position, including dismantling of old tank & removing to where directed complete all as specified and as directed.

M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in kerbs , copings , bed plates, bases of tank padding / tank staging concrete etc complete all as specified and directed.

S&F in bib taps ,cast copper alloy ,fancy type long shank ,chromium plated with capstan ,head screwed down ,high pressure ,screwed for iron pipe 15 mm bore and fixed complete all as specified and directed.

S&F in repair fancy type chromium plated central hole basin mixer w/o pop up for 15mm bore pipes complete all as specified and directed.

S&F 15 mm CP stop valves (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs CP 15 mm stop angle vavle cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs brass chromium plated grating of size 127 mm dia , all as specified and directed.

S&F in repair chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges all as specified and directed .

S&F chromium plated soap dish complete all as specified and directed.

S&F wall mixture 15 mm dia with provision for over head shower with 115 mm long bend pipe on upper sizw connecting legs & wall flange, fixed with 15 mm GI pipe complete all as specified and directed. Make : Cat No FLR-CHR-5273UPR of JAquar or equivalent make as mention in Appx of PS.

S&F in Repairs Gun metal globe or gate valves 20 mm dia with iron wheel head screwed both ends, for iron pipe and fixed complete all as specified and directed.

S&F of ball brass valves 20 mm dia high pressure with polythene float and flynut screwed for iron pipe or brass ferrule complete all as specified and directed..

S&F in Repairs vitreous china white squatting pan orrissa pattern size 630x450mm with integral foot rest including provision of lime concrete bedding fixed complete all as specified and directed.

S&F in Repairs PVC low level Flushing cistern 10 Ltr capacity of approved make and colour complete all as specified and directed.

S&F in Repairs in repair Wash hand basin white vitreous china 550 x 400mm including necessary CP Waste fitting, waste pipe complete all as specified and directed.

S&F corner glass shelf 300mm (with brass brackets) of Cat No BEA-44 of make- Prayag or equivalent make as mention in Appx of PS.

S&F in Repairs PVC connection 15 mm dia 600 mm long with PTMT nuts at both ends fixed complete all as specified and directed.

S&F in repair kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall as with fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm including waste coupling & waste pipe complete all as specified and directed.

S&F in repairs stainless steel kitchen rack standard size (24x36x10) inch complete all as specified and directed.

Demolition of cement concrete /lime concrete of any description and in any position not otherwise specifically provided for , such as sunken floor filling etc, complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed.

M & L for vitrified light shade tiles 10 mm thick (square/rectangular) polished, area of each tiles n exc 0.36 Sqm in floors etc. set and and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floor aprons, slabs and shelves etc laid in bedded in cement mortar

M&L of granite of (type and colour as approved) of 20mm thick rubbed and polished, edges rounded fully moulded in cooking plat forms, shelves and like in CM 1:4 including pointing in white cement 1:2 using marble dust and with admixture of pigment to match the shade of granite 20mm thick over and including screed bed 15mm thick in CM 1:6 all as specified and directed

Dismantling of asbestos cement/PVC SWR pipes of any size or description with cement joints fixed to wall complete all as directed.

S&F PVC (SWR) pipes 110 mm single socketed in any length , with rubber ring joints fixed to walls including necessary iron clamps fixed in wall,roof complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm single socketed in any length , with rubber ring joints fixed to walls including necessary iron clamps fixed in wall,roof complete all as specified and directed.

Demolition of brick/stone masonry built in cement mortar complete all as directed.

M&L brick work with Sub Class `B' bricks , straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and directed.

Taking down cement plaster or brick or stone walls/ concrete surfaces including taking out joints, hacking for key, scrubbing down on with water etc complete all as specified and directed..

M&L for 15mm thick rendering in CM 1:4 on fair faces of concrete surfaces finished even and smooth w/o using extra cement on walls all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick or stone masonry in ceiling in CM (1:3) finish even and smooth w/o using extra cement on ceiling complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:6 on fair faces of brick walls and surface finished even and smooth w/o using extra cement on wall all as specified and directed

M&L for preparation of new undecorated surfaces of walls and applying two coat of Oil Bound Distemper over a coat of primer and 1 mm thick wall care putty, complete all as specified and directed.

M&L for applying two or more coats of 100 % premium acrylic emuilsion paint having VOC less than 50 gm/ litre and UV resistance dirt resistance as per IS15489: 2004, Alkali & Fungal resiatance,dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed.

M&L for applying two or more coats of 100 % premium acrylic emuilsion paint having VOC less than 50 gm/ litre and UV resistance dirt resistance as per IS15489: 2004, Alkali & Fungal resiatance,dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for preparation surface of ceiling and applying three coats of white wash, all as specified and directed.

Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as directed.

Taking down chowkhats or frames ( without taking off shutters from the frame exc 1.5sqm but n. exc 4 sqm each all as specified and directed

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC Sheet & edges will be painted to match with printed sheet supplying & fixing in opening as per specification & drawing.

M&L for Factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4, or 6 raised panel design with 5mm thick Moulded prelam PVC sheet on the front face & 5mm plain colour PVC prelam sheet on back face and fixed in the frame at site as per specification & drawing . (Note : The unit rate quoted by contractor includes 3 nos 75mm SS butt hinge, 2Nos 125mm handle, 100mm tower bolt, 1Nos 250mm sliding bolt, all other connected accessories) complete all as specified and directed.

M&L for Second class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and as directed.

M & L for 35 mm thick factory made Second class hardwood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc with sash bar any number fitted with cut and mitered beads for securing glass gauze etc , sizes of members of shutters as specified in SSR Part I section 8, Section 8.24(a) and fitted to chowkats complete all as specified and as directed.

S & F 40 mm thick factory made second class hard wood plain, framed, panelled shutters (any number of panels), with 12mm thick panels of veneered particle board or plywood complete all as specified and directed.

S&F MS butt hinges , medium weight cold rolled of size 100 mm thick complete all as specified and directed.

S&F aluminium anodised sliding bolt 300 mm long with hasp, staple (bolt type) and fixing of sheet, cast or extruded sections and fixing bolts complete all as specified and directed.

S&F in aluminium anodised barrel tower bolt 200 mm long extruded section and fixed complete all as specified and directed.

S&F aluminium alloy anodised handle of size 150 mm fabricated type complete all as specified and directed.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staples complete all as specified and directed.

S&F in repair 250mm size mild steel door springs, all as specified and directed.

S & F 18 mm thick 100% Lead free both side plain laminated WPC sheet of any colour with using sunmica of choice colour on both side for kitchen cabinet shutters, shelves and shutters for cup board or similar use and required bracket etc. The panels shall be fabricated using adhesive and screws where ever required. All edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bent finish as per manufacterer’s instruction and make approved by GE complete all as specified and directed. Note : All fittings and fixtures such as Soft closer, handles, piano hinges,lock etc for shutter should be included rated quoated by the contractor.

S&F 19 mm thick prlaminated particle board, interior grade with both side decorative choice lamination fixed with screw to timber frame work as in shelves , Cup board shutter etc with all around lipping complete all as specified.

S&F 30 mm wide continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (using 20mm graded agg) for hold fasts finished to match with the surrounding surfaces including necessary form work complete all as specified and as directed.

M&L for Mild steel small articles such as flat iron 25x3mm thick for hold fasts etc conforming to Fe 410-0, or 310-0, all as specified and as directed.

M&L for preparation of new wooden surfaces of any description exec 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Dismantling mild steel windows/ventilators/grill of any description complete all as directed.

S & F steel Window/Ventilator factory made, made out of MS hollow section 79mmx39mmx1.6mm thick frame with double shutters (Glazed & wire gauge shutters) made out of 'box type' section using flush butt welding & tenon riveting all as per IS 1038 / 83, dobby hinges shall be provided to both shutters. Locking arrangements as per sample approved by GE, provided with knob, 10mm MS square bars in grills, 'box type' section handle 100mm sized & 150mm long hook & eye welded to frame & shutter, four nos lugs welded to frame including necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fasts and making good in PCC 1:2:4 type B-1 including preparation of surfaces & applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer

M & L Plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping kerbs benching all as specified and directed.

S&F for framed doors or gates of mild steel angles or other sections with gusset plates, rails, braces,perlin,rafter etc., complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing of Fe-410W(Gde-E-250) quality 'A', complete all as specified and directed.

S&F 2.00 mm thick plain, galvanised mild steel sheeting, in steel gates, ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

M & L for complete removal of existing treatment of wall and preparation of old decorated surfaces and applying two coats of oil emulsion distemper over a coat of primer over and including 1 mm thick wall care putty complete all as specified and directed.

M & L preparation of old treated surfaces of walls /ceiling etc and treating with two coat of white wash all as specified and directed.

M & L Preparation of old wooden surfaces of any description and applying two coat of synthetic enamel paint complete all as specified and directed.

M & L Preparation of old steel surfaces of windows and ventilators by oiling/greasing in hinges and applying two coat of synthetic enamel paint complete all as specified and directed.

Taking down carefully/aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem sheet switches, ceiling rose, pendent holder sockets, regulator except concealed conduit and sunken boxes etc and making good distrubed surfaces of wall and floors etc to match with the existing, complete all as specified and directed by Engineer-in-charge.

M & L for point wiring complete modular type with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through and including concealed PVC rigid conduit 20mm dia( heavy duty ) with all fittings and all accessories i.e pipe bend pipe hook, elbow,junction box, pressed steel powder coated sunken boxe of suitable for mounting modular switches and sockets , fan regulator, for light/fan point /exhaust fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly , and provision of suitable module plate ,plate cover etc including cutting chases in wall and making good distrubed surface of wall/ceiling/floors etc by using CM (1:3 ) to matching with existing surface complete all as specified and as directed by Engineer-in-charge. Note:- Whereever the wall surfaces disturbed due to cutting of wall for insertion of conduit that wall to be finished with cement mortar and putties as per matching of existing colour and cement work included in the quoted rate.

All as per item No 132 here in before but for socket outlet 5 pin 5/6 Amp on same board, complete all as specified and directed by Engineer-in-charge.

All as per item No 132 here in before but for socket outlet 5 pin 5/6 Amp on independent board but not below the switch board, complete all as specified and directed by Engineer-in-charge.

All as per item No 132 here in before but for socket outlet 6 pin, 15/16 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth, complete all as specified and directed by Engineer-in-charge.

All As per item No 132 in before but for bell/buzzer point, complete all as specified and directed by Engineer-in-charge.

M & L modular Switch 1 way 6A ,1 module 250 volts AC one way ISI, marked model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.

M & L modular Switch 1 way 16 A,1 module 250 volts AC ISI marked , model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.

M & L modular Socket 6 A-2/3 pin combined 2 module shuttered 250 volts AC ISI, marked model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.

M & L modular Socket 6A/16A-2/3 pin combined,2 module 250 volts AC shuttered ISI marked, model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.

M & L modular Bell push, piano flush type, 6 amp 250 Volts, with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.

M & L ceiling rose 3 phase flush type 6 Amp 250V AC topline series with polycarbonate 20 X 50 mm two to three terminal, complete all as specified and directed by Engineer-in-charge.

M & L Electric / Electronic Bell, music type 230 Volt AC supply, complete all as specified and directed by Engineer-in-charge.

M & L Lamp holder of PVC/Polycarbonate type with back plate suitable for batten fitting including 9 watt LED bulb, complete all as specified and directed by Engineer-in-charge.

M & L squire profile Batten decorative type wall mounted LED 36 watt, white flux, , appx 4 feet long, pre wired , 6000K with inbuilt driver complete fitting and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector including taking down old unserviceable light fittings any type complete all as specified and as directed by Engineer-in-Charge.

M & L LED mirror light fiting 9/ 10 watt, 6000K, lineer & compact with decorative grey end caps, polycarbonate body and ribbrd opal diffuser complete fitting with lamp and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector, complete all as specified and as directed by Engineer-in-Charge.

M & L building security light IP 66 luminaire with high power LED of 35 watt with toughened glass complete with suitable GI for security light fitting fixing to wall/column & electrical connection to the light fitting providing 1.5 mtr long twin core round copper conductor cable of suitable size and testing complete all as specified and directed.

M & L in provision of High flow wave plus 400mm swing ,60W wall mounted fan, connecting up to ceiling rose using flexible copper wire three core complete all as specified and as directed.

M & L for submain wiring complete with two single core 4 sqmm 1100 volts grade, PVC insulated multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 4 Sqmm in and including PVC conduit size 20 mm complete all as specified and directed.

M & L for submain wiring complete with two single core 6 sqmm 1100 volts grade, PVC insulated multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 6 Sqmm in and including PVC conduit size 20 mm complete all as specified.

M & L metal enclousers made out of CRCA mild steel sheet, double door, powder coated DB Vertical TPN 4 way 415 Volt,(concealed in wall or as directed) dust and vermin proof incuding MCCB's 125Amp , complete all as specified and directed by Engineer-in-charge. Note:- Whereever the wall surfaces disturbed due to cutting of wall for insertion of DBs and conduit that wall to be finished with cement mortar ,bricks and putties as per matching of existing colour and cement work included in the quoted rate.

M & L (concealed in wall or as directed) factory made DB (made out of CRCA sheet) SPN, 8 Way 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including taking down unserviceable old DBs with its iron body covered box any type and size including MCB etc, taking down existing Electric meter from this iron box and arrangements of refixing existing this electric meter near this DBs, making good disturbed surfaces of walls as necessaty cement work complete all as specified and directed by Engineer-in-charge. Note:- Whereever the wall surfaces disturbed due to cutting of wall for insertion of DBs and conduit that wall to be finished with cement mortar ,bricks and putties as per matching of existing colour and cement work included in the quoted rate.

All as per item No 152 above but 4 way DB

M & L sheet metal enclosure Box (Concealed with wall) single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps, 240 volts,, complete all as specified and directed by Engineer-in-charge. Note:- Whereever the wall surfaces disturbed due to cutting of wall for insertion of DBs and conduit that wall to be finished with cement mortar ,bricks and putties as per matching of existing colour and cement work included in the quoted rate.

M & L MCB SPN 63 Amps, 10 KA 'B' curve 230 V AC, 50 Hz including necessary attachment including taking down old unserviceable MCB SPN, complete all as specified and directed by Engineer-in-charge.

M & L MCB SP suitable for 230 volts AC supply 40-63 Amps, SP rupturing capacity not less than 10KA,' B' Curve ISI Marked, 1 Module including taking down old unserviceable MCB SP, complete all as specified and directed by Engineer-in-charge.

M & L MCB SP suitable for 230 volts AC supply 5/6 to 32 Amps, SP rupturing capacity not less than 10KA,' B' Curve ISI Marked, 1 Module including taking down old unserviceable MCB SP, complete all as specified and directed by Engineer-in-charge.

M & L exhaust fan 250mm sweep made of sturdy engineering plastic complete with louvers ,voltage 230V,50Hz,RPM 1200 copper winding of sweep 250mm including making suitable hole on wall and its finishing of cement work and taking down existing outdated fans deposited to E/M store all as specified and directed by Engr-in- Charge

M & L storage type water heater (Geyser) electrical operated 230/240 Volts 25 ltr capacity, BEE 5 star rated complete with all safety equipment and accessories such as safety valve, thermostat, plug top, etc. required for proper functionality & including electric/earth connections and carrying out grounting & complete installations with mounting bolts,nuts including testing after installation complete including taking down old rusted and outdated gyesers to be deposited to E/M store all as specified & directed by Engr-in- Charge.

M&L 1200mm sweep ,BEE 5 star rated ceiling fans or exhaust fan with brush less direct current (BLDC) motor complete with blades , down roads,electronic regulator and acessories ,230V min air delivery 210 CFM with service value 6.00 complete all as specified and directed including taking down old ceiling fan and deposited to MES store yard

M&L earthing complete with galvanised steel plate electrode 600mm x 600mm x 6.3mm thick burried directly in ground (earth pit not less than 2.25 mtrs deep below normal ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts check nuts and GI washers earth plate surrounded by picked layer of coal dust and common salt 15cm thick all around bottom and top and watering pipe 20mm bore of GI pipe medium bore GI pipe light grade connected to funnel heavy wire mesh for watering purpose and 15mm bore GI pipe light grade for protection of galvanised earth wire from earth plate upto 7.5 metre and connecting to , main switch board including 10mm thick cast iron cover angle iron frame and PCC 1:2:4 type B-I for concrete pit, including necessary excavation and earth works etc , as shown in electrical plate No 5 of SSR Part - I of 1991 and testing on completion all as specified. Note : PCC chamber shall be constructed at least 1.5m away from earth pit pipe for watering shall be provided in slanting manner.

Material and labour for sand cushioning with a layer dry clean Ganga river of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified. Note: Punned thickness 18 cm shall only be measured.

M&L for sub class old size of brick in tenches for cable protection of LT cables complete all as specified and directed.

Cutting of floor/wall/road/ footpath for laying of LT/U/G Cable of any size description and making goof the same as per esisting specification after laying cable and all as specified and directed.

S&F GI pipe light grade 40 mm bore for cable protection fixed to wall/floor/under road with 02 Nos fixing clamps of FI 50X6 mm with nut and bolts complete all as specified and directed.

Supply and laying XLPE insulated , armoured heavy duty electric cable with alumnium conductor ,1100 volts grade ,corss sectional area 10 Sqmm 2 core complete all as specified & directed by Engr-in-Charge.

M.M.V. CONSTRUCTIONS (BID ID -3464834)

JOG CONSTRUCTION (BID ID -3464617)

M/s DKS Engineering Works (BID ID -3466367)