Construction of Model Crematorium at Karadagadia under Angul Municipality

Amount

Earth work in hard soil or gravelly soil within 50m. Initial lead and 1.5m. Initial lift icluding rough dressing and bracking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m. in depth and as per the direction of the engineer-in-charge.

Filling in foundation and plinth with sand watered and rammed etc. complete.

Cement concrete (1:4:8) with 40mm size Crusher broken hard granite metal including all cost of materials, labour, conveyance, royality, tools and plants water for curing etc all complete, as per OPWD specification required for the work to finished items of work

Cement concrete (1:3:6) with 12mm size Crusher broken hard granite chips including hoisting and laying all cost of materials, labour, conveyance, royality, tools and plants water for curing etc all complete, as per OPWD specification required for the work to finished items of work

Cement concrete (1:2:4) with 12mm size crusher broken hard granite chips including hosting and laying all cost of materials, labour, conveyance, royalty, Tools and Plants water for curing etc.all complete,as per O.P.W.D. specification required for the work to finished items of work.

Cement concrete (1:1.5:3) with 40 mm size crusher broken hard granite metal including all cost of materials, labour, conveyance, royalty, cess, Tools and Plants water for curing etc. all complete, as per OPWD specification required for the work to finished items of work.

RCC work M20 grade with 20mm and down grade crusher broken hard granite chips including hoisting and laying all cost of materials, labour, conveyance, royality, cess Tools and plants water for curing etc. all complete as per OPWD, specification required for the work to finished items of work Below plinth

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification

Rigid an smooth centring and shuttering for RCC works including false works and dismentalling them after casting including cost of materials complete in gorund floor Below Pl. level

Above plitnh

Fly ash bricks 23cmx11cmx8cm size having crushingh strength not less than 75Kg/cm2 with diamensional tolerance +2 percent in cement mortar (1:6) in foundation and plinth

12mm thick cement plaster (1:6) for brick work per 1 sqm

16mm thick cement plaster (1:6) over brick or stone masonary per 1 sqm

6mm thick cement plaster (1:4) finished smooth per 1 sqm

Fixing granite tiles on steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles.

Fixing kota tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles.

Fixing Ceramic tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles.

Fixing tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 Cement :1 Sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles

2.5cm artificial stone flooring with cement concrete (1:2:4) including punning using 12mm size hand broken granites chips

Finishing wall surface of walls with Acrylicwall putty (Water based ) of approved makeand finished smooth and even surface to receive painting including cost of scaffoldingstaging charges with cost of all materialstaxes, labour T&P etc complete.

Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade excluding cost of paint

Finishing wall with water proofing weather coat cement paint of approved shade on new work to given an even shade excluding cost of paint

Cement washing two coat per sqm

Supplying, fitting and fixing of Ornamental MS GATE as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all material, labour, T&P etc. required for the complete in all respect as per direction of Engineer-In-Charge.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.

Providing fabricating, wielding / or bolting, as required erecting and fixing truss and purlin in position, in true line and level including fixing with base plate fixed to R.C.C. elements with appropriate size viz. rafters purlins, trusses, plates including all accessories viz nut bolts, clears, gussets, labour, transportation etc as per specification complete with painting all members with two or more coats of approved anticorrosive paint over a priming coat complete in all respect as directed by the Engineer-In-Charge. Supply, fabrication, errection of steel, structures such as culumn, trusses etc with Raw steel consumable crane, labour etc. complete.

Providing, fabricating, erecting, fixing 0.47mm thick galvalum sheet of approved make and colour including cost of erecting, placing, drilling of holes and filling etc all complete as per the direction of Engineer-In-Charge

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutterof 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

30mm thick Fiber glass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.

Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge for 100 cum.

Supplying and stacking of good earth at site including royality carriage and good earth cost up to 5 Km lead complete (earth measured in stacks will be reduced by 20% for payment)

LANDSCAPE Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading any neatly leveling within a lead of 50m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth , sludge or manure).

MEDICINES Supplying of approved quality of Manure like vermi compost, neem cake,hormone medicines,insectide medicine,antitermide medicines including cost and conveyance etc. complete as per direction of Engineer-in-charge. Supply of Vermi Compost (50 kg Bag)

Supply of Neem Cake (50 kg Bag)

Supply of Hormone Medicine (Totozyma or equivalent)

Supply of Insecticide Medicine (Roger or Equivallant)

Supply of Antitermite Medicine (Classic-50 or Equivalent)

Supply of Fertilizer Di Amonia Phosphate (DAP) (PPL, IFCO or equivalent) 50 Kg Bag

Supply of Super Phousphate (PPL, IFCO or equivalent) 50 Kg Bag

Supply of Potas (PPL, IFCO or equivalent) 50 Kg Bag

Supplying and stacking of good earth at site including royality carriage and good earth cost up to 5 k.m lead complete ( earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking at site dump manure from approved source, including carriage (manure cost) upto 5 k.m lead complete (manure measured in stacks will be reduced by 8 % for payment): Screened through sieve of I.S .designation 20mm

Spreading of sludge, dump manure and /or good earth in required thickness as per direction of office in-charge (cost of sludge , dump manure and/or good earth to be paid

Mixing earth and manure in the required proportion specified or directed by the officer -in-charge

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume ( 2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8 % ) flooding with water , dressing including removal of rubbish and surplus earth , if any , with all leads and lifts ( cost of manure,sludge or extra good earth if needed to be paid for separately). Holes 60 cm dia , 60 cm deep

Holes 45 cm dia , 45 cm deep

Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, hedge, flower beds, foliages, creepers etc. including hoeing, weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide , lawn mover and brush cutter with fuel will be provided by the Department & other T & P material/articles shall be provided by the contractor.)and as per direction of officer in charge.

PLANTS Providing & transplanting best quality healthy TREES species [Acacia nilotica (Babul), Alstonia scholaris (Devil's tree), Anogeissus latifolia (Axle wood), Artocarpus integrifolia (Jack fruit), Azadirachta indica (Neem), Bauhinia purpurea (Orchid tree), Bombax malabaricum (Semal), Butea frondosa (Flame of the forest/Palash), Callistemon lanceolatus (Bottle brush),Cassia fistula (Amaltas), Cassia siamea, Chorisia speciosa (Silk cotton tree), Dalbergia sisso (Sheesham), Delonix regia (Gulmohur), Dendrocalamus strictus (Bamboo), Emblica officinalis (Aonla), Eugenia jambolana (Jamun), Ficus benjamina, Ficus elastica (Rubber), Ficus glomerata, Ficus religiosa(Peepal), Holorrhaena antidy senterica, Lagerstroemia flos reginae, Madhuca indica (Mahua), Mangifera indica (Mango), Melia azardirachta, Morus indica (Mulberry), Ocimum americanum, Plumeria obtusa, Pterospermum acerifolium (Kanak champa), Samanea saman (Rain tree), Saraca indica (Sita ashok), Shorea robusta (Sal), Tamarindus indica (Tamarind), Tectona grandis (Teak), Terminalia arjuna, Terminalia chibula, Terminalia bellarica, Ziziphus jujuba (Ber) or any other native/drought tolerant species or as per the owners chouce] of approx height 2500mm.

Providing & transplanting best quality SHRUBS and HEDGES special [Allamanda schoti, Bauhinia tomentosa, Caesalpinia pulcherrima, Calliandra haematocephala, Cassia biflora, Cestrum diurnum, Clerodendron inerme, Cyprus rotundus, Duranta goldii, Duranta variegated, Ficus blakei, Ficuspanda, Ficus nuda, Ficus reginold, Ficus starlite, Gardenia jasminoides, Hamelia patens dwarf, Heliconia spp., Hibiscus rosa sinensis, Hibiscus variegated, Ixora chinensis, Ixora singaporensis, Jatropha panduraefolia, Jasminum spp., Melaleuca bracteates, Murraya exotica (mock orange), Nerium oleander alba, Nerium oleander roseum, Nerium oleander dwarf, Plumbago capensis, Spider lily, Strelitzia regia, Tabernaemontana coronaria 'dwarf', Tabernaemontana coronaria variegated, Tecoma capensis (Capehoney suckle), Tecoma gaudichaudi, Tecoma stans, Thevetia nerifolia, Thuja spp., Vinca rosea, Vinca rosea alba, Yucca gloriosa or any other native / drought tolerant species or as per the owner's choice] of approx height 450-900mm in erect position without breaking the earth balls around the roots, packing the soil tight around the plant and water properly, including preparation of beds for hedging and shrubbery by excavating 600x600mm deep, pits dug a few days in advance, top soil with manure (compost) 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) along with Urea, N.P.K. mixed in proportion as per the suppliers specifications, flooding with water, dressing including removal of rubbish and surplus earth if any with all leads and lifts etc. all complete. All shrubs to be approved before planting inclusive lf maintenance as specified for one year after planting including rectification / replacement of any damaged work or plant, watering at required frequency, providing and laying manure as required etc. all complete.

Providing and transplanting best quality Edge Plant Species i.e. Duranta goldii, Duranta variegated, or any other native / drought tolerant species or as per the owner's choice along pathways of approx. height 250-400mm in erect position without breaking the earth balls around the roots, packing the soil tight around the plant and water properly including preparation of beds for hedging and shrubbery by excavating 300x300mm deep, pits dug a few days in advance, top soil with manure (compost) 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) along with Urea, N.P.K. mixed in proportion as per the suppliers specifications, flooding with water, dressing including removal of rubbish and surplus earth if any with all leads and lifts etc. all complete. All species to be approved before planting inclusive lf maintenance as specified for one year after planting including rectification / replacement of any damaged work or plant, watering at required frequency, providing and laying manure as required etc. all complete.

Planting best quality pot-grown healthy ORNAMENTAL PLANTS species [Agave spp., Bamboo buddha belly, Bismarckia nobilis, Cycas circinallis, Cycus revoluta, Furcarea watsoniana, Golden bamboo, Phoenix roebelenii, Phoenix sylvestris, Sansveira spp., Washingtonia robusta, Wodyetia bifurcata, Roystonea regia (Royal plam) or any other native / drought tolerant species or as per the owner's choice] of approx. height 1500-2500mm in erect position with minimum stem of species in erect position without breaking the earth balls around the roots, packing the soil tight around the plant and water properly, including preparation of beds by excavating 1200 x 1200 mm deep, pits dug a few days in advance, top soil with manure (compost) 2: 1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) along with Urea, N.P.K. mixed in proportion as per the suppliers specifications flooding with water, dressing including removal of rubbish and surplus earth if any with all leads and lifts etc. all complete. All plants to be approved before planting inclusive of maintenance as specified for one year after planting including rectification / replacement of any damaged work or plant, watering at required frequency, providing and laying manure as required etc. all complete.

P.H. WORKS Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor cpvc pipes conforming to ASTM-D-1785/89 (Sch-80)/ASTM Pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge 50mm cpvc pipe

40mm cpvc pipe

20mm dia cpvc pipe

25mm dia PVC ASTM pipe (Sch-80)

32mm dia PVC ASTM pipe (sch-80)

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor galvanized mild steel tubes (medium grade) conforming to IS: 1239/1990, part-1 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge 25mm dia G.I. Pipe

40mm dia G.I.Pipe

32mm dia G.I. Pipe

Supplying all materials, labour,T&P and painting two coats with white enamel paint brushing interior over one coat of priming with red oxide zinc chrome primer on the external surface of new galvanised mild steel tubes and fittings of following nominal diameter to give an even shade including preparing the surface and clearing the surface of all all dirts, dusts and foreign matters as per direction of the Engineer in charge. 25mm dia 32mm dia

40mm to 50mm dia

40mm to 50mm dia

Supplying all materials, labour, T&P and cutting holes in RCC floor,roofs slabs,chajjas etc. including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. Hall area

External

Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. 250mm thick wall (ground floor)

250mm thick wall (other area)

Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge. 250mm to 375mm thick wall

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In ground floor

In other concern area

Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. 15mm dia CP Bib cock) jaqur/Kingstone/Somany) (Long)

15mm dia CP L.B. pillar cock jaqur/Kingstone/Somany) (OPL-15001)

15mm dia CP angle stop cock jaqur/Kingstone/Somany)

50mm dia brass or gun metal full way valve (shakti make)

15mm dia CP flange

15mm dia CP extension piece

125mm dia CP grating

15mm dia CP Health faucet jaqur/Kingstone/Somany)

15mm shower (Jaquar)

Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge. 10 liters PVC LL cistern (Silm-line white

Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class Fly ash brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. 1000 ltr. capacity water storage sintex tank

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge. 150mm UPVC pipe

110mm dia UPVC SWR pipe (Supreme/Ashribad)

110/160mm UPVC door Tee

110mm UPVC plain bend

110mm UPVC P trap

110mm UPVC offset

110mm UPVC door bend

110mm UPVC Cowl

Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan conforming to IS:2556-part-3-2004) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge. 580mm size Prissa Pan (Parrywear/Hindware/Somany)

Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge. EWC with 'P' trap plain with seat cover (parrywear/Hindware/Somany)

Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge. a) 550mmx400mm size wash hand basin with pedestal (parrywear/Hindware/Somany) (for extra)

Counter top basin of size 560x455mm (parrywear/Hindware/Neycer) (for extra)

Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge. a) Half stall urinal (hindware)URS-WHT1326j with cost of 15mm dia urinal spreader & 32mm dia CPdome waste

Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge. a) 600mm x450mm size BE mirrior

Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge a) 600x125mm plate glass shelf with CP guard rails

Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge a) CP soap holder

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. A) CP soap holder

Fitting & Fixing of Acquagurd cooler Cum Purifier For drinking water provision.

Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. a) Inside size 910mmx910mm

b) Extra addl. Depth for MH 0.3m upto 4.5m depth

c) Fitting and fixing RCPC cover

Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3 (0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. a) 110mm dia alround concrete

Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. a) 1.20m diax2.55m with K.B. bricks

Const. of 50 user septic tank Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.

Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge RCC floor and roof slab

Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.

Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge

Supplying all materials, labour, T&P and providing cement concrete (1:2:4)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.

Excavation of foundation in laterite rock or any hard rock (other than granite or disintegrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.50 mtr. in depth and depositing the soil within initial lead of 50 mtr. and as per specification approved by the Department.

Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size crusher broken hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour T&P and providing 12mm thick cement plaster (1:4) with punning or brick work including watering curing, conveyance of all materials to swork site, payment of royality,taxes etc all complete as per specification and direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and fitting and fixing M.S.Step Iron etc all complete as per specification and direction of the Engineer in charge

Fitting and fixing RCPC cover

Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge

Supplying Horizontal pump with sqirrel cage induction type submersible type submerssible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034 - 2002 with following specifications 1 HP single phase 3 stage head range 20 to 35 meteres, discharge 145 to 110 L.P.M with outlet dia of 25mm

DOL control pannel

2.50 sqmm cable

Supplying all labour, T&P and drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (650 cfm/ 200 psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 125 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well). Labour for drilling of 125x100mm dia bore

Supplying all materials, labour, T&P and Lowering the following size G.I/ PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above. For lowering of 125mm dia PVC/GI casing pipes

Supplying all labour, T&P and Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge.

Supplying all materials,labour T&P for fitting and fixing of IM-II/IM-III hand pumps with 32/65 mm dia G.I pipe 24mtr and C.I cylinders and 12 mm B.S connecting rod including lowering with fitting of extra socket etc.as per the direction of the Engineer-in-charge

Supplying and fixing of Skt PVC pipe 075mmx06Kg

Supplying and fixing Skt PVC pipe 063mmx06Kg

Supplying and fixing Skt PVC pipe 050mm x06Kg

Supplying and fixing HUNTER POP-UP, ADJ_PGP ULTRA

Supplying and fixing Control Valve 75mm Teflon Seal plain

Supplying and fixing IRRIGATION VALVE BOX 10"

Supplying and fixing 3/4"x30CM STD Swing joint,4 SWI

Supplying and fixing SERVICE SADDLE 50MM x25mm (3/4) HD

Supplying and fixing PVC Non Return valve 63mm

Supplying and fixing END CAP (PLAIN) 50mm- HD

Supplying and fixing TEE(EQUAL) 75mm-HD

Supplying and fixing TEE(EQUAL) 63mm-HD

Supplying and fixing TEE(EQUAL) 50mm-HD

Supplying and fixing ELBOW (EQUAL) 75mm- HD

Supplying and fixing ELBOW (EQUAL) 63mm- HD

Supplying and fixing ELBOW (EQUAL) 50mm- HD

Supplying and fixing REDUCER 75x63mm-HD

Supplying and fixing REDUCER 63x50mm-HD

Supplying and fixing PERMA FIX 1L-TI

INTERNAL ELECTRIFICATION Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor with earth wire single core cable in surface / recessed medium class PVC conduit, with modular switch, socket, suitable GI box of Make-Schneider/Roma/legrand and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. CATAGORY AS FOLLOWS ,complete suitable for GRID. i) Single light/fan/ex.f point controlled by one 6A switch or first light/fan/exf/cb point with indivisual control .Modular type point. GROUP-A

Single light/fan/ex.f point controlled by one 6A switch or first light/fan/exf/cb point with indivisual control.Modular type point . GROUP-B

Single light/fan/ex.f/call bell point controlled by one 6A switch or first light/fan/exf/cb point with indivisual control.Modular type point. GROUP-C

Total room controller with 16A CARD LOCK system with all accessories control entire light/fan/ex. Fan/call bell point.

subsequent point of group control

6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type) & other required accessories of ISI marked as approved. Make-Schneider/Roma/legrand.

6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type) cover,modular board & other required accessories of ISI marked as approved.Make-Schneider/Roma/legrand

2x6A Plug on the separate board For Power supply point or TV point & other use for equipement with complete fitting by 02 nos of 5A switch & socket(modular type) cover,modular board & other required accessories of ISI marked as approved.Make-Schneider/Roma/legrand

Supplying and fixing 2 nos 15/16A modular socket with 15/16A Switch & 1 no 6A modular switch with socket with box & modular plate & switch box including connections but excluding modular plate etc. as required. Make-Schneider/Roma/legrand

Wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor, single core cable (Finolex/ Polycab/RR/RHINO) or any other equivallent reputed make ISI marked as approved, in surface/ recessed PVC conduit medium (AKG or any other equivallent reputed make ISI marked as approved) as required. i) 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor.(LDB to LSB/LIGHT CKT)

2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR)

4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 1.5 sq. mm copper wire for earth continuty conductor.(LDB to LSB/5A SOCKET)

2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor.(PDB to PSB/ GAYSER POINT/AC POINT/ROOM LIGHT CONTROL TO CORRIDOOR CARD POINT/DG PANEL ACCL TO EACH QTR ESSENTIAL LOAD)

4 nos single core 4 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor.(PDB to PSB/GAYSER. POINT/AC POINT/DG PANEL ACCL TO EACH QTR ESSENTIAL LOAD)

4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductor.(LFDB TO LBDB/power unit/point)

4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductor.(LFDB TO FLOOR PANEL TO TPN BDB)

4 nos single core 16 sq. mm copper wire for phase and neutral and 02 nos of single core 10 sq. mm copper wire for earth continuty conductor.(FLOOR PANEL TO TPN BDB)

2 nos single core 16 sq. mm copper wire for phase and neutral and 01 nos of single core 10 sq. mm copper wire for earth continuity conductor.(FLOOR PANEL TO BDB)

2 nos single core 10 sq. mm copper wire for phase and neutral and 01 nos of single core 6 sq. mm copper wire for earth continuity conductor.(FLOOR PANEL TO BDB)

Supplying and fixing 5/6A modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required. of Schneider/ Roma/legrand / Havells make.

Supplying and fixing 3 pin 5/6A modular socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. of Make-Schneider/Roma/legrand /Havells

Supplying and fixing 15/16A modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Of Make-Schneider/Roma/legrand /Havells

Supplying and fixing 15/16A modular socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Of Make-Schneider/Roma/legrand /Havells

Supplying and fixing 32 amps, 240 volts, DP ON/OFF MASTER SWITCH on surface or in recess, with chained metal cover , and complete with connections, testing and commissioning etc. as required. Schneider/Roma/Havells make

Supplying and fixing 32 amps, 415 volts, TPN, industrial type socket outlet, with 4 pole and earth metal enclosed plug top along with 32 amps. C-series, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. Legrand/Hager/Siemens make

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. MAKE-Legrand/L&T/Siemens/Schneider 4 moudle(125mmx75mm)

1 moudle(75mmx75mm)

12 moudle(200mmx150mm)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.MAKE KINJAL/ AKG 40 MM

Supply and fixing modular type indicator on the existing switch box/cover of Anchor make.

Supplying and installation of AC starter Modular type,L&T/Siemens make or any other equivalent reputed make as approved coil voltage-415 Volt A.C. & O/L range of 9-14A range on mod Box of suitable size including modular cover.

Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover of Anchor make.

Sub-Head II (Light fitting Fixture & Fan Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan of Havells velocity/CROMPTRON JURA Make or any other equivalent reputed make star rated as approved including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required.(With fan Regulator)

SITC of energy efficient LED tube light fittings with decorative batten and LED tube light having power rating not more than 20 watt and lumen output not less than 1800 lumen complete with electronic driver and all other accessories with diffuser i/c connection etc as required. (Similar to WIPRO Model No:LL20-221-XXX-65NE1 or similar make of /Osram/Trilux/PHILIPS)

Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.

Supplying, installation, of wall fan of heavy duty 400 mm PLATINA brand of Havells (Make-Havells/almonard/cromptron make or any other equivalent reputed make star rated as approved) of exhaust fan in the existing wall, including fixing & conntection.

Supplying and fixing of Energy efficient surface mounted LED luminaire with white powder coated ,pressure die-cast Al housing ,with high transmititivity,non-yellowing PMMA diffuser, with wattage not more than 11 watt and lumen output not less than 80 lumens/watt,CRI not less than 80,CCT of 5700-6500 degree K,THD less than 10%, with electronic driver and all other accessories suitable for operation on 230 V, 50 Hz supply as reqd. ( Make : WIPRO Model No:CRDL10R010HP60 similar make of /Trilux/Osram/PHILIPS)

TELELPHONE & LAN WIRING Supplying and drawing CAT6 LAN WIRE protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required

Supply & drawing of the 4 pair,0.5 sqmm telephone cables in existing surface/ recessed conduit etc. as required.

Supplying and telephone socket socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required

Supply, Delivery, Installation & Testing of Information Outlet with SMB I/O boards containing a clip-in-type modular Data socket with top fixed on metallic concealed box including connections and making good the damages caused complete as per direction of Engr.-in-charge.

Supplying & Commissioning of Telephone Hand Set.

Supplying & installation of 200 pair KRONE make moudles with locking & key arrangements fabricated with MS sheet & powder coated to be fixed on concealed manner incl. good the damages.

260 Lines EPABX expandable upto 256 Lines

4 Core cabling PVC pipe in concealed manner

LAN Supplying and Commissioning of 6U Rack with all accessories.

Supplying & Commissioning of Managed Cat 6 24 Port Switch.

Supplying & Commissioning Cat 6 24 Port Patch Panel.

Patch Chord CAT 6 One meter long.

Patch Chord CAT 6 Two meter long.

(Earthing) INSTALLATION S/IT/C of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.

Excavation of all kinds of soil up to 3 meters depth incluiding refilling (Except rocky soil )

Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.

Providing and fixing 25mm x 5 mm G.I strip on surface or in recess for connections etc. as required.

Providing and fixing 50mm x 6 mm G.I strip on surface or in recess for connections etc. as required.

Refilling/Back filling soft soil with borrowed within a lead of 5 K.M. etc. as required.

Excavation of hard-rock up to 3 meters depth including getting out the excavated soil disposal of the excavated soil as directed with lead of 50 meters.

Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required.

CABLING AND END TERMINATION INTERNAL SUB AREA Supplying and laying of one number PVC insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade POLYCAB/FINOLEX/HAVELLS of following size cables with in different types laying. i) 4core x 16 sq mm (surface)(MDB TO BDBL/UDB)

2 core x 4 sq mm (surface)(for BUILDING FOCUS LIGHT)

4 core x 16 sq mm (open duct)

3.5core x 35 sq mm (OPEN DUCT)(To BDBP/AC

Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable. 4 core x16sq mm

3.5 core x35 sq mm

Providing,fixing and laying of fallowing dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling. 50 mm dia

80 mm dia

CABLE TRAY / RACE WAY FOR DISTRIBUTION OF POWER HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 200mm(W), of Legrand - Cablofil make or equievalant reputed make ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required.

HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 300mm(W), of Legrand - Cablofil make or equievalant reputed make ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required.

HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 400mm(W), of Legrand - Cablofil make or equievalant reputed make ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required.

HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , FLOOR RACE WAY WITH JUNCTION with internal dimensions of size 54mm(H) x 200mm(W), of Legrand - Cablofil make or equievalant reputed make ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter) WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required.

HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , FLOOR RACE WAY WITH JUNCTION with internal dimensions of size 54mm(H) x 300mm(W), of Legrand - Cablofil make or equievalant reputed make ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories, bend, cover, supporter) WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required.

CCTV SURVELINE SYSTEM WITH WIRRING 1.3 Mp AHD IR Bullet/Dome Camera

16ch AHD DVR

32" LED Monitor

12V 20 Amps Power Supply

15U Val Rack

RG6 + 2 Core Power Cabling

4 TB Hard Disk

SITCC

SOLAR SYSTEM 350Wp, Voc=46.1V, Isc= 9.13A, AM=1.5, IP67rated, Rated voltage = 1000V DC/1500V DC, Efficiency>16.5%, Solar cell per module=72, poly crystalline

MPPT Technology based Solar PCU with Mobile app and MCB protection, Running Load-Up to 3,000 watts, Battery Support- 40 Ah - 150 Ah,Battery System-48 Volt (4 nos. of 12 V Battery required), Wave Type- Pure Sine Wave, Rated Capacity-3000 watts,Protection-Overload, deep discharge, short-circuit, Battery low cut off.

Rated Capacity-150 Ah,Technology-Tall Tubular,Inverter support-900 VA – 10 KVA,Nominal Voltage-12 Volt, Lead-acid Type.

4sq.mm Cu-cable,Working Voltage : DC 1000 V, Insulation Resistance : 1000 MW-km

35sq.mm Cu-cable,Working Voltage : DC 1000 V, Insulation Resistance : 1000 MW-km

Thickness 20 mm , End clamp, middle clamp

550Volt, Frame Degree Rated Current(A)-63,Pole-2P,Rated Operating Voltage(VDC)-DC12V-DC1200V,Rated Current In (A)-1-63A,Rated Insulation Voltage Ui (VDC)-1200VDC,Rated Impact Voltage Uimp (KV)-4,Ultimate Breaking Capacity Icu (KA)-6,Run Breaking Capacity Ics (%Icu)-75%,Curve Type-C,Trip Type-Thermal-magnetic

Rated Current-125amps,Rated voltage-250V,No. of pole-Single pole,

No- of poles -2P Current Rating: 20-40kA,Rated DC Voltage- 600V

2P AC SPD-Single Phase, as per IEC61643.1, GB18802.1

MC4 & T Connector, Changeover, Lug, Cable Tie, C-Clamp,IP65 rated

PATHWAY LIGHT POLE:Aluminium pressure cast 2.5ft. LIGHT SOURCE-LED, Driver Technology -IC based, 130lumen/watt, Luminaire light beam spread -7° - 9° x 177°,Housing Material-Aluminum die cast, LM-80 , IP 65, pf>0.98,watt-9W,Input Voltage -100 to 240 V, Input Frequency - 50 Hz, Ambient temperature range - -40 to +50 °C,Init. Corr. Color Temperature -4000 K,Init. Color Rendering Index- >70,Power consumption tolerance- +/-11%,LED MAKE- philips/edition

POLE:GI tube 2.5mm thickness, inner dia 2'',Pole Structure-Cylindrical/Tubular,LIGHT SOURCE-LED, Driver Technology -IC based, 130lumen/watt, Luminaire light beam spread- 7° - 9° x 177°, Housing Material -Aluminum die cast,LM-80 , IP 65, pf>0.98,watt-12W,,Input Voltage -100 to 240 V, Ambient temperature range - -40 to +50 °C,Init. Corr. Color Temperature -4000 K,Init. Color Rendering Index- >70,Power consumption tolerance- +/-11%,Input Frequency - 50 Hz,LED MAKE- philips/edition

Rated Voltage-1100V, Material- Plain annealed high conductivity Flexible copper conductor as per Class 5 of IS 8130/2013 latest, Max. D.C Cond. Resistance at 20 Deg. C.-26.0 Ohm/km, Insulation Material - PVC type D, Insulation thickness- 0.6mm, Sheath Material - Extruded PVC Type 'ST3' as per IS:5831/84, Sheath Thickness- 0.9mm, Max. conductor temp. under normal operating conditions - 70°C, Max conductor temp at the termination of short circuit - 160°C,As per IS 8130/2013,IS 694/2010, etc. with latest up to date amendments

Rated Voltage-1100V, Material- Plain annealed high conductivity Flexible copper conductor as per Class 5 of IS 8130/2013 latest, Max. D.C Cond. Resistance at 20 Deg. C.-19.5 Ohm/km, Insulation Material - PVC type D, Insulation thickness- 0.6mm, Sheath Material - Extruded PVC Type 'ST3' as per IS:5831/84, Sheath Thickness- 0.9mm, Max. conductor temp. under normal operating conditions - 70°C, Max conductor temp at the termination of short circuit - 160°C,As per IS 8130/2013,IS 694/2010, etc. with latest up to date amendments

Supplying,fitting ,fixing & commissioning Human Electrical Cremation system model named OSSPL-ELE/02 having power 64-76 KW & cremation furnance of mild steel (IS2062).

Installation with all required material 100 KVA

Transportaion,loading & unloading (2 Load)

DUSTBIN Providing and fixing in position self standing FRP Frog / Animal shape dust Bin approved design and make of minimum size of 1.5mX0,60m (capacity min 80 ltrs) designed for accommodating dry as well as wet kind of trash in the garden made out of in pure polyster Fiber glass Reinforced Plastic (UV resistant finishing) of 2mm thk. with matt finish.

MUSIC SYSTEM Supplying fitting fixing of AMPLIFER 75 WATT

Supplying fitting fixing of MUSIC HORN 40 WATT

Speaker wire

LOCKER UNIT Locker Units: A) Providing, making and placing in position low/full height locker units 300 mm height, 300mm width as directed and 200 mm depth made with 18/19 mm plywood top, side, bottom, shelves & 8 mm thk ply for back and middle side . All the external surface shall be finished with 1.00 mm thk laminate (dark for bands and light for body) . The shutter shall have 25 mm mdf board 'post-formed' edge with pf lamination, Inner/unexposed surfaces to painted with two or more coats of enamel paint with putty finish including melamine polish finish for all wooden members. The rate to include cost of all necessary hardware viz., cabinets hinges, locks, handles, tower bolts etc. The unit should have beech wood beading 25x40mm at top/edge lipping 20x6 mm complete. locker no 12 unit 1, four in a row and 3 in column.

BIJAY SETHY