Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹9.8 L
EMD Value
₹19,660
Closing Date
25 Jan 2025, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Engine Division, Koraput
HINDUSTAN AERONAUTICS LIMITED Engine Division, Koraput, Sunabeda- 763002
SUPPLY AND FIXING OF ALUMINIUM WORK IN RUBBER SECTION DI CONFERENCE HALL AND LAB AUDITORIUM BUILDING IN ENGINE DIVISION KORAPUT
8263
E TENDER NOTICE W-09/24-25
Works
Mig Complex- Engine Divn-Koraput-Civil
₹0
₹19,660
25 Jan 2025
27 Jun 2024
27 Jun 2024
25 Jan 2025
Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless steel butt hinges (heavy weight) 100x60x2.5 mm with necessary screws (heavy weight) etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing 12mm thick Pre-laminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per drawings and directions of engineer-in-charge etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing with frosted glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the drawings. (Cost of aluminium snap beading shall be paid in basic item) etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) etc. all complete as per specification and direction of Engineer-in-charge.
Taking out doors, windows and clerestory window shutters (steel or wood) of area 3 sq. metres and below including stacking within 50 metres lead etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing 125mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing aluminium tower bolts, 200x10mm ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing IS : 12817 marked stainless steel butt hinges 100X58X1.90 mm with stainless steel screws etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing aluminium hanging twin floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing 300x10mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. all complete as per specification and direction of Engineer-in-charge.
Supplying and carrying to site all approved materials and providing 15 mm thick plastering in single or half brick wall or any other surface of mix (1:4) 1:4 (1 cement: 4 fine sand) including taking out old damaged plaster if required etc. all complete as per specification and direction of Engineer-in-charge.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth etc. all complete as per specification and direction of Engineer-in-charge.
Supplying , carrying to site all approved materials and painting two or more coats of synthetic enamel paint of approved brand and manufacture to achieve even shade and making the surface absolutely free from any spots , scales , fungus etc. including erection of safe scaffolding , cleaning / washing etc. all complete as per specifiaction and direction of Engineer -in - charge.
Supplying , carrying to site all approved materials and applying 2 coats of Wall painting with premium acrylic emulsion paint of interior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and making the surface absolutely free from any spots , scales , fungus etc. including erection of safe scaffolding , cleaning / washing etc. all complete as per specifiaction and direction of Engineer -in - charge.
Total
I / We hereby quote percentage above (+) or below (-) the Estimated cost
Sub Total Works Amount
ADD GST @ 18% (( IGST18%) or (CGST @ 9% +SGST@ 9%)), Whichever is applicable
GRAND TOTAL
Note : (i) : It is a percentage rate tender. Hence the tenderers are required to quote rates on percentage basis i.e. above or below the estimated cost put to tender. (ii) The quoted rates in the bill of quantities are inclusive of all types of taxes, duties levies, fees and charges etc., imposed by Central/ State Govt. and local bodies Compensation Cess, Labour Cess, Custom Duty, royalties and other levies. It shall also include all other costs including loading, un-loading, insurance, transportation, testing and Certification expenses except GST . GST at the prevailing percentage is added in the BOQ at the end.
GOODS AND SERVICE TAX (GST)
Bidder should indicate GSTIN No. (Copy of GST registration to be enclosed) and PAN No. (copy of PAN to be enclosed).
Tender will be considered/ accepted, if & only if the vendor has a valid GST Registration No
Central Tax/ State Tax/ Integrated Tax/ Union Territory tax to be quoted as per GST Law
Bidders to ensure correct applicability of Central Tax/ State Tax/ Integrated Tax/ Union Territory tax based on the Inter / Intra state movement Supply of goods and provision services or both
Bidder shall mention the SAC Code/HSN Code for goods and services in accordance with GST law in their Bid and subsequently in their tax invoice. HAL, Koraput Division shall not be responsible for any error in SAC Code/HSN Code for goods and/or services specified by supplier/contractor
The Tax Invoice for supply of Goods & Services should be raised as per the provision of GST Act & Rules and must compulsorily mention the following
a. HAL, Korpaut Division GST registration number as 21AAACH3641R1ZJ
b. Name & address of supplier / Vendor/ Contractors
c. GSTIN of Supplier / vendors / Contractors
d. Consecutive Serial Number & date of issue
e. Description of goods or services
f. Total value of supply
g. Taxable value of supply
h. Tax Rate – Central Tax & State Tax or Integrated Tax, Cess
i. Amount of Tax charged
j. Place of supply
k. Address of delivery if different from place of supply
l. Signature of authorized signatory
Reimbursement of GST to the vendor is contingent upon complying with the following condition by the service provider
i. Uploading the (invoices raised on HAL, KoraputDivision ) onward GST Return (GSTR-1) in GSTN Network portal within the statutory time period
ii. Discharging the GST tax liability to the Government.
iii. Submission of Tax Invoice to HAL, Korpaut Division.
iv. Submission of proof of payment of GST to HAL, Korpaut Division.
v. Receipt of goods / services by HAL Koraput Division.
vi. Availment of Input Tax Credit by HAL, Korpaut Division .
In case GST credit is delayed/ denied to HAL, Korpaut Division, due to non/delayed receipt of goods and/or services and/or tax invoice or expiry of timeline prescribed in GST Law for availing such ITC, or any other reason not attributable to HAL, Korpaut Division, GST amount shall be recoverable from Vendor along with interest & penalty levied/ leviable on HAL, Korpaut Division, as the case may be
In case vendor delays declaring such invoice in his return and GST credit availed by HAL, Korpaut Division is denied or reversed subsequently as per GST law, GST amount paid by HAL, Korpaut Division towards such ITC reversal as per GST law shall be recoverable from vendor/contractor along with interest & penalty levied/ leviable on HAL, Korpaut Division.
In case of discrepancy in the data uploaded by supplier in the GSTN portal or in case of any incomplete work/service, then HAL, Korpaut Division will not be able to avail the tax credit and will notify the supplier of the same. Supplier has to rectify the data discrepancy in the GSTN portal or issue credit note (details to be uploaded in GSTN portal).
For any such delay in availing of tax credit for reasons attributable to vendor (as mentioned above), interest as per the GST Act & Rules, along with penalty, if any will be deducted for the delayed period i.e. from the month of receipt till the month tax credit is availed, from the running bills.
Penalty amount so determined along with GST if applicable thereon shall be recovered from the contractor.
Any reduction in rate of Tax on any supply of goods or services or the benefit of input tax credit shall be passed on to the recipient by way of commensurate reduction in prices. Bidders have to submit declaration in their bid that they have complied with ‘Anti-profiteering clause’ under GST law.
The bidder’s quoted rates/ price should be after considering the Input Credit under GST law at their end, since GST on output (GST amount charged in Invoice) will be paid by HAL.
In case any changes in taxes and duties as per Gov. Notification (including GST), the same shall be applicable from time to time.
Quarters will be allotted to the awarded agency subject to availability & recommendation from the E-I-C/ O-I-C for which rents as applicable will be recovered from the running bills of the agency.
SCHEDULE-A
HINDUSTAN AERONAUTICS LIMITED
KORAPUT DIVISION
CENTRAL CONTRACT CELL
COMMERCIAL BID
BILL OF QUANTITIES FOR THE WORK OF:- "REPAIR AND RENOVATION WORKS INSIDE VARIOUS ROOMS OF HAL INDUSTRIAL HEALTH CENTRE"
LINE NO : KPTCC/W/391
NAME OF THE AGENCY :
Labour charges for Dismantling tile work in floors and roofs for thickness of tiles above 25 mm and up to 40 mm laid in cement mortar including stacking material within 50 metres lead etc. all complete as per specification and direction of Engineer-in-charge.
Labour charges for demolishing cement concrete of nominal concrete (1:3:6) or richer mix manually/ by mechanical means including disposal of material within 50 metres lead etc. all complete as per specification and direction of Engineer-in-charge.
Labour charges for Dismantling old tile/ plaster or skirting including tile raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead etc. all complete as per specification and direction of Engineer-in-charge.
Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources)etc. excluding form work etc. all complete as per specification and direction of Engineer-in-charge.
Providing and laying Glazed Vitrified tiles Matt/Antiskid finish tiles of size 600x600mm in floor (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. all complete as per specification and direction of Engineer-in-charge.
Supplying and carrying to site all approved materials, Providing and constructing Brick work with flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in conforming to IS:12894 of required thickness for walls or any other places in all heights in CM (1:4) with straight or curved with rection of safe / rigid scaffolding and curing etc. all complete as per standard specification and as directed by Engineer - in - Charge.
Supplying, carrying to site all approved materials and plastering with 15 mm thick cement plaster on brick wall of mix 1:4 (1 cement: 4 coarse sand) etc. all complete as per direction of Engineer in charge.
Providing and fixing floor mounted, white vitreous china single piece,double traps syphonic water closet of approved brand/make, shape,size and pattern including integrated white vitreous china cistern ofcapacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap etc. all complete as per specification and direction of Engineer-in-charge.
Supplying, carrying to site all approved materials and fixing PTMT towel rail 600 mm long with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing 15mm C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing 15mm C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing 15mm C.P. brass angle valve stop cock of standard design and of approved make conforming to IS:8931 etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing. 35 mm thick factory made Solid panel PVC Door shutter,non decorative finish(matt finish) made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner.Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile.The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.
Providing and fixing 100 mm nominal dia PTMT grating of approved quality and colour etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing 110mm diameter single socketed pipes on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing of unplasticised PVC connection pipe with brass PTMT unions 15mm nominal bore of 30cm length etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing on wall face unplasticised - PVC moulded 110mm dia. 87.5° bend for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all complete as per specification and direction of Engineer-in-charge.
Applying of two or more coats acrylic emulsion paint over wall,/ceiling having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required,to achieve even shade and colour etc. all complete as per specification and direction of Engineer-in-charge.
Applying one or more coats of painting with high gloss synthetic enamel paint on wood surface / Steel surface of approved brand and manufacture of required colour to give an even shed. The work shall include preparation of surface by using wire brush, sand / emery papers, cleaning, removal of mill scale and rust, and applying paint to get uniform finish without any patches including erection of safe / rigid scaffolding, cleaning the area after painting etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing White Vitreous China Flat back wash basin of size 550x400 mm. wash basin is including with C.I. brackets, single 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing 30mm factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof an fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) etc. all complete as per specification and direction of Engineer-in-charge.
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources graded stone aggregate 20 mm nominal size derived from natural sources) etc. all complete as per specification and direction of Engineer-in-charge.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve (TMT bars of grade Fe500D or more) etc. all complete as per specification and direction of Engineer-in-charge.
Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish. Granite stone slab of any colour except black, cherry/ ruby red etc. complete (area of slab over 0.50 sqm) etc. all complete as per specification and direction of Engineer-in-charge.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) etc. all complete as per specification and direction of Engineer-in-charge.
Supplying carrying to site all approved material and providing float glass panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm) etc. all complete as per specifiaction and direction of Engineer - in - charge.
Providing and fixing 12mm thick particle board pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick etc. all complete as per specifiaction and direction of Engineer - in - charge.
Labour charges for demolishing brick work or stone boulder masonary in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead etc. all complete as per specifiaction and direction of Engineer - in - charge.
Supplying carrying to site all approved materials ,providing and fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified etc. all complete as per specifiaction and direction of Engineer - in - charge.
Supplying carrying to site all approved materials, providing and fixing C.P brass 2 way bib cock with wall flange along with all necessary accessories complete incluring cutting, making good the walls , floors, slab wherever required etc. all complete as per specifiaction and direction of Engineer - in - charge.
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required of size 610x460 mm bowl depth 200 mm etc. all complete as per specifiaction and direction of Engineer - in - charge.
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. all complete as per direction of Engineer in charge.
Supplying, carrying to site all approved materials and fixing in position Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading etc. all complete as per direction of Engineer in charge.
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms etc. all complete as per direction of Engineer in charge.
Providing and fixing 150 mm diameter C.P. brass shower rose with 15 or 20 mm inlet all complete as per direction of Engineer in charge.
Total
I / We hereby quote percentage above (+) or below (-) the Estimated cost
Sub Total Works Amount
ADD GST @ 18% (( IGST18%) or (CGST @ 9% +SGST@ 9%)), Whichever is applicable
ADD CESS @ 1%
GRAND TOTAL
Note : (i) : It is a percentage rate tender. Hence the tenderers are required to quote rates on percentage basis i.e. above or below the estimated cost put to tender. (ii) The quoted rates in the bill of quantities are inclusive of all types of taxes, duties levies, fees and charges etc., imposed by Central/ State Govt. and local bodies Compensation Cess, Labour Cess, Custom Duty, royalties and other levies. It shall also include all other costs including loading, un-loading, insurance, transportation, testing and Certification expenses except GST . GST at the prevailing percentage is added in the BOQ at the end.
GOODS AND SERVICE TAX (GST)
Bidder should indicate GSTIN No. (Copy of GST registration to be enclosed) and PAN No. (copy of PAN to be enclosed).
Tender will be considered/ accepted, if & only if the vendor has a valid GST Registration No
Central Tax/ State Tax/ Integrated Tax/ Union Territory tax to be quoted as per GST Law
Bidders to ensure correct applicability of Central Tax/ State Tax/ Integrated Tax/ Union Territory tax based on the Inter / Intra state movement Supply of goods and provision services or both
Bidder shall mention the SAC Code/HSN Code for goods and services in accordance with GST law in their Bid and subsequently in their tax invoice. HAL, Koraput Division shall not be responsible for any error in SAC Code/HSN Code for goods and/or services specified by supplier/contractor
The Tax Invoice for supply of Goods & Services should be raised as per the provision of GST Act & Rules and must compulsorily mention the following
a. HAL, Korpaut Division GST registration number as 21AAACH3641R1ZJ
b. Name & address of supplier / Vendor/ Contractors
c. GSTIN of Supplier / vendors / Contractors
d. Consecutive Serial Number & date of issue
e. Description of goods or services
f. Total value of supply
g. Taxable value of supply
h. Tax Rate – Central Tax & State Tax or Integrated Tax, Cess
i. Amount of Tax charged
j. Place of supply
k. Address of delivery if different from place of supply
l. Signature of authorized signatory
Reimbursement of GST to the vendor is contingent upon complying with the following condition by the service provider
i. Uploading the (invoices raised on HAL, KoraputDivision ) onward GST Return (GSTR-1) in GSTN Network portal within the statutory time period
ii. Discharging the GST tax liability to the Government.
iii. Submission of Tax Invoice to HAL, Korpaut Division.
iv. Submission of proof of payment of GST to HAL, Korpaut Division.
v. Receipt of goods / services by HAL Koraput Division.
vi. Availment of Input Tax Credit by HAL, Korpaut Division .
In case GST credit is delayed/ denied to HAL, Korpaut Division, due to non/delayed receipt of goods and/or services and/or tax invoice or expiry of timeline prescribed in GST Law for availing such ITC, or any other reason not attributable to HAL, Korpaut Division, GST amount shall be recoverable from Vendor along with interest & penalty levied/ leviable on HAL, Korpaut Division, as the case may be
In case vendor delays declaring such invoice in his return and GST credit availed by HAL, Korpaut Division is denied or reversed subsequently as per GST law, GST amount paid by HAL, Korpaut Division towards such ITC reversal as per GST law shall be recoverable from vendor/contractor along with interest & penalty levied/ leviable on HAL, Korpaut Division.
In case of discrepancy in the data uploaded by supplier in the GSTN portal or in case of any incomplete work/service, then HAL, Korpaut Division will not be able to avail the tax credit and will notify the supplier of the same. Supplier has to rectify the data discrepancy in the GSTN portal or issue credit note (details to be uploaded in GSTN portal).
For any such delay in availing of tax credit for reasons attributable to vendor (as mentioned above), interest as per the GST Act & Rules, along with penalty, if any will be deducted for the delayed period i.e. from the month of receipt till the month tax credit is availed, from the running bills.
Penalty amount so determined along with GST if applicable thereon shall be recovered from the contractor.
Any reduction in rate of Tax on any supply of goods or services or the benefit of input tax credit shall be passed on to the recipient by way of commensurate reduction in prices. Bidders have to submit declaration in their bid that they have complied with ‘Anti-profiteering clause’ under GST law.
The bidder’s quoted rates/ price should be after considering the Input Credit under GST law at their end, since GST on output (GST amount charged in Invoice) will be paid by HAL.
In case any changes in taxes and duties as per Gov. Notification (including GST), the same shall be applicable from time to time.
Quarters will be allotted to the awarded agency subject to availability & recommendation from the E-I-C/ O-I-C for which rents as applicable will be recovered from the running bills of the agency.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NIT09.pdf
TENDER_DOCUMENT • 1.44 MB
NEWGCC2023.pdf
TENDER_DOCUMENT • 2.92 MB
AM.pdf
TENDER_DOCUMENT • 5.21 MB
PERCENTAGEBOQ391.pdf
TENDER_DOCUMENT • 0.10 MB
PBOQ387.pdf
TENDER_DOCUMENT • 0.09 MB
EPS.pdf
TENDER_DOCUMENT • 0.02 MB
EPS_2.pdf
TENDER_DOCUMENT • 0.02 MB
PBO387.xlsm
TENDER_DOCUMENT • 0.03 MB
UNDERTAKING.pdf
TENDER_DOCUMENT • 0.04 MB
UNDERTAKING_2.pdf
TENDER_DOCUMENT • 0.04 MB
CBO391.xlsm
TENDER_DOCUMENT • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .