Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹1.8 LAccepted-AOC | ₹1.8 L Quoted ₹1.5 L | L-1 | Accepted-AOC The work is being awarded to the L-1 bidder, SANTOSH KUMAR, vide Reference No. SECL/GM/KSM/C/26-27/363 dated 02/08/2026. |
| 2 | L-2₹1.7 L+₹17,657.07 (11.9%)Rejected-Finance MAIN ROAD SURAKACHAR P O BHAIROTAL DISTT KORBA CHHATTISGARH 495454 | KORBA | KORBA | CHHATTISGARH | 495454 | ₹1.7 L+₹17,657.07 (11.9%) | L-2 | Rejected-Finance Rejected not being L-1 bidder. |
| 3 | L-3₹1.7 L+₹24,995.49 (16.8%)Rejected-Finance | ₹1.7 L+₹24,995.49 (16.8%) | L-3 | Rejected-Finance Rejected not being L-1 bidder. |
| 4 | L-4₹1.7 L+₹25,828.68 (17.3%)Rejected-Finance | ₹1.7 L+₹25,828.68 (17.3%) | L-4 | Rejected-Finance Rejected not being L-1 bidder. |
| 5 | L-5₹1.8 L+₹29,065.27 (19.5%)Rejected-Finance NEAR GAYATRI MANDIR ADARSH NAGAR KUSMUNDA KORBA CG 495454 | KORBA | CHHATTISGARH | 495454 | ₹1.8 L+₹29,065.27 (19.5%) | L-5 | Rejected-Finance Rejected not being L-1 bidder. |
Tender Value
₹3.8 L
EMD Value
₹4,800
Closing Date
20 Apr 2026, 5:00 pmClosed
Staff Officer (Civil), SECL KUSMUNDA AREA
OFFICE OF THE STAFF OFFICER (CIVIL), SECL KUSMUNDA AREA P.O. KUSMUNDA COLLIERY 495454 DISTT. KORBA (CG) CONTACT No. 8269842001
Repair and Maintenance, renovation of Sales Office at Area GM Office Campus of Kusmunda Area.
2026_SECL_358138_1
SECL/GM/KSM/CIVIL/e-Tender /26-27/03 dt 07/04/2026
Open Tender
Civil Works - Others
Percentage
30 days
KUSMUNDA AREA, SECL
AS PER NIT and TENDER DOCUMENT
3 documents required · 3 mandatory
₹4,800
3 Aug 2026
9 Apr 2026
21 Apr 2026
10 Apr 2026
20 Apr 2026
10 Apr 2026
10 Apr 2026 - 13 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Item Description / Heading | - | - | - | - |
| - | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) | - | sqm | - | - |
| - | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | - | sqm | - | - |
| - | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete: New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 pram/litre | - | sqm | - | - |
| - | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | - | kg | - | - |
| - | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work | - | sqm | - | - |
| - | Painting structural steel works Two or more coats with approved brand ready mixed paint as per instruction of the Engr.-In-Charge. | - | MT | - | - |
| - | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | - | sqm | - | - |
| - | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm | - | sqm | - | - |
| - | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm | - | sqm | - | - |
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_371058.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.35 MB
Tendernotice_2.pdf
PDF • 2.00 MB
Tendernotice_3.pdf
PDF • 0.60 MB
BOQ_371058.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .