Installation of Network including Addition / Alteration of Certain Offices of IT and CS located at Various Floor DRDO Bhawan, New Delhi

Amount

CIVIL WORKS (ADDITION / ALTERATION)

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 grm/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm at 1200 mm centre to centre, one flange fixed to the angle hangers of 25 x 10 x 0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45 x 15 x 0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c including jointing and finishing to a flush finish of tapered and squared edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making opening for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitable fixed, all complete as per drawing, specification and direction of the Engineer-in-Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum moisture resistant board

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing 12 mm toughened glass partition of approved brand and manufacture,including all necessary fitting, all complete as per direction of Engineer- incharge .

Providing and fixing wooden wall panelling with decorative veener ply with 4 mm thick veneered ply fixed on 12 mm thick commercial ply secured on allumunium section framing panel of 600 mm c/c horizontally and vertically with vertical member 50X50X1.5 mm thick 1200 c/c alternatevely in column top nozing of size 50X20 mm section of teak wood . The top and bottom laminated to be pasted with band of 100 mm and finished with superior quality melamine polish of exposed surface in all complete as per direction of the Engineer in charge.

Supply and installation of Acrylic/vinyal washable wallpaper of standard thickness and approved design texture and pattern including preperation of base with white cement based wall putty and two coats of wall primer a nd smooth finish, without wave alongwith applying synthetic addessive of approved made and quality including pressing and rolling the wallpaper properly to achieve the smooth surface in all complete as per direction of the Engineer in charge.

Providing and laying of 8 mm thick pergo universal or equivalent laminated flooring (textured) AC-4 class of use 23/31 (as per EN- 13329) with 0.2 mm thick direct lamination 50 R on top of specially developed substuate core of plank size 1288 mm X 196 mm having smart lock tongue and groove construction with edge. duly impregnated to secure long lasting joints secured to genthen confirms to EN - 13329 including underlay of 0.2 mm thick alkali resistant polyethylene sheet (density 920-935 kg/cum with 1.5 mm thick extruded polyethylene foam (density 30-32 kg/cum on top to floating floor insulation and door profile etc

FURNITURE

Wooden officer Table :- Supply of officer table made of Commercial Block board BWP grade confirming to IS 1659 of size 1200x650x750mm with table top thickness of 38 mm of commercial Block Board grade conforming to IS 1659. The table will have double storage unit of size 400mm width and 650mm depth and a wooden keyboard tray. Size of table 1200x650x750mm.

Computer table:- Supply of wooden computer table made of THREE LAYER PRELAMINATED PARTICLE BOARD OF GRADE II TYPE II of IS 12823 of Size - 1220x610x760 mm with table top thickness of 19mm.The table will have a keyboard tray of three layer prelaminated particles board of grade II type II of IS 12823 of size 600x500x100mm of thickness 19mm. The table comes with a storage unit with three/four drawers of Size 400x480x100mm.

REVOLVING HIGH BACK CHAIR: Executive revoling chair (high back) supply of executive revolving chair of height 1220mm having following specifications: Back is made up of two pcs injection moulded frame having adjustable lumber support of polypropylene at multilevel across back and seat to be made up of 0.2 mm thick MS plate and upholstered with PU foam covered with mesh fabric with thicknss of 35 mm. Chair having Pedestal base made of aluminium die cast with ABS/Nylon twin caster wheels minimum 5 nos, of 50 mm size . The specification for the overall chair having backrest width 500mm seat depth 480mm backrest height 730 mm seat height-480mm, thickness of MS plate joining the under structure with seat 0.2 mm, oveall chair height-1220mm .

REVOLVING CHAIR OF MEDIUM BACK. Medium back revoling chair (medium back) supply of executive revolving chair of height 1125mm having following specifications: Back is made up of one pcs injection moulded frame with lumber support of polyproplylene at multilevel across back and seat to be made up of 1 mm thick MS plate and 12 mm thick plywood, upholstered with PU foam covered with mesh fabric mounted on main assembly and seat is made of 55 mm thick polyurethane foam covered with mesh fabric. Armrest (Adustable & are made of pu foam bounded chrome coted ) central tilt type chair having padestal base made of glass fibre nylon with ABS/Nylon twin caster wheels minimum 5 nos, of 50 mm size. The specification for the overall chair having backrest width 480 mm seat depth 480 mm backrest height 800mm seat height-520mm, thickness of MS plate joining the under structure with seat 1mm, oveall chair height-1125mm .

Wooden center table :- Supply of rectangular wooden center table of size 1000x650x410mm. Make of the table should be as per the specification : top material should be decorative black board BWP grade conforming to IS 1659 and the frame material including leg should be of teak wood, complete table should be of natural finish. the dimension of the table should be as per the specification: Height of centre table 410mm with thickness of 15 mm of top material.

Wooden Side table :- Supply of wooden side table of size 600x450x650mm. Make of the table should be as per the specification : top material should be 19 mm thick commercial block board MR Grade conforming to IS 1659 and the frame material including leg should be of teak wood, table top should be of glass finish. the dimension of the table should be as per the specification: Height of centre table 650mm with thickness of 19 mm of top material.

ELECTRIC SUPPLY

Supply of GI box 3M

Supply of GI box 6M

Supply of GI box 12M

Suppy of PVC sheet 6M

Suppy of PVC sheet 12M

Supply of Switch 5/6 Amp

Supply of Socket 5/6 Amp

Supply of Industrial Switch 32 A

Supply of Industrial Socket 32 A

Supply of Industrial Box 32 amps

Supply of PVC Condute Pipe - 1"

Supply of Copper Wire 6.0 Sq mm

Supply of Coper Wire 4.0 Sq mm

Supply of Copper Wire 2.5 Sq mm

Supply of Copper Wire 1.5 Sq mm

Supply of LED O/L Light 15-18 Watt

Supply of Distribution Panel D/D 16 Ways

Supply o fMCCB TPN 63 Amp

Supply of DB 32 Amp

Supply of MCB 16 Amp

Supply of MCB 32 Amp

Supply of MCB 10 Amp

Supply of Aluminium Armed Cable 16 sq mm - 4 core

COMMUNICATION

Supply & Fixing of Cat 6/information outlet (I/O Box loaded Port Cat 6 i/o with face plate). Make Amp or equivalent.

Supply, Laying and testing of 3 pair unarmoured telepnone cable. Make-Delton or equivalent.

Supply, Laying and testing of telephone cable 10 Pair JF Armoured.Make- Delton or eqivalent.

Supply,installation, testing and commissioning of 24 SLMA (Station Line Module analog) Card for extending the communication line for existing telephone exchange. Make : Seimens.

Supply of landline telephone sets Make : Beetel/panasonic

Supplying, Intallation, testing & Commmissioning of standalone Bio-Metric single door acess control system along with magnetic Em lock 600 LBS, power Adapter 12V/1AMP & Push button all complete with following specification password capacity 8 group, fingerprint capacity 2000 nos , card capacity 2000 , sendor optical sensor algorithithm version finger V10.0, interface for third party electric loc standard function ID card, automatic status switch, self service query fingerprint, password + card power supply 12V/2A FAR <= 0.0001% , FRP<= 1% , operating temperature Oc-45C, operating Humidity 20% - 80% , dimension 88 x 88 x 35 mm (Make Essl/Virdi/Zteco)

Providing and laying of 32 mm PVC pipe/Channel.

FIRE DETECTION

Supply, Installation, testing & Commissioning of addressable type multi sensor (smoke/heat) photo electric detectors with LED indicator lamp and all fixing accessories. Make EST

Supply & Laying of 2Cx1.5 sq.mm FRLS insulated armoured copper cable. Make Delton or equivalent.

Programing of loop cards for new smoke Detectors for exiting intelligent fire alarm system.

AIR - CONDITIONING

3.0 Tr.Wall mounted PAC (Precision Air-Conditioning) unit with airflow fo 2100 CMH as per below specificatons:-

i) 26 Deg C/50% RH of return air ii) Supply air in between 16 - 18 Deg C iii) 45 Deg C of design ambient temperature (work up to 48 Deg. C) iv) specific power consumption shall be low as per site design conditions including compressor, evaporator fans and condensers. The indoor unit shall compire of scroll compressor, indoor EC fans, Evaporator DX cooling coil with hydraulic coating, Microprocessor valves, Driers, G4 filter,Suction and discharge piping internal power and control wiring, HP/LP cutouts, power and control contractors and other electrical accesssories. The system done by multiple units shall works with efficient cascade way, trying to maximise energy efficiency always working where EC fans are more effective. The outdoor condenser unit shall comprise of compressor, condenser fans & motor, condenser cooling coil (copper coil with aluminum fins), fan speed controller, isolater switch. The condensing temperature of matching air-cooled condenser not to exeed 51 deg C at design conditions. The unit shall be suitable fo operation on 415 Volts, 50 HZ, 3 phase, 4 wire AC supply. Each unit should be having insdividual display panel which shall display date, time, actual & set valves, operating conditions, single faults, colllective faults, limiting valves and PAC wellness alarm/ service alarm t reduce the down time and unit memory shall hold the events with ID number, time and date stamp for each events.

The dimensions of the unit shall not be more than 1100mm x 375mm x 510mm (L x D x H) Team mode feature for PAC units controller for synchronizing the multiple No. Of units to work as single system for all above units. Load sharing mode feature cascading effect sequencing of above units. Lowside accessories and installation & commisioning.

Supply & fixing fo 18G/16G interconnecting copper piping between indoor & outdoor unit along with support, fitting, paint and accessories. Copper piping will be duly insulated with in the AC space only(Rajco or reputed makes).

Hot gas line

Liquid line

Supply & fixing of indoor & Outdoor unit stands duly painted with anti corrosive black paint, vibration pads, nut & bolts and fixing accessories.

Initial charge of R-407c/410 refrigerant gas & oil.

Supply and laying of interconnecting FRLS copper cabling between indoor & outdoor unit with fitting and accessories W/O cable tray for cab/Havells/Reupted makes.

Supply and laying of interconnectiong FRLS copper cabling between indoor & outdoor unit with fitting and accessories w/o cable tray for control signal (2c x 0.5sqmm) - Polycab/Havells/Reupted

Supply & laying of incoming FRLS copper cabling from incoming isolator to CRAC unit (4c x 65sqmm) - Polycab/Havells/Reupted makes.

Supply & laying of HDPE/PVC condensate drain piping with insulation in building area along with fitting and accessories.

Drain pump

LIRA CONSTRUCTIONS PVT LTD