S/R to Section office II at Tihidi for the Year 2025-26

Removing Old lime or cement plaster from walls including raking out joints 12 mm deep and removing the debris within 50 m lead as per specification and direction of the Engineer-In-charge. .

Earthwork in excavation in foundation and trenches hard soil or gravelly soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of Engineer-in-charge.

Filling with sand well watered and compacted with appropriate rammer or mechanical compactor and top surface dressed and levelled to proper gradient as per direction of the Engineer-in-charge including watering and ramming with cost conveyance, royalities, taxes of all materials and labour with required for the work etc. complete as per specification and direction of the Engineer-In-charge.

Providing cement concrete 1:3:6 with 40 mm nominal size of hand/crusher broken hand granite stone aggregate of approved quality from approved quarry in foundation up to a depth of 1.5m.below ground level and up to a height of 1.5m above Ground level or Bed level including hoisting, lowering and laying in position in layers not exceeding 150 mm thick with proper packing and ramming to proper slope and level including curing dewatering, shoring, shuttering if necessary at the time of laying concrete with cost,conveyance, royalty,taxes of all materials required for the work, including supplying and working of pumps and all other materials required for the work, TandP articles, including all labour finishing the exposed surface, smooth, providfing grooves and beads where ever necessary etc. complete as per spoecification for Road and Bridge works and direction of Engineer-in-charge.

Providing cement concrete 1:2:4 with 12 mm nominal size of hand or crusher broken hand granite stone aggregate of approved quality from approved quarry in foundation up to a depth of 1.5m.below ground level and up to a height of 1.5m above Ground level or Bed level including hoisting, lowering and laying in position in layers not exceeding 150 mm thick with proper packing and ramming to proper slope and level including curing dewatering, shoring, shuttering if necessary at the time of laying concrete with cost,conveyance, royalty,taxes of all materials required for the work, including supplying and working of pumps and all other materials required for the work, including all labour finishing the exposed surface, smooth, providfing grooves and beads where ever necessary etc. complete as per spoecification for Road and Bridge works and direction of Engineer-in-charge.

Fixing Ceramic tiles in floors,treads or steps and landing on 25 mm thick bed of c.m. 1:1 jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing completeas per direction of EIC.

Providing fitting, fixing of AL door with anodized Al door section of 9202 as vertical member, 9201 as top member and 9200 as bottam and middle member with frame section no 9221 with tappered clip No 4660 and the frame to be completed by means of jointing angle No 1855 including all cost of labour ,hire charges of drilling machine,labour charges etc complete as per the direction of the Engineer-in charge.

Providing fitting and fixing of false ceilling with Aluminum anodised T section No 3215 with 2'-0" center to centre, L section No 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2'-0" x 2'-0" using 12mm thick prelaminated particle Board suspended from ceilling etc complete as directed by the Engineer-in-charge

Providing, fitting, fixing of GCI sheet in roof including drilling hole in wind ties, fixing of ridges wind ties etc. complete as per direction of the Engineer-in-Charge

Providing, Fitting and Fixing M.S. Iron angle of approved quality Including cost and conveyance of all materials to site, and all labour charges etc. complete as per specification and direction of the Engineer-In-charge.

12mm thick cement plaster 1:6 finished smooth to outside surface of brick wall after racking out the joints scraping and cleaning the surface including watering and curing for specified period etc. complete including all cost and conveyance, royalty, taxes of all materials etc.complete as per specification and direction of the Engineer-In-charge.

Providing, Fitting and Fixing stainless steel gate of approved quality Including cost and conveyance of all materials to site, and all labour charges etc. complete as per specification and direction of the Engineer-In-charge.

Finishing wall surfaces with Acrylic wall putty Water based of approved make and finished smooth and even surfaces to receive painting including cost of all materials taxes, labour etc. complete as per direction of the Engineer-in-charge.

Priming 1-coat with any approved primer including all labour etc complete as per direction of the Engineer-in-charge.

Wall painting 2-coats with plastic emulsion paint of approved shade on new work 1coats to give an even shade including cost and conveyance of all materials to site, and all labour charges etc. complete as per specification and direction of the Engineer-In-charge.