dwf to reddy colony

Construction of RCC 20 Kl OHSR of Capacity with 12 metre staging with raft foundation using M 30 grade of concrete and Fe 500 grade steel as per approved designs and drawings.Side walls of OHSR shall be plastered with CM(1:1.5) prop. 12mm thick and shall be painted with epoxy paint in three coats including roof.Out side of the structure shall be painted with snowcem paint two coats of approved quality paint over primary coat. The rate including cost, conveyance of cement conforming to IS 269 1976 and steel confirming to IS 1786-1979 to site and fabrication charges of steel etc,fixing of following items.NOTE: -1) For intermediate ranges proportional rates may be adopted. All VRCC shall be in M30 grade design mix.2) Rate inclusive of three coates of food grade epoxy paint to inner surface of the reservoir including roof dome.3) The above rates be adopted for estimate purposes for construction of ELSR for a finished work including 2 coats of wheather proof emulsion painting for external surfaces, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections but excluding cost of pipes,bends and valves as per departmental designs and drawings.4) Fixtures include :a) RCC or Aluminium ladder inside 0.60 m wide.b) spiral staircase on the outside shall be provided upto 200KL ELSR. Above 200KL ELSR Capacity dog legged staircase shall be provided with staircase flight width of 1.0mts and landing width of 1.20mts with S.S railing upto 1.0 height.c) Lightening arrestor, including conductor and earthing etc with relevant IS codes.d) RCC ventilators with copper or stainless steel fly proof mesh.e) D.I Manholes frame and cover 0.60x0.60 m as per IS specifications (light duty) - 2 Nos.f) Water level indicator of good quality with ebonite/ copper float approved pattern - 1 No.g) The ladder shall be with Aluminium and Verticals with HDPE of 10kg/Sqcm shall be provided for single column OHSRs only. h) Minimum staging for all ELSR/OHSR shall be 12.0mts.i) The increase in staging shall be at 1.0mt interval.j) The railing provided to the gallery and staircase shall be with stainless steel of grade 304 for a height of 1mtsk)The railing provided to the gallery and stair case shall be with stainless steel of grade 304 for a height of 1.20mts.l)The dog legged staircase shall be enclosed with brick/CRS wall on three sides and front side with PVC door of standard maker up to 1st brace level from ground level to prevent unauthorized entry.m) D.I swan neck ventilators shall be provided in top dome and slab.n) The above rates are exclusive of all inlet, outlet connection and valves. All valves near inlet, out let and for scour of ELSRs shall be D.I valves.

Supply and Delivery of 5/8" dia. And 3" long Nuts and Bolts and rubber gasket including loading , unloading and transportation to site etc., complete. Including contractors profit-dia 100mm

Supply and Delivery of 5/8" dia. And 3" long Nuts and Bolts and rubber gasket including loading , unloading and transportation to site etc., complete. Including contractors profit-dia 200mm

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation & taxes for Inlet connections 100 mm dia D/F pipes - 2m. Long

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation & taxes for Inlet connections 100 mm dia D/F pipes - 1m. Long

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation & taxes for Inlet connections 100 mm dia Duck Foot bens

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation & taxes for Inlet connections 100 mm dia Bell Mouths

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation & taxes for Inlet connections 100 mm dia Semi Circlur Bend

DI D/F Gate valves ( soft Seated ) valves conforming to IS 3896-oart 2-1985 wedge fully rubber lined with EPDM food grade quality and the valve should be of vacuum tight and 100% leak proof with face to face dimensions. All the valves should be with Electrostatic powder caoting both insisde and outside pockets body passages.Drilled as per IS: 1538. for 100 mm dia

.Supply and Delivery of HDPE ( PE100)pipes as per IS:4984/1988,with its amendments and revisons thereon including cost of pipes, specials as per requirements, tranportation etc. including earth work excavtion for pipe line trench in all soils upto SDR except Rock requiring blasting, lowering, laying and jointing of pipe lines true to alignment and gradient, and refilling trenches with excavated earth (other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc.,75 mm dia 10 Kg Cm2

Supply and delivery of Single Chamber DI Air Valve of PN 1.6 rated with Body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue, drilled as per IS:1538.with Supply and delivery including fixing charges all incidental and operational charges etc complete for finished item of work.. (SSR Page 640 of 668)

Manufacture, Supply and Fixing of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846- 000/DIN 3202 F 4. All the valves should be with lectrostatic powder coating both inside and outside pocket less body passage. Drilled as per equirement of the dept. 80 mm dia 75 mm dia Pipe Line

construction of air valve pedestals

Supply and Deleviery of Pipe line as per IS:4984/1988,with its amendments and revisons thereon including supplying of pipes, specials as per equirements Excluding all Taxes. 75 mm HDPE 6 Kg

Supply and Deleviery of Pipe line as per IS:4984/1988,with its amendments and revisons thereon including supplying of pipes, specials as per equirements Excluding all Taxes. 90 mm HDPE 6 Kg

Supply and Fixing DI D/F Gate valves ( soft Seated ) valves with C/o Chamber conforming to IS 3896-oart 2-1985 wedge fully rubber lined with EPDM food grade quality and the valve should be of vacuum tight and 100% leak proof with face to face dimensions. All the valves should be with Electrostatic powder caoting both insisde and outside pockets body passages.Drilled as per IS: 1538 80 mm dia on 90 mm

Construction of pipe line for water supply with HDPE pipes as per IS:4985/1988,with its amendments and revisons thereon including lowering, laying and jointing of pipe lines true to alighnment and gradient, trench excavtion for pipe lines in all soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost,conveyance of all materials and labour charges for finished item of pipe line work and Excluding all Taxes. 75 mm HDPE 6 Kg

Construction of pipe line for water supply with HDPE pipes as per IS:4985/1988,with its amendments and revisons thereon including lowering, laying and jointing of pipe lines true to alighnment and gradient, trench excavtion for pipe lines in all soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost,conveyance of all materials and labour charges for finished item of pipe line work and Excluding all Taxes. 90 mm HDPE 6 Kg

Cutting CC road surface including stacking of excavated materials Excluding all Taxes. For pipe dia 63 mm to 315 mm. Cutting open BT.Road Surface

Cutting CC road surface including stacking of excavated materials Excluding all Taxes. For pipe dia 63 mm to 315 mm. Cutting open CC.Road Surface

Supply and delivery of 15mm dia House service connection as per standard specification including the cost of the materials like Clamp Saddle/ Electro fusion Saddle confirming to prEN 12201-3, Manufactured from virgin resin of PE-SO/PE-100 with FLOW CONTROL VALVE (5 LPM @5m head), Compression Elbows, MDPE PESO Blue Pipe & Supplying and and including cost of 15mm dia meter brass body CP finish bib tap of BIS standard etc including GI verticals complete for finished item of work 75 mm dia

Supply and delivery of 15mm dia House service connection as per standard specification including the cost of the materials like Clamp Saddle/ Electro fusion Saddle confirming to prEN 12201-3, Manufactured from virgin resin of PE-SO/PE-100 with FLOW CONTROL VALVE (5 LPM @5m head), Compression Elbows, MDPE PESO Blue Pipe & Supplying and and including cost of 15mm dia meter brass body CP finish bib tap of BIS standard etc including GI verticals complete for finished item of work 90 mm dia

Fixing of Saddles, FCV's, GI Pipe, Bib Taps and MDPE including lowering, laying and jointing including earth work

Supply and placing of the Nominal MIX using 20mm size for construction of CC blocks including cost and conveyance of all materials like cement, for M-20 grade

Construction of RCC 60 Kl OHSR of Capacity with 12 metre staging with raft foundation using M 30 grade of concrete and Fe 500 grade steel as per approved designs and drawings.Side walls of OHSR shall be plastered with CM(1:1.5) prop. 12mm thick and shall be painted with epoxy paint in three coats including roof.Out side of the structure shall be painted with snowcem paint two coats of approved quality paint over primary coat. The rate including cost, conveyance of cement conforming to IS 269 1976 and steel confirming to IS 1786-1979 to site and fabrication charges of steel etc,fixing of following items.NOTE: -1) For intermediate ranges proportional rates may be adopted. All VRCC shall be in M30 grade design mix.2) Rate inclusive of three coates of food grade epoxy paint to inner surface of the reservoir including roof dome.3) The above rates be adopted for estimate purposes for construction of ELSR for a finished work including 2 coats of wheather proof emulsion painting for external surfaces, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections but excluding cost of pipes,bends and valves as per departmental designs and drawings.4) Fixtures include :a) RCC or Aluminium ladder inside 0.60 m wide.b) spiral staircase on the outside shall be provided upto 200KL ELSR. Above 200KL ELSR Capacity dog legged staircase shall be provided with staircase flight width of 1.0mts and landing width of 1.20mts with S.S railing upto 1.0 height.c) Lightening arrestor, including conductor and earthing etc with relevant IS codes.d) RCC ventilators with copper or stainless steel fly proof mesh.e) D.I Manholes frame and cover 0.60x0.60 m as per IS specifications (light duty) - 2 Nos.f) Water level indicator of good quality with ebonite/ copper float approved pattern - 1 No.g) The ladder shall be with Aluminium and Verticals with HDPE of 10kg/Sqcm shall be provided for single column OHSRs only. h) Minimum staging for all ELSR/OHSR shall be 12.0mts.i) The increase in staging shall be at 1.0mt interval.j) The railing provided to the gallery and staircase shall be with stainless steel of grade 304 for a height of 1mtsk)The railing provided to the gallery and stair case shall be with stainless steel of grade 304 for a height of 1.20mts.l)The dog legged staircase shall be enclosed with brick/CRS wall on three sides and front side with PVC door of standard maker up to 1st brace level from ground level to prevent unauthorized entry.m) D.I swan neck ventilators shall be provided in top dome and slab.n) The above rates are exclusive of all inlet, outlet connection and valves. All valves near inlet, out let and for scour of ELSRs shall be D.I valves.

Constuction of RCC valve chambers as per requirement with VRCC side walls,slab and RCC manhole cover with locking arrangements including cost conveyence of all materials for construction of valve chamber and Jointing materials, and labour charges etc. complete for finished item of work but excluding cost of DI D/F Gate valves(soft Seated) its CED, as specified in Technical specifications.but including seignoarge charges ,cost of specials & Contractors profit but excluding VAT, labour cess , NAC income tax , QC etc

Supply and Delivery of 5/8" dia. And 3" long Nuts and Bolts and rubber gasket including loading , unloading and transportation to site etc., complete. Including contractors profit-dia 100mm

Supply and Delivery of 5/8" dia. And 3" long Nuts and Bolts and rubber gasket including loading , unloading and transportation to site etc., complete. Including contractors profit-dia 200mm

Centrifugally cast (Spun) Ductile Iron pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation & taxes for Inlet connections

D/F pipes - 2m. Long

D/F pipes - 1.0m. Long

Centrifugally cast (spun) Ductile Iron Fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) Excluding Transportation and Taxes.

Duck foot bends

Outlet connections 2 No,s

D/F pipes - 2m. Long

D/F pipes - 1.0m. Long

Duck foot bends

Scour connections

D/F pipes - 2m. Long

D/F pipes - 1.0m. Long

Duck foot bends

Semicircular bend

Overflow connections

D/F pipes - 2m. Long

D/F pipes - 1.0m. Long

Duck foot bends

DI D/F Gate valves ( soft Seated ) valves conforming to IS 3896-oart 2-1985 wedge fully rubber lined with EPDM food grade quality and the valve should be of vacuum tight and 100% leak proof with face to face dimensions. All the valves should be with Electrostatic powder caoting both insisde and outside pockets body passages.Drilled as per IS: 1538

Sluice valve for Inlet

Sluice valve for Outlet

Sluice valve for Scour

Supply and Deleviery of Pipe line as per IS:4985/1988,with its amendments and revisons thereon including supplying of pipes, specials as per equirements Excluding all Taxes.

90 mm HDPE 6 Kg

110 mm HDPE 6 Kg

Supply and delivery and DI D/F Gate valves ( soft Seated ) valves conforming to IS 3896-oart 2-1985 wedge fully rubber lined with EPDM food grade quality and the valve should be of vacuum tight and 100% leak proof with face to face dimensions. All the valves should be with Electrostatic powder caoting both insisde and outside pockets body passages.Drilled as per IS: 1538

80mm dia on 90mm

'Construction of pipe line for water supply with HDPE pipes as per IS:4985/1988,with its amendments and revisons thereon including lowering, laying and jointing of pipe lines true to alighnment and gradient, trench excavtion for pipe lines in all soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost,conveyance of all materials and labour charges for finished item of pipe line work and Excluding all Taxes.

90 mm HDPE 6 Kg

110 mm HDPE 6 Kg

Fixing of DI D/F Gate valves ( soft Seated ) by Jointing DI Specials to suit the pressure class of pipe and constuction of RCC valve chambers as per requirement with VRCC side walls,slab and RCC manhole cover with locking arrangements including cost conveyence of all materials for construction of valve chamber and Jointing materials, and labour charges etc. complete for finished item of work but excluding cost of DI D/F Gate valves(soft Seated) its CED, as specified in Technical specifications.but including seignoarge charges ,cost of specials & Contractors profit but excluding VAT, labour cess , NAC income tax , QC etc

80mm dia on 90mm

Cutting CC road surface including stacking of excavated materials Excluding all Taxes. For pipe dia 63 mm to 315 mm.

Cutting open C.C.Road Surface

Cement concrete (M 20) Nominal Mix using 20mm guage HBG metal including cost and conveyance of all materials and labour charges etc., complete.

C.C.Road Surface

Drilling of borewell by down the hole hammer (DTH) drilling to the finished diameter of 163 mm (6 1/2") in all formations to the depth as specified and reaming the bore to the required dia, flusing the bore walls at an average pressure of 7 kg/Sqcm (100 PSI), conducting yield test, inclusive of transportation from point to point, crew charges, consumables, shifting of ring and all other charges etc., complete. The borewell should be true & Vertical and work should be carried out to the amendments if any from time to time.

Supply & Fixing of 180mm dia 6Kg/cm2 UPVC Casing pipes for borewells for potable water supply conforming to IS 12818-1992 as amended from time to time including transportation, QC inspection etc complete

Manufacture, Supply, delivery of submersible Pump11set suitable to 150mm dia Borewells coupled with motor Three phase 2880 RPM 340V(-15%+10% range-290 to 375 Volts) of reputed make with minimum overall efficiency of 40% at the duty point with Radial including cost and conveyance of material, all taxes surcharges, Sale tax, Exice duty, TOT, Over head charges & Transporting charges etc., The Pumpset should confirm to IS 8034:1989 and Motor should confirm to IS 9283:1979 with ISI/ISO 2000 mark with a guarantee period of 18 months from the date of installation. 5.00HP 12-16 Staging Three face submmersible pumpset rate as per approved. Makes : Texmo / CRI / KSB / Aryan Varsha / Lubi

Supply and Transportation of control panel for three phase submersible motors up to 5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor, suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete.

S/D of 50mm dia SS Nipple

Supply and delivery of PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade up to 1100 Volts as per IS: 694:1990 including all transportation charges etc complete.Makes : Finolex / RR kabel / Havells / Polycab /RPG / KEI / Gloster / V-Guard 3 Core 2.5Sq.mm

Supply & Delivery of 60/50mm dia uPVC Pipes including all taxes & duties etc. complete.

S/D of 50mm Clampset & Nut bolts

S/D of 50mm dia Non Return Valve

Supply and Delivery of 7/20 single core service wire

Supply and fixing of Bore Cap

Installation, Erection & commissioning of Submersible pumpset

Manufacture, Cost of PVC / HDPE Pipes including all taxes and loading, unloading and transportation to site etc., complete. For 140mm dia 6Kgs/cm2 HDPE Pipes

Manufacture, Cost of PVC / HDPE Pipes including all taxes and loading, unloading and transportation to site etc., complete. For 110mm dia 6Kgs/cm2 HDPE Pipes

Manufacture, Cost of PVC / HDPE Pipes including all taxes and loading, unloading and transportation to site etc., complete. For 90mm dia 6Kgs/cm2 HDPE Pipes

Manufacture, Cost of PVC / HDPE Pipes including all taxes and loading, unloading and transportation to site etc., complete. For 75 mm dia 6Kgs/cm2 HDPE Pipes

Manufacture, Cost of PVC / HDPE Pipes including all taxes and loading, unloading and transportation to site etc., complete. For 63 mm dia 6Kgs/cm2 HDPE Pipes

Earthwork excavation for Pipe line trench work using 1/3rd Manual Means and 2/3rd Qty of Mechanical Means using Hydraulic Excavator and depositing on bank for all lifts and with an initial lead of 10m including cost and conveyance of all materials and Labour charges etc., complete. For Pipe line Trenches 140mm dia 6Kgs/cm2 HDPE Pipes

Earthwork excavation for Pipe line trench work using 1/3rd Manual Means and 2/3rd Qty of Mechanical Means using Hydraulic Excavator and depositing on bank for all lifts and with an initial lead of 10m including cost and conveyance of all materials and Labour charges etc., complete. For Pipe line Trenches 110mm dia 6Kgs/cm2 HDPE Pipes

Earthwork excavation for Pipe line trench work using 1/3rd Manual Means and 2/3rd Qty of Mechanical Means using Hydraulic Excavator and depositing on bank for all lifts and with an initial lead of 10m including cost and conveyance of all materials and Labour charges etc., complete. For Pipe line Trenches 90mm dia 6Kgs/cm2 HDPE Pipes

Earthwork excavation for Pipe line trench work using 1/3rd Manual Means and 2/3rd Qty of Mechanical Means using Hydraulic Excavator and depositing on bank for all lifts and with an initial lead of 10m including cost and conveyance of all materials and Labour charges etc., complete. For Pipe line Trenches 75 mm dia 6Kgs/cm2 HDPE Pipes

Earthwork excavation for Pipe line trench work using 1/3rd Manual Means and 2/3rd Qty of Mechanical Means using Hydraulic Excavator and depositing on bank for all lifts and with an initial lead of 10m including cost and conveyance of all materials and Labour charges etc., complete. For Pipe line Trenches 63 mm dia 6Kgs/cm2 HDPE Pipes

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc., complete for finished item of work including seigniorage excluding dewatering charges etc., as per SS-20B (APSS 308), For Vertical Posts, Platforms, For Drains

Plain cement concrete corresponding to (1:5:10) prop mix nominal mix (Cement: fine aggregate: coarse agregate) using 40mm size hard broken granite (IS 383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse agregate, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidential, and labour charges such as mixing, laying and ramming concerete in layers in position not exceeding 15cm finishing top surface curing concrete etc., complete for finished item of wor for Platform, Vertical posts, For Curbs, For Drains, For Drain curbs

Plastering with CM (1:5) using 12mm thick including cost and conveyance of all materials and labour charges etc., complete, For Platforms, For curbs, For Drains, For Drain curbs

Collection and filling of Stone Dust with departmental pre-measurements, irrespective of thickness including cost and conveyance of all materials, labour charges, watering and tamping etc., complete, around the platform

Fixing of Battery of Taps including Transportationfrom Gowdown ,keeping in position the vertical posts etc., complete.

Painting two coats with approved brand departmental color including C/c of all materials and L/c etc., complete.

Removing of Battery of Taps including Transportation to Godown etc., complete.

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc., complete for finished item of work including seigniorage excluding dewatering charges etc., as per SS-20B (APSS 308), For Vertical Posts, Platforms, For Drains

Plain cement concrete corresponding to (1:5:10) prop mix nominal mix (Cement: fine aggregate: coarse agregate) using 40mm size hard broken granite (IS 383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse agregate, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidential, and labour charges such as mixing, laying and ramming concerete in layers in position not exceeding 15cm finishing top surface curing concrete etc., complete for finished item of wor for Platform, Vertical posts, For Curbs, For Drains, For Drain curbs

Plastering with CM (1:5) using 12mm thick including cost and conveyance of all materials and labour charges etc., complete, For Platforms, For curbs, For Drains, For Drain curbs

Collection and filling of Stone Dust with departmental pre-measurements, irrespective of thickness including cost and conveyance of all materials, labour charges, watering and tamping etc., complete, around the platform

Manufacture, Supply and Delivery of Structural steel including, fabrication charges, all taxes and loading, unloading and transportation to site etc., complete., Plates 6mm thick @ 3.00kg/each, Hold fasts @ 0.25kg/each

Supply and Delivery of 50mm dia GI pipe including all taxes and transportation to site etc., complete.

Supply and Delivery of HDPE and GI specials including all taxes and transportation to site etc., complete. 15mm dia. GI pipe (TBSP-G.I-07)

Supply and Delivery of HDPE and GI specials including all taxes and transportation to site etc., complete. 15mm dia. GI Couplings

Supply and Delivery of HDPE and GI specials including all taxes and transportation to site etc., complete. 15mm dia. GI Elbows

Supply and Delivery of HDPE and GI specials including all taxes and transportation to site etc., complete. 50 mm dia brass gate valve

Supply and Delivery of HDPE and GI specials including all taxes and transportation to site etc., complete. 50 mm dia GI union

Supply and Delivery of HDPE and GI specials including all taxes and transportation to site etc., complete. 4" long nuts and bolts

Supply and Delivery of HDPE and GI specials including all taxes and transportation to site etc., complete. 50 mm dia GI elbow

Supply and Delivery of HDPE and GI specials including all taxes and transportation to site etc., complete. 50 mm dia GI Tee

Taking branch water connection from the existing 15 mm nominal size GI pipe including cutting threading, etc., complete with fitting TBSP-G.IV-03

Fixing of Battery of Taps including Transportationfrom Gowdown ,keeping in position the vertical posts etc., complete.

Painting two coats with approved brand departmental color including C/c of all materials and L/c etc., complete.

Manufacture, Supply and Delivery of Structural steel including, fabrication charges, all taxes and loading, unloading and transportation to site etc., complete. Plates 6mm thick @ 3.00kg/each & Hold fastens, Hold Fast @ 0.25 Kg/each

Supply and delivery of 15 mm dia GI pipe

Supply and delivery of 15 mm dia GI elbows

Supply and delivery of 50 mm dia union

Supply and delivery of 50 mm dia GI Elbow

Supply and delivery of 50 mm dia GI pipe

S & F Bronze Gate/ Globe valve as per IS - 778 Class - I,Indianmakeheavytype-50mmNBSize TBSP-G.III-06

Hire charges of 30KVA Generator excluding the cost of fuels and transportation charges from Warangal to Medaram for Testing Pipe Lines, cisterns etc., complete. For Repair and testing of existing pipe line and BOT's For Testing of pipeline ( 3 Schemes, 3 hours per day)

Hire charges of 30KVA Generator excluding the cost of fuels and transportation charges from Warangal to Medaram for Testing Pipe Lines, cisterns etc., complete. For Repair and testing of existing pipe line and BOT's During Jathara Period, idle charges

Hire charges of 30KVA Generator excluding the cost of fuels and transportation charges from Warangal to Medaram for Testing Pipe Lines, cisterns etc., complete. For Repair and testing of existing pipe line and BOT's Fuel Charges during Jathara, Running period

Erection of Existing Pumpset including labour charges etc., complete.

Removing of Pumpset and Transport to Godown

PUMP OPERATOR CHARGES For Repair and testing of existing pipe line and BOT's

PUMP OPERATOR CHARGES For Opertation and Maintenance of pipe line and BOT's during the Jathara Period

PUMP OPERATOR CHARGES Generator operator during jathara

Labour charges and Plumber engaged for fixing of G.I pipes, sluice valves, attending leakages etc., during erection and testing of pipe lines, cisterns etc., complete For Repair and testing of existing pipe line and BOT's, Plumbers

Labour charges and Plumber engaged for fixing of G.I pipes, sluice valves, attending leakages etc., during erection and testing of pipe lines, cisterns etc., complete For Repair and testing of existing pipe line and BOT's, Electrician

Labour charges and Plumber engaged for fixing of G.I pipes, sluice valves, attending leakages etc., during erection and testing of pipe lines, cisterns etc., complete For Repair and testing of existing pipe line and BOT's, Man Mazdoor

Labour charges and Plumber engaged for fixing of G.I pipes, sluice valves, attending leakages etc., during erection and testing of pipe lines, cisterns etc., complete For Opertation and Maintenance of pipe line and BOT's during the Jathara Period Plumbers

Labour charges and Plumber engaged for fixing of G.I pipes, sluice valves, attending leakages etc., during erection and testing of pipe lines, cisterns etc., complete For For Opertation and Maintenance of pipe line and BOT's during the Jathara PeriodElectrician

Labour charges and Plumber engaged for fixing of G.I pipes, sluice valves, attending leakages etc., during erection and testing of pipe lines, cisterns etc., complete For Opertation and Maintenance of pipe line and BOT's during the Jathara Period, Man Mazdoor

Cost,Supply and Delivery of 25 mm Dia 10.0Kg/cm2 PVC pipe including all taxes, loading unloadingandtransport to site etc., complete

Lowering, Laying, jointing of for PVC pipes including earth work excavation and testing to hydralic test pressure including cost of water with a water lead of 500m etc., complete.

G.I. Strip / Plate / Wire (per K. G)

Tap Connection with Excavtion at saddle, pipe connection, Salak bottle, Thread bendals

Plumber engaed for operation and maintance of water supply

Man mazdoor Enged for operation and maintance