PROVN OF DEFICIENT OFFICE ACCOMMODATION FOR STORE STAFF AT NAD TROMBAY, ADDN/ALTN AND SPL REPAIRS TO BLDG NO P-28 (INDUSTRIAL CANTEEN) AND BLDG NO P-42 (UNIT RUN CANTEEN) AT NAD TROMBAY UNDER GE (NW) MANKHURD

Amount

SCH 'A' PART-I : BLDG WORKS" Total of Schedule 'A' Part-I brought forwarded from Serial Page No. 18 (R)

SCH 'A' PART-II "EXCAVATION AND EARTH WORK " Total of Schedule 'A' Part-II brought forwarded from Serial Page No. 19 (R)

SCH 'A' PART-III "INTERNAL WATER SUPPLY" Total of Schedule 'A' Part-III brought forwarded from Serial Page No. 21 (R), Ser page No 21 blank.

SCH 'A' PART-IV "INTERNAL ELECTRIFICATION" Total of Schedule 'A' Part-IV brought forwarded from Serial Page No. 22 to 23

SCH 'A' PART-V "EXTERNAL WATER SUPPLY" Total of Schedule 'A' Part-V brought forwarded from Serial Page No. 24 (R)

SCH 'A' PART-VI "EXTERNAL ELECTRIFICATION" Total of Schedule 'A' Part-VI brought forwarded from Serial Page No. 25

SCH 'A' PART-VII "SEWAGE DISPOSAL" Total of Schedule 'A' Part-VII brought forwarded from Serial Page No. 26 (R) to 27 (R)

SCH 'A' PART-VIII "PATH/HARD STANDING" Total of Schedule 'A' Part-VIII brought forwarded from Serial Page No. 28 (R)

SCH 'A' PART-IX "AREA DRAINAGE" Total of Schedule 'A' Part-III brought forwarded from Serial Page No. 29 (R)

SCH 'A' PART-X "MISC ITEMS"

M & L for cutting existing road/hard standing not exc 45x45 cm in wide & depth getting out excavated material for laying cable/ CI/GI tube, returing filling & well rammaing watering finish surface 10 cm from top using PCC 1:3:6 type C2 including removal of surplus soil all as directed.

M&L for cutting / boring of PCC/hard standing at a depth not more than 15 cm deep and 15 cm in breadth for passing earthing conductor and making good the disturbed surfaces with PCC (1:2:4) type B-0 or cement mortar (1:3) complete all as specified.

M&L for MCB SP, 240 volt, 6 to 32 Amps, 10 KA, C Curve,

M&L for MCB SPN, 240 volt, 32 to 40 Amps, 10 KA, C Curve,

S&F Ultra bright glass LED tube rod 20 Watts, 230 volts with very high efficacy with G13 lamp holder including fixing arrangements complete. Make : Havells Cat No. CRYSTAL 1213T8DSTL20WLED865SGLASS /Crompton/Bajaj/ Philips

S&F Surface and wall mounted batten suitable for LED tube 22 watts, 230 volts, including fixing mounting blocks 2 Nos, 1.5 sqmm 3 core Pvc insulated copper conductor cable including fixing arrangements complete . The fitting shall conform to Cat No. REGALBATTENT8UPTO1X22WDSBSWH of Havells/Crompton/Bajaj/ Philips

Supply and fix in replacement street light fittings in street light poles/Buildings the fitting shall be of LED type 60 Watts complete with and including drivers, pressure die cast aluminium housing, prewired complete. The fitting shalll conform to cat No -ENDURAPEARLPLUSSL60WLED757SASYTOPC of Havells /Crompton/Bajaj/ Philips

Supply & fix fans ceiling without regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated complete.

S&F heavy duty exhaust fans AC single phase 230/ 240 V of size 300 mm sweep 900 RPM with louvers & shutters.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, in any position in framed work In ceiling complete all as specified and directed.

Supply and fixing hot dipped GI imposed grid with 24mm wide T sect exposed flanges powder coated frame work comprising of main runner made from 0.33 mm thick gs sheet of size 24mmx32mmx3000 mm @1200 mm C/C GI wire 4mm dia fixed by rawl plug, level adjusters and screws etc flush fitting of 1200mm long cross tee interlocked between main runners @ 600mm c/c to form 1200mmx600mm modules cross tee longer than 600 mm to be supported independently 600mmx600mm modules shall be formed by fitting 600mm long cross tee centrally between 1200mm cross tee ,perimeter wall angle shall be GS of size 19mmx19mm and 0.45 mm thick 300mm long including 600mmx600mmx8 to 10mm thick Armstrong gypsum reinforced board complete all as specified

Demolition of brick work or stone/boulder, masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but exceeding ashlar facing and pre-cast concrete articles complete all as specified and as directed

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6)

Taking down cement or cement lime plaster of any description on brick or stone walls, including raking out joints, hacking for keys, scrubbing down with water, etc. including all necessary scaffolding as required and taking off rubbish outside Mud land, etc. complete all as specified and as directed.

M&L for 10mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing the surfaces even and smooth, complete all as specified and directed, Note : The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to included for provision of dubbing of the surfaces with the ready mix plaster and nothing extra shall be payable on this account.

M&L for 3 mm thick (minimum) white cement based wall care putty in two coats on new or old surfaces of walls etc finished even and smooth, complete all as specified and directed.

M&L for preparation of surface of wall and applying two coat of distemper oil-emulsion, of white or tinted over one coat of alkali resistant primer complete all as specified and directed.

M & L for Coloured Glazed ceramic tiles in vertical surface 350 x 250 mm x 7 mm / 450 x350x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick in CM (1:4) as in backing coat complete all as specified and directed.

Dismantling of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors , aprons etc

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L Vitrified ceramic tiles 10mm thick (square/rectangular), digital shade, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L 20 mm thick Screed bed or bedding layer or mortar layer of mortar for laying floor finishes in CM 1:6 complete all as specified and directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc., to store and rubbish not exc. 50m built in cement mortar complete all as specified and directed.

Forming jambs, etc., to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete new work built in CM 1:4 complete all as specified and directed.

Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.

All as per serial Item No 37 herein above but exceeding 1.5 Square Metre and not exceeding 04 Square Metre each complete all as specified and as directed.

S & F aluminium frame and shutters for doors, windows, ventilators , Partitions etc with powder coating (minimum thickness of powder coating 50 micron), with one or more rebates including fixing glass/ gauge joining all fittings, cleats, handles, door stopper, locking arrangement and arrangement to receive glass/ wire mesh with beading, glazing cleats, rubber gasket etc complete. Note : Weight of fittings & fixtures shall not be considered separately while measuring weight of shutter/ frame. Rate quoted shall be deemed to be inclusive of the same (Note : Glass/ wire guage shall be measured and paid separately)

M & L for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice laminations, fixed with screws to timber frame work complete all as specified and as directed.

M & L for Machine cut cudappah stone slab flooring 20-25mm thick over and including 20 mm thick in CM (1:6) screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as in cills, jambs, cooking platform etc complete all as specified and as directed.

M&L Granite (of any type) Tiles 20mm thick in floor machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 20mm thick CM 1:6 screed bed for laying floor finishes and cutting and polishing complete all as specified and as directed.

S&F in repairs Vitreous China, Ist quality, white, wash hand basin, flat back, size 550mm x 400mm including mild steel angle brackets,CP brass fittings, waste, union, 32 mm dia PVC waste pipe, cutting for and pinning ends of brackets, complete all as specified and directed. Note : Pillar tap/ mixer will be measured and paid separately under respective item.

S & F in repairs flushing cistern, 10 Ltrs. Capacity, PVC valveless, syphonic action type, low level, white with inlet, ball valve,float and handle including brackets, flush pipe of polyethylene of low or high density or PVC, 32mm dia, complete all as specified and directed.

S & F Vitreous China urinals, half staff urinal, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S& F mirror 600 mm x 450mm, 6mm thick bevelled edged first quality, including PVC frame and back and fixed complete all as specified and as directed.

S& F in repairs aluminium anodised curtain rod 20 mm dia complete all as specified and directed.

S&F in repairs aluminium anodised brackets decorative brackets for 20mm dia curtain rod, complete all as specified and directed.

S & F for aluminium (Die cast body) hydraulically Door closer regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg. complete all as specified and directed.

M&L PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in hold fast, bed plate, coping etc including necessary form work complete all as specified and as directed.

S&F Mild steel work as in band, straps, supports for RWP, clamps, hold fasts, wall ties, hooks & pintle hinges and similar small articles conforming to Fe-290-0 or Gde E-165 complete all as specified and directed.

M&L for Preparing surface of wood and wood based materials, steel and iron work, new or old, treating ends of posts, coal tar black paint on back of chowkats area exc 0.10 Sqm but not exc 0.5 Sqm each complete all as specified.

M&L for treating with tar or coal tar black paint on back of chowkats, ends of posts, holdfasts etc. area not exc 0.1 Sqm each complete all as specified.

M & L for Sanding newly tarred or painted surface with clean sharp sand (Hold Fast) complete all as specified and directed.

Supply & Fixing 2nd class hard wood plain ,solid straight chowkats and frames of wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F for 35 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides and fitted to chowkhats complete all as specified and as directed.

S&F 100 mm size stainless steel butt hinges medium weight fixed with stainless screw complete all as specified and directed.

S&F aluminum anodised barrel tower bolts of extruded section of size 150 mm length complete all as specified and directed.

S&F Aluminium handle, cast type anodized size of handle 150 mm complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 250 mm complete all as specified and as directed.

S&F Floor door stopper of Aluminium alloy body and tongue, overall length of cover plate 140 mm , anodized, with hard drawn steel spring , fixed to shutters complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store

Taking down existing aluminium joinery of any description (frame/ shutters) with all fittings (but excluding grills) complete all as specified and directed.

Supplying and laying of 25 mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

All as per item No 65 above but 20 mm dia pipe

S & F Brass CP Tubular towel rail 20mm dia, D type, 60cm long between flanges fixed as in repairs

S&F PVC connections 15mm size of length 600 m with PTMT nuts complete all as specified and directed.

S&F Brass CP hand shower (health Faucet) with 8 mm dia 1 mtr Long flexible tube & wall hook complete all as specified and directed.

S&F 15 mm dia bib taps, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated.

S&F 15 mm dia Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed fancy type chromium plated.

S&F 15mm dia of chromium plated Angle valves, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for and fixed

S&F 15mm dia of chromium plated Push Cock for urinals, cast copper alloy, screwed down, screwed for iron pipe or for and fixed

Taking down push pull type rolling shutters, area of rolling shutter n.exc 10Sqm each complete all as specified and directed

M&L for precast cement concrete block masonry with solid block of grade (C-5) having block density not less than 1800 Kg/cum, exc. 10cm in width and setting in CM 1:6, complete all as specified and directed.

M & L Providing precast cement concrete solid building blocks or slabs 10cm thick type C1 (1:3:6) using 20 mm graded aggregate (with plain or interlocking joints as directed) setting in mortar 1:4, complete, in walls

S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing complete all as specified and directed.

M&L factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & bottom rail in either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the staple & raib with suitable PVC sheet beading and joined together with solvent cement sapling & fixing in the frame at site and all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section lengths of bolts 100 mm complete all as specified and all as directed.

S&F 100mm size aluminium handle, cast type, anodized and all as specified and directed.

S & F MS Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and all as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for as in roof padding including taking out old waterproofing materialcomplete all as specified and directed.

M&L for PCC (1:2:4) type B-0, using 12.5mm graded stone aggregate as in levelling course over RCC roof/ terrace surfaces to achieve required slope, benching etc including making rounded or chamfered on edges mixed with WPC as per manufacturer's instructions, complete all as specified and directed. Note : WPC shall be measured and paid separately as "supply only".

M & L for 10mm thick plaster in cement and sand mortar (1:3) finished even and smooth without using extra cement mixed with WPC over roof/ terrace surfaces, complete all as specified and directed, Note: WPC shall be measured and paid separately as "supply only".

Supply only integral water proofing compound (ISI Marked )

M & L for APP modified roof treatment over existing roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications complete all as specified and directed:- (a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying APP modified water proofing membrane reinforced with non woven polyester fibre weight not less than 160gm/Sqcm using butane torch by torch application with 10cm side lap and 15cm end lap. (c) Over the membrane provide a finishing with solar reflective bitumen aluminium paint @ 0.10 Kg/Sqm as prescibed by manufacturer. (d) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.50 Kg/Sqm. (ii) Non woven polyester weight not less than 160gm /sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/Sqcm (v) Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi) Elongation : > 20% in both directions. (vii) Impermeability/water tightness at 2 Kgf/cm2. (viii) Water absorption - Not more than 1% on mass within 24 hours. (ix) Cold flexibility - Minimum (-) 20C. (x) Dimentional stability % change = Maximum 1%.

S&F Vitreous china wash down water closet pan “Pedestal Pattern” coloured with wc seat cover coloured closed pattern with flat bottom and mild steel chromium plated or aluminized hinging device including pvc flush pipe and joints etc and connection to drain, flushing, pipe, anti- syphonage pipe, and fixing arrangements with fixing bolts etc ,complete all as specified and directed

S & F Wash basins, vitreous China (flat back or angle back type) size 580 x 450 mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipeVitreous china wash basin, white, flat back,

S & F 75 mm dia outlet PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S & F PVC valveless, syphonic action type flushing cistern of 10 Ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets

S&F Brass CP two way Bib cock 15 mm bore, with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule fancy type complete all as spewcified and directed.

S&F pillar taps 15 mm bore of cast copper alloy with capstan; head chromium plated screwed downend with pressure with or without lettered hot or cold with long screwed shank and fly nuts, screwed for iron pipe& fixed complete all as specified

S & F 500 litre Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including taking down old tank complete all as specified and directed.

S & F Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

M&L for leakage / seepage proof coating consisting of preparing the new surfaces of existing exterior walls, parapet walls, chajjas, soffit of beams, columns etc. and applying Primeseal primer of M/s Dr Fixit or equivalent chemical of M/s STP Ltd as approved by the GE or one coat of Chemstic PDE 600 elastomeric coating (and allowing to dry for 8hrs) under torch dry condition and subsequently applying two coats of water proofing decorative elastomeric coating system Raincoat of M/s Dr Fixit with DFT 100microns or Shalicryl 215 of M/s STP Ltd or Chemstic PDE 600 elastomeric coating (the surfaces after painting one coat shall be allowed to dry for 6 to 8hours before application of next coat) including necessary scaffolding etc complete all as per manufacturer instructions and all as specified & directed. Notes. The aforesaid treatment shall be got executed by the contractor from the authorised applicator of the manufacturer(s) and also necessary authenticated documents on account of above shall be submitted by the contractor to the GE.

M & L RCC M-30 (Design Mix) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mer, lintels, cantilevers, shelves incl supports overhangs, etc also splays between floors and Beams complete all as specified and directed.

S&F rolled sections as in brackets for resting of chajjas and similar work, conforming to Fe 410 -W (Gde-E-250, quality `B') and including all relevant works, complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating (55% aluminium + 43.5% Zinc+ 1.5% Silicon) GI based corrugated steel sheets as in roofing/wall cladding, 0.50mm thick (total coated thickness) of colour as directed by GE, conforming to AS-1397/ASTM A-792 and having tensile strength minimum 550 Mpa fixed with and including hot dip galvanised, self drilling and self tapping screws neoprene and EPDM washers as per manufacturer's instructions, complete all as specified and directed.

M&L for providing TMT bars any dia in various structural RCC elements like columns, beams, Slabs etc. including cutting, bending, fixing of bars with welding/ tying as required at site with & including binding wires etc. and all relevant works like anchoring of the bars in the existing RCC Members, complete all as specified and directed.

S & F aluminium anodised grill DG-104, 10 mm dia of extruded aluminium section of suitable size and frame including fixing with U clip or F section beading complete with all fitting and fixture and drilling required in RCC section in rectangular or arch type balcony opening of the building complete all as specified.

M & L Excavating in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in any type of soil.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M & L plain cement concrete Type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete of Manholes complete all as specified and directed.

M & L laying of RCC NP3 150 mm dia pipes laid and jointed complete with collars complete all as specified and directed.

M & L plain plain concrete bed using cement concrete 1:4:8 type D-2 to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in 150 mm dia pipes

M & L for rendering 15mm thick cement plaster in CM 1:3 on fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement all as specified.

M & L for providing precast cement concrete type A1 1:1.5:3 (using 20mm graded stone aggregate) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:6

M & L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to

M & L providing PCC 1 : 2 : 4 Type B-1 using 20 mm graded stone aggregate as in surface channel and drains (for benching inside manhole)

Extra for forming fair finished drain or channel 30 Cm inner girth in cement concrete, using extra cement, including forms, moulds, mi-tred/stopped ends etc. (Inner girth shall be measured only).

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required

Taking down carefully point wiring of any type & pattern (Light/Fan/Socket or power) including fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings of any type etc and making good disturbed surfaces of walls/ roof etc, complete all as specified and directed.

Taking down complete main switches/DBs with enclosure and its components of any size and capacity etc, complete all as specified and directed.

Taking down submain wiring any size complete all as specified and directed.

Refixing/Hanging ceiling fan/Exhaust fan, ceiling cable and dismantling blades and shifting to MES store yard during other repair work and its original location including supply and fixing 1.5 sqmm FRLS 3 core flexible multistranded copper conductor cable, 1100V grade from ceiling rose and providing hanging accessories such as rubber reel, cotterpin, nut and bolt including spray painting with 2 coats of synthetic enamel paint servicing and testing for smooth functioning of fan, complete all as specified and directed.

M & L for point wiring complete with proper colour coding, using 1100 Volts grade, 1.5 Sqmm, PVC insulated FRLS, unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked drawn partly in and including PVC casing caping (minimum 25mm width) fixed on the surfaces of ceiling etc and partly through PVC conduit (minimum 20mm dia) concealed in wall (also including cutting chases in wall and making good the same in CM 1:3 to match with the adjoining surfaces) with all accessories, fittings, PVC junction boxes etc, sunk pressed steel boxes not less than 2 mm thick, 50 mm deep terminal boxes suitable for cover modular plate, also including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for one light point /fan/bell point controlled by one one way switch, complete all as specified and directed. Note : Switches and sockets shall be measured and paid for separately.

M&L for point wiring using proper colour coding with 1100 Volts grade, 2.5 Sqmm PVC insulated, FRLS, unsheathed, wire confirming to IS-694, Part-II, ISI marked with multistranded copper conductor drawn partly in and including PVC casing caping (minimum 25 mm in width) fixed on the surfaces of ceiling etc and partly through PVC conduit (minimum 20mm dia) concealed in wall (also including cutting chases in wall and making good the same in CM 1:3 to match with the adjoining surfaces) with all accessories, fittings, PVC junction boxes etc, sunk pressed steel terminal box not less than 2 mm thick, 50 mm deep, sutable for cover modular plate covered with 3 mm thick plastic laminated sheet top cover fastened with chromium plated brass screws, also including 2.5 Sqmm, PVC insulated, FRLS, unsheathed, multistranded, copper conductor 1100 Volts grade, green color, continuous earth wire connected to common earth dolly for 15 Amps, 3 Pin, socket outlet independent, complete all as specified and directed. Note : Switches and sockets shall be measured and paid for separately.

All as per item No 119 above but one three pin switch socket 5 Amps out let on independent board

S&F in repairs decorative recessed type LED light fitting 36 Watt (size '2x2') including driver, including provision of 3 core flexible copper cable 1.5 sqmm conductor wire for connecting from ceiling rose to connector, including making addition/altn to existing false ceiling shets aluminium frames including fixing arrangement complete all as specified and directed conforming to CAT No LCTLRNE-36-FO-CDL of crompton or equivalent of Philips/ Havells.

Supply and fix 1X10 watt LED tube light fitting (including LED), 230 Volt indoor decorative channel housing Surface/wall mounting, with in built electronic control gear , bipin holders, connector block etc complete with all accessories internally pre wired and including connecting lead, three core 1.5 Sqmm, FRLS flexible copper multistranded conductor cable from ceiling rose to tube light fitting complete all as specified and directed.

S&F ceiling rose, three terminal, 230 Volts, PVC / Polycarbonate body, complete all as specified and directed.

M&L One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sqmm size conforming to IS: 1293-2005 complete all as specified and directed.

Supply and fix switch socket combination 2 in 1, 5 Amp flush type complete all as specified and directed.

Supply and fix switch socket combination multipurpose 3 pin 16 Amp flush type complete all as specified and directed.

Supply and fixing earthed metal clad socket outlet with earthed plug top 20 Amp capacity , sheet metal enclosed and one 20 Amp MCB SP all as specified and diredted.

S&F Switch piano, flush type single pole, one way 5 Amp confirming to IS: 3854-1997 with fingure proof terminal complete all as specified and directed.

Supply and fixing ceiling fan regulator rotary step type 230V, all as specified and directed.

S & F MCB DB, 8 way, SPN, Single door, 240 Volts, and including cutting chases in wall, concealing DB in wall, making good the disturbed surfaces and making all connections, for the under mentioned storeys of the existing buildings, complete all as specified and directed. Note: Quoted rate shall be deemed to include for provision of copper bus bar of 200 Amps rating.

S & F MCB DB, 4 way, SPN, Single door, 240 Volts, and including cutting chases in wall, concealing DB in wall, making good the disturbed surfaces and making all connections, for the under mentioned storeys of the existing buildings, complete all as specified and directed. Note: Quoted rate shall be deemed to include for provision of copper bus bar of 200 Amps rating.

S & F MCB DB, 2 way, SPN, Single door, 240 Volts, and including cutting chases in wall, concealing DB in wall, making good the disturbed surfaces and making all connections, for the under mentioned storeys of the existing buildings, complete all as specified and directed. Note: Quoted rate shall be deemed to include for provision of copper bus bar of 200 Amps rating.

S & F MCB DB, 4 way, TPN, Single door, 240 Volts, and including cutting chases in wall, concealing DB in wall, making good the disturbed surfaces and making all connections, for the under mentioned storeys of the existing buildings, complete all as specified and directed. Note: Quoted rate shall be deemed to include for provision of copper bus bar of 200 Amps rating.

Supply and fix in repairs of MCB SP 240 Volts 6 to 32 Amps breaking capacity 10 KA rating complete all as specified and directed.

Supply and fix in repairs of MCB SPN 240 Volts 6 to 32 Amps breaking capacity 10 KA rating complete all as specified and directed.

Supply and fix of MCB TPN 415 Volts 40 Amps breaking capacity 25 KA rating complete all as specified and directed.

M & L in repairs for sub main wiring with Two runs of 2.5 Sqmm PVC insulated, unsheathed, heavy duty, 1100 volt grade multi-stranded copper conductor cable (FRLS), drawn in and including PVC casing caping fixed on the surfaces of walls, RCC slab/ ceiling/columns / beams etc with all accessories, fittings, PVC junction boxes etc, also including one run of 2.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multi-stranded copper conductor green colour as continuous earth wire connected to common earth dolly and mains, complete all as specified and directed. Note: Three runs of 2.5 Sqmm PVC cable and one run of PVC Casing Caping will be measured as 'one unit' length.

M & L in repairs for sub main wiring with two runs of 4.0 Sqmm PVC insulated, unsheathed, heavy duty, 1100 volt grade multi-stranded copper conductor cable (FRLS), drawn in and including PVC casing caping fixed on the surfaces of walls, RCC slab/ ceiling/columns / beams etc with all accessories, fittings, PVC junction boxes etc, also including one run of 4.0 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multi-stranded copper conductor green colour as continuous earth wire connected to common earth dolly and mains, complete all as specified and directed. Note: Three runs of 4.0 Sqmm PVC cable and one run of PVC Casing Caping will be measured as 'one unit' length.

M & L Earthing complete with galvanised steel earth electrode 60Cm x 60Cm x 6 mm thick directly burried in ground ( eath pit not less than 2.25 M deep below the normal ground level conneceted to galvanised earth lead wire 4 mm dia by mens of bolts, nuts, check nuts and washers of galvanised iron steel including necessery excavation earth work PCC chamber CI chamber cover protection pipe watering pipe etc. complete all as shown in electrical plate No 3 and conected to earthing test point complete including excavation earthwork, PCC chamber, chamber cover ,funnel watering and protection pipe etc all specified and directed.

Taking down of earthed metal clad socket outlet with earthed plug top 20 Amp capacity, sheet metal enclosed and one 20 Amp MCB SPN.

Supply and fix MCB SPN 240 Volts 6 to 32 Amps breaking capacity 10 KA rating complete all as specified and directed.

M/s Hari Om Construction

bajaranga enterprises

Joy builders

A G ENTERPRISES

AAGAMENTERPRISES

Vishal Builders

Garima Construction Co