Loading…
Loading…
Tender Value
₹3 L
EMD Value
₹3,000
Closing Date
8 Sept 2026, 12:00 pm
Executive Engineer, WRD.,
Office of the Executive Engineer, WRD., Middle Pennaiyar Basin Division, Tiruvannamalai - 606 603.
Special Repairs to Shutters at 11R(C), 12R, 14R, Nariyapattu, Pallichandal, Jambai Sluices in Tiruvannamalai and Kallakurichi District.
2026_WRD_696570_1
01 2026 2027 MPB Division TVM Dated 18 08 2026
Open Tender
Civil Works
Lump-sum
180 days
Nariyapattu
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹3,000
21 Aug 2026
21 Aug 2026
9 Sept 2026
21 Aug 2026
8 Sept 2026
21 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Fabricating, Supplying and erection of Screw gearing steel shutters of size above upto 1.00 m width consist shutters of skin plate made out of 8mm thick mild steel plate and horizontally stiffened with 65x65x6mm mild steel Angle at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and provided with 8mm mild steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipment. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipment. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials consumables, labours power charges, conveyance charges for all equipment required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc., complete and as directed by departmental officers. | 4.03 | m2 | 57,527 | ₹2,31,833.81 |
| 2 | Fabricating, supplying and fixing of 50mm dia Screw Rod made up of Mild Steel duly machined and fully threaded to suit the Head set Assembly and provided with required holes. Conveying and leading the screw rod to the worksite. Fixing the screw rod to the shutter gusset plate with required bolt and nut in proper alignment to the head set including dismantling the existing damaged screw rod, conveying and stacking at section store. The Screw rod should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, conveyance charges for labours and materials and warranty for 5 years etc., complete and as directed by departmental officers. | 1.6 | RM | 12,280 | ₹19,648 |
| 3 | GST 18% in Figures | 1 | Tax | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.47 MB
Sdam8TenderDocument.pdf
Tender Documents • 0.58 MB
BOQ_837443.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].