REPAIRS AND PAINTING OF STEEL FURNITURE AT OFFICERS ACCN, MAIN BLDG, UNITS/ EST ETC AT FORT WILLIAM UNDER GE (FW) KOLKATA

Amount

ALMIRAH STEEL (LARGE) WITH SHELVES/1/2H 1/2S/ ALMIRAH LARGE STEEL GLASS DOOR DRAWING NO: F-67 (M), FD-1031, FD/E6/MAP/18, TP Dismantling/Taking out following old and un-serviceable Parts/ components of Almirah Large (Steel) with shelves and supply and fixing of new parts/components of appropriate size and shape all as shown on drawing and as directed by the Engr-in-charge.

Welding to broken joints of top and bottom smoothly to make correct shape of size with gas welding. Note:- Welding of broken /cracked joints shall be counted one point for one joint.

S&F Steel Hinges in replacement as per existing pattern.complete all as specified and directed .

Replacement of existing unserviceable bottom base leg with new bottom base leg duly painted with two coats of synthetic enamel paint over a coat of red oxide metal primer. MS sheet of leg shall be 1.00mm thick sheet by welding after removing unserviceable leg as specified and shown on drawing and as directed by Engr-in-Charge.

Replacement of broken handle with chromium plated mild steel handle with fitting as shown on drawing and making functional of locking device complete all as specified and directed .

Replacement of unserviceable lock with new mild steel lock 6 lever with duplicate keys complete all as specified and directed .

Replacement of unserviceable key plate & cover with new key plate with cover and fixed with screws for smooth use of key as shown on drg complete all as specified and directed .

S&F Inner side lock cover made out of 1.0 mm plain black iron sheet after removing existing unserviceable lock cover as specified and shown on drawing complete all as specified and directed .

Replacement of Cleats for shelves as per existing pattern. complete all as specified and directed .

Labour only for repair/denting/bending of shelf or shutter of Almirah large (Steel) with shelves as directed by the Engr-in-charge.

Replacement of locking Device (As per existing device) and making smooth functional for lock.

S&F Shelf made out of 1 mm thick plain black iron sheet as per shape & size or as shown on drawing duly painted with two coats of synthetic enamel paint over a coat of red oxide metal primer complete all as specified and directed .

Replacement of existing unserviceable steel rod with socket and fixed with new 20mm dia steel rod with socket in size and shape as specified and shown on drawing.

S&F 5mm thick glass including replacement of old one complete all as specified and as directed. (For Almirah large steel glass door only).

ALMIRAH STEEL (SMALL/ MEDIUM) WITH SHELVES/1/2H 1/2S DRAWING NO : FD-1032, FD-243 Dismantling/Taking out following old and un-serviceable Parts/components of Almirah medium (Steel) with shelves and supply and fixing of new Parts/ components of appropriate size and shape all as shown on drawing and as directed by the Engr-in-charge.

Welding to broken joints of top and bottom smoothly to make correct shape of size with gas welding. Note:- Welding of broken /cracked joints shall be counted one point for one joint.

S&F Steel Hinges in replacement as per existing pattern.

Replacement of existing unserviceable bottom base leg with new bottom base leg duly painted with two coats of synthetic enamel paint over a coat of red oxide metal primer. MS sheet of leg shall be 1.00mm thick sheet by welding after removing unserviceable leg as specified and shown on drawing.

Replacement of broken handle with chromium plated mild steel handle with fitting as shown on drawing and making functional of locking device.

Replacement of unserviceable lock with new mild steel lock 6 lever with duplicate keys complete all as specified and directed .

Replacement of unserviceable key plate & cover with new key plate with cover and fixed with screws for smooth use of key as shown on drg complete all as specified and directed .

S&F Inner side lock cover made out of 1mm Plain Black iron sheet after removing existing unserviceable lock cover as specified and shown on drawing complete all as specified and directed .

Replacement of Cleats for shelves as per existing pattern complete all as specified and directed ..

Labour only for repair/denting/bending of shelf or shutter of Almirah med (Steel) with shelves as directed by the Engr-in-charge.

Replacement of locking Device (As per existing device) and making smooth functional for lock complete all as specified and directed .

S&F Shelf made out of 1 mm thick plain black iron sheet as per shape & size or as shown on drawing duly painted with two coats of synthetic enamel paint over a coat of red oxide metal primer complete all as specified and directed .

LOCKER BED SIDE (STEEL), DRAWING NO : FD-1029 Dismantling /Taking out following unserviceable/ damaged Parts/ components of Locker bed side (Steel) and supply and fixing of new parts/components of existing specification and size to match as per drawing and as per sample, as directed by the Engineer-in-charge.

Replacement of unserviceable existing locks with new MS locks 6 lever with duplicate keys as per existing.complete all as specified and directed .

Replacement of unserviceable key plate and cover with new key plate with cover and fixed with screws for smooth use of key as per existing.complete all as specified and directed .

Replacement of locking Device (As per existing device) and making smooth functional for lock complete all as specified and directed .

Replacement of unserviceable existing handle CP with new handle CP 100mm long as per existing. complete all as specified and directed .

Replacement of unserviceable existing hinges with new hinges as per existing.

Replacement of existing unserviceable bottom base leg with new bottom base leg duly painted with two coats of synthetic enamel paint over a coat of red oxide (metal primer which shall be 1mm thick MS sheet) as specified and shown on drawing.

Removing of existing unserviceable handle and fixed with new MS pressed handle oval type stove enamelled 100mm long of pattern as approved complete all as specified and shown on drawing.

Replacement of existing unserviceable steel rod with socket and fixed with new 20mm dia steel rod with socket in size and shape as specified and shown on drawing.

Material and labour for welding/repair/re-fixing of hinges/shutter of locker bed side (Steel) as directed by the Engr-in-charge.

Sofa Set 5 Seater (2 single Seater & 1 Long Piece 3 Seater)

S & F of cushion seat and back, side arms, springs and approved leatherite/tapestry, coir cotton etc including SS/Wooden leg of sofa 3 single seater Make :- Godrej/Delite Hii tech model No D-Alpaina, Tigerm Urban, DMS perform, MEGA, Durian, Space, DMS WS or Local trade pattern of existing size and pattern the wooden surfaces with melamine polish complete all as specified and directed. Note :- Cost of tapestry cloth/leatherite shall not be less than Rs 630/- per Meter. Tint/shade of tapestry cloth/latherite shall be as directed by GE.

S & F of cushion seat and back, side arms, springs and approved leather/tapestry, coir cotton etc including SS/wooden leg of sofa single seater Make :- Godrej/Delite Hii tech model No D-Alpaina, Tigerm Urban, DMS perform, MEGA, Durian, Space, DMS WS or Local trade pattern of existing size and pattern the wooden surfaces with melamine polish complete all as specified and directed. Note :- Cost of tapestry cloth/leatherite shall not be less than Rs 630/- per Meter. Tint/shade of tapestry cloth/latherite shall be as directed by GE.

SOFA SET 4/5 SEATER [FD-281/373]

Removing of old / worn out unserviceable foam cushions and S&F of 100mm thick 40 density flexipuff foam of size 560 mm x 530 mm, foam encased in white long cloth as approved by Engr-in-charge/GE. Rest all as per drawing/complete all as specified and as directed.

M & L providing new tapestry cloth costing not less then Rs 550/- per meter of approved colour / shade / texture suitable for 560mm x 530mm x 100mm size foam cushion seat / back stitched three sides and provide best quality zip on one side for opening and closing suitable for sofa chairs as per drawing FD-281/FD-373 including taking out old unserviceable/wornout cloth complete all as specified and as directed.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg or as directed.

CHAIR VISITOR (TP) Make :- Godrej/Supremo/ Aristo/Aspire/LEOMA/Durian

Removing old unserviceable tapesty cloth of seat & back of Chair visitor and M&L tapestry cloth as per existing and best quality (coat of tapestry cloth not less than Rupees 350/-RM) with black PVC gutter edging to be fixed with screw in frame as per existing shape & size or complete all as specified and as directed by Engineer-in-charge. Note : 1. Seat and back shall be considered as one unit. 2. Tapestry cloth shall be as approved by the Engr-in-charge.

S&F 12mm thick moulded ply for Seat of Chair visitor as per existing BWR grade branded and of approved quality with necessary screw including replacement of old one complete all as specified and as directed.

S&F 12mm thick Moulded ply for Back of Chair visitor as per existing BWR gde branded and of approved quality with necessary screw including replacement of old one complete all as specified and as directed.

S&F 50mm thick foam cushion Seat for Chair visitor as per existing shape & size of 40 density, including replacement of old one complete all as specified and as directed.

S&F 50mm thick foam cushion Back for Chair visitor as per existing shape & size of 40 density, including replacement of old one complete all as specified and as directed.

S&F Arms of Chair visitor made out of plastic coated arms in black colour as per existing shape & size fixed with screws complete all as specified and as directed.

S&F PVC hard rubber plug top Standard quality of chair visitor as approved complete all as specified and as directed.

M&L preparing old steel or Iron Surfaces of any description by rubbing/scraping by using emery paper and applying two coats of Synthetic Enamel Paint (First Quality) black paint complete all as specified and as directed.

Chair executive revolving/High Back/Low Back all types Make :- Godrej/Supremo/ Aristo/Aspire/LEOMA/Durian

S & F in replace off Nylon caster wheel of chair revolving of Make :- Godrej/Supremo/ Aristo/Aspire/LEOMA/ Durian of existing size, shape, pattern complete all as specified and directed by Engr-in-Charge

S & F in replace off ABS seat with moulded PU foam and tapestry cloth of chair revolving of Make :- Godrej/Supremo/ Aristo/Aspire/LEOMA/Durian of existing size, shape, pattern complete all as specified and directed by Engr-in-Charge

S & F in replace off ABS back with moulded PU foam and tapestry cloth of chair revolving of Make :- Godrej/Supremo/ Aristo/Aspire/LEOMA/Durian of existing size, shape, pattern complete all as specified and directed by Engr-in-Charge

S & F in replace off Pneumatic with nylon caster wheels with complete steel base of chair revolving of Make :- Godrej/Supremo/ Aristo/Aspire/LEOMA/Durian of existing size, shape, pattern complete all as specified and directed by Engr-in-Charge

S & F in replacement off PU arms of chair revolving of make :- Godrej/Supremo/ Aristo/Aspire/ LEOMA/Durian of existing size, shape, pattern complete all as specified and directed by Engr-in-Charge

S & F in replace off Hydraulic with complete synchricnising assembly of chair revolving of Make :- Godrej/Supremo/ Aristo/Aspire/ LEOMA/Durian of existing size, shape, pattern complete all as specified and directed by Engr-in-Charge

Peg Table [Drawing No : FD-277, 384] Removing following unserviceable components from Peg Table and S&F new components as per the following and fixing the same without disturbing the other parts complete wherever shown on drawing and making functional the furniture as per drg and specification :-

M&L removal of unserviceable top of peg table in any position and S&F new table top made of 18mm thick MDF exterior grade, lamination (teak shade) with teak wood beading extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed by Engr-in-Charge.

Leg made out of 1st class hard wood (teak)

Top rail (shorter) made out of 1st class hard wood (teak)

Top rail (longer) made out of 1st class hard wood (teak)

PVC hard rubber shoe of approved quality

S & F Ist class Teak wood bracket as per suitable size triangular( 08 Nos in a table) fixed with screws. Complete all as specified.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg or as directed.

Table Writing [Drawing No : FD-27, 249, 33M, 275] Removing following unserviceable components from Table writing and supply and fix new components as per the following and fixing the same without disturbing the other parts complete wherever shown on drawing and making functional the furniture as per drg and specification :-

long rail made out of 1st class hard wood (teak)

short rail made out of 1st class hard wood (teak)

Leg made out of 1st class hard wood (teak)

complete Box of the table including shelf, left /right side, back ply made out of 18mm thick MDF exterior grade, lamination (teak shade)

Stiffnner made out of 1st class hard wood (teak)

Box back ply 6mm thick 3 ply commercial plywood conforming to IS-303 type BB duly polished

Front shutter made out of 18mm thick MDF exterior grade, lamination (teak shade) duly polished.

M&L removal of unserviceable top of table writing in any position and S&F new table top made of 18mm thick MDF exterior grade, lamination (teak shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed by Engr-in-Charge.

Drawer made of teak wood with 6mm thick 3 ply commercial plywood conforming to IS 303 type BB shall be provided bottom of drawer duly polished

steel Knob round (as per sample) recessed 38mm dia fixed with 20mm screw.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg or as directed.

CHAIR SCHOOL WITH HAND BOARD, DRAWING NO : FD/E6/MAP/05 & 6(R)

S&F PVC moulded seat and back to chair school with hand board including removing of old unserviceable moulded seat & back from the existing chair as per drawing and specification complete all as specified and as directed.

S&F Hand board made out of 18mm thick pre-laminated MDF board exterior grade including teak wood edging all round from the existing chair as per drawing and specification complete all as specified and as directed.

M&L Spot welding to any joints of legs and any parts of Chair school with hand board complete all as directed all as directed by the Engr-in-Charge. Note - Welding of broken/ cracked joints shall be counted one point for one joint.

S&F new clips for fixing of net

S&F Hard rubber shoe as per existing shape and size

Charpoy folding IP with plywood top [Drg No: FD-388(R)]

Welding to broken joints of charpoy IP folding and grinding for even and smooth gas welding and tightening with iron rivets complete all as directed by the Engr-in-Charge. (Note : Welding of each broken joints shall be counted as one point)

Removing of old worn out/unserviceable ply top and S&F 12mm thick 7 ply BWR grade type BB plywood in two pieces with 04 Nos (each pieces) 6mm dia countersunk round head bolts and nuts with washer in existing holes and tubular frame of charpoy.

Painting of Charpoy ip folding with two coats of synthetic enamel OG/black or as directed by Engr in charge after scrapping/cleaning surfaces by sand paper for smooth painting and legs provided with hard rubber toes before fixing the plywood hard top complete all as specified and directed.

BOOK CASE STEEL, DRAWING NO : FD-90, FD-1028

Replacement of unserviceable lock with new brass lock 6 lever with duplicate keys of make : Link/Harrison.

Replacement of broken handle with chromium plated mild steel handle 100mm long fitted with screw as shown on drawing

Repair to existing sliding channel shelves with denting and grease making functional for smooth running of Book Case steel.

S&F 3mm thick glass including replacement of old one complete all as specified and as directed.

RACK STEEL ADJUSTABLE 5/6 TIERS, DRAWING NO : FD-129(M)

S&F 8mm dia and 40mm long hexagonal round head bolts and nuts fixed to existing shelves of rack with replacement of old unserviceable nuts and bolts etc complete all as specified and as directed.

S&F 1mm thick MS sheet angle corner brackets of size 150mmx150mm of rack steel 5/6 tiers with HRH bolts and nuts of size 8mm dia x 40 mm long as in repair as shown on drawing complete all as specified and as directed.

S&F Mild steel shelves 1.25mm thick as per existing shape and size including two coats of Synthetic Enamel Paint (First quality) over a coat of red oxide /Zinc Chrome primer after preparation of surfaces with replacement of unserviceable shelves complete all as specified and as directed.

Removing existing unseviceable angle iron of rack steel and S&F new angle iron by gas welding 40x40x4mm thick of required length (Maximum upto 450mm) and shape all as specified and directed by Engr-in-Charge.

TABLE DINING ORs DRAWING NO : FD-165 Dismantling/taking out following unserviceable /damaged parts/components of table dining OR's and supply & fixing new parts/components, to be fitted all as shown on drawing and as per sample.

S&F Table top, made of 19mm/20 mm thick block board covered with 22 gauge aluminium sheet, as specified and shown on drawing including replacement of old one complete all as specified and as directed.

Long rail/ stiffener made of 25mm x 25 mm MS square tube of 16 gauge, duly welded, including applying two coats of black synthetic enamel paint over a coat of red oxide primer, as directed by the Engr-in-charge.

Short rail/ stiffener made of 25mm x 25 mm MS square tube of 16 gauge duly welded, including applying two coats of black synthetic enamel paint over a coat of red oxide primer as directed by the Engr-in-Charge.

Leg, made of 25mm x 25 mm MS square tube of 16 gauge, duly welded including applying two coats of black synthetic enamel paint over a coat of red oxide primer, as directed by the Engr-in-Charge.

S&F hard rubber shoe, suitable for table dining OR's as in repair complete all as directed by the Engr-in-Charge.

M&L Spot welding to any joints of legs, stiffeners, rails etc of table dining OR's complete all as directed all as directed by the Engr-in-Charge. Note - Welding of broken/ cracked joints shall be counted one point for one joint.

CHAIR DINING (MAP)[Drawing No FD/E6/MAP/10(R)] Removing following unserviceable components from chair dining (MAP) and S & F new components as per the following and fixing the same without disturbing the other parts shown on drawing and making functional the furniture as per drawing and specification :-

Rear leg made out of 1st class hard teak wood

Front leg made out of 1st class hard teak wood

Side rail made out of 1st class hard teak wood

Front Rail made out of 1st class hard teak wood

Rear rail made out of 1st class hard teak wood

Back rest made out of 1st class hard teak wood

Stiffener made out of 1st class hard teak wood

PVC hard rubber shoe standard quality

Top made out of 12mm thick BWR plywood and including S & F of new foam 75mm thick of 40 density with fabric on seat, as per existing or as directed.

M & L providing cover new tapestry cloth costing not less then Rs 550/- per meter of approved colour / shade / texture suitable for Chair Dining (MAP) [Drawing No FD/E6/MAP/10(R)] stitched three sides and provide best quality zip on one side for opening and closing suitable for chairs as per drawing above including taking out old unserviceable/wornout cloth complete all as specified and as directed.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg or as directed.

TABLE BED SIDE [Drg No: FD-276 & FD-265] Removing following unserviceable components from Table Bedside and S&F new components as per the following and fixing the same without disturbing the other parts and making functional the furniture as per drawing and specification :-

Top with 18mm thick pre-laminated MDF board exterior grade one side natural teak faced including teak wood beading on the top.

Side with 18mm thick pre-laminated MDF board exterior grade one side natural teak faced including teak wood beading around the side

Partition shelf made of 18mm thick pre-laminated MDF board

Back of 6mm thick ply wood commercial BWR with required size of screw all as specified and as directed by Engr-in-Charge.

Bed Hard Plywood Top with MNF Set [Drg No : FD-21(M), FD-246]

S&F Top of bed plywood made out of 12mm thick, 7 ply, grade BWR, type BB commercial ply (IS-303) including taking down old one complete all as specified and as directed. Make Archidply/Century Ply/ Green Ply

S&F Head Board with legs made of teak wood covered with 4mm thick plywood 3 ply BWR grade, type BB, with decorative face veneers on one face or as per drawing.

S&F Foot Board with legs made of teak wood covered with 4mm thick plywood 3 ply grade BWR, type BB, with decorative face veneers on one face including taking down old one complete all as per drawing

S&F new teak ply of head board front and back of Bed hard including taking down old one complete all as per drawing

S&F new teak ply of foot board front and back of Bed hard including taking down old one complete all as per drawing

S&F Long rail made out of Ist Class hard wood (Teak wood) including taking down old one complete all as per drawing

S&F Stiffener made out of Ist Class hard wood (Teak wood) including taking down old one complete all as per drawing.

S&F new L shape MS clamp as per suitable size rest all as specified and directed by Engr-in-charge.

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg or as directed.

TABLE BED SIDE [Drg No : FD/E6/MAP/15(R)] Removing following unserviceable components from Table Bedside and S&F new components as per the following and fixing the same without disturbing the other parts complete wherever shown on drawing and making functional the furniture as per drg and specification :-

Top with 18mm thick pre-laminated MDF board exterior grade one side natural teak faced including black colour PVC edging all round the top

Pull out tray small made of 18mm thick pre-laminated MDF board exterior grade one side natural teak faced (Rear and front sides) and 6mm thick commercial ply of BWR grade for bottom with recess handle of approved quality to pull out the tray.

Pull out tray large made of 18mm thick pre-laminated MDF board exterior grade one side natural teak faced (Rear and front sides) and 6mm thick commercial ply of BWR grade for bottom with recess handle of approved quality to pull out the tray.

Side with 18 mm thick pre-laminated MDF board exterior grade one side natural teak faced.

S&F Chromium plated Knob in place of old one

back ply of 6 mm thick commercial plywood of existing size complete all as specified and shown on drawing.

Hard rubber shoe of standard quality for leg

TABLE COMPUTER MAP [Drawing No : FD/E6/MAP/03] Removing following unserviceable components from table Computer and S&F new components as per the following and fixing the same without disturbing the other parts complete and making functional the furniture as per drg and specification :-

M&L removal of unserviceable top of table computer in any position and S&F new top made of 18mm thick prelamnated MDF board exterior grade, lamination (teak Shade) extended upto minimum 50mm from the bottom ege fixed in position all as specified and directed by Engr-in-Charge.

Key board tray of size 500 x 465mm thick make out of 18mm pre-laminated MDF board exterior grade for telescopic sliding channel.

Drawer made out of 18mm pre-laminated MDF board exterior grade for telescopic channel

New telescopic channel for pull out tray, drawer and key board tray of table computer as specified, shown in drg and directed by Engr-in-Charge

Middle shelf of existing size as specified, shown in drg and directed.

Bottom shelf of existing size as specified, shown in drg and directed.

Side panel of existing size as specified, shown in drg and directed.

Nylon buffers according to shape and size

25 x50mm rectangular PVC cover of existing size made to shape as specified, shown in drg and directed.

TABLE CENTRE [Drg No: FD-29M, FD-235 & FD-274] Removing following unserviceable components from Table Centre and S&F new components as per the following and fixing the same without disturbing the other parts including polishing complete wherever shown on drawing and making functional the furniture as per drg and specification.

M&L removal of unserviceable top of table centre in any position and S&F new table top made of 18mm thick MDF board exterior grade, lamination (teak Shade) with teak wood beading extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed by Engr-in-Charge.

Leg made out of 1st class hard teak wood

Top rail (shorter) made out of 1st class hard teak wood

Top rail (longer) made out of 1st class hard teak wood

S & F Ist class Teak wood bracket as per suitable size triangular( 08 Nos in a table) fixed with screws. Complete all as specified.

PVC hard rubber shoe of approved quality

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg or as directed.

BED HARD (MAP) DRG NO : FD/E6/MAP/08(R)

Removing of old unserviceable head board of bed hard and S&F with new one 18mm thick pre laminated MDF board exterior gde ISI mark with teak wood edging and to be fixed with machine screw as per drawing and specification complete all as directed by Engr -in-charge.

All as per item No 4.01 but foot board.

Welding to existing broken/cracked joints of bed hard and grinded for even and smooth gas welding complete all as directed by Engr -In-Charge. Note : Welding of broken/cracked joints shall be counted one point for one joint.

S&F of 8mm dia bolts and nuts and tighting the steel framing structure of bed hard as in repair as per drg and specification complete all as directed by Engr-in-Charge . Note One bolts and nuts shall be measured as one unit.

Removing of old unserviceable hard rubber shoe from leg and S&F with new one as per existing of approved quality complete all as directed by the Engr-in-Charge.

Removing of old unserviceable hard rubber cap from leg and S&F with new one as per existing of approved quality complete all as specified and directed.

Removing of old unserviceable top ply from bed hard and S&F 12mm thick ply wood (7 ply) commercial of BWR grade securing with drilling two holes of each stiffener 8mm dia round head counter sunk bolts and nuts with washer (08 Nos) as per existing shape and size complete all as directed by the Engr-in-Charge.

Table 900x600x760mm with/without drawer [Drg No : FD-41, 42, 241, 223, 224, 283, 284] Removing following unserviceable components from Table 900x600x760mm with/without drawer and S&F new components as per the following and fixing in position all as specified and directed by Engr-in-Charge.

M&L removal of unserviceable top of table in any position and S&F new table top made of 18mm thick MDF exterior grade, lamination (teak shade) with teak wood beading extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed by Engr-in-Charge.

Leg made out of 1st class hard wood (teak)

Long side rail made out of 1st class hard wood (teak)

Short side rail made out of 1st class hard wood (teak)

Drawer made of teak wood and 6mm thick 3 ply commercial plywood conforming to IS 303 type BB shall be provided bottom of drawer duly Frenck polished.

Steel Knob round (as per sample) recessed 38mm dia fixed with 20mm screw.

S & F Ist class Teak wood bracket as per suitable size triangular( 08 Nos in a table) fixed with screws. complete all as specified.

PVC hard rubber shoe of approved quality

M&L for applying two coat of wood polish high glossy/ French polish all exposed wood surface as per drg or as directed.

M/s Chandan Kumar Thakur (BID ID -3482300)

M/S MANOJ KUMAR BAL (BID ID -3482420)

M/S INSHA ELECTRICALS (BID ID -3482290)