SPECIAL REPAIR TO OUTER PERIMETER FENCING, BLDG NO TB-1F AND PROVN OF VARIOUS SANCTIONED WORKS UNDER AGE B/R-I OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A' PART-I (B/R WORKS)

Surface dressing n exc 15 cm deep in soft/ loose soil complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n. exc 1.5 m in depth for foundation, etc and getting out in soft / loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

Removing excavated material (soil) to a distance n. exc 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Removing excavated material (soil) to a distance exc 250m but n.exc 500 mtr and depositing where directed complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete, making good road/path etc complete all as specified and directed.

M&L Reinforced cement concrete 1:1.5:3 type A-1 using 20 mm graded crushed stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use & Waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), rough finished surface of concrete complete all as specified and directed.

All as per item No. 13.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.

M&L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&Lfor Fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4, type B-0 in louvres and jallies, 40mm thick (measured solid), including all mouldings but excluding frame (Pre cast frame shall be measured separately and paid) complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in surface channels and drains including formwork complete all as specified and directed.

M&L for 25mm thick sand coushioning, Spreading and Levelling complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 in two layer of 10mm, 05 mm each using WPC in finishing layer as per manufacturer's instructions on brick or concrete surfaces finished even & fair complete all as specified and directed. (Note;- WPC will be measured paid seperately as supply only).

M&L for Rendering 10 mm thick on other than fair faces of brick work or concrete surface in cement mortar (1:4) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for Rendering 10 mm thick on other than fair faces of brick work or concrete surface in cement mortar (1:6) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on stone other than fair faces of brick surfaces in CM 1:4 surface finished even and fair complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in lintel upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.

M&L 75 mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of flooring complete all as specified and directed.

M&L for coloured with grey cement and pigments Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade laid dry in floor/path complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) providing, precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts,boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, kerb stone etc.(of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match set in CM 1:6 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description and in any position complete all as specified and as directed

Dismantling of existing AC/armstrong sheet ceiling board complete all as specified and directed.

S&F for Hangers 6 mm dia G.I. (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 X 3 mm size 60 mm long complete all as specified and directed.

S&F Size of grid 605 X 605 mm Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed.

M&L for providing and fixing Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturer's instructions complete all as specified and directed.

S&F suspended false ceiling using anodised GI Exposed ceiling hanging by 4mm dia GI wire, frame with perimeter channel 0.55 mm thick having web of 27mm and flange of 30mm on the end and 20mm on other end and fixed to wall with the help of nylone sleeves including fixing Gypsum board 12mm thick in ceiling fixed with screw and GI frame and finished surface and finishing surface and finishing surface attachmet and finally board jointed and finished look with POP to have a flush look using jointed compound/tape painting etc complete all as specified and as directed.

M&L for cornice ceiling, designer beading of POP border as per design complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F roof trusses (farmed), trusses purlins, crane gantries, rails and fastenings and heavy bracket framing MS tubes medium grade as in truss, purlin, rafters, post etc fixed with and including angle cleat , MS plate etc including necessary welding, fittings etc Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed.

S&F 0.50 mm thick Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.4mm to 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

S&F 0.50 mm thick Pre-painted galvalume aluminium zinc coating GI plain sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete as specified and directed.

S&F 11 to 15 mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete as specified and directed.

Dismantling of floor, hearth or wall tiling / Paving Blocks including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc1.5 sqm complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc1.5 sqm but n exc 4 sqm each complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in natural ground and making good disturbed ground complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete and making good disturbed ground complete all as specified and directed.

Dismantling old barbed wire fencing fixed with ms wire all as specified and directed.

Demolition cement concrete (unreinforced) in ground floors and paving n. exc. 15 cm thick (above or below ground level) all as specified and directed.

Dismantling plain or corrugated AC sheeting, any gauge, thickness in roof coverings/ ridge all as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F pressed steel frame door 165 X 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F 2nd class HW glazed and skeleton 30 mm thick door/window shutters open rebated and prepared to receive glass, gauze etc with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sites of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (b) complete all as specified and directed.

S&F of 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel designed with 2mm thick moulded pre-laminated PVC sheet on the front face & 2mm plain colour PVC sheet on back face incl particle board core complete all as specified and directed.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 100 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F Floor door stopper 140mm long of brass body and tongue with hard drawn steel spring fixed in floorcomplete all as specified and directed.

S&F steel windows with side hung double shutters( one for glazed and other for mosquite proofing) including projection type hinghs with steel handle, and steel pag stay, complete with guard bars, dovetailed or welder complete all as specified and directed.

S&F for Steel ventilator with top hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F 4.00 mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 sq.m in each pane complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M&L for preparation of new surface of wall and three coat of white wash on walls complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil emulsion distemper of approved tint over one coat of 3 mm thick birla wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of oil emulsion distemper (OBD) of approved tint on wall over 1mm thick wall care putty complete all as specified and directed.

M&L for two coats of cement base paint on wall, soffits of chajjas, cornices etc including prepration of plastered/unplastered surfaces complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

M&L for pre polished coloured cement concrete chequred tile of approved quality size 300X300X 25mm thick on floors over and including 20 mm thick screed bed CM 1:6 set and jointed in neat cement slurry and pointed with colour to match th tiles complete all as specified and directed.

M&L for polished, machine cut, kota stone slab flooring 20-25mm thick over 20 mm thick cement screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including including rubbing and polishing complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set over 15mm thick screed in CM 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surfaces 300x450mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for vitrified tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.36 sqm, in floors etc. set over 15mm thick screed in cement mortar (1:6) and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

all as per iten No.81.00 here-in-before buton vertical surfaces complete all as specified and directed.

S&F 75mm PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trances or in floors complete all as specified and as directed.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified.

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified.

S&F in repairs 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.

S&F PVC connection 15mm bore with 2 nos PTMT nuts 45cm long fixed with all as directed.

S&F PVC waste pipe 32mm with waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed.

S&F CP brass shower rose 125 mm dia with or without swivel joints, including fixing to steel pipe or union complete all as specified.

S&F in repairs vitreous china wash hand basin flat back basin white size 510x410mm with counter sunk type including CP waste coupling 32mm bore, wase pipe 32mm bore, 750 long etc a pair of MS bracket and cutting for pinning in ends of brackets, waste chain & plug and porcelain stopper complete all as specified and directed.

S&F looking mirror 450X600mm with plywood backing and aluminium frame all as specified and directed.

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm dia bore complete all as specified and as directed.

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 25 mm dia bore complete all as specified and as directed.

S&F MS tubes, 'medium grade' ISI marked galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, 15mm bore complete all as specified and directed.

S&F MS tubes, 'medium grade' ISI marked galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, 20mm bore complete all as specified and directed.

S&F MS tubes, 'medium grade' ISI marked galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, 25mm bore complete all as specified and directed.

S&F MS tubes, 'medium grade' ISI marked galvanised, with all fitting and laid in trenches, 20mm bore complete all as specified and directed.

S&F MS tubes, 'medium grade' ISI marked galvanised, with all fitting and laid in trenches, 25mm bore complete all as specified and directed.

Dismantling water tanks 500 litre capacity and removing to store complete all as specified and as directed.

S&F rotational moulded polyethene water storage tank 500 ltrs capacity (cylindrical vertical with closed top) double-layered including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc including two coat of white silicon paint complete all as specified and as directed.

S&F Ball valves 20 mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) etc complete all as specified and directed.

S&F brass CP Angle stop cock fancy type, chromium plated, long body with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed,15 mm bore complete all as specified and directed.

S&F Bib taps, cast copper alloy, fancy type, chromium plated with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F stop valve, 20mm dia, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 20 mm Gun metal, globe or gate valves with iron wheel heads, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 25 mm Gun metal, globe or gate valves with iron wheel heads, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including modular moulding cutting and polishing types all as directed.

M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Cutting, chases, pinning in, block masonry wall for concealed water tubing and making good to facing and pointing in cement mortar 1:3, cutting n. exc. 10 cm girth all as specified and directed.

Cutting holes exc 100sq but not exc 250sq into or through cement concrete slabs, chajjas, etc. reinforced or otherwise complete all as specified and directed.

Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to FE-290 (Gde-E-165) all as specified and directed.

SCHEDULE 'A' PART-II (E/M WORKS)

Taking down of Old MCB DB / control box any type any size including MCBs and separating the serviceable MCB DBs and MCBs for reuse at site complete all as specified and directed.

Taking down carefully copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface of walls, floors etc as per existing specification complete all as specified and as directed.

M & L for concealed point wiring One light point or one fan/light/bell point controlled by one switch with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface complete all as specified and directed.

All as per item No 117.00 here-in-before but One 3 pin socket outlet, 5 Amp on independent board all as specified and directed.

All as per item No 117.00 here-in-before but One 3 pin socket outlet, 5 Amp on same board all as specified and directed.

All as per item No 117.00 here-in-before but for one 15 Amp 3 pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire complete all as specified and as directed.

S&F Switch piano, flush button type, single pole, one way 5 Amp complete all as specified and directed.

S&F socket outlet 5 pin 6 amp 2 in 1 complete all as specified and directed

S&F switch socket combination 2 in 1, 5 amp flush type complete all as specified and directed.

S&F switch socket combination 5 in 1, 5A/16A flush type complete all as specified and directed.

S&F electronic step type fan regulator delux rotary step type not less than 100 watt complete all as specified and directed.

S&F ceiling rose, 3 way PVC insulated body complete all as specified and as directed.

S&F LED tube light fitting 1x 18W, 230 V, with tube 4 feet wall mounted LED batten ultra bright LED with driver with very high efficency cool day /warm white light complete all as specified and as directed. (MODEL LCTL-18-CDL of Make Crompton or equivelent make Havells/ Bajjaj/ Philips)

S&F decorative CITY 1 wall light fixture made up of polycarbonate suitable for 10 wa led lamp (B22) incluing 10W LED bulb etc. including twin twisted copper conductor flexible wire from ceiling rose to connector complete all as specified and as directed. (Cat no. LHDL02160099 of Havells or equivelent Make : CG / SURYA PHILIPS)

S&F Sheet metal enclosure for MCB, DBs, phosphatised, power coated, double door single pole & Neutral 4 way with common bus bar at incoming end complete all as specified and directed.

S&F Sheet metal enclosure for MCB, DBs, phosphatised, power coated, double door single pole & Neutral 8 way with common bus bar at incoming end complete all as specified and directed.

S & F Building security LED light luminaire fitting 1X20 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1m long bent to shape including bolt, nut,washer,clam made out of MS flat of size 25X3 mm, 4 nos Anchor Bolt of suitable size etc all as specified and as directed. Make : CG MODEL LST 20 CDL/ SURYA MODEL SLE UL 20 W IP66 LXN.

S&F MCB single pole 6 to 32 Amps, breaking capacity 10KA, 240 Volts 'C' curve all as specified and directed.

S&F MCB double pole upto 32 Amps, breaking capacity 10KA, 240 Volts 'C' curve all as specified and directed.

M&L for Advance Maintenance Free G.I. SAFE EARTHING Electrode with PIPE of not less than 50 mm outer dia( THICKNESS NOT LESS THAN -2.5MM) and two meter length, The electrode should be of galvinised (80 -100 micron) along with earth lead as Galvanised steel strip of size 32 X6 mm 7.5 m. The GI Electrode shall be pre-filled with Cristaline Conductive Material (CCM). The GI electrode shall be surrounded with 25 kg BackFill compound to provide maximum contact between the electrode and Back Fill Compound. Backfill compound should be eco-frendly and having RoHs certification. GI Electrode Shall be tested from CPRI.The earting pit should be cover with PCC (1:2:4, type B-1) cover, of 450 x 450 mm complete all as specified and directed. (Make: ASHLOK / INDELEC / JMV / TERCEL).

Taking down fan, sealing cable end, dismantling blades and removing fan & blades, painting (white) with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust, marking same MES No. with permanent Marker etc and hanging the ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Taking down existing exhaust fan of any sweep, dismantling all parts, and proper cleaning & painting with synthetic enamel paint by spraying and refixing at same specified location with proper fixing arrangement & wall opening complete all as specified and directed.

S&F Ceiling Fan 5 star rating of Size 1200mm sweep, 230Volts AC with connection from existing ceiling rose including MS hook for hanging of sutable size complete all as specified and directed. (Make: Polar/Havells/ Bajaj)

S & F Modular Switch 1 way 6 A, 1 module complete all as specified and directed.

S & F Modular Switch 1 way 16 A, 1 module complete all as specified and directed.

S & F Modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Blank plate, 1 module complete all as specified and directed.

S & F Modular type white cover plate with frame , 3 module complete all as specified and directed.

S & F Modular type white cover plate with frame , 4 module complete all as specified and directed.

S & F Modular type Metal Flush box 3 module complete all as specified and directed.

S & F Modular type Metal Flush box 4 module complete all as specified and directed.

S & F LED spot light ideal for wardrobes, furniture lighting, display & illuminous complete set 06 Watt (round shape, cool day/Warm white) complete all as per Cat Part No LCSRR-6-CDL/TL/WW of make cromption of equivalent model of Philips/Bajaj/Surya

S & F LED Downloading round recessed flat panel with complete set Model : PERL cat part No LSCRM-12W-CDL/NW/WW make CROMPTION or equivalent model of Philips/Baja/Surya

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through PVC conduit complete all as specified and directed. Note :- (a) PVC Conduit / casing- caping shall be included in same rate. (b) For concealed sub-main wiring cutting chases will be measured & paid separately. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

(Note :The Scope of Work contained in 'Sch of Credit' amounting to Rs. 51105.50 (refer Tender Srl Page No 37). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

GURUNG CONSTRUCTION

Paritosh Saha

M/S UTTAM ENTERPRISES

M/S KAR CONSTRUCTION

MUKHERJEE ENTERPRISE