PROVN OF CTL HAVING SEATING CAPACITY OF 100 AGNIVEERS AT BIHAR RC DANAPUR CANTT

Amount

Boring holes 5m deep and 300 mm dia of pile in soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50 m complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Excavation over area n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.

M & L for Hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed.

M & L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of the surface area complete all as specified and directed.

M & L for Treating the soil along with external perimeter of building at the rate of 2.25 litres of emulsion per metre of the perimeter wall complete all as specified and directed.

M&L PCC 1:4:8 type-D2 (40mm graded stone aggregate) as in foundations, filling and mass concrete sub base as in floors finished even & fair complete all as specified and directed.

M&L for 10mm thick Light shade vitrified ceramic tiles in floors, exceeding 0.36 sqm but not exceeding 0.42 sqm over and including 15mm thick screed bed in cement mortor 1:6 set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified & directed.

M & L for 450x300 x7 mm thick glazed coloured ceramic tiles as in dado/ skirting and vertical serfaces set&jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick rendering cement mortar 1:4 to for laying etc of tiles complete all as specified and directed.

M & L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M & L for reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in columns, pillars, piers, posps and struts complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete M-20 Design Mix using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete M-20 Design Mix using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m sapn and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

Use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

Form work to edges of concrete flats, treads, breaks in floors window cills, concrete railing, openings in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls, horizontal or sloping and similar work complete all as specified.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 6 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:- Liquid WPC will be measured and paid separately.

M & L for Rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:4 on concrete surfaces/ chajja/ ceiling, etc finished even and smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound (liquid), ISI marked.

S & F of 150 mm size (Overall length of cover plate) floor door stopper of aluminium and tongue, with hard drawn steel spring complete all as specified and directed.

S & F for powder coated aluminium door fame with shutter made out of following section complete fixed to position with hold fast all as specified & directed (a) chowkhat frame of size 81.25 x 38.10 x1.25 mm @ 0.781Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667 Kg/RM (c) Top and bottom rail of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (d) Bottom rail of size 100x 44.45x 1.18 mm @ 1.69 Kg /RM (e) Top panel with 5.00 mm thick tinted glass fixing with rubber gasket. (f) Bottom panel with 6 mm thick Aluminium composite panel (ACP) with glazing clips (g) 100 mm dia round handle disc type -02 nos & Aluminium tower bolt 200mm - 01 No (h) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc

S & F powder coated aluminium window/ventilator sliding shutter three track with following specification:- (a) chowkhat frame of size 81.25 x 38.10 x1.25 mm @ 0.781Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (c) Top and bottom rail of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment. (e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket. (f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc

S&F anodized aluminium grill (diamond shape of approx size 100x100mm) made out of aluminium flat of size 4x5mm as approved by Engr-in-Charge/GE for window/ ventilators etc complete all as specified & directed.

S & F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165. complete all as specified and directed.

S&F mild steel conduit curtain rod with PVC coating fancy type drapery rod 20mm dia of any clour as approved and fixed with bracket complete all as specified and directed

M&L for preparation of newly plastered surface and applying two coats of oil bound distemper over a caot of primer including 3mm thick Birla/JK wall Putty complete all as specified and directed.

M & L Preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L Preparing new plastered surfaces of ceiling and applying three coats of white wash etc complete all as specified and directed.

M & L preparation of new steel surfaces any description, not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

M&L 75 mm thick Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base finished even & fair complete all as specified and directed.

M&L PCC interlocking paver block 60 mm thick (ISI marked) M-35 Grade mixed with grey cement and pigment, laid dry and bedded on sand cushion complete all as specified and as directed by Engr-in-Charge. Note : The pattern of paver block as approved by GE (approved make). (Note : Payment of sand cushion will be paid separately)

M&L for 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in floor/plinth protection laid in suitable panels finished even and fair all as spd . 6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand ( all by weight) complete.

M&L for 15 mm thick screed bed in CM 1:4 with water proofing compound @ 200ml /50kg of cement as per manufacturer's instruction finished surface even and smooth with out using extra cement complete all as specified. (Note : WPC will be measured & paid for separately).

M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coat surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying a coat of aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. NOTE:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed.

M & L for Point wiring with PVC insulated and PVC unsheathed electric FRLS cable of 1100V single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including 1.6mm thick anodised pressed steel sunken box covered with 3mm thick hylum sheet for mounting switches, sockets, fan regulators etc for one light/fan point controlled by one switch complete all as specified and directed.

All as per item no 44 above but one 5 Amps socket out let point controlled by one switch on same board with other switches.

All as per item no 44 above but one 5 Amps socket out let point on independent board controlled by one switch.

All as per item no 44 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board. Make of cable: Polycab/Havell's/Finolex and Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG.

Supply and fixing switch piano flush button single pole one way 5 amps, 240 Volts complete all as specified and directed.

Supply and fixing socket outlet flush type 5 Amps, 5 pin, 240 Volts complete all as specified and directed.

Supply and fixing switch piano flush button single pole one way 15 Amp 240 volt complete all as specified and directed.

Supply and fixing socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 240 volts complete all as specified and directed.

Supply and fixing Ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

Supply and fixing for batten/angular fittings complete all as specified and directed.

Supply and fixing for electronic Fan regulator 450 watt step type complete all as specified and directed.

Supply and fixing double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed . Make: LEGRAND/ L&T/ SCHNEIDER/ABB

Supply and fixing with MCB SPN 5 to 40 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed . Make: LEGRAND/ L&T/ SCHNEIDER/ABB

Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete all as specified and directed .Make: LEGRAND/ L&T/ SCHNEIDER/ABB

Supply and fixing LED tube light batten box type suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder with single tube rod of 18/20 watt and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting up with twin core twisted flexible copper conductor cable upto ceiling rose/connetor suitable size all as specified. Make- Havells/Bajaj/Philips/Crompton/Surya.

Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with electronic driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and as directed. Make: Havells/ CG/ Bajaj/Surya.

Supply, fixing and testing of ceiling fan 1200 mm sweep, heavy duty, single phase, AC, 230 Volts, 50Hz, BEE 5 star rating, ISI marked complete with down rod, canopy, blades, BLDC motor etc and connecting up complete including complete connection from ceiling rose to fan including writing of MES Number with synthetic enamel paint complete all as specified and as directed. Make- Bajaj/Usha/ Crompton Greaves/Havell's.

Supply and fixing LED light fitting for bldg security lighting energy saving & environmental friendly long life versatile pressure die-cast housing with individual high power LED as light source and lens embedded PC cover of capacity 25 watt 240 volts AC 50 Hz , IK 07 and IP 66 protection suitable for 40/25 mm dia GI pipe bracket including three years on site warranty from manufacturer complete all as specified and directed. Make: Havells Cat No: ENDURAPEARLSL25WLED757SASYTOPCMP /Bajaj, / Crompton Greaves,

M & L for security wall light bracket made out of GI pipe light grade 25 mm dia 1.2 metre length bent to shape and reduced to required size at top upto 1.5 metre length by cutting, welding and well finishing including MS clamp of flat iron of size 40x6 suitable length 2 sets complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats of aluminium paints over a coat of red oxide primer including dismantling one complete all as specified and as directed.

Supply and fixing of Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core. Make: Havell's/Polycab/ KEI/MESCAB

M & L clean dry river sand in trenches/ducts for cushioning to cable, 8 cm in depth before laying the cable and 15 cm in depth after laying the cable complete all as specified. Note:- Punned thickness shall be measured and paid.

Supply and laying for galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed of 25 mm size

S&F Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in for 15mm dia.

M & L for old size sub class ‘B’ bricks, laid in trenches as cable covers / protection complete all as specified and directed .

M/S SAROJ KUMAR SINGH (BID ID -3161345)

jaglalchoudharyandsons (BID ID -3161738)

M/S ANAND MOHAN ENTERPRISES (BID ID -3158384)

ANAHITAS INFOSOLUTIONS PRIVATE LIMITED (BID ID -3161484)

SINHA CONSTRUCTION (BID ID -3161437)