Entry Gate Fencing and Hut work at Various Advance Work, Creation of Water Point at Plantation , Gabion Constructin of Range Gangapur city

Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed : All kinds of soil

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Random Rubble masonry with hard stone in cement sand mortar including curing and mixing of mortar in foundation in ration Cement Mortar 1:6 ( 1-Cement : 6-Sand).for kattle guard hut and gate piller

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand)

25 mm thick cement plaster on new surface of walls in two coats including smooth finishing in cement sand mortar in ratio 1:6 including curing etc. complete.for kattle guard hut and gate piller

White washing with lime to give an even shade including all scaffolding:.for gate piller

Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, with ceiling pointing in cement sand mortar 1 : 3 complete as per specification and instruction of Engineer In Charge

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.gate and door

Digging of pits (size 0.45 m x0.45 mx0.45m or (0.50+0.40) /2X (0.50+0.40) /2x0.45 cubic meter) In hard muram /kankar/compect clay soil for cement post

1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size).