Kanyakumari District Anjugramam Town panchayat CGF 2023 2024

Amount

Earth work excavation and depositing on the bank with initial lead and lift of 10 metres and initial lift of 2 metres in hard stiff stiff clay stiff block cotton hard red earth murram, gravel stoney earth and earth mixed with small size boulders and hard gravelly soils (SS 20 B) etc., complete as per standard specification

Plain cement concrete Using 1:4:8 mix ( One cement , four Crushed Stone Sand and Eight aggregates) using 40 mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying,consolidating and curing etc complete as per the standard specifications. TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII

Supplying and erecting steel centering for sides and soffits including supports and strutting upto 3.29 m height for plain surface as RCC slabs, rectangular tee (or) elbeams, lintel, bed block stair case waist slab, landing slab, etc., complete as per standard specification - 10m2 as per TNDSS & Morth specification No:30 & 36 (RCC work)

Reinforced cement concrete 1:11/2:3 (one cement one and half sand and three aggregate) using 20mm size I.S.S. metal including cost conveyance of materials to site and all labour charges etc., mixing laying consolidating curring etc., but excluding cost of steel etc., complete as per standard specification as per TNDSS NO: 30 V,VI (S3) VII-3

Supplying, fabricating and placing in position of mild steel or TMT rods, including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete as per SS. TNDSS NO: 97 V,VI (S6) VII (S6) VII-3

Brick work in cement mortar 1:5 mix using (One cement and five sand) using best quality of III class Country bricks of size (8 3/4"x4 1/4"x 2 3/4") for foundation including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification TNDSS specification No.31 & 31C

Plastering in cement mortar 1:4 (one cement Four sand) using 12mm thick including cost and conveyance of all materials and labour charges etc, complete as per standard specification. [MoRTH Specification: Clause:1000/1300]

Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A (Sl.No.358)

Supply and fixing of mild steel grill works for windows, ventilators, etc including redoxide priming coat and cost of materials and all labour charges etc. complete.

Painting two coats over new iron work with ready mixed paint of apprved quality and colour including cost of all materials and labour charges etc complete as per SS

Supply, Erection of 7m Free Standing Double Arm Bracket 8 sided Octogonally continously tapered structured pole with base plate of size 250 x 250 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 140mm Top Pole Dia - 70 mm Thickness of Pole - 3 mm The pole should be hot dip galvanized confirming to BESN ISO 1461 with thickness of 65 Micron (PWD Schedule of rate 2023-2024)

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting . (SD 535)

Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work (SD- 234)

Supply and Laying of 2 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated a depth of 0.75 mtr. Putting on 0.15 mtr. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good as per standard etc. complete. (SD-198)

Supply and providing cable and termination of 2 x 16 sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by climping etc. complete as per standard specification and as direced by the departmental officers. (SD-235) (Rs. 320/2)

Supply and fixing of brass cable gland for 2 x 16 sq.mm PVC armoured LTUG cable with earth connection as per standard specification. (SD-183)

Supply and Laying of 50mm / 38mm dia HDPE pipe for covering of Cables as per standard and as directed by the departmental officer (PWD schedule of rate 2022-2023, Page 136)

Supply and delivery of 80mm G.I Medium class pipes and specials as per relevant IS 1239 PART 1/90 for covering the Cables in Channel crossing.

Supply and fixing of Single Phase Automatic Timer Switch arrangement consisting and made up of MS 18 gauge box having size of 18” x 12” x 10” with Lock and key arrangement with weather proof powder coated painting and suitable size of 6mm thick hylum sheet fixed inside the box using MS bolts & nuts including supply and fixing Dial type timer (L&T FM1 Quartz), MNX 32A contactor L&T make, Double pole 6 to 32A 10KA MCB – 1 No, 6 to 32A single pole MCB-2 Nos, Neutral Link, pilot Lamps and connector black etc. in the hylum sheet and internal wiring using 2.5 Sq.mm PVC Multi Stand copper wire including cost of materials, Labour charges etc. complete as per standard and as directed by the departmental officer (Q).

D JOHN