SPECIAL REPAIRS TO ROAD IN MD ACCN OF KKD LINES 512 ARMY BASE WKSP AND SPECIAL REPAIRS TO PERIMETER ROAD AT A AND B PARK OF CAFVD KIRKEE UNDER GE (CENTRAL) KIRKEE

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 7.50 cm deep and getting out in hard/ dense of soil all as specified and directed by Enger-in-Charge

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed by Enger-in-Charge.

M & L Repairs to pot holes any depth n,exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads etc, cutting around edges atleast 25mm in depth, making good by applying tack coat @ 5Kg per 10Sqm of paving bitumen (VG-30), putting in premix bituminous macadam well rammed and sealed with binder 9.8 Kg per 10 Sqm of paving bitumen, blinded with o.09 cum of stone chippings 6.3mm size and again well rammed(including supply of premixed macadam binder and chippings) depth of pot holes exceeding 30mm. Complete all as specified and directed by Engr-in-Charge

M&L for Scarifying or picking up gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm and depth exc 50mm and n.exc 100mm. Complete all as specified and directed by Engr-in-Charge

M&L for 75mm thick (compacted thickness) WBM with granite, trap or basalt agregates of grading 2 (63 to 40mm size) or of grading 3 (50mm to 20mm size), spread, rolled and consolidated to gradient materials and camber required complete all as specified and directed by Engr-in-Charge

All as per Item No 5 above but except materials

M &L Preparing unsurfaced WBM surface by brushing with wire brush for removing caked mud etc., sweeping with brooms, and finally fanning the cleaned surfaces with gunny bag to remove all loose dirt etc and for applying evenly a tack coat with bituminous emulsion RS-1 @ 10 kg per 10 Sqm with sprayer over existing surface etc complete all as specified and directed by Engr-in-Charge

M & L Premix bituminous macadam with 4% binder content using paving bitumen VG-30) by weight of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less). Complete all as specified and directed by Engr-in-Charge Note :- The contractor quoted the rate shall be deemed to include the follwing elements:- (i) The contractor shall get the mix design done through Govt approved lab and shall get the same got approved from GE before incorporating in the work. (ii) Contractor shall submit the authenticated weigh batch receipt for every load of materials brought at site. (iii) No price adjustment for bitumen shall be done for variation on plus side.

M &L fo preparing of existing black top surface by brushing with wire brush for removing caked mud etc., sweeping with brooms, and finally fanning the cleaned surfaces with gunny bag to remove all loose dirt etc and for applying evenly a tack coat with bituminous emulsion RS-1 @ 5 kg per 10 Sqm with sprayer over existing surface etc complete all as specified and directed.

M & L applying evnly a tack coat with bitumen emulsion RS-1 @ 3Kg/10Sqm with sprayer over premix bitumen macadam surface, complete all as specified and directed by Engr-in-charge.

M&L for bituminous premixed asphaltic semi-dense concrete using paving bitumen (VG-30 grade), 30mm thick (Consolidated thickness) using binder content @ 5.5% by weight of total mix (Job mix), using mechanical paver rolled with 8 to 12 tonne power roller & compacted to required camber and gradient complete complete all as specified and directed. Note :- The contractor quoted the rate shall be deemed to include the follwing elements:- (i) The contractor shall get the mix design done through Govt approved lab and shall get the same got approved from GE before incorporating in the work. (ii) Contractor shall submit the authenticated weigh batch receipt for every load of materials brought at site. (iii) In case variation in the bitumen content as per approved design mix in comparison with the bitumen content as specified above, the variation in quantity of bitumen shall be adjusted with price adjustment.

M&L for Moorum spread(spreading thickness 75mm) rolled and consolidated to X sqm qradient and camber required complete all as specified and directed by Enger-in-Charge

S & F in repairs Cat eyes ABS body with scratch and abrasion reistant micro prismatice polycarbonate and ultrasonically welded lens temperature reistant body and lens, size 90 x 110 x 17mm (Red/Yellow colours) complete all as specified and directed by Engr-in-charge.

M&L for preparation of New/existing black bituminous road/concrete surface and painting lines dashes (continuous/interrupted), arrows,letters etc on road 2.5 + 0.5mm thick and n. exc 10cm wide with one coat of hot applied white /golden/yellow auto retro-reflective thermoplastic road marking paint with reflectory glass beads on bituminous road all as specified in clause 803.40 of MOSRT&H specification over a coat of self primer using special applicator machine as per IRC pattern including cleaning of road surface free from dust & moisture and putting in duly mixed with 8% mica sign special applicatore machine complete all as specified and directed by Enger-in-Charge

PAVEWAY CONSTRUCTIONS PRIVATE LIMITED

Sunshine Ventures