REPAIR/ MAINT OF DG SETS, SECURITY LIGHTS EARTHING INFRASTRUCTURE AND ALLIED WORKS AT AF STN NARELA AND REPAIR/ MAINT OF INTERNAL WIRING/ LIGHT FITTING AND FIXTURES AND HOT WATER SYSTEM GEYSER FANS SUCH AS CEILING FAN WALL MOUNTED FAN EXHAUST FAN AND

Amount

Periodical, preventive and comprehensive maintenance of DG set of Cap 20 to 30KVA by Rep of authorised service centre as per manufacturer manual and checking of fuel supply system, Lubrication system, cooling system, battery ignition system and rectification of defect, inspection/ testing of engine and alternator for smooth functioning of the DG set and including the replacement of following :- (i) Fuel/ lube filters (ii) Coolant in radiator (iii) Testing and repair of engine control panel (iv) Descaling & Cleaning of radiator with proper acid circuation, minor repair of leakages to be rectified if any. (v) Hose pipe set (vi) Fuel pipe/ lubricant pipe (vii) Engine oil as per manufacturer specification (viii) Air filter/ By pass filter Make of DG set: Kirloskar Note: (i) The rates shall be deemed to be inclusive of visit of OEM after breakdown complaints and repairs. (ii) Worn out parts repair/replacement if any other than above shall be measured and paid separately.

Supply only following spare parts of DG set of kirloskar/Cummins DG set all as specified and directed.

V belt

Battery Terminal

Automatic Voltage Regulator for 20 to 30KVA DG set (Solid state voltage regulator type)

Battery lead 1 mtr long (Red for +ve, & Black for -ve)

Battery 12 volts, 120AH, maintenance free, complete all as specified and directed. Make: Exide/ Luminous/ Amara Raja Batteries/ Okaya

Selfstarter Motor 12V (DC) for 20 to 30 KVA Make: Lucas/TVS/ Cummins

Thermostat assembly of DG set cap 20 KVA to 30 KVA

Microprocessor based Genset controller for DG set 30/20 KVA

M&L for carrying out complete over hauling/ servicing of DG set panel/ AMF panel/ control panel including checking and rewiring of faulty electrical circuit using 1.5 Sqmm FRLS copper conductor for DG set of any type/make /capacity and making all electric connection and testing for smooth operation complete all as directed.

S&F of under/ over voltage relay 3 phase 415V for DG set of capacity upto 30 KVA complete all as directed.

S&F of fuse for DG Set of capacity upto 30 KVA complete all as specified and directed. Make-L&T/ ABB/ Havells

S&F of fuel pump for DG Set of capacity 30 KVA of kirloskar make as per manufacturer specifications and complete all as specified and directed.

S&F in replacement of off load changeover 100 Amps, 415V, 50 Hz, complete all as specified and directed. Make- L&T/ Schneider/ Havells

S&F in replacement of off load 63 Amps, 415V, 50 Hz, complete all as specified and directed. Make- L&T/ Schneider/ Havells

M & L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including using galvanised iron strip 25×4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth plate surrounded by packed layer of char coal dust and common salt, 15cm thick all around bottom and top and watering pipe 20mm bore of GI light grade with funnel, wire mesh and 40 mm dia GI protection pipe medium grade all as shown in electrical plate No 3 of SSR Part-I and connected to earthing test point, main switch board and testing on completion including excavation, earth work concrete pit with 80mm thick RCC cover in RCC 1:2:4 type B-1 duly reinforced with MS bars 8mm dia @ 150C/C both ways and pit chamber in PCC 1:2:4 type B-1 with 2 Nos suitable lifting handles of 12mm MS bar complete all as specified.

S&F in replacement of 25 to 63 Amps, 415V, 50 Hz, MNX Power contactor of coil voltage 240V complete all as specified and directed. Make- L&T/Schineider/Hvells

Taking down old unservicable any type street lights and refixing after repair of street light /security lights including cleaning of perplex cover where ever required and tightening of loose connection on the pole, Complete all as specified and directed.

Supply and Fixing of PVC 3 core PVC insulated Flexible copper cable 1.5 Sqmm/ core in size Black/Grey colour complete all as specified and as directed.

Supply and Fixing of PVC 3 core PVC insulated Flexible copper cable 4 Sqmm/ core in size Black/Grey colour complete all as specified and as directed.

Supply and Fixing of PVC 4 core PVC insulated Flexible copper cable 6 Sqmm/ core in size Black/Grey colour complete all as specified and as directed.

Taking down the unserviceable bracket and marerial & labour new bracket made out of 40/32 mm GI tubing light grade 1.5m lay bent to shape suitable for fixing of any type street light fitting fixed to steel/concrete pole with two MS clamps made out of 50 x 6 flat iron, 16mm dia bolts nuts and washers of suitable length all as specified and directed by Engr-in-Charge.

S&F Pole mounted cable Junction box weather proof of size 295mm x 225mm x 122mm outdoor type, with three phase and neutral, Alluminium bus bar 25mm x 4mm size and 01 No MCB 6A SP 10 KA including fixing with 02 Nos flat iron clamps of suitable size with necessary mild steel nuts & bolts complete all as specified and directed. Make: Hensel/ GE

S&F Electronic driver suitable for 45/60 watt LED security light complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing LED security light fitting 45 watt, suitable for 120 volts to 270 volts of system efficacy not less then 100 lumens/watt, having uniformaty ratio 0.25, high pressure die cast aluminium housing, heat resistant toughened glass with frame, IP66 protection comlete with lamp & connected items and connection with suitable cable from ceiling rose to light fitting and fixing on GI pipe bracket made out of suitable dia GI pipe medium grade 1.2mtr long bent to shape and fixed on wall with flat iron clamps, nut, bolts washer etc complete all as specified and as directed.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engr-in-Charge.

Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant/ complete with driver and lamp complete all as specified

S&F in repairs MCB TPN, 415V, 63 A, 10kA complete all as specified and as directed.Make:- L&T, Seimens, Schneider.

Supply and fixed as in repair MCCBs 415V,16KA, 4 Pole, 100 Amp with Adjustable thermal magnetic release as specified as directed.Make:- L&T, Seimens, Schneider.

Supply and fixed as in repair MCCBs 415V,16KA, 4 Pole, 125 Amp with Adjustable thermal magnetic release as specified as directed.Make:- L&T, Seimens, Schneider.

Supply, erecting and fixing, in true vertical position/ as strut, Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type type 410 SP-31 (9.00 metres long) complete with painting on exterior portion of pole with 2 coats of synthetic enamel paint over a coat of primer complete including taking out of existing pole all as specified and directed.

Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the pole/ inner wall confirming to ISI 14930 ( Part I and II) for protection of underground cables of size 50/38 mm outer/inner dia with all fittings. laid in trenches / road/ nallah or fixed along wall, poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified (excavation and earth work shall be measured and paid separately) Make: Rex/ Poly/ Gemini/ Tirupati Plasmatics ltd

Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the pole/ inner wall confirming to ISI 14930 ( Part I and II) for protection of underground cables of size 90/76 mm outer/inner dia with all fittings. laid in trenches / road/ nallah or fixed along wall, poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified (excavation and earth work shall be measured and paid separately) Make: Rex/ Poly/ Gemini/ Tirupati Plasmatics ltd

S&F automatic street light switch 3 Phase 415V 50 Hz comprising of power contactor of 32 Amp Capacity controlled by Nature switch type (Using infrared sensor technology), all accessories pre-wired suitable for 3 phase operation including MCCB 4 Pole 63 Amp 16 KA-01 Nos as incoming, all enclosed in suitable size thermoplastic poly carbonate enclosure confirming to IP 66 with suitable locking arrangement fixed to PCC/Steel tubular poles with necessary clamps made out of MS flat iron 30mm x 5mm thick alongwith provn of suitable cable entries etc complete all as specified and directed by Engr-in-charge. Make: Nature switch- Kakatiya, Bajaj, Healer. MCB/Contactors- BCH, L&T, Schneider. Enclosure- Hensel, GE, Walther.

M&L for shifting of existing steel tubular swaged poles complete with base plate, SMC box, light fitting, wire & accessories to install at new location as specified by augumenting necessary earth & concrete work PCC 1:4:8 in foundation and PCC 1:2:4 in coping complete all as specified and as directed.

Supply install commissioning and testing of outdoor LT Feeder pillar box outdoor type platform mounted suitable for 415 Volts 3 phase 4 wire 50Hz AC supply system of size 600x600x450 mm and 3.15 mmthick CRCA Sheet weather and vermin proof CPRI approved, IP 65 class protection with copper bus bar 400 Amps suitable for LT cable 1.1 KV 4 core of size upto 185 sqmm including provision of cable entries with glands locking arrangements, including provn of locks with 2 keys, powder coated finish over a coat of red oxide paints inside & outside and angle iron frame and legs of 90 cm long using 60x60x6 mm size MS angle iron fixed in floor in PCC 1:4:8 type D2 base of suitable size including neccessary excavation earth work including fencing with lockable gate complete all as specified and as directed.

Supply install commissioning and testing of outdoor LT Feeder pillar box outdoor type platform mounted suitable for 415 Volts 3 phase 4 wire 50Hz AC supply system of size 300x300x450 mm and 3.15 mmthick CRCA Sheet weather and vermin proof CPRI approved, IP 65 class protection with copper bus bar 250 Amps suitable for LT cable 1.1 KV 4 core of size upto 185 sqmm including provision of cable entries with glands locking arrangements, including provn of locks with 2 keys, powder coated finish over a coat of red oxide paints inside & outside and angle iron frame and legs of 45 cm long using 60x60x6 mm size MS angle iron fixed in floor in PCC 1:4:8 type D2 base of suitable size including neccessary excavation earth work including fencing with lockable gate complete all as specified and as directed.

Supply, laying, jointing and testing XLPE insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 Volts grade earthed system and conforming to IS : 7098 of 1995 and of size 3.5 core X 50Sqmm and laid in trenches/ducts/pipe or on poles complete all as specified and directed.

Supply, laying, jointing and testing XLPE insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 Volts grade earthed system and conforming to IS : 7098 of 1995 and of size 3.5 core X 70Sqmm and laid in trenches/ducts/pipe or on poles complete all as specified and directed.

Supply, laying, jointing and testing XLPE insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 Volts grade earthed system and conforming to IS : 7098 of 1995 and of size 3.5 core X95Sqmm and laid in trenches/ducts/pipe or on poles complete all as specified and directed.

Supply, laying, jointing and testing XLPE insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 Volts grade earthed system and conforming to IS : 7098 of 1995 and of size 4.0 core x 25Sqmm and laid in trenches/ducts/pipe or on poles complete all as specified and directed.

Supply, laying, jointing and testing XLPE insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 Volts grade earthed system and conforming to IS : 7098 of 1995 and of size 4.0 core x 16 Sqmm and laid in trenches/ducts/pipe or on poles complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed by EIC.

Taking down existing sub main wiring any size complete all as specified and directed.

M&L for Subwiring with two single core 4 Sqmm stranded copper conductor PVC insulated and unsheathed cable ISI marked drawn in 25 mm dia, medium grade, PVC conduit concealed in wall for sub main connection including 4.0 Sqmm PVC insulated unsheathed copper conductor ISI marked as earth wire complete all as specified and directed by Engr-in-charge.

M&L for Subwiring with two single core 6 Sqmm stranded copper conductor PVC insulated and unsheathed cable ISI marked drawn in 25 mm dia, medium grade, PVC conduit concealed in wall for sub main connection including 6.0 Sqmm PVC insulated unsheathed copper conductor ISI marked as earth wire complete all as specified and directed by Engr-in-charge.

Taking down carefully any type of battens or conduit point wiring with or without conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing surface complete all as specified and directed.

One light/fan point controlled by one, one way switches.

One bell point controlled by push button on same board with other switches.

One socket outlet point 3 pin 5 Amps on the same board.

One socket outlet point 3 pin 5 Amps on independent board.

Supply & fixing switch piano, flush type, 05 / 06 Amps, single pole, one way, 240 volts complete all as specified & directed. Make:- Anchor/ cona/SSK

Supply & fixing switch piano, flush type, 15 / 16 Amps, single pole, one way, 240 volts complete all as specified & directed. Make:- Anchor/ cona/SSK

Supply & fixing socket outlet 3 pin, 05 / 06 Amps, flush type, 240 volts complete all as specified & directed. Make:- Anchor/ cona/SSK

S&F for socket outlet flush type 2 in 1, 3 pin , 5 and 15 Amps complete all as specified and directed. Make:- Anchor/ cona/SSK

S&F bell push flush type switch, 5 Amp complete all as specified and directed by Engr-in-charge. Make:- Anchor/ cona/SSK

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed. Make : Anchor Roma/ Havells Crabtree/L&T.

One light/fan point/Exhaust fan controlled by one, one way switch 6 amps.

One bell point controlled by push button on the same board with other switch or independent.

One 5 pin, 5 Amp switch socket out let on the same board with other switches.

One 5 pin, 5 Amp switch socket out let on the independent board.

S&F modular switch flush type, 5 Amps, single pole, one way 1 module complete all as specified and directed . Make : Legrend/ABB/L&T

S&F modular switch flush type, 16 Amps, single pole, one way 1 module complete all as specified and directed . Make : Legrend/ABB/L&T

S&F modular socket , 5 pin, 5 Amps, multipurpose 2module complete all as specified and directed. Make : Legrend/ABB/L&T

S&F modular socket , 5 pin, 6/16 Amps, multipurpose 2module complete all as specified and directed. Make : Legrend/ABB/L&T

S&F ceiling rose, surface bakelite, size as per relevant IS, three terminals complete all as specified and directed. Make : Legrend/ABB/L&T

S&F modular fan step regulator 120W 2 module complete all as specified and directed. Make : Legrend/ABB/L&T

S&F in repair modular bell push switch complete all as specified and directed by Engr-in-charge. Make:- Legrend/ABB/L&T

S&F in repair Buzzer, Ding Dong AC 230volts complete all as specified and directed by Engr-in-charge. Make:- Legrend/ABB/L&T

S&F in repair lamp holder,insulated body, with back PVC rectangular block for fixing of holder with screw complete all as specified and directed.

M&L for extension to earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe as required 4mm dia galvanised iron or steel wire complete all as specified and directed.

M&L for wiring with (2x1.5+1x1.5) sqmm(nominal area) PVC insulated unsheathed single core multistranded copper conductor cable1100 volts grade concealed in Steel conduit with all fittings and accessories including MS clamp for mounting of flame proof switches/sockets etc, including 1.5sq mm copper multi stranded conductor cable earth continuity wire connected to earth dolly complete all as specified and directed.

S&F Switch flame proof rotary type with termination box in LM6,16A ,single pole 250 V complete all as specified and directed. Make: Sudhir/ Baliga/Shyaam Switchgear

S&F flame proof switch socket & plug combined in LM6 cable termination box in LM6 ,16 A 250V ,2P+ earth complete all as specified and directed. Make: Sudhir/ Baliga/Shyaam Switchgear

Supply and fixing LED light fitting 2x16 Watt flameproof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size. Make: Sudhir/ Baliga/Shyaam Switchgear

Taking down of MCB DB with MCB 's and making good disturbed surfaces of wall complete all as specified and directed.

S&F double door VTPN 4 way suitable for 4 pole MCCB as incoming & SP/TP MCB as outgoing, 200 Amps rated busbar, inter connection link, cable ties, earth bar etc complete all as specified and directed. Note:- (MCCB & MCB to be measured and paid seperately) Make : L&T/Schneider/Legrand/Hager

S&F MCB DB sheet enclosure Double door, single pole and neutral 240V with 100 Amp suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 4 way complete all as specified and directed. Make : L&T/Schneider/Legrand/Hager

S&F MCB DB sheet enclosure Double door, single pole and neutral 240V with 100 Amp suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed. Make : L&T/Schneider/Legrand/Hager

S&F MCB DB sheet enclosure Double door, single pole and neutral 240V with 100 Amp suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 12 way complete all as specified and directed. Make : L&T/Schneider/Legrand/Hager

S&F in repair single pole and neutral enclosure with 2 pin plug and socket with one MCB 20 Amp complete all as specified and directed. Make : L&T/Schneider/Legrand/Hager

S&F MCCB 100Amps, 415Volt , 4pole breaking capacity 16 KA complete all as specified and directed. Make : L&T/Schneider/Legrand/Hager.

S&F MCB, TP 25 To 63 Amp, 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning.

S&F MCB, single pole & neutral, 240 Volts 32 Amps,10KA 'C' Curve, complete all as specified and directed. Make : L&T/ Schneider/Legrand/Hager

S&F MCB, single pole, 240 Volts (05 to 32) Amps,10KA 'C' Curve, complete all as specified and directed . Make : L&T/Schneider/ Legrand/Hager

Taking down light fitting any description complete all as specified and directed .

Supply and fixing LED lights fitting 1x 20W, 220V, worm white/white (as required) AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make :- Phillips/Wipro/Orient/Ashram

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make :- Phillips/Wipro/Orient/Ashram

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make :- Phillips/Wipro/Orient/Ashram

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. Make :- Phillips/Wipro/Orient/Ashram

S&F LED light fitting 1x9W/ 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size

Supply and fixing LED Building security light/ street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Make :- Phillips/Wipro/Orient/Ashram

Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete. Note: Sample of light fitting should be approved from Engr in Charge prior to installation.

S&F in replacement warm/cool white ground burial light upto 9 watt made of water resistant material, one way focus at tree or wall, IP 65 protection with driver inbuilt and compact design complete all as specified and directed. Make: Philips, Jaquar, havells

S&F in replacement LED Wall light two way with conical focus 6 watt warm white waterproof IP65 suitable to fix outdoor/indoor, aluminium body complete all as specified and directed. Make: Philips, Jaquar, havells

S&F aesthetically designed muziris decorative warm white LED picture/mirror light of 8-10, watt, PF>0.95, min efficiency 100 lumen/watt, IP20 rating CCT 3000K fixture with bronze finish for superior feel complete all as specified and directed. Make: Lusture Cat part No LI-36002-8,Philips cat part No 48043 or equivalent in Bajaj, Crompton.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store,

Hanging only ceiling fan after repair and connecting up including provision of cable from ceiling rose or connector to fan

M&L Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.

M&L for rewinding of following fans with same gauge of super enameled copper wire complete,varnishing ,baking , connecting properly with sleeves assembling the same including replacement of unserviceable shackle and clamps with nots /bolts/washer /split pin and blade screws etc testing,complete all as specified and directed. NOTE: (i) Spare parts like bearing,capacitor,bushes if required will be measured and paid separately. (ii) The rates shall be deemed to include dismantling of fan and reassembling after repair /replacement of worn out parts.

Ceiling fan 1200 /1400 mm sweep

Exhaust fan 300 mm sweep

Exhaust fan 450 mm sweep

Wall mounted fans 400 mm /450mm sweep

Supply only new metal bush bearing made out of gun metal/brass of same size suitable for ceiling fans,wall mounted fan and exhaust fans complete all as specified and directed.

Supply only ball bearing suitable Ceiling fan 1200 /1400 mm sweep: make NBC/SKF/Tata

Supply only ball bearing suitable Exhaust fan 300 mm sweep : make NBC/SKF/Tata

Supply and fix new wall mounted fan motor single phase 240 Volt 50Hz .

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated Make:- USHA, Orient, Havells, Bajaj

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers. Make:- USHA, Orient, Havells.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz RPM 1200, Copper winding of sweep 300m. Make:- USHA, Orient, Havells.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element of 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc. Make:- USHA, Orients, Havells.

Supply only Heating element (round/ triangular) of size 1.5/2 KW. Make :- Theeta/Racold/Bajaj

Supply only Thermostat for 25 ltrs capacity geyser. Make :- Theeta/Racold/Bajaj

Supply only Rubber Gasket for Inner Tank 25 Ltrs Capacity.

Supply only Air release Valve for 25 Ltrs capacity .

Supply only Fusible lead nut for safety pressure of existing type.

Supply only Indicator Lamps for Geyser.

Supply only Geyser assembly for 25 ltr

Supply only PVC connections 15 mm size with PTMT nuts of up to length 600 mm length (for hot and cold water inlet and outlet ) complete.

Supply and fix Outdoor LED Bollard light fixture having Built-in-Driver & construction details as follows: Housing: Metal & Aluminium & clear optical cover. Product size not less than: 815x140x105 mm.System lumen output (840lm) and a system wattage of 12 watt, Colour (Anthracite).The luminaire should have a color temperature of 3000K.The luminaire shall meet Dust proof and water resistance IP65 & IK08 potection & voltage range protection from 140V-360V with inbuilt 2.5 KV SPD Surge protection. Power factor>0.8.fixure must be in Compliance to IEC 60598-1, IS 10322 (Part5/Sec1).

Supply and fixing LED BULB 1x 20W, 220V, worm white/white (as required) AC including connecting up bulb holder complete. Make :- Phillips/Wipro/Orient/Ashram

Supply and fixing LED BULB 1x 9/10W, 220V, worm white/white (as required) AC including connecting up bulb holder complete. Make :- Phillips/Wipro/Orient/Ashram

M/S Anand Enterprises (BID ID -3489470)

sheetal engineering (BID ID -3489556)

JAIPAL AND BROTHERS (BID ID -3489629)