Drilling of 02 Nos Tubewells and Providing fixing of 02 Nos pumping machinery by Pvt R R Rig Method at village Bhulwana Palwal

Amount

Drilling of 609.60 mm dia bore by Rerverse rotary drilling (Reverse Circulation method) according to ISI specification No.2800-1991 (Part-1) as amended upto date and modified to extent of the specification attached with this schedule of items of work in all kinds of soils and boulders upto 125mm dia except rocky strata including the cost of all consumable stores, fuel oils, soil, stabilizing material and transportation of rig and other accessories to the site of proposed bore and back, complete to the satisfaction of the Engineer-in-Charge with Contractor Pvt. Rig.Machine.2x60=120

Providing fixing of 200mm i/d 6.4 mm thick plain ended Electric Resistance Welded (ERW) M.S. Pipes as per IS marked 4270:2001 BIS 2001 (Length of pipe 4 to 7 mtr.) 2x45=90

Providing Fixing for lowering 200mm i/d all welded S.S.screen conforming to ISI 8110-2000, and thickness 8mm, slot opening 0.75mm/0.50mm 2x15=30

Providing & fixing of M.S. bail plug end cap.

Providing & fixing of Center Guides. (i) 200mm ø (2x 3 = 6 Nos.)

Providing & fixingof M.S. cap 200mm ø.

Supplying & packing of Pea Gravel (A-Grade) for use as pack in tubewells size of over 2.00mm to 3.35mm with uniformity coefficient Not to exceed 2.00. The Gravel should be confirming To requirement of ISI, 4097-1967 regarding its physical Characteristic quarry at Panchkula/Chandi Mandir. 2x20=40

Provision for resistivity servy of the area

Providing & Fixing 8" MS Clamp for supporting 219.10 mm housing pipe with sutable giders complete in all respect.2x1=2nos

Providing & Fixing of Safety MS Grider for tubewell

Development of tubewell with Air Compressor having capacity 250 PSI 450 CFM according to clause 9.3 of IS: 2800 - 1991 (Part-I) as amended upto date and specifications attached and as directed by the Engineer-in-Charge of the work including the cost of all consumable stores, fuel, oil, compressors and machinery etc. as required for this work. Developed by Air Compressor of 250 PSI 450 CFM. (2 x 10 = 20 Hrs.)

Providing and testing Electric logging of Tubewell

Supplying, erection testing and commissioning of submersible pumping sets as per BIS SPECIFICATION No. 8034 - 1989 (as amended up to date for pumps ) and IS 9283 – 1979 (as amended up to date for motor ) the pump motor sets should be capable of pumping clear fresh cold water having characteristics as specified in Clause – 4 of IS 8034 – 1989 and clause 4.1 of IS 9283 – 1979 .400 LPM /60 M Head 10.00 BHP Each Make , KSB , Texmo, CRI, Kirloskar

Supplying erection, testing of fully automatic Electric Control Panel Board for tubewells in pump chamber consisting of MS sheet of thickness 14 gauge duly painted box type floor mounted made of Angle Frame containing 1 No. fully automatic air brake starter suitable for 25 HP motor, Main switch of suitable range with HRC fuse, 1 No. Volt Meter (0 to 500 Volts), 1 No. Amp. Meter of 0 to 100 Amp. 3 Sets of indicating lamp Capacitor of suitable capacity and 1 No. single phase preventers with the timers switch including wiring in panel board and suitable electric energy meter wiring in Electric Control Panel Board complete in all respect as per specification given in Schedule No.II. (Make L&T, BCH, , Havells).

Prov. and fixng M.S. Clamp

Supplying and fixing following C.I.D/F pipe, CI Specials, sluice valves with wheel, non return valves with G.M. Flap including cost of jointing materials, excavation, laying refilling including making adequate supports of masonry/concrete/ steel for delivery pipe from Submersible Pump Set upto 1.5 mtr. outside the outer wall of pump chamber as per plan shown as per specification given in schedule Noil.A)Detail of pipes and specials a)CI D/F bends, reducers, tapers, tees, tail piece, blank flange etc. upto 200mm i/d.

Providing, and fixing D plate/Bore Cap of size 300mm. with nut & bolt complete.

Providing and fixing G.I Pipe 2" B Class (Delivery Pipe) 2x5=10

Providing and fixing service cable 25 sqmm 4 core aluminum 2x70=140

Bidder Name

Amount

The Krinki Kherli Co.OP L and C Society(GSTN-06AABAT4631N1ZA)

Liyakat Ali, Contractor(GSTN-NA)

Liyakat Ali, Contractor

Liyakat Ali, Contractor