Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹94,000
Closing Date
5 Jun 2026, 6:00 pmDue today
GE (NW) Mankhurd
GE (NW) Mankhurd
CERTAIN REPAIRS TO SUNKEN FLOOR, LEAKAGE SEEPAGE OTHER MISC CIVIL WORKS AND OTHER MAINT WORKS AT SPDC, WED, DSRV NSD MANKHURD UNDER GE (NW) MANKHURD.
2026_MES_765679_1
8566/E8
Open Tender
Civil Works
270 days
GE (NW) Mankhurd
As per tender document
8 documents required · 8 mandatory
₹500
GE (NW) Mankhurd
₹94,000
Yes
15 May 2026
15 May 2026
8 Jun 2026
15 May 2026
5 Jun 2026
29 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | S&F Pre- painted galvalume sheet having aluminum zinc coating with hot dip alloy GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fastners etc. completely all as specified and directed. upto maximum height of 20 Mtr including scaffolding and all safety equipments if required including Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings as specified.
Note : No additional payment on any account will be considered and only plan area whatever have been provided will be measured. Rate quoted maybe considered including of bending for specific curvature as provided in existing building. | 290 | Sqm | - | - |
| 2 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet in ridge 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified upto maximum height of 20 Mtr including scaffolding and all safety equipments if required including Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings as specified.
Note : No additional payment on any account will be considered and only plan area whatever have been provided will be measured. Rate quoted maybe considered including of bending for specific curvature as provided in existing building. | 70 | Sqm | - | - |
| 3 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 290 gde E-165 including of dismantling of old iron or mild steel work of any description and removing from site complete all as specified and as directed by EIC. | 800 | Kg | - | - |
| 4 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors, Gates including Hold fast & Aldrop and related items; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 including of dismantling of old iron or mild steel work of any description and removing from site complete all as specified and as directed by EIC. | 400 | Kg | - | - |
| 5 | S&F as in repairs for 1.0mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 with welded or soldered joints including dismantling of old sheet of any thickness complete all as specified and directed by EIC. | 80 | Sqm | - | - |
| 6 | M & L for preparation of old steel surfaces of any description over 10cm width or girth & applying one coat of aluminium paint complete all as specified. | 3,500 | Sqm | - | - |
| 7 | Taking down rolling shutters area n.exc 10 sqm each and re-fixing to its original position after cleaning all parts, straightening rails, changing damaged strips, bottom rail,guide rail, helical spring worm gear, lock plate etc as required, greasing, oiling, servicing for smooth functioning of all parts complete all as directed.
Note: Lath strips, bottom rail, spring,gears etc. will be measured and paid separately as supply only | 5 | Each | - | - |
| 8 | All as per item above but area of rolling shutter exc 10Sqm and n.exc 20 Sqm each | 25 | Each | - | - |
| 9 | All as per item above but area of rolling shutter exc 20Sqm and n.exc 40 Sqm each | 5 | Each | - | - |
| 10 | Supply only mild steel spring made out of 6mm to 11mm dia high tension steel wire confirming to IS 4454 having 65 to 100 helical for rolling shutter for smooth working complete all as specified and directed (dia of spring 100mm to 150mm) | 20 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.23 MB
8566TENDERPAGES.pdf
Tender Documents • 0.71 MB
BOQ_857540.xls
BOQ • 0.49 MB
Download all tender documents and submit your bid