Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.7 LAccepted-AOC A 102 GOLDEN SAND APARTMENTS GAZIPUR DHAKOLI ZIRAKPUR PB 160104 | ZIRAKPUR | S A S NAGAR | PUNJAB | 160104 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹35.3 L+₹10.6 L (43.1%)Rejected-Finance | L2 | Rejected-Finance Being L2 |
Tender Value
₹32.7 L
EMD Value
₹65,400
Closing Date
21 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE PATIALA
HQ CWE, BLDG NO 26, NEW LAL BHAG, PATIALA 147001
PROVN OF ROAD FOR EME BN AT OLD CANTT UNDER GE N PATIALA AND PROVN OF ROAD FROM BUILDING NO P 71 TO P- 0 UNDER GE SOUTH PATIALA AT PATIALA MIL STN
2023_MES_577561_1
8322/PAT/T-51/2022-23
Open Tender
Civil Works - Roads
Item Rate
120 days
PATIALA
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE North Patiala
₹65,400
10 Mar 2023
27 Jan 2023
23 Feb 2023
27 Jan 2023
21 Feb 2023
10 Feb 2023
27 Jan 2023 - 3 Feb 2023
Amount
Surfaces excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil including removing to a distance n. exc 50 mtr and deposited where directed.
Excavation over area n exc 1.5m deep and getting out in soft/loose soil complete all as specified
Rolling and consolidation formation surfaces with 8 to 12 tonne power roller incl filling in softs spots hollow and depression etc which occurs during rolling for portion coming on cutting/ original ground only to required level gradient or camber etc including watering before or during rolling complete all as specified and as directed
Providing, Laying, compaction of granular sub base by providing close graded materil conforming to specifications ie Grading II, conforming to Clause 401 of MORT&H Speciifcations for Road and Bridge Works (Fifth Revision) mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller of capacity 8 to 12 tonne to achieve the desired density, 150 mm thick compacted thickness, complete all as specified and directed
Providing, Laying, compaction of Wet Mix Macadam conforming to Clause 406 of MORT&H Speciifcations for Road and Bridge Works (Fifth Revision) 250 mm thick (compacted thickness, 125mm thick in two separated layers) with mechanically crushed graded stone aggregate and granular material (size range 53mm to 0.075mm) grading of aggregate as per Table 400-13 of MORT&H Speciifcations for Road and Bridge Works (Fifth Revision), icluding premixing the material with water at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub base/base course on well prepared surface and compacting with vibratory roller of 8 to 12 tonne capacity to achieve the density desired,required gradient and camber etc, complete all as specified and directed Notes:- 1. WMM shall be laid in two layers. ie each layer of 125mm thick (compact thickness) 2. For payment purpose, both layers shall be considered as one unit
Preparation of un-surfaced Wet Mix Macadam surface by brushing with wire brushes for removing caked mud, dust, loose material, foreign material etc, sweeping with power brooms and finally fanning the cleaned surface with air compressors to remove all loose dirt etc, and applying evenly a priming coat conforming to Clause 502 of MORT&H Speciifications for Road and Bridge Works (Fifth Revision) with cationic bituminous emulsion SS1 grade, conforming to IS8887 (latest edition) @ 7.5kg per 10 Sqm using primer distributor which shall be self propelled or towed bitumen pressure sprayer complete all as specified and directed
Providing and laying Premix Bituminous macadam of consolidated thickness n. exc. 50mm, using paving bitumen binder of grade VG-30 @ and binder content of 4% by weight of total mix with mixing of aggregates and VG-30 bitumen in electronic operated 100-120 TPH batch type hot mix plant, transporting the hot mix from HMP to work site by tippers and laying with hydrostatic paver finisher (Paver shall not be compulsory in case of patch work using B.M.) and as per approved mix and rolled & compacted to required camber and gradient with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per Clause 504 MoRTH (5th Rev) specification and as specified and as directed. NOTES : 1. The contractor shall quote the rate against Item considering 4% VG-30 bitumen content. Job Mix Formula as per CI. No. 505.3.3 of MORTH (5th Rev) for BM shall be worked out from Thapar Institute of Engg & Tech Patiala/ NIT Kurukhshetra/ PEC Chandigarh/ CTL/ NITTTR Chanigarh/ National Test House/ Approved Govt Labs (appproved by NABL) for obtaining optimum binder content (OBC) by the Contractor without any financial effect to the Dept and same be submitted to the concerned GE for approval. Any variation in binder content on minus side shall be adjusted @ 45/kg of binder and no adjustment shall be made on plus side. 2. The BM shall be covered with top layer/wearing course within in a maximum of 48 hours. If there is to be any delay, by the contractor the course shall be covered by seal coat to the requirement of Clause 512 of MORTH (5th Rev) before opening to the traffic. The seal coat in such cases shall be considered incidental to the work and shall not be paid for separately. 3. Only packed paving bitumen VG-30 shall be used and same shall also be verified by GE on ground before start of execution of work.
Providing and laying Premix Bituminous concrete 30mm consolidated thickness with 5.5% binder (paving bitumen of grade VG-30) content by weight of total mix and crushed aggregates of grading 2 with mixing of agrgregates and VG-30 bitumen in electronic operated 100-120 TPH batch type hot mix plant, transporting the hot mix from HMP to work site by tippers and laying with hyrdostatic paver finisher and as per approved mix and rolled & compacted to required camber and gradient with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per Clause 507 MORTH (5th Rev) specification and as specified and directed. NOTES : 1. The contractor shall quotes the rate against Item considering 5.5% VG-30 bitumen content. Job Mix Formula as per CIause. No. 505.3.3 of MORTH (5th Rev) for BC shall be worked out from Thapar Insti. of Engg & Tech. Patiala/ NIT Kurukshetra/ PEC Changigarh/ CTL for obtaining Optimum Binder Content (OBC) by the Contractor without any financial effect to the Dept and same be submitted to the concerned GE for approval. Any variation in binder content on minus side shall be adjusted @ Rs 45/kg of binder and no adjustment shall be made on plus side. 2. Cost of filler i.e. cement (Ordinary portland cement/OPC) is deemed to be included in quoted unit rate. 3. After spreading of mix as per clause 507.4.7 entire surface during the operation shall be rolled with road roller 8-10 tonne (smooth wheeled) followed with vibratory road roller of 8-10 tonne static weight, followed by finished rolling with 6 to 8 tonne smooth wheel tendom roller as per Clause Nos. 507.4.8 and cost of the same is deemed to be included in quoted unit rate.
M&L for factory made rubber moulded pre-cast cement concrete type B1 1:2:4 (20 mm graded aggregate) in CM 1:4 in Kerb stone use with plain fair faces, including chamfers, weatherings,throat- ing etc. and setting in mortar complete with joints to match including embedding in the ground to depths indicated and tamping ground around and also for removing any surplus spoil to a distance n. exc. 50 mtrs complete all as specified and as directed.
M&L for 200 mm bore reinforced concrete pipe, class NP-3, laid and jointed complete with collars complete all as specified and as directed.
M&L for cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in bed to drain pipes of 200mm dia including packing under, and completey surrounding pipes with concrete after they are laid and tested complete all as specified and as directed.
Hardcore of broken stones or boulders of guage n exc 63mm, deposited , spread, levelled in layers n exc 15 cm thick each layer including watering and well ramming to a true surface
100mm thick PCC 1:4:8 type D-2 using 40mm graded aggregate as in sub base flooring
M&L for machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block with grey cement and no pigment any shape and size conforming to IS : 15658-2006 of 80 mm thickness, M-40 grade with 6mm top layer of anti abrasive material, including filling of interstices with fine sand laid over and including 25 mm thick (compacted) fine sieved sand cushioning complete all as specified and as directed.
M&L for machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS : 15658-2006 of 80 mm thickness, M-40 grade with 6mm top layer of anti abrasive material, including filling of interstices with fine sand laid over and including 25 mm thick (compacted) fine sieved sand cushioning complete all as specified and as directed.
Marking strips, straight line, Zebra crossing and stop line not less than 2mm thick with hot applied thermoplastic road marking paint of make Shivalik (Prismo) (white or yellow) by using automatic mechanical road painting machine and glass beads @ 250 gm/Sqm confirming to CI No. 803.4 of MoRTH in strips on road surfaces complete all as directed.
ABS Road colour cat eyes having dual direction (both sides) of size 100mm x 100mm x 18-20mm having body ABS fitted with epoxy, adhesive as per manufactures pin 12 cm long for fixing on road complete with PMMA lens with load capacity greater than 50 kg with visibility 800 mtr etc complete. Make of road cat eye as approved by GE.
Road convex mirror of size 600mm fixed with stainless steel pole of size 50mm dia and minimum height 1.75 mtr with grouting in PCC 1:2:4 type B2 of 300x300x300mm in base including excavation and earthwork complete all as specified. Make as approved by GE
Delineator fitted with ABS round body fitted with 2 Nos 50mm to 65mm dia highly reflective reflectors made out of PMMA and mounted on MS pipe of 50mm dia and minimum 700mm high duly powder coated , antirust and anti theft steel net includingnecessary fixing arrangements, grouted in 150x150x200mm PCC 1:2:4 type C2 block including excavation and earth work complete all as specified Make as approved by GE
Removing excavated material soils n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.
R B BUILDERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .